Measuring Point History

Hi! Experts
We are working with MAM25 SR5 and we have the following quastion regarding measure point history:
Currently we can see only one history document on the PDA. It is the last one that was registered on the system. But my  users want to see at least the last 3 ones if they already exist on the backend system. Is it possible ?? how can we show it ??
Backend:
The perform general setting
Measuring Points:
Variant:   XXXXXXX
Vianta:    YYYYYY
We did active the ckeck box Last Meas. Document in order to get it on the history parton the PDA.
My questions are:
1. Should I take that check box out in order to get more than one historic information ???
2. Where should I control how many historic documents I want to see on the PDA ??
Thank you very much
Xiomara Aramendiz

Hi Xiomara,
have a look into SPRO - there you should see the question if you want the history or not. And related to that you can enter how many you like to see.
If that is not the case in your system, then simply enhance the GETDETAIL handler for this object to return more then the last history.
Hope this helps.
Regards,
Oliver

Similar Messages

  • CS module - Measuring Point

    Dear All,
    How to delete Measuring point of an equipment for which already measuring document is created?
    Regards,
    Samir

    Dear Samir,
    You can inactive the measuring point so that further measuring document creation is not possible. And it be available in equipment for history.
    Follow the steps:
    1) Run the transaction IK02.
    2) Enter the measuring point number.
    3) Select the following path: Measuring Point (Menu Bar) ->   Functions->    Active<-->Inactive-> Inactive
    4) Try for creating meas. doc., it will not be possible for this meas. point.
    Regards,
    Sundar Desai

  • Graph of Measurement points and a charecteristic vs time

    Hi SAP Masters,
    I am currently having a problem and I hope you can help me to solve this. I am trying to create a graph where I can compare one of  my Design data which is in my characteristic against the graph that i can generate from the measurement point vs time graph.
    How can I add the characteristic into this graph?
    And How does SAP know that which two column should be used for the graph? I know It can add a secondary y-axix but doesn't allow me to chose any data for that axis.
    My objective is to compare the measurement point data(movement) vs time with the design data(design movement). I can generate a column graph of movement vs time from the measurement points and I can display it over last couple of years. but if I can show design movement along with the measurement point movement then it is good for us to see if it is more than design movement stored in the classification tab of the Floc.
    thank you
    Edited by: sam1188 on Mar 16, 2011 2:24 AM
    Edited by: sam1188 on Mar 16, 2011 1:48 PM

    If you've been charged twice for the purchase (you didn't click on 'buy' twice and it appears twice on your purhcase history ?) then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Function Modules for creation of characteristics and Measurement Points

    Hello everybody
    I'm new in ABAP (trainee) and especially the use of characteristics. I'd be very happy if somebody could help me :).
    Can anybody out there with some experience in creating characteristics and measurement points tell me how to create them with function-modules or by changing database tables?
    I'm happy about every hint and ready to give some reward points.
    Best Regards,
    Steffen

    FM and TABLES
    http://72.14.235.104/search?q=cache:71IXBMWcX_8J:reflexcontracts.co.uk/SAP_R3_QUICK_REF.xlsupdatetable+tse05&hl=en&ct=clnk&cd=1&gl=in
    FUNCTION MODULES
    http://www.erpgenie.com/abap/functions.htm
    http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
    http://www.erpgenie.com/abap/index.htm
    http://www.geocities.com/victorav15/sapr3/abapfun.html
    Rewards if useful..........................
    Minal

  • Triggering of Preventive Maintenance based on Measuring Point

    Hi,
    I have set measuring point & defined upper range limit and lower range limit. Now I want to trigger preventive maintenance, based on reading enter against measuring point specifically if measuring point reading is above or below defined upper range limit or lower range limit.
    Letu2019s say example, If 10 and 5 is upper range limit and lower range limit, now in this case creation of notification / main order if user has enter measuring point value more than 10 or less than 5.
    Regards,
    Dipen Shroff

    Hi,
        You can do it via Condition Based Maintenance ..
    IMRC0001- U can use this User exit
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a7/fa4c988f6611d29e8a0000e8323350/frameset.htm
    regards
    pushpa

  • Auto Update of measuring point/document

    Dear all,
    I have one issue over here.Measuring point/document is not updating automatically after productiuon order confirmation . I tried with following steps
    1) Created the equipment as test equipment -->created measuring point as a counter ---> maintain the usage value formula SAPF02 in the PRT tab . Unit of measurement for the characteristics and base unit of measure of material are same
    2) Then i have assigned this eqipment as a PRT in the routing of material .
    Which steps i am missing
    Thanks

