Measuring Point Object??

Hi All
Could anyone tell me where to maintain "Measuring Point Object" (TCode -"IK01") in SPRO?
Regards.

hi this is
System table, maint. only by SAP, change = modification
pl check with your technical team
-ashok

Similar Messages

Reg: measuring point creation and measuring point counter creation

how to create measuring point and measuring point counter.
what is the difference between these two.
what is measuring point category,
what is measuring point
what is measuring point object
what is measuring position.
can anyone explain me in an easy for better understanding.

Firstly a Measuring point is nothing but, a factor which you measure on an equipment/FL. (Temperature, Vibration etc)
Then, a measuring point is created either on a Functional location or on an Equipment.
IK01 is the T-code for creating it.
If it is for F/L you have to use IFL as measuring point object, when it is an equipment you use IEQ
Generally these two will be in use.
In the IK01 screen if you tick the counter checkbox, the MP becomes a counter.
Example for simple MP is temperature.
And example for a Counter MP is 'Litres of petrol consumed'
In the first case you don't need to add the temperature measurements, whereas in the petrol consumption you may wish to have the cumulative value of readings taken for a period of time.
The measuring position: Example : If you are measuring the temperature of a Motor on the Drive side, you may put 'Drive End' in this field, or similar many applications.
Category would group these MPs.
In case of need you may define in customisation a sep[arate MP category.
Then each time you read a MP through IK11 or other methods a Measuring Document is created.
Regards
Jogeswara Rao

Order's measurement points

Hi Experts,
I need to read measurement points asssigned to an order( it's functional location).
We tried RFC MEASUREM_DOCUM_READ_TO_ORDER but it returns measurement documents
(readings).
In Our requirenment, the order is newly created and no measurement documents exists.
we need to give all the measurement points (only) that exists against the order( it's functional location)..
Could you please help in this.
Please suggest any table/RFC.
Rohit

Hi Rohit,
The relevant table are:
IMPTT - for mesuring points
EQUI - for equipments
IFLO - for functional location
Using the Object Number for the Measuring Point Object in table IMPTT, you can link the object to technical objects (object no. from respective tables - EQUI and IFLO).
I hope it resolves your issue.
Regards
Amit

Measuring Points extraction

Hi all,
Im trying to use the PM_MEASUREMENT DataSource. It works pretty well with Measuring Points linked to Functional location. However, I have some Measuring Points that are linked to Equipments and those Equipments have no connection to Functional Location. For these Measuring Points no data is being extracted at all.
Is there any restriction with the DataSource PM_MEASUREMENT that makes it only to extract data for Measuring Points linked to Functional Location?
If not, does any of you have any idea about what is going on here?
Thank you very much,
Claudiomar

Thanks for your replies.
Saurabh: High volumes of serialized products are produced that are serviceable under warranty.
We are creating Serial Numbers for each model of the Product. We can attach Master Warranty and capture Warranty period for each Serial Number. But for creating Measuring Point / Counters, I have to generate an "Equipment Number" (via the Equipment View) for each Serial Number. If it is possible to do the same without creating Eqpt Num it will help.
Pete: I checked that link you had shown. But in T Code IQ01, I find Serial Number is not figuring in the list "Measuring Point Object (Obj.Categ. in Gen.Status Management)" and there is no IMG set up for this.
Request clarifications pls.
Thanks.
Raj

How to control the authority of measuring point when creating

hi,expert
I want to control the authority of the measuring point when creating the measuring point in Ik01.That is I can check the authority object of the measuring point object (equipment of function location) when I create .The sandard system can only provide the authority check of T-CODE and AuthorizGroup. On the other hand there is no customer-exit to do this .Please give me a solution .
Thank you
Edited by: Fengxi Zhao on Dec 17, 2008 8:35 AM

Dear Sir
Can you clearify the requirement in detailed? What exactly you want to prevent & You want to authorise for ??
Regards

Measuring Points are Not displaying in mobile devices(SAP WM 6.1)

