Meata data extract Utilities very urgent
Hi all my peers,
What are Metadata extract Utilities?
Will these utilities use in real time or just on option for Metadata can be extract through Utilities
Please explain me about this process Clearly
Hi,
For " Extraction Using Table" the system does not create an extract structure automatically if the Amount field (type CURR) and currency key field (type CUKY ) are in different tables . Hence u create a View of the data table and the reference table (Say PA0002 and T001) wherein, include all the fields from PA0002 and just the referenced fields from T001 so that all the fields come under the view.
But if the above solution is not possible say for ex. if the key fields don't match , then u should go for function modules.
Regards
Similar Messages
-
Generic Data Source Creation (Very Urgent)
Hi Friends,
I am getting errors while i am creating Generic Data source using Table "ECMCT" .This table contains all fields which is required for my Data Source.
---> I gave <b>ECMCT</b> table in "Extraction from DB view " but when i click save its showing error message "INVALID EXTRACT STRUCTURE TEMPLATE ECMCT OF DATASOURCE ZFI_ECMCT(is name of my data source)".
> I created Function Module using this Table.
In Function Module "Tables tab"
i gave "ITAB LIKE ECMCT".
In "Source Code tab"
i gave "SELECT * FROM ECMCT INTO TABLE ITAB".
In RSO2 "Extraction Using Function Module"
i gave FM name and Extract Structure name as ECMCT. After clicking save its showing ERRORS:
1) ZFI_ECMCT(is my data source name) : Tables parameter E_T_DATA for Extractor ZFI_CONSOLIDATION(is my Function module)
2) Units field CURR1 for feild HSLVT of datasource ZFI_ECMCT is hidden.
3) ......................................HSL01.....................................................
4)........................................HSL02...................................................
;etc.
Could u anybody suggest me where i am doing wrong. This is very very urgent for me.
Thanks,
Mani.Hi,
For " Extraction Using Table" the system does not create an extract structure automatically if the Amount field (type CURR) and currency key field (type CUKY ) are in different tables . Hence u create a View of the data table and the reference table (Say PA0002 and T001) wherein, include all the fields from PA0002 and just the referenced fields from T001 so that all the fields come under the view.
But if the above solution is not possible say for ex. if the key fields don't match , then u should go for function modules.
Regards -
Error in Personnel Data Iview (its very urgent)
Hi All,
Personal Data
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
failed to create or init instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN' in scope APPLICATION_SCOPE with instanceId 'null'
Caused by: com.sap.tc.webdynpro.progmodel.model.api.WDModelException: failed to create instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN'
at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getNewModelInstance(WDModelFactory.java:392)
at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getOrCreateModelInstanceFromScopeMaintainer(WDModelFactory.java:329)
... 65 more
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: no jcoMetadata found for RFC function 'HRXSS_PER_GET_F4_P0002_IN'! Please verify, that your model is consistent with the ABAP backend: 'EC6'.
Hi Please help me to solve this error it's very urgent ?
thanks and regards,
Phanikumar.Hi,
I am not very much sure about this.
Are u calling a BAPi from WD application?
If yes then the error seems to be that : JCOs metadata is not available.
Please check that ur JCO definitions in portal and make sure the name in Portal and the name u defined in WD application are same( case sensitive).
Also TEST JCO in Portal.
Please revert back with current status and explain ur problem a bit more.
Regards,
Sumit -
Time overlapping of data record..very urgent
Hi All,
while loading time dependent data(texts..0HRPOSITION), i am geeting the following error....
Processing (data packet): Errors occurred
Data Package 1 ( 7418 Records ) : Errors occurred
Update ( 0 new / 0 changed ) : Errors occurred
Data records for package 1 selected in PSA - 2 error(s)
Record 7415 :0HRPOSITION : Time overlapping of data record 7415 with 7416 : '['20100924'/'20070618'] " .
Record 7416 :0HRPOSITION : Time overlapping of data record 7415 with 7416 : '['20100924'/'20070618'] ....
Could anyone let me know how to rectify this error and reload the IP..I am workning on production system.....its very urgent
Thanks in advance.
ManjulaHi Manjula
!)0HRposition infobject and check what is the time previously for that record..
2)Edit the PSA for the 7415 or 7416 and change the vlaue to the previous record time which u found in the infoobject
3) i think ur doing a full load. so better edit the PSA and repload the data from PSA
Regards
AK -
Download data to Excel- very urgent pls help
Hi Experts
Following is my coding. i need to download and save the it_material table as Excel file.
pls help me out
REPORT zvio1001 LINE-SIZE 190
LINE-COUNT 55
MESSAGE-ID zz
NO STANDARD PAGE HEADING.
