Measurment studio will not recognize LabWindows/CVI installation?

It order for me to use the Driver factory program to make a DLL, the program requires that LabWindows/CVI version 5.0 or greater be installed. Version 5.5 was installed first and Measurment studio does not recognize it. After installing the DAQ software, MAX does recognize both LabWindows/CVI and Measurment studio. Help!
Steve

Hi Steve,
What the IDF does, is
(1) Look for the installation of CVI in the registry under HKLM/Software/NationalInstruments/CVI/xxx. "xxx" being the version number.
(2) If there are multiple CVIs on the machine, IDF uses the highest version number of CVI located i.e.if you have
HKLM/Software/NationalInstruments/CVI/5.0
and HKLM/Software/NationalInstruments/CVI/5.5 it will pick 5.5.
(3) IDF will then look up the installDir key under this folder.
If either of (2) or (3) fails, you get the message you've been seeing.
So what do you see under that registry location ? Is the registry version folder, or the installDir key missing?
It is possible that the machine had installed a higher version of CVI , then uninstalled, but the folder a
nd key is still there, so you have a key with a higher version of CVI, with the installdir key pointing to a "" value, instead of a valid path....
If things do appear fine in the registry, then please reconfirm the software you have installed, as i under stand it, you have CVI 5.5, then installed MesurementStudio 6.0 ? I can try to then reproduce this.
I sincerely apologize for all the trouble that you have been having...I hope this makes things little clearer and hopefully we can get you started soon..
With regards to the other thread that you pointed to , it's possible that the evaluation CD did not install all the registry keys or installed them to a different location, or the user, did not install CVI at all...
Best Regards,
Nandan
Nandan Dharwadker
Staff Software Engineer
Measurement Studio Hardware Team

Similar Messages

How come the SQL Server Business Intelligence Studio will not recognize my AdventureWorksDW after installation?

I am trying to do the tutorial for SQL Server Business Intelligence Studio, but I can't get the AdventureWorksDW to be recognized by it, when I try to connect to it.
I have tried to shut down, restart, downloaded a couple of different versions of AdventureWorksDW (I believe 2008 is the one I need), and tried to attach this AdventureWorksDW using SQL Server Management Studio 2008R2, but I cannot even do that! The instructions
for attaching a DB tell me to open Management Studio, then open a connection instance. But then I cannot find the database button to right click on, or the attach item in the menu that is supposed to be there with it.
I had installed AdventureWorks2008R2 previously and the SQL Server BIDS sees that, but of course I cannot do the tutorial without some serious mods if I do that. I have rebooted computer, closed and reopened the BIDS app, deleted and re-created the
OLE-DB connection in BIDS, but nothing works. What am I doing wrong? I've worked in mostly the Oracle world for most of my career so I'm not new to either DW or relational DB, but this one is driving me to pull my hair. Any help greatly appreciated!
Badger

Thank you! Is this correct?
CREATE DATABASE AdventureWorksDW2008R2_data
ON
(FILENAME
=
'C:\SSIS Downloads\AdventureWorksDW2008R2_Data')
FOR
ATTACH_REBUILD_LOG
I tried this and it gives me a cannot find file specified error, but my file IS located at
C:\SSIS Downloads
error is:
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "C:\SSIS Downloads\AdventureWorksDW2008R2_Data". Operating system error 2: "2(The system cannot find the file specified.)".
I will continue to play with it, thanks very much!
Try as below,
sp_attach_single_file_db 'AdventureWorksDW2008R2'
,'C:\SSIS Downloads\AdventureWorksDW2008R2_Data.mdf'
Note: If you get any security issue then refer this link
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/232e4aaf-73cf-4eb8-9f6c-6a4fc91a6036/i-cant-attach-mdf-operating-system-error5
Regards, RSingh

Trying to install Adobe 10Pro on new Windows 8.1 computer. downloaded installer by it will not recognize my product key

Trying to install Adobe 10Pro on new Windows 8.1 computer. downloaded installer by it will not recognize my product key

Adding to what Pat has mentioned, I can also see that you have the serial number for both Mac & Windows. I hope you are using the correct key for the platform where in you are installing the product as that could be the only reason. Please check the keys once again and use the correct one and that should solve the concern.

I am trying to install my adobe acrobat XI Pro, but after i go thru the installation process, i get a message saying my free trial has ended, the system will not recognize my new product.

i am trying to install my adobe acrobat XI Pro, but after i go thru the installation process, i get a message saying my free trial has ended, the system will not recognize my new product.

Moved to Acrobat Installation & Update Issues

When I try to install WinXP using bootcamp, the iMac will not recognize the CD after it has already read all the information and is ready to begin installation. What is the problem?

When I try to install WinXP using bootcamp, the iMac will not recognize the CD after it has already read all the information and is ready to begin installation. What is the problem?

