Measuring Points transfer to one total measuring point

Hi everyone,
We would like to transfer the values of different measuring points to one global (total) measuring points. I know that it is possible to transfer one value to n measuring points but I need the opposite.
We habe a machine with different blades (exchangebale) and would like to summarize how many time the machine cut sheets in total.
Is there a way to do this automatically?
Thank you for your answers.
Regards,
Olivier

Hello,
Similar request in this thread:
Issue in Transfer Counter Reading
You would need custom functionality to read the various source counters then transfer the total to the main counter.
-Paul

Similar Messages

Measurement reading transfer

Dear PM Experts,
can any one help me regard Measurement reading transfer. In which scenario we use this one , how its impacts on measuring point / counter and measuring document? please suggest me. i am toomuch confusing regard this one.

Hi,
Measurement reading transfer occurs when a reading at a particular measurement point also updates another or multiple other measurement points. So the reading that is used to update counter A also updates counter B (and maybe C,D,E....).
This typically occurs in an equipment structure where a reading at one level will also update the counters linked to the sub-equipments. If counter A is linked to a airplane - any flying hours recorded to counter A should also be recorded on both engines (counters B and C).
Some further details and examples in SAP Help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/9b/446863454711d189430000e829fbbd/frameset.htm
-Paul

Can source and gate used to measure 2 signals using one counter?

I have one PCI 6602 card to measure measure the frequency. PCI 6602 has 10 channels, in which channel 5 and 10 doesn't have 'source' terminal.
We have to measure frequency from 16 signals using one PCI 6602.
From channel 1 to 4 and 6 to 9, we have 8 'Gate' and 8 'Source' terminals.
We have connected 16 signals to these 16 terminals.
At any given point of the time we want to measure either 'Gate' signals(8) or 'Source' signals(8).
Can any provide any guidance to make a program in labview to measure frequency (period) as per above given points?
Regards
Vijay

Hello Vijay,
It takes one counter for each digital frequency you want to measure and the PCI-6602 has 8 counters total. This means that the maximum number of digital frequencies you can measure is 8. If you want to measure 16 frequencies you'll need 16 counters.
Single counter frequency measurements are made by comparing the board's time base (80 MHz) to an external frequency. The board counts the number of time base periods that occur during one period of your incoming frequency. When you configure the board to take a single counter frequency measurement the card routes the time base to the source of the counter and then you connect the frequency you want to measure to the gate of the counter.
Here are a couple of articles that explain how these measurements are taken and calculated. (The second article is on period measurements so for frequency measurements you measure period and take the inverse):
Making Accurate Frequency Measurements
Period Measurements with a Counter
There are example programs available in the LabVIEW example finder. You can locate these by going to Help>> Find Examples... The examples you want is: Hardware Input and Output>> DAQmx>> Counter Measurements>> Digital Frequency>> Measure Digital Frequency- Low Freq 1 Ctr.vi.
I hope this explains how counters work and why you need one counter per measurement.
Cheers,
Brooks

Can you connect more then one external screen to a mac with one mini display point?

Does any one know if you can connect more then one external screen to a mac, with one mini display point?

This company has a dual monitor solution for DisplayPort;
http://www.matrox.com/graphics/en/products/gxm/dh2go/

I would like to simulate a bright light point moving over one line...

I would like to know, how can I produce the animation moving one bright light point ( like a moving star ) from one point to another
point, I have already the stage for that, what I would like to know is what would be the recommended RGB, blur effect to
simulate that. I found some RGB color combination, but I would like to know if could be better than that :
RGB for Platinum color : ( 229, 228, 226 )
Gustavo Hevia

Hi , Welcome to the HP Forums!
It is a terrific place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide.Learn How to Post and More I grasp you would like to replace the keyboard and would like the part number and where to purchase one. Here is a link to the HP Pavilion 17 Notebook PC HP Pavilion 15 Notebook PC Maintenance and Service Guide . Please note chapter 3, page 20, item 2 for the replacement keyboard part numbers. You stated you were having a difficulty locating where to purchase the part. Here is a link to HP Notebook PCs - Ordering HP Certified Replacement Parts for your convenience. You can also try a Google search with the part number for other vendors that may have one. To say thanks for replying please click the thumbs up icon below. If this has addressed your query please choose solution provided to help other people locate this information. Best of Luck!