TABLES: mara,marce,makt,marc,mvke,zmpkg,t005t,cdhdr.
DATA : BEGIN OF it_mara OCCURS 0,
mandt LIKE mara-mandt, "Client
matnr LIKE mara-matnr,
meins LIKE mara-meins,
laeda LIKE mara-laeda,
aenam LIKE mara-aenam,
END OF it_mara.
DATA : BEGIN OF it_marc OCCURS 0,
matnr LIKE marc-matnr,
werks LIKE marc-werks,
END OF it_marc.
DATA : BEGIN OF it_makt OCCURS 0,
matnr LIKE makt-matnr,
maktx LIKE makt-maktx,
END OF it_makt.
DATA : BEGIN OF it_zmpkg OCCURS 0,
matnr LIKE makt-matnr,
zppqt LIKE zmpkg-zppqt,
zspqt LIKE zmpkg-zspqt,
zpmqt_3 LIKE zmpkg-zpmqt_3,
END OF it_zmpkg .
DATA : BEGIN OF it_material OCCURS 0,
mandt LIKE mara-mandt, "Client
werks LIKE marc-werks,
matnr LIKE marc-matnr,
maktx LIKE makt-maktx,
meins LIKE mara-meins,
zppqt LIKE zmpkg-zppqt,
zspqt LIKE zmpkg-zspqt,
zpmqt_3 LIKE zmpkg-zpmqt_3,
laeda LIKE mara-laeda,
aenam LIKE mara-aenam,
date LIKE sy-datum,
time LIKE sy-uzeit,
user LIKE sy-uname,
END OF it_material.
P a r a m e t e r s *
Start of tabbed screens
SELECTION-SCREEN BEGIN OF TABBED BLOCK list FOR 20 LINES.
SELECTION-SCREEN TAB (30) gc_gen USER-COMMAND gen_tab
DEFAULT SCREEN 1001.
SELECTION-SCREEN TAB (30) gc_view USER-COMMAND view_tab
DEFAULT SCREEN 1002.
SELECTION-SCREEN TAB (30) gc_outp USER-COMMAND outp_tab
DEFAULT SCREEN 1003.
SELECTION-SCREEN END OF BLOCK list.
SELECTION-SCREEN BEGIN OF SCREEN 1001 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK box01 WITH FRAME TITLE text-401.
PARAMETERS : p_werks LIKE marc-werks OBLIGATORY.
PARAMETERS : p_vkorg LIKE mvke-vkorg OBLIGATORY.
SELECT-OPTIONS : s_matnr FOR mara-matnr.
SELECT-OPTIONS : s_mtart FOR mara-mtart.
SELECT-OPTIONS : s_mmsta FOR marc-mmsta. "A01
SELECT-OPTIONS : s_dispo FOR marc-dispo.
SELECT-OPTIONS : s_beskz FOR marc-beskz.
SELECT-OPTIONS : s_lgpro FOR marc-lgpro.
SELECT-OPTIONS : s_lgfsb FOR marc-lgfsb.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-014.
PARAMETERS : p_repall RADIOBUTTON GROUP sel2 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-011.
PARAMETERS : p_change RADIOBUTTON GROUP sel2.
SELECTION-SCREEN COMMENT 36(1) text-013.
PARAMETERS : p_chgdat LIKE sy-datum DEFAULT sy-datum.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-010.
PARAMETERS : p_excdel AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK box01.
SELECTION-SCREEN END OF SCREEN 1001.
View Selection Screen
SELECTION-SCREEN BEGIN OF SCREEN 1002 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK box05 WITH FRAME TITLE text-403.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(77) text-109.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-021.
PARAMETERS: p_sales AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN COMMENT 38(20) text-022.
PARAMETERS: p_mrp AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-023.
PARAMETERS: p_store AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN COMMENT 38(20) text-024.
PARAMETERS: p_accnt AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-025.
PARAMETERS: p_cost AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN COMMENT 38(20) text-026.
PARAMETERS: p_purch AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK box05.
SELECTION-SCREEN END OF SCREEN 1002.
SELECTION-SCREEN BEGIN OF SCREEN 1003 AS SUBSCREEN.
extract format selection
SELECTION-SCREEN BEGIN OF BLOCK box04 WITH FRAME TITLE text-402.
PARAMETERS : p_vari LIKE ltdxt-variant OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-009.