    Hi
    I had faced the same problem  when I used SAPF02 then I did following changes.
    Created formula like SAP_09 * PRTSTD / SAP_08
    SAP_09 : Operation Qty
    PRTSTD : PRT Standard Value
    SAP_08:   Base Qty.
    Also make sure the measuring point category should me T in IK02( PRT life counter)
    Regards,
    Raj

  • Maintenance Order through Measuring Point

    Dear all,
    I want to know whether it is possible to create the maintenance order on the basis measuring point .
    I know how to create the order on the basis of measuring counter.
    Is there any procedure to create the maintenance Order through measuring point as done in case of counter?
    kindly provide the solution for Creation of Maintenance Order using Measuring Point..

    Really very thanks for the solution.
    I have one more query, we can create the measuring point using the t.code IK01.As you told we have to create the measuring point with upper and lower range.
    Is that we have to create 2 measuring point for upper as well as lower range or in one measuring point it is possible to accumulate both the upper and lower range.
    If it is possible to accumulate both the upper and lower range in one measuring point then kindly provide the procedure.
    Thanks in advance.

  • Measuring Point Status.

    Dear All Consultants,
    I have scenario for warranty services, so I define master warranty with to conditions “years - kilometer reading”.
    The problem is while assigning master warranty to equipment master system gives me this error {could not determine the status for measuring point 000000000212 at date 11.06.2007      
    Message no. BG212   } 
    Why this message appears and how to solve it.
    It is only warning message but it assume that the warranty expired.
    Waiting your kindly replay.
    yasser.

    Hi,
    Please refer the link below
    http://help.sap.com/saphelp_46c/helpdata/en/5a/3efb377409bd5ae10000009b38f889/frameset.htm
    as you might have not defined first counter.
    Enjoy SAP…
    Don’t forget to give points if its useful ans.
    Namskar
    Ketan Dave

  • Cannot create "Digital" measuring points on Work Manager 6.0

    Hi All,
    I am attempting to create "digital" i.e. Pass/Fail measuring points in Work Manager 6.0. I can enter readings as shown below but when I execute a sync, the error message below is shown:
    I can use the same measuring point in SAP via IK11 as shown below to create a measuring document using valuation code only. However, the Work Manager requires a numeric characteristic to be added and the "no reading" checkbox to be ticked.
    Any help would be greatly appreciated.
    Thanks,
    Jonathan

    Hi Michael,
    I tried setting it up with just the two values (0-fail and 1-Pass) and I'm still running into errors. If you could take a look I'd be grateful.
    Set up code group with two values:
    IK11 allows just the valuation code to be used:
    On the device:
    As far as I can see this should work but it still creates the same error as previously. Ideally it should work as IK11 and allow the user to select from multiple valuation codes but it appears to still require a characteristic.
    One option I tried is to assign a characteristic in addition to the the valuation code and use a 0 reading. This works but is a "workaround" solution in comparison to IK11.
    Any help would be really appreciated.
    Thanks,
    Jonathan

  • Since I can't view my points history...​..

    Can a specialist please let me know how many points I have pending and an estimated date of when I'll be receiving my points since I can't view anymore on bestbuy.com. I want to know if I'll be receiving points for a pre order and a purchase that I made on 9/27. When can we expect to be able to view our history. I figured since a lot of people are asking for this feature it would of been on the top of the to do list for bestbuy. I wouldn't be asking but I had problems in the past with receiving points.
    Solved!
    Go to Solution.

    Good morning Dracky,
    As long as your BestBuy.com and My Best Buy accounts are linked, you should be able to login to BestBuy.com right now and view your points/purchase history.  I posted an update to the forum on 10/1/2014 once the points/purchase history feature had officially been added to BestBuy.com.  You would want to login to BestBuy.com, click on "Account Overview" or "Rewards" under the My Best Buy tab, and then click on either "Points History" or "Purchase History."
    From what I can see, you do have a couple transactions from 9/27/2014 that are currently pending in your account.  If you would like to discuss your account in additional detail, then please feel free to send me a private message and I will see what I can do to help.  You can send a private message by logging into the forum and clicking on the yellow envelope located at the top of the page.
    *UPDATE* - Manage your My Best Buy account on BestBuy.com
    Thank you for posting to the forum!
    Derek|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Screen enhancement in display measuring point (ik07) and ik02

    Hi experts,
    Can anybody please help in determining userexits for screen enhancement of ik02 transaction. I need to add block to measuring point details.
    and also i need selection screen input parameters to display at the bottom of ik07 tcode.i had inserted the selection screen parameters at the top of screen in ik07 but i need it at last. how can it be inserted there.
    PLZ HELP!!
    screen shot of ie02 for referenece....