How to get a count of total data points entered?

What Oracle tables are involved in getting the total number of data points actually entered in a particular DCM or panel.
I want to create a sql statement to show: Study, Panel, Total actual data points entered?

This is what I have so far...
SELECT CS.STUDY,
DC.NAME,
COUNT(RP.RESPONSE_ID) "TOTAL DATA POINTS"
FROM RESPONSES RP
INNER JOIN CLINICAL_STUDIES CS ON ( RP.CLINICAL_STUDY_ID = CS.CLINICAL_STUDY_ID)
INNER JOIN RECEIVED_DCMS RD ON ( RP.RECEIVED_DCM_ID = RD.RECEIVED_DCM_ID
AND RP.CLINICAL_STUDY_ID = RD.CLINICAL_STUDY_ID
AND RD.RECEIVED_DCM_STATUS_CODE <> 'REMOVED')
INNER JOIN DCMS DC ON ( RD.DCM_ID = DC.DCM_ID
AND RD.DCM_SUBSET_SN = DC.DCM_SUBSET_SN
AND RD.DCM_LAYOUT_SN = DC.DCM_LAYOUT_SN
AND RD.CLINICAL_STUDY_ID = DC.CLINICAL_STUDY_ID)
INNER JOIN DCM_QUESTIONS DQ ON ( RP.DCM_QUESTION_ID = DQ.DCM_QUESTION_ID
AND RD.DCM_ID = DQ.DCM_ID
AND RD.DCM_SUBSET_SN = DQ.DCM_QUE_DCM_SUBSET_SN
AND RD.DCM_LAYOUT_SN = DQ.DCM_QUE_DCM_LAYOUT_SN
AND RD.CLINICAL_STUDY_ID = DQ.CLINICAL_STUDY_ID
AND DQ.ENTERABLE_FLAG = 'Y')
WHERE (RP.VALUE_TEXT IS NOT NULL OR RP.EXCEPTION_VALUE_TEXT IS NOT NULL)
GROUP BY CS.STUDY,
DC.NAME
ORDER BY CS.STUDY,
DC.NAME ;

Forum Points -- Total Contibution Points can u please clarify ?

Hi friends ,
                  I heard as if we get 250 points we will get a T - Shirt . This 250 points is Total Contribution Points or Forum Points ?
         Because both is variying. Total contribution points includes points for assigning points. But, forum points is for answring , am i right ?
     <b>   If we get Total contribution points can we claim T-Shirt ? ( or ) Forum Points?</b>
Best Regards.,
Shyam

Hi
/people/mark.finnern/blog/2004/08/03/announcing-the-contributor-recognition-program
/people/sap.user72/blog/2005/11/09/sdn-t-shirts-more
https://www.sdn.sap.com/irj/sdn/crphelp
Thanks

How would one skip from point to point that the video is changing while editing.

How would one skip from point to point that the video is changing while editing, like if a certain set of pixels changed to white, and then mark it.?
Basically, I have a set camera, and when certain objects change color I want to mark it. Think of a baseball flying through the air off a pitchers hand, and be able to skip to each point the pitcher is in that position.

The only method of this level of content analysis I'm aware of is with your eyes.
You'll just have to wacth the video to find those parts.

Configuration for FMTB transfer commitment/actual totals to FI

We use transaction FMTB to transfer commitment totals to FI. Based on specified value types, such as purchase orders or funds reservations, the transaction will reallocate between unallocated fund balance and reserve for encumbrances.
In ECC 6.0, the functionality of this transaction has been expanded. In addition to the above transfer, it can also be used to transfer commitment/actual totals to the Budgetary Ledger. The Budgetary Ledger requires that the Budget Control System is activated. We do not use this functionality. We only wish to continue with the original functionality described in the first paragraph.
The program underlying transaction FMTB has changed, from RFFMTOBL in 4.7, to RFFMTTTOBL in 6.0. The configuration for the transaction has also changed drastically. We have tried everything which makes sense to us, but transaction FMTB is unable to find relevant data in the system. The message is "No suitable records found." We have looked at the contents of table FMIOI and verified that the data does exist in the table for the correct accounting period.
Are any of you familiar with this transaction in ECC 6.0? If so, can you please give me some guidance as to how to configure this transaction? Please be as specific as possible.
Thank you. I will award points for helpful answers.