PARAMETERS: p_report RADIOBUTTON GROUP sel1 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-016.
PARAMETERS : p_repcoo RADIOBUTTON GROUP sel1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-017.
PARAMETERS : p_reppak RADIOBUTTON GROUP sel1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-008.
PARAMETERS: p_extun RADIOBUTTON GROUP sel1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-007.
PARAMETERS: p_extpc RADIOBUTTON GROUP sel1.
SELECTION-SCREEN END OF LINE.
PARAMETERS: p_pcfile LIKE rlgrap-filename
DEFAULT 'c:\#ups\CLIENTIDCCYYMMDDHHMMSS.ITM'.
DEFAULT 'd:\P0121205MMM_YYYYMMDD HHMMSS.XLS'.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(40) text-015.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK box04.
SELECTION-SCREEN END OF SCREEN 1003.
F i e l d S y m b o l s *
FIELD-SYMBOLS: <f>.
D a t a *
common include for file layouts
INCLUDE zvin1010.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'P_PCFILE'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
I N I T I A L I Z A T I O N *
INITIALIZATION.
gc_gen = text-401.
gc_outp = text-402.
gc_view = text-403.
SET up the file directory depending on the system id.
GET PARAMETER ID 'WRK' FIELD p_werks.
GET PARAMETER ID 'VKO' FIELD p_vkorg.
CLEAR s_mtart.
s_mtart-sign = 'E'.
s_mtart-option = 'EQ'.
s_mtart-low = 'ROH'.
s_mtart-high = ''.
APPEND s_mtart.
CLEAR s_mtart.
s_mtart-sign = 'E'.
s_mtart-option = 'EQ'.
s_mtart-low = 'MFPK'.
s_mtart-high = ''.
APPEND s_mtart.
CLEAR s_mtart.
s_mtart-sign = 'E'.
s_mtart-option = 'EQ'.
s_mtart-low = 'VERP'.
s_mtart-high = ''.
APPEND s_mtart.
START-OF-SELECTION.
check that the download is active
PERFORM get_data.
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM get_data .
SELECT mandt matnr meins laeda aenam
FROM mara
INTO TABLE it_mara
WHERE matnr IN s_matnr.
IF NOT it_mara[] IS INITIAL.
SELECT matnr werks
FROM marc
INTO TABLE it_marc
FOR ALL ENTRIES IN it_mara
WHERE matnr = it_mara-matnr
AND werks = p_werks.
SELECT matnr maktx
FROM makt
INTO TABLE it_makt
FOR ALL ENTRIES IN it_marc
WHERE matnr = it_marc-matnr
AND spras = 'E'.
SELECT matnr zppqt zspqt zpmqt_3
INTO TABLE it_zmpkg
FROM zmpkg
FOR ALL ENTRIES IN it_marc
WHERE matnr = it_marc-matnr
AND werks = p_werks.
ENDIF.
LOOP AT it_mara.
READ TABLE it_marc WITH KEY matnr = it_mara-matnr.
IF sy-subrc EQ 0.
READ TABLE it_makt WITH KEY matnr = it_mara-matnr.
IF sy-subrc EQ 0.
READ TABLE it_zmpkg WITH KEY matnr = it_mara-matnr.
IF sy-subrc EQ 0.
it_material-mandt = it_mara-mandt.
it_material-matnr = it_mara-matnr.
it_material-maktx = it_makt-maktx.
it_material-meins = it_mara-meins.
it_material-laeda = it_mara-laeda.
it_material-aenam = it_mara-aenam.
it_material-werks = it_marc-werks.
it_material-zppqt = it_zmpkg-zppqt.
it_material-zspqt = it_zmpkg-zspqt.
it_material-zpmqt_3 = it_zmpkg-zpmqt_3.
it_material-date = sy-datum.
it_material-time = sy-uzeit.
it_material-user = sy-uname.
APPEND it_material.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " GET_DATAHi Kumar,
After building your it_material internal table, try using GUIO_DOWNLOAD to load the data into an excel sheet.
check this sample code.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = SELECT_FILE " Filename
FILETYPE = 'ASC'
APPEND = ' '
TABLES
DATA_TAB = ITAB_STR_1
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
EXIT.
ENDIF.
Hope this is helpful to you. If you need further information, revert back.
Reward all the helpful answers.
Regards
Nagaraj T -
Hi Experts ,how to copy database schema without data ? very urgent...*****
Hi experts,
How to copying database without Data.
Its very urgent..pls help out me......