    Hello Jared,
    Have a look to this :
    http://help.sap.com/saphelp_crm50/helpdata/en/20/a4ffee7e0fcc4ebb7e5466d3903d38/frameset.htm.
    Regards,
    Frédéric

  • How to  make Measuring Point Description Field scrollable on the Detail Read Screen

    In the Measuring Point Read Detail Screen (Rounds Manager), the description field does not have a scroll bar like it does on the Point Read Counter Detail Screen.  This means that the end-user has to arrow-over to the right on the handheld device to see the entire description.  We changed the transaction property to be the same as that on the measuring point field on the Counter screen but that did not resolve the issue.  We are assuming that the field width is defined in columns but are not sure if columns is the same as pixels.  It seems like there is some type of behind the sceens calculation based on the number of pixels used by the characters in the description.  The transaction property does have word wrap activated but it seems to make no difference. Does anyone have any suggestions on what can be done to make the measuring point description have a scrollbar and have the description wrap?  The Rounds Server is version 2.3.
    Tags edited by: Michael Appleby

    1. wall of unformatted code. Use \ tags when posting code.
    2. you're not even asking a question. You're just saying "it doesn't work" and then you dump the code. What do you expect? That people now go to debug it for you?                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Measuring Points are Not displaying in mobile devices(SAP WM 6.1)

    Hi Experts,
    In mobile devices the measuring pints for work order not displaying. When we select the "record point" option for particular work order it should display the measuring points for that WO. But it displaying '0 measuring points'. As shown in screen shot below.
    But in SAP Bach end Measuring Documents are defined for Work Order.
    can any one explain :To display measuring points in mobile devices, need any extra configuration in back end? or
    What functionality need to activate? How to enable this?
    Thanks
    Chigari

    Hi Chigari
    Measuring Points assigned as PRT's in backend application (SAP ECC) should be displayed in Agentry Work Manager 6.1 by standard, if their corresponding technical objects are assigned to either the Work Order header or one of the operations.
    Please check if this requirement is fulfilled in your case.
    There is no need to modify anything in the Configuration Portal (as far as I know).
    The modification we have made is only regarding Measuring Points belonging to other Technical Objects (and still assigned as PRTs).
    Søren Hansen

  • Making system settings for measurement documents and measuring point

    What is the significance of making system settings for measurement documents and measuring point in spro?
    Edited by: Pallavi Kakoti on Jul 14, 2011 1:23 PM

    Hi,
    << Moderator message - Cut and paste response from http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-OLI0IMRCCUST removed. Plagiarism is not allowed in SCN >>
    Regrds
    Jitender
    Edited by: Rob Burbank on Jun 6, 2011 10:53 AM

  • Function Module to get usage by supplying measuring point and equipment no

    Hi,
    I want to know what is the function module to get the usage on giving the measuring point,equipment number and month.Thanks in advance.
    Regards,
    SGR

    Try this Function Module : ALM_ME_EQUIPMENT_GETDETAIL

Maybe you are looking for

  • Installation RDBMS Oracle11g Express Edition fails on Windows 7 64bits.

    Hi, I want to install an Oracle11g Express Edition on a Windows 7 64bits. I have clicked on 'setup.exe' and i have ran this module with the 'Administration Option'. It's works well but when 'setup.exe' ends, the directory C:\oraclexe\app\oracle\orada

  • Support pack not importing

    Dear Team, When I am running Support pack SAPKB70010. The import was stopped, since an error occurred during the phase IMPORT_PROPER, which the Support Package Manager is unable to resolve without your input. After you have corrected the cause of the

  • Microphone input recording source while using Steam/Ventr

    I own the Sound Blaster Audigy 2 Zs. I also use a voice program called Ventrilo while playing CounterStrike/Steam. My problem occurs when I play counterstrike. I go into the surround mixer and choose Line-In 2 as my recording source as that is where

  • How and when the realDelete method gets called for a custom adapter?

    Hi, I am a newbie in sun identity manager and is in the process of writing a custom adapter for documentum resource. While I am successful in creating the resource,then provisioning the resource to an user(i.e creating an account of the user on docum

  • How to generate Outbound Test IDOC ?

    I have the sample IDOC receiver application running and registered with the SAP test system, but now I am trying to find out how to create an IDOC and send it from the SAP system to my test application. (We are using the test system provided by SAP a