Measuring point Not on device

Hi ALL
We are on MI 7.1.
We are facing an issue with Measuring points. During the first sync the Measuring points were downloded to the device.
We created new Measuring points in R/3 and these new ones are available on the Middleware but on the device.
The Funct Locations linked to these Measuring points are available on the device. There are other Measuring points available for these Funct. Locations ( downloded during the first sync) but the new Measuring points are not available on device.
Did someone came across this issue, what can be the reasons behind this?
Regards
Manish bansal

Hi
The query is resolved.
I have to run the program MEREP_REPLICATOR_START for Funct. Location also.
After running the program it worked.
Regards
Manish

Similar Messages

Measuring Points are Not displaying in mobile devices(SAP WM 6.1)

Hi Experts,
In mobile devices the measuring pints for work order not displaying. When we select the "record point" option for particular work order it should display the measuring points for that WO. But it displaying '0 measuring points'. As shown in screen shot below.
But in SAP Bach end Measuring Documents are defined for Work Order.
can any one explain :To display measuring points in mobile devices, need any extra configuration in back end? or
What functionality need to activate? How to enable this?
Thanks
Chigari

Hi Chigari
Measuring Points assigned as PRT's in backend application (SAP ECC) should be displayed in Agentry Work Manager 6.1 by standard, if their corresponding technical objects are assigned to either the Work Order header or one of the operations.
Please check if this requirement is fulfilled in your case.
There is no need to modify anything in the Configuration Portal (as far as I know).
The modification we have made is only regarding Measuring Points belonging to other Technical Objects (and still assigned as PRTs).
Søren Hansen

Measuring point difference

Hi All,
Is it possible to get the difference for a measuring point(not counter) when entering the reading every time.
regards
sunil

Hi Sunil
In Standard SAP its not possible. But whats you basic requirement... why you need difference in measuring point documents....
- Pithan

Measuring Point in Maintenance Plan

How can I link a measuring point (not a counter) to the Maintenance Plan?
Currently, I can only link a counter to a Maintenance Plan but not a measuring point.
The reason why I am asking for this is that I would like to trigger automatic creation of a work order whenever a measurement reading for an equipment goes outside the specified upper and lower limit of a measuring point. I would like to define a condition in the maintenance plan for this based on the measuring point say for example temperature.
I believe activating userexit IMRC0001 is just part of the solution. Is there something else that needs to be done?
Thanks.
Giscard

I have already activated userexit.
Is it correct that the userexit is triggered upon saving a measurement reading (tcode IK11)?
Do you have sample code for the userexit so that a Notification or Work Order will automatically be created when the reading entered is outside the upper and lower limit?
But my questions actually is this - Is possible to link a measurement point (not a counter) to a Maintenance Plan?

Measuring points in maintenance planning

Hi,
Can we use measuring point(not a counter) for preventive maintenance planning. for example - i need to perform the operation when a color of oil is changed from yellow to black. is it possible through measuring point?. it is possible means please share that procedures.
Regards
sathish

Hi Satish,
Yes, it is possible to generate a maintenance notification if the measuring point reading is not as per standards or target value. You require a user exit IMRC0001 to IMRC0005. Also read documentation for these user exits in tcode SMOD.
Regards,
Vaibhav Mishra

Functional Location measuring point UOM not displayed on mobile device

Dear Experts,
I am running SAP Work Manager 6.0 with Agentry Server v6.1.4.179 and SAP ECC 6.0 with SMFND 610_700 SP01 and SMERP 610_700 SP01 and Agentry Client v6.1.3.10200 on an iPhone.
When I display from the iPhone the "Valve Water Flow in m3/h" counter, the UOM is represented as "***"
The "Pump Bearing Oil Level in mm" counter UOM is displayed properly.
The Measuring Points are associated to a FLOC. A work Order with this FLOC has been transmitted to mobile device.
Thanks for your help.
Didier.
Reading Points definition in SAP:
Reading Points on iPhone:
Tags edited by: Michael Appleby