Thanks
VijayUse Transfer database objects task or script the objects out using generate scripts wizard from SSMS and apply them in the new server
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Initialialized delta process(very urgent)
Hi all,
I am loading transaction data into master data table and the update mode is initialized data process.Today the loading were failed showing processing is overdue and i have made the QM status red and deleted the request.When i reran the infopackge its giving the message " delete init request requ_dr1.... before running init with same selection".I have checked in data request this request number is not there.
the datas are loaded daily as "initialized delta processc" update method..
Could anybody tell me how to delete the request and again reload the data..its very urgent...
Thanks
Manjulahi...
did u upload to target level or not...?where u got the red alert in update level or target level...?before dis you should know the delta mode functiion...intially you can upload the datas using full mode....if use full mode that will take the datas only once for target...for example....if you are loading 40 records...when the uploading process method have done without any mistakes...it's showing 40 records in the target level also..
DELTA MODE:
but you are getting only 30 records...you may upload the remaining 10 datas by delta mode function...through a new source file...
if you can't get my point ...mssg me....
regards,
ramanan.. -
Personnel Data Iview Error (It's very Urgent)
Hi All,
Personal Data
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
failed to create or init instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN' in scope APPLICATION_SCOPE with instanceId 'null'
Caused by: com.sap.tc.webdynpro.progmodel.model.api.WDModelException: failed to create instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN'
at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getNewModelInstance(WDModelFactory.java:392)
at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getOrCreateModelInstanceFromScopeMaintainer(WDModelFactory.java:329)
... 65 more
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: no jcoMetadata found for RFC function 'HRXSS_PER_GET_F4_P0002_IN'! Please verify, that your model is consistent with the ABAP backend: 'EC6'.
Hi Please help me to solve this error it's very urgent ?
thanks and regards,
Phanikumar.Hi Ashutosh Gulkhobre,
I coppied the dump from the ST22.
Now please tell me solution fro this error ?
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception CX_SY_REF_IS_INITIAL
Date and Time 27.06.2007 09:54:55
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
"SAPLHRXSS_PER_MAC" or "LHRXSS_PER_MACU04"
"HRXSS_PER_CLEANUP"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"HRXSS_PER_CLEANUP" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "ptgsap10"
Network address...... "192.168.1.18"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "PTGSAP10"
Database type..... "ORACLE"
Database name..... "EC6"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 29 2006 00:18:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 75
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 2090448
Heap.... 0
Page.... 0
MM Used. 1208256
MM Free. 880672
User and Transaction
Client.............. 001
User................ "ESS_USER1"
Language Key........ "E"
Transaction......... " "
Program............. "SAPLHRXSS_PER_MAC"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 645
Kernel Release...... 700
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........." "
Function Module..... "HRXSS_PER_CLEANUP"
Call Destination.... "ptgsap10_EC6_10"
Source Server....... "EPSAND1"
Source IP Address... "192.168.1.36"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in
"HRXSS_PER_CLEANUP".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 13
of the (Include) program "LHRXSS_PER_MACU04".
The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLHRXSS_PER_MAC "; its source code begins in
line
1 of the (Include program "LHRXSS_PER_MACU04 ".
Source Code Extract
Line SourceCde
1 FUNCTION hrxss_per_cleanup.
2 *"----
3 ""Local interface:
4 *" EXPORTING
5 *" VALUE(MESSAGES) TYPE BAPIRETTAB
6 *"----
7
8 * CALL METHOD mac_adapter->cleanup
9 * IMPORTING
10 * messages = messages.
11
12 * TRY.
>>>>> CALL METHOD xss_adapter->cleanup
14 .
15 * CATCH CX_HRPA_VIOLATED_ASSERTION .
16 * ENDTRY.