If your on 10.6.8 like you should be for security/stability updates, somewhere along the line a later Bootcamp version was issued and only supports Win 7.
You can read my post here for a alternative solution, running a virtual machine software
https://discussions.apple.com/thread/3772839?tstart=0

IMac 400dv will not recognize new hard drive installed

Hi,
I had been having trouble with my iMac 400dv's hard drive. I had posted the problems I was having and had gotten some very nice feedback. The final decision was to install a new hard drive and battery.
I purchased a refurbished 40GB Maxtor to replace my old 20GB. Installation was no problem except that my iMac will not recognize the new drive. If I reinstall the old one, it recognizes it right away, so I know it has been installed correctly.
I took the new hard drive back to the store and the tech said that it wasn't set on the "Master" position. He set it and tested the drive and said that it was fine. I reinstalled and get the same result, no drive can be sellected to install the software. No matter where I set the pin, I get the same result. I called the phone help line (MicroCenter) and the new tech told me that the drive was too big for my mac, which makes no sense to me since they suggested I buy a 100GB in the 1st place.
I have 1GB of memory, my installation disk if for 8.6 and I will bring it up to 9.2 if I can get it running again.
Any suggestions?
thanks,
Lucy

Lucy Rust...
In my opinion no Macintosh user should attempt to install a refurbished HD under any condition. Especially any HD that is to be bootable as they are no longer reliable for the Mac.
Master setting is a must for the HD and never tinker with an optical setting. Well, if you could mess with the optical setting, expect to do some micro-surgery.
You should be good for a HD up to a capacity of 120GB. The threshold is somewhere around 137GB but you will not find such odd capacity on the market.
I think the rest has been covered.
...Ron

PC will not recognize zen mi

My pc will not recognize my zen micro. I have reinstalled softwear, but it still does not see player. In device manager it sees it as an unknown device with no drivers. I can not figure out what to do. It is useless if I can not load any mp3s to listen to. Does anybody know what to do. Please let me know.

Try this update.
ZenMicro_PCFW_L4_2_00_2_MTP.exe
. /us.creative.com/support/downloads/download2.asp?Product_ID=0795&dlcentric=848&Produc t_Name=Creative+Zen+Micro+&OSName=Windows+XP]Download Now<IMG height=5 alt="" src="http://us.creative.com/images/dot-clear.gif" width= border=0><IMG height= alt="" src="http://us.creative.com/images/dot-clear.gif" width=8 border=0><IMG height= alt="" src="http://us.creative.com/images/dot-clear.gif" width=522 border=0>
This firmware update adds "PlaysForSure" or Media Transfer Protocol (MTP) functionality to your Zen Micro. As a PlaysForSure/MTP-enabled device, your Zen Micro will be recognized .....Show Details...
Filename: ZenMicro_PCFW_L4_2_00_2_MTP.exeCreative Zen Micro *PlaysForSure/MTP Firmware 2.00.2ZENM-FWMTP--L4
This firmware update adds "PlaysForSure" or Media Transfer Protocol (MTP) functionality to your Zen Micro. As a PlaysForSure/MTP-enabled device, your Zen Micro will be recognized on Microsoft? Windows? XP systems, without having to install drivers or software. Windows Media? Player 0 will be the primary application for content management between your Zen Micro and your computer.
IMPORTANT: 
Be sure to back up all the audio and data files on your Zen Micro before installing this firmware update as all content will be lost when you install the new firmware. After installing the PlaysForSure/MTP firmware, use Windows Media? Player 0 to restore audio and/or data files to your player.</LI>
This firmware will currently ONLY work on Windows XP.</LI>
Installation of this firmware may take up to 5 minutes, and your device may reboot a number of times during installation.</LI>
require software updates if you want to use any currently installed applications like Creative MediaSource?, Zen Media Explorer, or other track management tools with your player. if ((document.all.objCTSU==null)) document.write("(Click here)"); (Click here)</LI>
NOTE: This release does not support all types of subscription-based online music services. There will be a future firmware release where all Windows Media Digital Rights Management (DRM) 0 features will be supported.
Requirements:
Windows XP with Service Pack or 2</LI>
Windows Media? Player 0 installed on your computer</LI>
PlaysForSure/MTP devices enable you to:
Enjoy seamless support with any computer running Windows Media Player 0 and Windows XP - no drivers or software needed</LI>
Drag-and-drop songs or files to your player through Windows Explorer</LI>
Use Auto Sync and Windows Media Player 0 playlist support</LI>
Support future subscription-based online music services</LI>
PlaysForSure/MTP-enabled devices may:
reduce the maximum number of media files because of additional memory requirements.</LI>

Firefox will not recognize java plugin that has been installed and worked 1 day ago.

I have an IMac with OSX 10.5.8, Firefox 5.0, One day ago it worked fine, today when going to a specific site that requires Java, Firefox will not recognize that Java is installed. I checked for updates and there are none. Java is installed and the site works fine with Safari, which requires Java as well. How can i get Firefox to recognize Java installation.

