Measurment through a vibration sensor interfaced with Ni-PXI is very low & less responsive. I wana know any frequency limitations is there for PXi or the system uses any clipping ckts inside ???

It would be helpfull to know what PXI hardware and what sensor you are using.
Up to now I only found mechanical limitations ....
(Creating a 100kHz sinus exitation with 160nm amplitude need more than 63km/s² (>6400g) acceleration )
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

Similar Messages

HT1491 I can't process the purchase with my account, however I checked my details but its all fine. I think there is problem in the system

.

What happens when you try to buy something ?
If you are getting a message to contact iTunes support then you can do so via this page and ask them why the message is appearing : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

I'm running Windows 7 and iTunes and the other Apple programs wouldn't automatically update. Went through all the options and finally had to delete all Apple files and re-download iTunes. Worked fine, until the next update. Is there a glitch in the system

I'm running Windows 7 and iTunes (and the other Apple programs) wouldn't automatically update. Went through all the options and finally had to delete all Apple files and re-download iTunes. Worked fine, until the next update. Is there a glitch in the system? Does someone know of some proprietory block (I think it is related to Quicktime)? Also, once I re-downloaded everything, cleaned everything up, and deleted duplicate files, I closed down my computer. When I re-started it, iTunes was "brand new" -- all of my music, organization, tagging, etc. was gone and had to start over. Idea?

Ok, so after like 4 days of going through all these different issues, I figured out that several programs weren't downloading, and it was an issue with my wireless connectivity messing up the digital signatures, so if you plug in your comp to the modem and delete your temp files, it should start to work!

I have Adobe Reader XI with the package that allows me to send pdfs and convert pdfs to Word. When I open a pdf and try to search the search shows no matches even though the word I am searching for is in the document. Any suggestions how to search?

I have Adobe Reader XI with the package that allows me to send pdfs and convert pdfs to Word. When I open a pdf and try to search the search shows no matches even though the word I am searching for is in the document. Any suggestions how to search?

Once again, my thanks for your assistance. If I may impose on your generosity one more time, if I understand you correctly if I create a document on Word or WordPerfect, print it and scan it to create a pdf, the search function will not work. But, if I create the pdf document in Word the search function will work. Unfortunately, I am not sure how I create a pdf document in Word other than by printing it and scanning it. Could you please explain.
William B. Kohn, Esq.
General Counsel
Paul V. Profeta & Associates, Inc.
769 Northfield Avenue
Suite 250
West Orange, New Jersey 07052
(973) 325 - 1300
(973) 325 - 0376 (Facsimile)
[email protected]<mailto:[email protected]>

I want replace my desktop with a iPad to do emails and Microsoft office work. Can this be effectively done? What's the downside if any?

I want replace my desktop with a iPad to do emails and Microsoft office work. Can this be effectively done? What's the downside if any?

I'll go down your list one by one.
1. Access mail - which I know that the iPad can do.
Enough said.
2. Save an excel or word or ppt of PDF attachment for review.
You can view these types of documents natively on the iPad as Tgara has mentioned.
3. Open an review and maybe change a excel or word file.
There are many apps that allow this. I personally prefer Apples iWork programs, Pages, Numbers, Keynote. They tightly integrate with iCloud.
4. Resave such above files.
With Pages, Number, Keynote you can save/resave files in iCloud and locally. Also you could use dropbox to save your files on dropbox and provide a way for you to share a folder with coworkers/family and they can add/view/review files from there and you can see the changes on your device.
5. Reply to a mail attaching a file.
This is possible in many ways. From dropbox, or another app you can email files with the share button.
6. Be able to rename files and store them in specific folders.
This goes back to dropbox/iCloud. iOS doesn't really have a traditional file system. If you save a PDF it isn't saved anywhere you can just open it. You would have to open an app that supports view PDFs and select the PDF you wish to view. The same goes for documents, spreadsheets and etc.
Hopefully this helps answer your questions.

A slide show with audio created in PSE 9 plays fine in edit. When brought to Premier Elements for dvd burn, the audio no longer plays. It appears in the edit, but no audio is played. This happens consistently. What setting might be wrong?

A slide show with audio created in PSE 9 plays fine in edit. When brought to Premier Elements for dvd burn, the audio no longer plays. It appears in the edit, but no audio is played. This happens consistently. What setting might be wrong?