17 IF NOT xss_adapter2 IS INITIAL.
18 CALL METHOD xss_adapter2->cleanup.
19 ENDIF.
20
21 ENDFUNCTION.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 2
SY-TABIX 13
SY-DBCNT 30
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20070627
SY-UZEIT 095455
SY-XPROG SAPLHRXSS_PER_MAC
SY-XFORM HRXSS_PER_CLEANUP
Active Calls/Events
No. Ty. Program Include Line
Name
4 FUNCTION SAPLHRXSS_PER_MAC LHRXSS_PER_MACU04 13
HRXSS_PER_CLEANUP
3 FORM SAPLHRXSS_PER_MAC LHRXSS_PER_MACU04 1
HRXSS_PER_CLEANUP
2 FORM SAPMSSY1 SAPMSSY1 85
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 4 Ty. FUNCTION
Name HRXSS_PER_CLEANUP
MESSAGES
Table[initial]
SY-XFORM
HRXSS_PER_CLEANUP
455555545544444552222222222222
82833F052F3C51E500000000000000
000000000000000000000000000000
000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
XSS_ADAPTER2
F0000000
F0000000
No. 3 Ty. FORM
Name HRXSS_PER_CLEANUP
SYST-REPID
SAPLHRXSS_PER_MAC
5454455555545544422222222222222222222222
310C82833F052FD1300000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_%_MESSAGES
Table[initial]
No. 2 Ty. FORM
Name REMOTE_FUNCTION_CALL
%_DUMMY$$
2222
0000
0000
0000
SY-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SYST-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
HEADER
000000000000
000000000000
TYPE
3
0000
3000
SY-XPROG
SAPLHRXSS_PER_MAC
5454455555545544422222222222222222222222
310C82833F052FD1300000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RC
0
0000
0000
SY-XFORM
HRXSS_PER_CLEANUP
455555545544444552222222222222
82833F052F3C51E500000000000000
000000000000000000000000000000
000000000000000000000000000000
%_SPACE
2
0
0
0
No. 1 Ty. MODULE (PBO)
Name %_RFC_START
%_PRINT
000 0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RFCTYPE_INTERNAL
3
0000
3000
Internal notes
The termination was triggered in function "method_call_iref"
of the SAP kernel, in line 2203 of the module
"//bas/700_REL/src/krn/runt/abmethod.c#7".
The internal operation just processed is "METH".
Internal mode was started at 20070627095455.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=24080)
When : 6/27/2007 9:54:55.565
Threads : 2
Computer Name : PTGSAP10
User Name : SAPServiceEC6
Number of Processors: 2
Processor Type: x86 Family 6 Model 11 Stepping 1
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 6cd0
eax=000a7358 ebx=00000464 ecx=00000248 edx=00000000 esi=00000464 edi=00000000
eip=7c82ed54 esp=0549c640 ebp=0549c6b0 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:0549c640=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:27f2ac53=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0549c6b0 77e6ba12 00000464 0001d4c0 00000000 0549c6e8 ntdll!KiFastSystemCallRet
0549c6c4 0101f939 00000464 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
0549c6e8 005641c2 005641fb 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess [ntstcdbg.c (501)]
0549c6ec 005641fb 7c38b5c8 7c38b5c8 7c38b5c8 01d87888 disp+work!NTStack [dptstack.c (1367)]
0549c708 0056422f 7c38b5c8 00000000 0085f2b9 7c38b5c8 disp+work!CTrcStack2 [dptstack.c (352)]
0549c714 0085f2b9 7c38b5c8 00000000 005f0059 00300030 disp+work!CTrcStack [dptstack.c (182)]
0549c738 008626fb 3ccf0c10 00008006 00000000 00660bd8 disp+work!rabax_CStackSave [abrabax.c (7020)
0549cfe0 0067f9fc 01285324 012852e4 0000089b 2054de20 disp+work!ab_rabax [abrabax.c (1243)]
0549d010 006914a8 00000003 3cda5308 00000000 0549d078 disp+work!method_call_iref [abmethod.c (2203
0549d078 007c8d1e 00000000 3cda5308 0549d1c4 3cda67e8 disp+work!ab_extri [abextri.c (552)]
0549d08c 008433d6 00000000 3cda6768 0059fdb0 3cda64b4 disp+work!ab_xevent [abrunt1.c (281)]
0549d098 0059fdb0 3cda64b4 00000008 3cda6768 00000000 disp+work!ab_dstep [abdynpro.c (491)]
0549d1c4 005a2ae2 3cda5308 3cda5308 0549fd04 005a2654 disp+work!dynpmcal [dymainstp.c (2394)]
0549d1d4 005a2654 3cda5308 3cda5308 00000003 0549fd04 disp+work!dynppbo0 [dymainstp.c (542)]
0549d1f0 00577116 3cda5308 00000004 00000000 0000001a disp+work!dynprctl [dymainstp.c (359)]
0549fd04 004741c6 0000001a 00000001 00000001 0049792f disp+work!dynpen00 [dymain.c (1464)]
0549fd14 0049792f 00000004 00000000 00000003 00000002 disp+work!Thdynpen00 [thxxhead.c (4683)]
0549fee0 00497ead 00000001 00000000 00000000 00430000 disp+work!TskhLoop [thxxhead.c (4395)]
0549ff00 004214f1 00000000 00000000 7ffd5000 0549ff60 disp+work!ThStart [thxxhead.c (1153)]
0549ff14 00401080 00000003 056368d8 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1119)]
0549ff60 011bf720 00000003 056368d8 056378c8 01c05000 disp+work!nlsui_main [thxxanf.c (82)]
0549ffc0 77e523cd 00000000 00000000 7ffd5000 80938fd6 disp+work!wmainCRTStartup [crtexe.c (395)]
0549fff0 00000000 011bf5dd 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 6408
eax=00000001 ebx=00000103 ecx=0770fee8 edx=7c82ed54 esi=00000000 edi=00000000
eip=7c82ed54 esp=0770fec0 ebp=0770ff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:0770fec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:2a19e4d3=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0770ff04 0110e0b7 000006e0 00000000 00000000 059ca9d8 ntdll!KiFastSystemCallRet
0770ff84 7c349565 00000000 00000000 00000000 0563a508 disp+work!SigIMsgFunc [signt.c (594)]
0770ffb8 77e66063 0563a508 00000000 00000000 0563a508 MSVCR71!endthreadex
0770ffec 00000000 7c3494f6 0563a508 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index Typ Program Group Date Time Size Lang.