Hi Bill,
Thanks for your reply. In fact , I have the same problem with the WPF client and if I enter a reading value, I will get the following error message during the transmit. "Unit *** is not created in language EN"
WPF client display:
Transmit error:
Agentry log:
readDataObjectMeasuringPoint::begin
BAPI::begin
User::getString::begin
User::getString::Property: transaction.point = 26
User::getString::begin
User::getString::Property: transaction.shortText =
User::getString::begin
User::getString::Property: transaction.reading = 0
User::getString::begin
User::getString::Property: transaction.UOM = ***
User::getString::begin
User::getString::Property: transaction.referenceObjectNumber = OR000004000293
User::getString::begin
User::getString::Property: transaction.prevCodeGroup =
User::getString::begin
User::getString::Property: transaction.prevCatalogType =
User::getString::begin
User::getString::Property: transaction.ValuationCode =
User::getString::begin
User::getString::Property: transaction.isCounter = False
User::getString::begin
User::getString::Property: transaction.codeTextOnly not found, returning empty s
tring
User::getString::Property: transaction.codeTextOnly =
User::getString::begin
User::getString::Property: transaction.description = Pump Bearing Temperature
User::getString::begin
User::getString::Property: transaction.skipReading = False
User::getString::begin
User::getString::Property: transaction.status not found, returning empty string
User::getString::Property: transaction.status =
User::getString::begin
User::getString::Property: transaction.IsNotRead = False
User::getString::begin
User::getString::Property: transaction.tmpReading not found, returning empty str
ing
User::getString::Property: transaction.tmpReading =
User::getString::begin
User::getString::Property: transaction.CodeGroup not found, returning empty stri
ng
User::getString::Property: transaction.CodeGroup =
User::getString::begin
User::getString::Property: transaction.code not found, returning empty string
User::getString::Property: transaction.code =
readDataObjectMeasuringPoint::SkipReading=False
User::getString::begin
User::getString::Property: transaction.point = 26
User::getString::begin
User::getString::Property: transaction.shortText =
User::getString::begin
User::getString::Property: transaction.reading = 0
User::getString::begin
User::getString::Property: transaction.UOM = ***
User::getString::begin
User::getString::Property: transaction.referenceObjectNumber = OR000004000293
User::getString::begin
User::getString::Property: transaction.prevCodeGroup =
User::getString::begin
User::getString::Property: transaction.prevCatalogType =
User::getString::begin
User::getString::Property: transaction.ValuationCode =
User::getString::begin
User::getString::Property: transaction.isCounter = False
User::getString::begin
User::getString::Property: transaction.codeTextOnly not found, returning empty s
tring
User::getString::Property: transaction.codeTextOnly =
User::getString::begin
User::getString::Property: transaction.description = Pump Bearing Temperature
User::getString::begin
User::getString::Property: transaction.skipReading = False
User::getString::begin
User::getString::Property: transaction.status not found, returning empty string
User::getString::Property: transaction.status =
User::getString::begin
User::getString::Property: transaction.IsNotRead = False
User::getString::begin
User::getString::Property: transaction.tmpReading not found, returning empty str
ing
User::getString::Property: transaction.tmpReading =
User::getString::begin
User::getString::Property: transaction.CodeGroup not found, returning empty stri
ng
User::getString::Property: transaction.CodeGroup =
User::getString::begin
User::getString::Property: transaction.code not found, returning empty string
User::getString::Property: transaction.code =
create::/SMERP/PM_DOMEASUREMENTDOC_CRT Connection ID: com.sap.mw.jco.JCO$Client@
42499d6d
create::Function /SMERP/PM_DOMEASUREMENTDOC_CRT created
setImportParameters::TIMESTAMP_FROM_MOBILE=20140701214858
setImportParameters::COMMIT_WAIT=X
setImportParameters::MOBILE_USER=MJONES
setImportParameters::USER_GUID=005056913EE61EE3B5A27E3E2BC46F0D
setImportParameters::MIDDLEWARE_CALL=X
setParameters::begin
setParameters::POINT=26
setParameters::IDATE=20140701
setParameters::ITIME=172024
setParameters::MDTXT=
setParameters::READR=MJONES
setParameters::RECDV=0
setParameters::RECDU=***
setParameters::RECDVI=X
setParameters::CODGR=
setParameters::VLCOD=
setParameters::CODCT=
setParameters::IV_WORK_ORDER_OBJECTNR=OR000004000293
execute::::MJONES::before BAPI execute: /SMERP/PM_DOMEASUREMENTDOC_CRT
User::rethrowException::begin
User::rethrowException::Exception caught: Unit *** is not created in language EN