Hello Somar and Imran,
Thank you both for your suggestions. I have examined each of them and they do not appear to be related to the problem.
We have a programmer looking at the transaction in debug mode. We do not have a solution yet, but we have found something which may be causing the problem. The program appears to be trying to join two similar but unrelated fields in different tables.
It appears to be trying to join value type FM_WRTTP in table FMIOI (Commitment Documents Funds Management) to BCS value type BUKU_VALTYPE in table FMBL (Funds management budget document lines). Since the values in these two fields will always be different, the join will always return no values.
We have not yet figured out why this is happening.
Aoife

How can i transfer the one that i check in a alv in the table

hi i just want to ask how can i transfer the one that i check in a alv in the table.
here is the scenario.
ive created a alv with a checkbox, and if i click on some of the checkbox in the alv.
then i need it to display in a table as x.

sel TYPE char1.
wa_fieldcat-checkbox   = 'X'.
wa_layout-box_fieldname     = 'SEL'.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
      IMPORTING
        e_grid = ref_grid.
IF NOT ref_grid IS INITIAL.
    CALL METHOD ref_grid->check_changed_data.
ENDIF.
Here u get data changed into an internal table u created with SEL as a field and SEL filled with X if line selected.
U can modify the table u want from this internal table.
Awrd Points if Useful
Bhupal

Mapping measures in a cube vs Calculated Measure

I have a fact table as
Fact_Table_
Sales Product_ID Special_Product_Flag
Special_Product_Flag is a y/n flag
and a Dimension_ table as
Product_ID Product_Name
I want to have 2 measures in the cube
1. Product_Sales
In the cube I specify the mapping for this measure as Fact_Table.Sales
2. Special_Product_Sales
in the cube I specify an olap expression in the mapping as
     case
     when Fact_Table.Special_Product_Flag = 'Y' then Fact_Table.Sales else 0 end
Now is the measure      Special_Product_Sales treated as a calculated measure ?

Here are definitions of base versus calculated measures.
<li> A base measure is a measure that has associated physical storage in the AW. This physical storage is populated using some kind of load step, which may use either SQL or OLAP DML. The measure may then be aggregated according to the aggregation rules of the cube. The value of a base measure for any given cell in the cube may be stored or may be calculated dynamically depending on the "precomputation" rules of the cube.
<li> A calculated measure is one that has no physical storage in the AW. The values of a calculated measure are always calculated dynamically regardless of the precomputation rules of the cube.
Your case is clearly a base measure because you are physically loading data into the AW. The fact that you use a case expression in the mapping does not change the fact that is takes up physical storage nor the fact that it can be aggregated. It is the ability to aggregate the data that makes this a useful feature. In your case you will be able to aggregate special_product_sales up the product hierarchy so that its value for 'ALL_PRODUCTS' will be
select sum(sales)
from fact_table
where Special_Product_Flag = 'Y'The value of sales for 'ALL_PRODUCTS', by contrast, would be
select sum(sales)
from fact_tableAs a side note it may be better to define your mapping using NULL instead of 0.
case
when Fact_Table.Special_Product_Flag = 'Y'
then Fact_Table.Sales
else null
end

Have tried several times to do all that was suggested BUT itunes still not downloading correctly....still recieving---iTunes.exe - entry point not found - the procedure entry point. AVCFPlayerSppliesMediaSe;ectopmCriteriaAutomaticallKey could not be locat

HELP!! I'm trying to reinstall my iTunes BUT keep getting this---iTunes.exe-entry point not found-the procedure entry point AVCPlayerSuppliesMediaSe;ectopmCriteriaAutomaticallKey Could not be located in the dynamic link library AVFFoundationCF.dll.
itunes was not installed correctly. error 7 (windows error 127) --
I have already tried (4 times) completely unstalling and reinstalling as was suggested But didn't fix the problem.
HELP---CAN ANYONE SUGGEST SOMETHING ELSE TO TRY??