0 Prg SAPMSSY1 0 11.04.2005 09:27:15 21504 E
1 Prg SAPLHRXSS_SER_AUTHORITHY_CHECK 1 13.02.2005 19:00:30 16384 E
2 Prg SAPLASTAT_TRIG 2 09.09.2004 14:18:33 13312 E
3 Typ ASTAT_TYP2 0 10.11.1998 05:35:18 2048
4 Typ ASTAT_TYP1 0 30.11.1998 15:54:16 2048
5 Prg SAPLSAUTHTRACE 5 07.03.2005 08:51:05 57344 E
6 Typ USOBHASH 0 02.07.2003 13:15:24 3072
7 Prg SAPLSECH 7 05.07.2005 13:10:18 26624 E
8 Typ CVERS 0 09.11.2000 14:05:49 2048
9 Prg SAPLHRXSS_PER_MAC 9 10.02.2004 14:21:15 49152 E
10 Prg CX_SY_REF_IS_INITIAL==========CP 10 05.07.2005 13:10:16 10240 E
11 Typ SCX_SRCPOS 0 18.05.2004 14:07:11 2048
12 Prg CX_DYNAMIC_CHECK==============CP 12 05.07.2005 13:10:16 10240 E
13 Prg CX_ROOT=======================CP 13 05.07.2005 13:10:16 11264 E
14 Prg CX_NO_CHECK===================CP 14 05.07.2005 13:10:16 10240 E
15 Prg CX_SY_NO_HANDLER==============CP 15 05.07.2005 13:10:16 10240 E
16 Typ SYST 0 09.09.2004 14:18:12 31744
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPMSSY1
SYST . . : : 00004612
\0\0\0\0\x000D\0\x000F\0\0\0\0\0\0\0\0\0\0\0\0\0\x001E\0\0
ABAP Control Blocks (CONT)
Index Name Fl PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 PAR6 Source Code Line
246 FUNC 03 0020 LHRXSS_PER_MACU03 1
247 PAR2 02 0000 001B C000 LHRXSS_PER_MACU03 1
249 FUNC 13 0003 LHRXSS_PER_MACU03 1
250 PAR2 01 0000 0011 C001 LHRXSS_PER_MACU03 1
252 FUNC FF 0000 LHRXSS_PER_MACU03 1
253 ENDF 00 0000 LHRXSS_PER_MACU03 1
254 -
00 0000 LHRXSS_PER_MACU03 1
255 STCK 02 C001 LHRXSS_PER_MACU03 1
256 CPOP 00 0000 LHRXSS_PER_MACU03 1
257 -
00 0000 LHRXSS_PER_MACU03 1
258 FUNP 3E 0000 0011 8000 0000 8000 0000 0000 LHRXSS_PER_MACU04 1
262 FUNP 80 0000 0000 0000 0000 0000 0000 0000 LHRXSS_PER_MACU04 1
>>>>> METH 03 0000 0000 8006 0000 0000 0000 0000 LHRXSS_PER_MACU04 13
270 PAR2 00 0000 0001 0000 LHRXSS_PER_MACU04 13
272 CMPS 20 024B 001B 001B LHRXSS_PER_MACU04 17
274 BRAF 05 0007 LHRXSS_PER_MACU04 17
275 METH 03 0000 0001 8006 0000 0000 0000 0000 LHRXSS_PER_MACU04 18
279 PAR2 00 0000 0001 0000 LHRXSS_PER_MACU04 18
281 FUNE 00 0000 LHRXSS_PER_MACU04 21
282 -
00 0000 LHRXSS_PER_MACU04 21
Thanks and Regards,
Phanikumar -
Duplicate records found while loading master data(very urgent)
Hi all,
One infopackage in the process chain failed while laoding the master data(full update).Its showing the following error-->duplicate record found ..1 record used in /BI0/PTCTQUERY and the same record occured in /BI0/PTCTQUERY tables.
can anyone give me the solution...its very urgent...