H-SPhoto
That Photoshop Elements 9.0.3 Update has generally been discouraged by the Photoshop Elements gurus. But, I am not going to factor that into this at this point.
This is what I would ask you to look at in the Elements Organizer 9 accessed from the Photoshop Elements 9 or Premiere Elements 9.
a. Create your slideshow in the Elements Organizer 9/Create/Slideshow/Slideshow Editor. Then use the Output option of Edit with Premiere Elements.
From your description, you are probably using the Output Option of Burn to Disc DVD which will take your slideshow directly in the Disc Menu section of Premiere Elements 9. The preferred transfer of the Elements Organizer 9 slideshow to Premiere Elements 9 Editor is by the non wmv route "Edit with Premiere Elements" not the wmv route of Burn to Disc DVD.
Let us explore if any of the above is involved in your issue and then we will decide what next if necessary.
Thanks.
ATR

After update 6.0.1 i have problem with soun it become very low pls solve thise by update another can i restoer to 6 another time

after update to 6.0.1 the sound very low how solve thise problem can i restor to ios 6 another time you solve problem battery by update 6.01 but you make problem with rining sound pls solve solve problem

http://support.apple.com/kb/TS2802

Strange problem with broadband. Speed very low.

Hi all,
From last Friday I encountered really big problems with my broadband as the speed go dramatically down. I don't know what may be the reason, I'm using HomeHub and between it and computers in my household everything is fine. I haven't heard about any fixes round Aberdeen so have completely no clue what is going on.
Do you have any clue what can cause the problem, for more than 3 years everything was just great. Maybe my HomeHub is old and faulty, it is the 1st gen, white one.
I post speedtest results and ADSL info:
Download speedachieved during the test was - 134 Kbps
For your connection, the acceptable range of speedsis 4000-21000 Kbps.
Additional Information:
Your DSL Connection Rate :18761 Kbps(DOWN-STREAM), 888 Kbps(UP-STREAM)
IP Profile for your line is - 16000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 0.0:75.22:25.5 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
Upload speed achieved during the test was - 692 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 888 Kbps
DSL Connection
Link Information
Uptime:
3 days, 22:26:20
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
888 / 18,762
Data Transferred (Sent/Received) [MB/GB]:
350.53 / 4.65
Output Power (Up/Down) [dBm]:
11.5 / 0.0
Line Attenuation (Up/Down) [dB]:
4.5 / 14.0
SN Margin (Up/Down) [dB]:
15.0 / 5.0
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
0 / 0
FEC Errors (Up/Down):
0 / 246,017
CRC Errors (Up/Down):
0 / 46
HEC Errors (Up/Down):
0 / 39
Line Profile:
Fast
Solved!
Go to Solution.

Update.
First, do you always get reply from MODS? Today my connection dropped and after a while it was on again, I found my SN Margin reset to 6.5 and better bandwith 1205 / 19832 but the speed didn't improve at all. It is 24h since I've sent notice to MODS and I will wait another 24h before contacting them again. What really worries me is FEC Errors field in my ADSL Line details. Last time after 4 days it was 245'000, now after 6 hours I have more than 750'000. Is that normal after connection drop? I've checked speed using this speedcheck provided and my profile is still the same, 16000kbs
UPDATE:: 40 minutes past, 35 MB more dowloaded and 100'000 FEC Errors more :/
I paste details below:
DSL Connection
Link Information
Uptime:
0 days, 6:01:26
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
1,205 / 19,832
Data Transferred (Sent/Received) [MB/MB]:
38.53 / 275.66
Output Power (Up/Down) [dBm]:
12.0 / 0.0
Line Attenuation (Up/Down) [dB]:
4.5 / 14.0
SN Margin (Up/Down) [dB]:
6.5 / 4.0
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
1 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
1 / 0
FEC Errors (Up/Down):
0 / 769,697
CRC Errors (Up/Down):
0 / 8
HEC Errors (Up/Down):
0 / 5
Line Profile:
Fast

Help with DAQmx tension measurement and saving to spreadsheet file with NI USB-6218 (very urgent !)

Hello people,
I've been given at the last minute a project at school where I need to do some data acquisitions (tensions) with a DAQ NI USB-6218 and it has
been miserable ever since, I first tried the "easy" way with DAQ assistant to save a given number of samples per channel to a text file
in order to use it in matlab, well...it isn't working : every time in my text file I have a different number of samples, I used the "Write to spreadsheet" function within a while loop where I wired the path outputs to a shift register in order not to have it asking me the path all the time,
but I'm still not getting the X number of samples per channel as specified at the beginning.
So I've been using another method with the DAQmx where I get each individual waveform into a vector of samples, when I look for the size
of the vector it looks Ok, 100 in my case but the problems start when I try to have a text file where each column will represent a channel for
subsequent matlab treatment, what I'm doing doesn't seem to be working, it's really unbearable, please help me sort this mess out.
I'll add both VIs as attachment so it can help you help me, thank you.
Basically what I need is to acquire 15 tensions with a given number of samples per channel (the same for each channel) and then plot it in matlab.
Note the first VI has switches to "unblock" each channel but it doesn't seem to be working, please look at both VIs.
It's very urgent, I could fail my school year if I fail this project.
Thank you very much for your help.
Attachments:
Projet EM acquisition - Copie.zip ‏78 KB
projet autre version envoyer sur forum.zip ‏20 KB