Measurement points list not downloaded in MAM 2.5

Hi,
We have recently upgraded our MI server from SP13 to SP14, in which we use MAM 2.5 SR2. After that, we re-generated all SyncBOs and started replication for the timed-2 way ones. We also re-installed the PDA applications
All seemed to work fine, but now the measurement list points are not being downloaded to the PDAs anymore.
If we run the function MAM25_041_GETLIST on the backend, the measurement points are returned correctly. Also, when we run transaction MEREP_EX_REPLIC for the SyncBO MAM25_041, it runs with no error and returns many records (more than 50000) with action ADD and around 150 with action MODIFY.
Does anybody know what the problem might be?
Thanks,
Daniel

Hi Joy,
you can refer the Table 2 .
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix.pdf
Yes, Device pack needs to be installed in all servers which also requires reboot of servers.
Further, u need to take snapshot of existing firmwares from Device---Device Settings --device defaults to avoid changing of firmwares for other models.
regds,
aman

TS1286 At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

I think my problem is fixed now.
For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

Measuring point does not exist

Hi,
I am facing problem in pi sheet where in co54 while sending the process msg i am getting the error
"Measuring point does not exist"
"Destination YI16 COCI_MEASUREMENT_DOC_CREATE cannot process the message"
"Message is not sent to any destination"
Can any body help....
Rajsekhar

Hello
Check the link below for the info you can gather using the Container Variables.
Creating Alert Categories
http://help.sap.com/saphelp_nw70/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
Regards
Mark

Measuring point/document is not updating

Dear all,
I am new in PM. I have one issue over here.Measuring point/document is not updating automatically after production order confirmation via co11n . I tried with following steps
1) Created the equipment as (P)Production resources/tools -->created measuring point as a counter ---> maintain the usage value formula SAPF02 in the PRT tab . Unit of measurement for the characteristics and base unit of measure of material are same
2) Then i have assigned this equipment as a PRT in the routing of material .
3) Production order confirmation via co11n Each unit
Which steps i am missing. if u give me steps by steps procedure to me for counter based maintenance, its helpful for me.
STILL not answered and no reply.
I am waiting for reply.
Thanks
tarun
Edited by: tarun on Oct 5, 2010 5:06 PM

Hello,
Have look this thread [Re: Auto Update of measuring point/document;
Regards,
Rakesh

Measuring Point during IK01 not allowing characteristics with CHAR type

Hi Experts,
Measuring Point during IK01 not allowing characteristics with CHAR type Only allows NUM,
could you anyone suggest on this.
Regards
Nitin

May i know the reason of such implementation?
You can use group code and valuation code for assigning predefined values to measuring documents.
Moreover text field can be used for assigning short text to it.