Hi Experts,
In mobile devices the measuring pints for work order not displaying. When we select the "record point" option for particular work order it should display the measuring points for that WO. But it displaying '0 measuring points'. As shown in screen shot below.
But in SAP Bach end Measuring Documents are defined for Work Order.
can any one explain :To display measuring points in mobile devices, need any extra configuration in back end? or
What functionality need to activate? How to enable this?
Thanks
Chigari

Hi Chigari
Measuring Points assigned as PRT's in backend application (SAP ECC) should be displayed in Agentry Work Manager 6.1 by standard, if their corresponding technical objects are assigned to either the Work Order header or one of the operations.
Please check if this requirement is fulfilled in your case.
There is no need to modify anything in the Configuration Portal (as far as I know).
The modification we have made is only regarding Measuring Points belonging to other Technical Objects (and still assigned as PRTs).
Søren Hansen

Measuring Point History

Hi! Experts
We are working with MAM25 SR5 and we have the following quastion regarding measure point history:
Currently we can see only one history document on the PDA. It is the last one that was registered on the system. But my users want to see at least the last 3 ones if they already exist on the backend system. Is it possible ?? how can we show it ??
Backend:
The perform general setting
Measuring Points:
Variant: XXXXXXX
Vianta: YYYYYY
We did active the ckeck box Last Meas. Document in order to get it on the history parton the PDA.
My questions are:
1. Should I take that check box out in order to get more than one historic information ???
2. Where should I control how many historic documents I want to see on the PDA ??
Thank you very much
Xiomara Aramendiz

Hi Xiomara,
have a look into SPRO - there you should see the question if you want the history or not. And related to that you can enter how many you like to see.
If that is not the case in your system, then simply enhance the GETDETAIL handler for this object to return more then the last history.
Hope this helps.
Regards,
Oliver

Measuring Point & Counter

Hi PM Gurus,
Can you tell me about the performance based maitenance :
1. Measuring Point (M.P.)
2.Counter
What are the characterstic units come under the Measuring Point.is it right that only we can give upper and lower limit in M.P not in counters.Also User exit is only created for MP not for counter.
What are the basic difference between Measuring Point & Counter.
In both the cases is it necessary to select counter tick mark or only in case of counter ?Is there is any difference while generating the plan
Regards,
RC

Hi Raju,
You can do this through,
IMG - Maintenance Plan,work center, task list & PRTS - Maintenance Plan - Set maintenance plan catagories.
Here in call object column you can define which type of call object you want for your maintenance order based on this you will get the order or notification as a call object.
And rest of the things measuring point & counter that already defined in this thread.
Regards,
Rip

Measuring point,counter & meas document

What is the concept of Measuring point,counter & meas document in regard to PM ?

Hi,
Measuring Points are measurement of physical condition like temprature pressure, and consumption like fuel, and reading like hour meter , speedometer etc.
measuring points just like as log book of equipment
it is created by ik01, against technical object with characterstics of which we want to take measurment reading
and when actual reading are recorded against measuring point , a document is genrated called measurment document
it is crated by ik11, ik14 , ik34 against measuring point
regards
Jitender Suhag

Measuring Point / Counter button

Hi,
How to hide / display Measuring point & Counters button in Header data of Reference Functional Location(IL11).(Organisation data).
Thanks & Regards,
Santhosh

Dear Santhosh,
Try with Screen variant(SHD0). Else, you can achieve this by implementing a proper BAdi/Enhancement, if there is one.
If not, you can achieve this by modification, but, it is not recommended by SAP.
Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
REPORT ZTEST.
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Alternatively, you can do the following:
1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
ull get a list of Enhancements related to that Componene....
5. Choose which ever enhancement will suit ur business need ..
6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
For a user exit......
Finding whether there is any User Exit or not for tcode VA42
1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
Reward points if this is helpful.
Regards,
Naveen.