Hi Thank you very much for your help, in the meantime, I've changed the project to (see attachment), now
it is at least writing the waveforms to the txt file, but again there is an another problem, it seems to be ignoring the
number of samples I specified per channel, it seems to be writing into the txt file for as long as I keep the VI running.
What is missing ? Also I'd like to have a clock for my samples, that is when I plot in matlab I do not just plot random numbers, but the
physical analogical inputs as a function of time, that is for instance the first line corresponds to time 0, line 2 to time 0,001
ect...How could I do that ? For the meantime I got only 5 channels, when I know what my mistake is, I'll expand it to 15 channels.
Please help me.
Attachments:
acquisition 5 voies.zip ‏61 KB

Im having problems with Photobucket..sending my customized photos to friends on myspace. They claim it works for them But the albums freeze and i cannot send HELP...

problem with photobucket..When i get ready to send out comments to myspace from my customized albums..it freezes and im not able to send. They say it works for them and gave me a long line of things to do..I have attempted that..it still doesnt work..Im aggravaded beyond belief..

THANK YOU SO MUCH stussaar!
My Mother did what you said for the Spam and my number was in there about 100 times. She deleted all them. Deleted me as a contact and then rebooted, then she text me and I text her back and I went right into the Spam again. I told her to tell TMobile this so then can maybe help and remove my number from Spam on their end.\
Thanks you so much! you got us 99.999 % the way there!!
I appreciate your help!!!! I hope this worked also for your problem!!
Thanks again!!!
Mike

Each time i try syncing my ipod with itunes, it freezes itunes and i end up having to shut down my computer. This happened after the latest download, any suggestions?

each time i try syncing my ipod with itunes, it freezes itunes and i end up having to shut down my computer. This started happening after the latest download and my latest purchase. The latest purchase doesn't show up on my iPod and itunes freezes at synching step 2 on 2. Any suggestions?

You should Reset your iPod, by
1. Press Menu and Center button simultaneously for about 10 Secs till the Apple Logo comes ON.
2. Disconnect the sync cable.
3. Check the iPod Welcome screen, select language, go to menu (if you are lucky, your music are still on the iPod.)
if your iPod doesn't show the Welcome screen, bring it to Apple Store.
If the above is okay, (can see Menu but no Music)
4. Close iTunes and Reboot your PC.
5. Start iTunes
6. Connect the iPod to the Sync cable.
7. if iTunes ask to Restore, please do so.
8. Sync your iPod. ( I would advise you to disconnect from Internet and stop the Antivirus program when doing this.)
Good Luck.

TS3276 Hello all, I am getting the following message with some emails I receive:- HTML enabled email client required to read this email. I don't really understand this and don't know what to do to allow me to open the email. Any help? Thanks, Alex

Hello all, I am getting the following message with some emails I receive:- HTML enabled email client required to read this email. I really don't understand this message, am non techy, would anyone know how I can open and read the email? Thanks very much for any help, Alex

In Mail I suggest you try 'View->Message->Plain text alternative'.
Why? In multipart/alternative messages, such as this, the text/plain version should precede the text/html version, but Toyota have swapped them around. By default mail clients display the second version, assuming it to be HTML.
Very strange.

Re: Strange problem with broadband. Speed very low...

What is going on with my BT Broadband speed...?
Download 0.25 Mbs and up load of 0.09 mbs..
This just can't be right...?
Frustrated subscriber.. Glenn :-(

I moved you post to start a new thread as previous one was marked as solved by originator
welcome to the BT community forum where customers help customers and only BT employees are the forum mods
in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems). when first test completes then run diagnostic test and post the results .
are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

When I shut my MacBook Pro, I cannot restart it--I get ablank blue screen with a little flicker like it wants to open but it can't. Is there a way around the problem?

I did a clean reinstall on my Mac Book Pro and in the process I lost my Espon print drivers. I went to th eEspon site and downloaded what was needed. I installed per instructions. I was told to reboot, but all I got was a blank blue screen. I shut down the computer again all got was a blank blue screen. What should I do> How can circumvent the usual satrtup procedure.
Tom Ackerly

Start up in Safe Mode.
http://support.apple.com/kb/HT1455
Best.

Hi, I have Apple earbuds that came with my iPod years ago, since then they've ya know, taken some hits, but they still work. The problem is the left isn't as loud as the other and it sounds really odd. Can I get them replaced at the Apple Store?

As said in the question, the left isn't as loud or harmonic as the other, can I replace them at the Apple Store? Hopefully for free?

The headphones have the same one-year warranty as the rest of the hardware. But it still can't hurt to ask an Apple store agent about replacements. Realistically, though, you'll probably just ahve to buy a new pair.

Measurment through a vibration sensor interfaced with Ni-PXI is very low & less responsive. I wana know any frequency limitations is there for PXi or the system uses any clipping ckts inside ???

Similar Messages

Maybe you are looking for