IE02 not able to display class overview & measuring point/counter tab,

Hi Dear,
I am not able to display class overview & Measuring point/counter tab in T-code IE02.
But it is display in IE01 & IE03.
Kindly suggest

Mayursinh Dayatar,
Its probably an authorisation issue.
Are there any error messages??
PeteA

How to make Measuring Point Description Field scrollable on the Detail Read Screen

In the Measuring Point Read Detail Screen (Rounds Manager), the description field does not have a scroll bar like it does on the Point Read Counter Detail Screen. This means that the end-user has to arrow-over to the right on the handheld device to see the entire description. We changed the transaction property to be the same as that on the measuring point field on the Counter screen but that did not resolve the issue. We are assuming that the field width is defined in columns but are not sure if columns is the same as pixels. It seems like there is some type of behind the sceens calculation based on the number of pixels used by the characters in the description. The transaction property does have word wrap activated but it seems to make no difference. Does anyone have any suggestions on what can be done to make the measuring point description have a scrollbar and have the description wrap? The Rounds Server is version 2.3.
Tags edited by: Michael Appleby

1. wall of unformatted code. Use \ tags when posting code.
2. you're not even asking a question. You're just saying "it doesn't work" and then you dump the code. What do you expect? That people now go to debug it for you?

Unable to Inport Measurement points and Measure documents from R/3 to clien

Hi,
I am not able to import measuring points and measuring documents into the client device even after assigning the measurement point varaint in the back-end config.
Please help!
Thanks & Regards,
Kanwar

Hello Kanwar,
I am thinking of two reasons at the moment.
1. The equipments/Functional location which you had downloaded to your device were not having measurement points. If this is the case, you need to make sure that corresponding Equip/FL's are there on client (provided case 2 is not valid)
2. The measurement points were not replicated. Hope you had checked MEREP_207 table for the required measurement points.
Hope this helps.
Best Regards,
Subhakanth

Measurement Point Synchronisation

I am not getting Measurement Points on the Mobile Device.
I have read several of the threads related to the replication of Measurement Points but have been unable to find the answer to my problem:
I have run the Function MAM30_041 in the backend R/3 where it selects 157 Measurement Points.
I have created a Variant in SPRO ALM_ME_GENERAL for the Measurement Points and executed RALM_ME_MEASP_FULL_DOWNLOAD_SD.
On checking table MEREP_207 in the MI there are 35 records. However, after synchronising the mobile device, I am not getting any measurement points for the technical objects to which they are assigned.
The technical object are available on the mobile device but no measurement points.
The configuration for the Scenario assigned to the user has the following settings:
Defects Recording: Defects Recording Active
Notification Type: Z1 (our own)
Meas. Recording: Measurement Recording Activated
Help please!
John Woodland

Hi John,
from your description you have two problems:
1. Not all measurement points that are configured for replication are being replicated
2. Equipment which is expected to have measurement points downloaded to the device does not have them.
Problem 1 - meas. point is configured for replication but does not come to MEREP_207 table..
The best way to understand how many meas.points are configure for replication are:
1. Put a breakpoint in RALM_ME_MEASP_FULL_DOWNLOAD_SD before the RFC call to the middleware system and check how many meas.point keys are going to be transferred.
2. Right after executing RALM_ME_MEASP_FULL_DOWNLOAD_SD check how many keys are transferred in MEREP_DELTABO.
If you see that more keys are transferred in MEREP_DELTABO that eventually make it way to MEREP_207 - that is real problem that have to be investigated and fixed. That is what I would do to investigate the reason:
1. transaction se22 to see if there any errors
2. figure out which meas. points were not replicated in MEREP_207 and execute BAPI MAMXX_041_getdetail on the backend for these meas.points. Fails/error of this BAPI is the reason why meas.point was not replicated.
Problem 2 - equipment is downloaded to the device without meas.points it references.
There can be 2 reasons why it is being downloaded without meas.points:
1. meas. point that this equipment references is not replicated in MEREP_207 because of the problem that was discussed before. Once you fixed the issue and all 137 meas.points are replicated, the problem with equipment will be solved as well.
2. equipment is referencing meas.point that is not configured for replication (variant for meas.points that you configured in MAM excluded this meas. point). To figure this out: execute MAMXX_031_getdetail for the equipment in question, check that all meas. points in table "Equipment meas. points" are within meas.point variant. If not - fix the variant and fix problem 1 to ensure that all meas.points are replicated.
Regards,
Larissa Limarova

Measuring point Not on device

Similar Messages

Maybe you are looking for