Upper Limit - Lower Limit in Measuring Points

Dear PM Experts,
In my company we have an Equipment where the temperature of it has to be maintained in a certain range. if the temperature falls out side the range the maintenance team has to attend. In SAP I registered this point as a measuring point. And I'm aware of the fact that we can maintain Upper and Lower Limits of reading for a measuring point in SAP.
But I want SAP to automatically create a PM Notification/Order once the user enters a value out side the above specified range. I know that this is possible with conters when the reading reaches a certain value. But couldn't figure out a method for the latter.
Please provide me a solution.
Rgds
Deepal

Hello Deepal;
You will have to activate exit: IMRC0003.
Then you'll have to create a maintenance plan, maintaining the equipment & the measuring point. Based on the call object: order/ notification- system will automatically trigger the object when the actual reading falls outside the specified range.
Hope this helps.
Regards
Hemant

Equipment Efficiency through Measuring Point and Counters

Hi gurus,
I am planning to get the efficiency of equipment by using Meauring points and counters.
Against an Equipment I have created a Measuring point as counter.
I am capturing Actual output of the machine as mesurment reading.
In order to set the Target output i dont find a solution.
I am expecting from all you guys to give me some solution to set the Expected or standard output against an equipment.
so that i can compare the target vs actual as well as efficiency.

The purpose of measuring points and counters is to genrate call objects at given overflow reading or points I dont think so that they can help in calculating the effiency in a way that this machine perfomence is let say 80% and other one is 70%.
However you can maintain it manualy while entering the measuring points in format of % .
Regards
Iftikhar

Measuring points

Please tell me the procedure to fill the measuring point/counter during the fleet object creation.i ma not able to create measurement document section.help me out of this

hi
whats the problem you are facing ,you have to enter the measuring reading using T code IFCU
regards
thyagarajan

PCUI Installed base -- measuring point exception

Hi,
Application: COMM_IBASE ( installed base)
Path:
Search for installed base > Select one Installed base> In the tree select one of the attached individual object
Now Measuring points tab displays.
Select Measuring point tab -
> In the drop down select Measuring point - Ind. Object
Gives error message
500 SAP Internal Server Error
Error message: Basic Customizing in table COMC_IL_UI for structure CRMT_BSP_IL_IOBMP_S_FCAT is missing ( type of termination: ABORT_MESSAGE_STATE )
Please help me to resolve the same.
Thanks and Regards,
Abdul Raheem .S

Hi Tiest,
Even I expected the dump.But unforunately there is no dump.
Vijay,
I already raised oss message,but most of the times we get quick response in forum.that's what this try.
Thanks,
Abdul Raheem .S

Question about Measuring Point / Couter

Dear PM Guru,
While creating my Maintenance Plan with tcode -IP42 , there's counter automatically appear in the plan.
I under this counter is from measuring point.
I am confuse with the Counter in all this tcode IP41 , IP42 & IP01.
My question are :
Is this measuring point / counter master data or technical object ?
Where's the relationship for counter in Maintenance plan ?
Any impact the counter with the cycles used in the item line?
What 's the different between IP01 vs IP41 vs IP42?
Appreciate your input from any PM Guru.
TQ

Hi Venu,
Thank for your reply.
Understand that In Performance-based Maintenance Plan, SAP automatically links Counter to the Maintenance Plan.
After my personal investigation , fully understand that only performance based maintenance plan are using counter. Normal Maintenance Order will not use counter as Master data.
Example Performance Based Plans :
When the measuring point counter reaches 3000 -1st order should get generated
2nd one at 6000, 3 rd one at 9000 etc...
Or
1. Single Cycle with counter -- Ex . Maintenance every 3000 hrs
2. Strategy Cycle plans.. -- Ex. Maintenance every 3000 hrs and every 6000hrs
3. Multiple Counter Plans..-- Ex Maintenance every 2month or 1year..
Process Flow.
Create equipment with suitable measuring point (inc annual estimate) with Tcode IK01 create measuring point
Create initial counter reading measurement document
Create task list (optional for single-cycle plan)
Create counter based maintenance plan
Scheduling maintenance plan (IP10/IP30)
Create measurement documents periodically
Little Question to ask.
1) Is this the SAP standard flow ?
Please correct me if i am wrong.
Thank you.

Measuring Point Object??

Similar Messages

Maybe you are looking for