Thanks & Regards,
ManjulaHi
You can see the check box in the Processing tab page. Make a tick mark for the check box Ignore Duplicate Data Records indicator . When multiple data records that have the same key are transferred, the last data record in the request is updated to BI. Any other data records in the request with the same key are ignored.
Help says that:
To maintain consistency, ignoring duplicate data records is only possible if the data is updated serially. A serial update is when data is first updated into the PSA then, after it has been successfully written to the PSA, it is updated into the master data or text tables of the InfoObject.
If a DataSource transfers potentially duplicate data records or if you manually set the Ignore Duplicate Data Records indicator, the PSA Only update type is automatically selected in the scheduler.
hope it clears ur doubt, otherwise let me know.
Regards
Kiran -
Very Very Urgent Issue: Restricted Key Figure does not return any data
Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any dataHi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW -
Copy Master Datas in FICo from 1 Company Code to Another --- Very Urgent
Hi Peers
I want to copy all the FI & CO master Data like G/L a/cs , Vendor Master, Customer Master, Cost Centers, Cost Elements, Commitment Items, Funds Center & Assets from one company code to another company code. Both the company codes will have same Chart of accounts. Is there any t.Code by which i can just extend these masters to my company code. Plz help. its very Urgent.
Expecting a reply ASAP.
Regards
RajaramHi
In customization, Assign Chart of A/cs to company code there u will get the path for copying one company code to another company GL Masters.
And also the CCtrs u already assign to the first company code. Once u copy the data for one company to another automatically it will copy to another company code.
Hope this is useful to u.
Shammi -
Its very urgent:How to insert data one table to another table
Hi all,
i am very new to oaf.
i have employee_number(per_all_people_f) lov is there.once select the employee number and click on the submit button
what ever select the employee number it ll move to new_operation_manager in custom table.
plz help me how to move.
its very urgent.
Thanks
Latha.
Edited by: Latha on Dec 21, 2011 9:33 PMHi Gyan,
Sorry, i will not repate.how to close the thread.
Gyan i have no knowledge on this issue.
plz help me.and where to mention,data is which table to insert.
plz send one sample code.
its very urgent gyan.
i wrote the am,co codes
in am:
public void NewoperationManagerLogic()
ManagerCustomTableVOImpl vo1=getManagerCustomTableVO1();----> here which vo take
OADBTransaction oadbt=getOADBTransaction();
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row=vo1.createRow();
vo1.insertRow(row);
in Co processrequest:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.invokeMethod("NewoperationManagerLogic");
in co processform request:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.getParameter("Submit")!=null)
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.getOADBTransaction().commit();
throw new OAException("Records Saved Sucessfully",OAException.INFORMATION);
thanks
latha
Edited by: Latha on Dec 22, 2011 1:26 AM -
Its very urgent:how to insert data into database tables
Hi All,
I am very new to oaf.
I have one requirement data insert into database tables.
here createPG having data that data insert into one custom table.
but i dont know how to insert data into database tables.
i wrote the code in am,co as follows.
in am i wrote the code:
public void NewoperationManagerLogic()
ManagerCustomTableVOImpl vo1=getManagerCustomTableVO1();
OADBTransaction oadbt=getOADBTransaction();
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row=vo1.createRow();
vo1.insertRow(row);
in createPG processrequest co:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.NewoperationManagerLogic();
process form request:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.getParameter("Submit")!=null)
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.getOADBTransaction().commit();
please help with an example(sample code).
its very urgent.
thanks in advance
Seshu
Edited by: its urgent on Dec 25, 2011 9:31 PMHi ,
1.)You must have to create a EO based on custom table and then VO based on this EO eventually to save the values in DB
2.) the row.setNewRowState(Row.STATUS_INITIALIZED); is used to set the the status of row as inialized ,this is must required.
3.) When u will create the VO based on EO the viewattributes will be created in VO which will be assigned to the fields to take care the db handling .