Apple has removed support for the Java Plugin2 with the latest Java Update 10 for OS X 10.5 Java version, so the Java plugin is no longer available for Firefox versions and other browsers like Google Chrome that require the Java Plugin2.
The Java Plugin2 plugin is still there, but he softlink to it has been removed with this update, so Firefox doesn't find the plugin.
There will be fix for this in the next release (Firefox 5.0.1 or 6), so that Firefox will find the plugin again.
I don't know if all Java applets will still be working on OS X 10.5 with that JP2 plugin (Apple recommends updating to OS X 10.6 for OS X 10.5 users with an Intel Mac).
* [/questions/844734]
* [/forums/contributors/707078]

How can you get Premiere Elements to recognize hardware. It will NOT recognize my Dazzle Video Capture device or either of two HP DVD burntes. I feel like I wasted my money.

That should have read, It will NOT recognize my Dazzle device or either of 2 HP DVD burners.

TNTerri
What version of Premiere Elements are you using and on what computer operating system is it running?
If Premiere Elements 13, please be advised that it does not support DV or HDV capture firewire. And, any USB devices
have never worked for that purpose for Premiere Elements (any version).
As for the burner not being recognized in the Burner Location field of burn dialog of the program, please consider
(if you are dealing with DVD CD burner rather than a Blu-ray DVD CD burner.
CD, DVD drive not recognized after Adobe application install | Windows
Depending on how matters progress, you may want to do an uninstall reinstall using the following scheme
Uninstall, the usual Control Panel way
Do a free ccleaner run through to get rid of leftovers from incomplete installs reinstalls
CCleaner - PC Optimization and Cleaning - Free Download
Reinstall with antivirus and firewall(s) disabled.
We might even involve later a deletion of the Adobe Premiere Elements Prefs file and, if necessary, the whole Folder in
which it exists. More on the latter later.
ATR

My 15" iMac G4 800mhz will not recognize my iPhone 4s at all. Please Help, There is more information below. Thanks.

My 15" iMac G4 800mhz will not recognize my iPhone 4s at all. It charges but doesn't load as external memory or in itunes.
I am running OS X 10.4.11 and using iTunes 9.2.1.
I have tried to be as specific as possible, I hope somebody can help as this is the main thing I will be using my mac for.
Thanks in advance.

....and an 800mHz Mac cannot officially run 10.5.8. There may be some third-party hacks to allow tricking the installer into thinking the computer qualifies and permit the install to continue, but 10.5 will be very sluggish on that machine even if you have a lot of RAM.
The other problem is valid 10.5 retail install disks. They are getting hard to find, only on DVD (not all early iMacs have DVD-capable drives), and often sell today for more than their original price of US$129.

Imac4,1 will not recognize the app store

Hello,
I have an iMac 4,1 and it will not recognize the app store. It did not bother me until i realized that iphoto and the address book were not on the computer. How do i get the computer to recognize the app store so i can download these apps.

Were you running iPhoto 9? If not do you have the disks that came with your iMac? It will have the iPhoto that came with your Mac, iPhoto 5 (06) on a disk similar to one of these:
If you were using a later version of iPhoto you will need the iLife disk it came on or, if it was iPhoto 9, get to the App Store to redownload it. So what version were you using before this happened?
As for the Address book you'll have to reinstal it from the Snow Leopard disk that you used to install Snow Leopard. It will be in the Optional Installs.pkg that's in the Optional Installs folder on the disk:
OT

I movie 6 will not recognize panasonic dv 1000

Hi
Any idea why i movie 6 will not recognize panasonic dv 1000 deck. It will start the deck but not record anything into bin?

I used the recommended Audio MIDI Setup fix and now my Sony DCR-HC21 works fine with iMovie 5.0.2. Go into Audio MIDI Setup in your Utilities folder. A window opens and the third section (on the bottom of the window) is "Audio Input" The line "Format" offers a drop-down window with various frequency levels. I chose 48000.0 Hz. For good measure, I changed "Audio Output" to have the same frequency setting.
After that, with no restart, no pulling out cables, etc., iMovie was working correctly with the Sony Handycam.
Thanks to a post further down from Sue.

My new Dell Win 8 PC does not recognize my CS5 installation disk.

My new Dell Win 8 PC does not recognize my CS5 installation disk.
I'm willing to download from the web, but I can't find the right site.

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

DVDPlayer not recognizing DVD. I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and will not recognize/play a dvd movie...it thinks it is a blank dvd. The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4).

IMAC DVD Player does not recognizing dvd movie . I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and it will not recognize/play a dvd movie...it thinks it is a blank dvd. The IMAC will play rented dvd movies. The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4) abd in my external Sony DVD Player The dvd move was made/burned on a PC. Why will a dvd movie play on my Macbook Pro and not my IMAC?

Hello:
This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
When the DVD is in the drive (and DVD players is open) click on File>get disk info.
Barry

TS1363 my computer will not recognize my iphone

My iphone has been working fine with my computer. After I did an update for itunes today, the phone froze up and will not work at all. It has a picture stating to connect it to itunes, which it is. The itunes will not recognize the iphone now. help!

Phone not recognised in itunes
device not recognised by iTunes on PC or device not recognised by iTunes on Mac
Some of those things which concern itunes also help with your problem. In particular try rebooting the computer, try a different USB cable to attach the phone or try a different port

Measurment studio will not recognize LabWindows/CVI installation?

Similar Messages

Maybe you are looking for