HELP!! I'm trying to reinstall my iTunes BUT keep getting this---iTunes.exe-entry point not found-the procedure entry point AVCPlayerSuppliesMediaSe;ectopmCriteriaAutomaticallKey Could not be located in the dynamic link library AVFFoundationCF.dll.
That one can be produced if you have an older version of Apple Application Support on the PC than is required by iTunes version 11.1.4.62. (The required version of Apple Application Support is included in the standard iTunes installers, but for some reason it hasn't been updating properly for some folks.)
Let's try updating your Apple Application Support to version 3.0 by doing a standalone Apple Application Support install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, can you launch iTunes without the error now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

AppleSyncNotifier.exe - Entry Point Not Found: The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll

Ever since I recently upgrading Itunes, I cannot access the Itunes store, my phone will not sync to my laptop, and this pops up everytime I restart my computer: "AppleSyncNotifier.exe - Entry Point Not Found: The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" I have tried several things without success. Can someone PLEASE tell me what else I can try. Thanks!

Hi Janice - glad to hear you got one of your problems sorted
I understand that your phone doesn't sync automatically when you connect it to your PC with iTunes running. First question is do you see that your phone is connected in iTunes when you plug it in? It should show on the left side of the page about halfway. Usually if you haven't already started iTunes, when you connect your phone to the PC it will open autoamtically and you will see the phone is connected.
If it doesn't show as connected then I refer you to this page
I can tell you that my phone doesn't sync automatically because I didn't want it to, I've purposefully set it on iTunes to sync manually. I do it by left clicking on where my phone shows there and in the page that comes up I click Sync. If you want it to operate automatically then you need to set it to do so. You have that option by clicking on EDIT at the top left of itunes - then PREFERENCES - DEVICES and uncheck 'prevent devices from syncing automatically'. There may also be something to click on the phone page to sync automatically.
For the 'conflict' issue I refer you to this discussion where others have already offered advice.
Good luck with it Janice, and again, let me know how you get on.

Vendor Open items transfer from one Recon to Another recon

We have wrongly maintained one recon account in Vendor.
Is there any way to trnasfer Vendor Open items transfer from one Recon to Another reconciliation account..

Hi,
The best way is to transfer the items from old to new reconciliation account.
Please use the following entries to transfer.
1. Dr Vendor a/c(Old recon a/c)
Cr Vendor clearing a/c
After nullifying the balance in old recon account, here chage recon in the master.
2. Dr Vendor clearing a/c
Cr Vendor a/c(New recon a/c)
F101 only post the adjustment entry at period end and reverse the same entry in next period. So, transferring the items is the best method. If you have volume of data, then create a LSMW for this.
Rgds
Murali. N

How can I transfer JUST ONE IWeb site to another computer?

I am new to making IWeb sites and am now making them for
other people. I have about 10 sites in my IWeb folder and need to
be able to give a person's site to them.
I need to be able to transfer JUST ONE site to another computer.
Right now, I am only able to transfer ALL the sites I have made to
another mac and then, it wipes out all their sites! How can I prevent
the ultimate wipe out of all their iweb sites yet give them JUST ONE
of mine?
thank you in advance,
Beth http://www.yourzensite.com

First, read Wyodor's post about changing the publishing settings HERE.
You can create the extra folders in Home Folder/Library/Application Support/iWeb or, as I do, in a folder named iWeb in the Home folder.
Create a folder for each website, give it a suitable name and paste the Domain.sites2 file with all the websites into each.
Open each one in turn, double click the Domain.sites2 file to launch it in iWeb, delete all the sites except the one whose name is the same as the folder name, save and quit.
Now you can launch any site individually in iWeb and sent a copy of the appropriate folder to the client.

Measuring Points transfer to one total measuring point

Similar Messages

Maybe you are looking for