You must go thtough the lab excercise shipped with you Jdeveloper ,there is a example of Create Employee page ,that will solve your number of doubts.
Thanks
Pratap -
Vendor Master - Purchasing Data Uploading...very...very urgent.
Dear sapians,
Is there any tcode for uploading the vendor master purchasing data (only)? like FK15 and FK16 for uploading company code data and general data in Vendor master.
Please it is very urgent.....
Thanks to advance
Senthilhi
go for LSMW , there is no TCODE for uploading data .
regards
ravikant dewangan -
SQL Loader Oracle 10g problem in upload date with time data -- Very urgent.
Hi
I am trying to upload data using SQL loader. There are three columns in the table
defined as DATE. When I tried upload a data like this '2007-02-15 15:10:20', it is not loading time part. The date stored as 02/15/2008' only. There is not time on that. I tried with many different format nothing work. Can please help me ?
I have also tried with to_date --> to_timestamp it did not work.
The application is going to be in production, I cannot change DATE to TIME STAMP. This is very urgent.
LASTWRITTEN "decode(:LASTWRITTEN,'null',Null, to_date(:LASTWRITTEN,'YYYY-MM-DD HH24:Mi:SS'))",
CREATEDON "decode(:CREATEDON,'null',Null, to_date(:CREATEDON,'YYYY-MM-DD HH24:Mi:SS'))",
LASTUPDATEDON(21) "decode(:LASTUPDATEDON,'null',Null, to_date(:LASTUPDATEDON(21),'DD/MM/YYYY HH24:MI:SS'))"Your problem is most likely in decode - the return type in your expression will be character based on first search value ('null'), so it will be implicitly converted to character and then again implicitly converted to date by loading into date column. At some of this conversions you probably are loosing your time part. You can try instead use cast:
SQL> desc t
Name Null? Type
LASTWRITTEN DATE
CREATEDON DATE
LASTUPDATEDON DATE
SQL> select * from t;
no rows selected
SQL> !cat t.ctl
LOAD DATA
INFILE *
INTO TABLE T
TRUNCATE
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
LASTWRITTEN
"decode(:LASTWRITTEN,'null',cast(Null as date),
to_date(:LASTWRITTEN,'YYYY-MM-DD HH24:MI:SS'))",
CREATEDON
"decode(:CREATEDON,'null',cast(Null as date),
to_date(:CREATEDON,'YYYY-MM-DD HH24:MI:SS'))",
LASTUPDATEDON
"decode(:LASTUPDATEDON,'null',cast(Null as date),
to_date(:LASTUPDATEDON,'DD/MM/YYYY HH24:MI:SS'))"
BEGINDATA
2007-02-15 15:10:20,null,null
null,2007-02-15 15:10:20,null
null,null,15/02/2007 15:10:20
SQL> !sqlldr userid=scott/tiger control=t.ctl log=t.log
SQL*Loader: Release 10.2.0.3.0 - Production on Fri Feb 29 00:20:07 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 3
SQL> select * from t;
LASTWRITTEN CREATEDON LASTUPDATEDON
15.02.2007 15:10:20
15.02.2007 15:10:20
15.02.2007 15:10:20Best regards
Maxim
Maybe you are looking for
-
How to create a new BPEL Domain
Hi, Need a huge favor... thanks in advance.. Database - 10.2.0.2.0 BPEL (SOA Suite) -- 10.1.3.0 a) Installation went fine b) Able to use the software using the url provided at the end of installtion c) I want to create a NEW BPEL domain. When I creat
-
Hi Forum, can anybody help me installing typo3 on an intel mac, 10.4.10. I used xampp, personal websharing activated, apache couldn't start. How can I set permission locally to typo3. thx for your tipps cha64 macbook Mac OS X (10.4.10)
-
1) What are different types of cloning ? Why to use cloning and in which situation.. plz give example 2) What is difference between synchronization & serialization? How to do this in java ? Why it is needed ? Where to be used. Give example
-
Reading data from an UIBB reused in multiple tabs in OIF
Hello experts, I've an application using OIF, with three tabs. A specific UIBB needs to be embedded in all three tabs. The UIBB has an input field, which has to be filled by the user. Now, I need to read all three different instances of this UIBB fie
-
WS addressing inside OSB Message Flow
Hi There, We are trying to work with the ws-addressing structure inside the Message Flow of a Proxy Service, but i don't know how to define in the wsdl to see the structure of the ws-addresing in the Header, i need to see it to obtain some values in