Mechanics of replacing the x64 cartridge in a deskjet2542

Just point me toward the black cartridge; I don't recognize the item in this new-to-me printer.

Hi @DaharanSA,
Welcome to the HP Forums!
I understand that you are wondering how to replace your ink cartridges in your HP Deskjet 2542. I am happy to help!
Please take a look through this guide. Replacing the Cartridges. There is also a video included, if you prefer!
Hope this helps, and have a wonderful day!  
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

  • I just replaced the black cartridge in my HP 6980 Printer, yet it still shows the cartridge missing

    I just replaced the black cartridge in my HP 6980 Printer, yet it still shows the cartridge missing message. I have restarted the computer as well as uploaded any new updates. What is going on??

    Hi - Follow the steps in this doc, to clean both the cartridge contacts.  I'd also recommend very gently cleaning the contacts in the carriage as well.  Make sure the power cord is disconnected from the printer when cleaning the cartridges and the carriage.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • My hp 7160 wants to print in black only after replacing the yellow cartridge. Any suggestions?

    My hp 7160 wants to print in black only after replacing the yellow cartridge. Ink level shows full amount. Test page prints fine.
    I have tried different programs to color print in, all return the same error message.

    Hi @obxgirl,
    Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
    I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
    I hope to hear from you soon.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Can I use the black ink cartridge only, & quit replacing the color cartridge when it's empty?

    I have an HP Officejet 6210 all in one printer that takes color ink (#95) and black ink (#94).   I only want to print in black and white.   The color cartridges are more expensive and since I don't want to use them, I don't want to replace it.  Can I have the printer bypass the color cartridge (and the notifications that come with an emply cartridge) so it will allow me to use the black cartridge (#94) only and let the #95 sit there empty?  (ie it tries to print from there and I get the blank sheets...want to default it to the black ink cartridge 100% of time.)  I waste too much money on ink and wish to use the cheaper cartridge (#94) always.   

    Can't agree more. HP's strategy of getting more sells of its cartrige is notorious. It really drives consumers away. I am ditching my HP printer and getting a Brother instead.

  • Office Jet 6500 E710n-z won't print black even just replace the ink cartridge with a new one.

    It is the 3rd time to have problem on printing "black" even the ink is not empty (but the level is low, like a quarter left).  In the previous cases, I replaced the cartridge and the problem solved.  
    The 2nd time was last week.  After I changed the cartridge, it worked (for only 1 week) and the problem is back.  Since the ink is full this time and it worked well when I just changed it, I suspect this is the problem of my printer instead of the cartridge.
    I did clean printhead and align printhead but the problem persist.  Please advice the solution.  Thanks!
    This question was solved.
    View Solution.

    Hopefully the printhead does not need replacing. I would look at this document on defective output for your printer model.  I know that some of the steps in here you have mentioned already performing. Please just read over/skip those and try the ones you have not yet performed.  It shows different ways to clean the printhead; if you just did the cleaning from the toolbox I would defiantly do the manual one. It also has a walk through to make sure that the products firmware is up to date.  Here is that link:  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02455482&tmp_task=solveCategory&cc=us&dlc=en&la...
    I hope this helps.
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • I replaced the black cartridge on my cannon 2100. Now it will not print black ink. Please help.

    I have replaced my black in cartridge and now my printer will not print black.  I am getting the message E16.  I cannot preform any of the maintenance tasks as it keeps giving me this message.  Please help.

    Hi @chicagoburb, 
    Welcome to the HP Forums!
    I noticed that your HP Photosmart 310 will not print with your replacement ink cartridge. I am sorry to hear this, but happy to help!
    Please see this guide, Fixing Print Quality Problems for the HP Photosmart Premium e-All-in-One Printer Series (C310).
    If the guide does not resolve your issue, please see this post, Re: black ink not working, by @Bob_Headrick.
    Otherwise, please call our phone support at 800-474-6836 for your upgrade options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. 
    Hope this helps, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • After replacing black ink cartridge on photo smart 6500 won't print black

    Photosmart 6500 all in one printer won't print after replacing the black cartridge. Everything worked fine prior. 

    elsob wrote:
    It's photosmart 6510 & I 'm from the US.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Printing using the black cartridge only!!

    No matter what settings I use, i.e., greyscale/black cartridge only, the printer continues to use ink from the other cartridges.  I want to use only the black ink cartridge except on the rare occasion I print in color.  Any idea?

    tiredofinkscams wrote:
    Thanks for the reply.  I have the printer set to "fast draft" on everything, and always use the "greyscale"  and "black cartridge only".  I also never print webpages.  The colored ink cartridges still gradually empty.  Granted the are much slower at emptying than the black, but I want the option of NOT using and having to replace the color cartridges.  I have been tweaking this for some time and I still believe the color cartridges are being used.  Please tell me that that is not intentional on HP's part!
    What printer model do you have?  Inkjet printers (from any manufacturer and any model) will use some ink to keep the nozzles unclogged, even if not printing with color for example.  Models with separate ink supplies and printheads will tend to use more ink for servicing than models with the printheads built into the ink supply.  For models with integrated printheads many printers will allow printing with an empty color cartrdige or a color cartrdige that has been removed completely.
    Regards,
    Bob Headrick, Microsoft MVP Printing/Imaging 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I have a PC, Windows 7 x64. I installed a plug-in in Elements 13. I tried to installed another plug-in. It replaced the first plug-in . Can't I have more than one plug-in at a time??? If so, how?

    I have a PC with Windows 7 x64. I have Elements 13. I installed a plug-in (Topaz) which appeared under the Filter Menu.
    Then I tried to install my new Canon Printer software plug-in which put it under FILE > AUTOMATION TOOLS. However, when I tried to use TOPAZ under the FILTER MENU it was gone. In other words, the Canon printer plug-in replaced my Topaz plug-in. When I reinstalled the Topaz plug-in, it replaced the Canon Printer Plug-in.
    QUESTION: Can't I have more than one plug-in installed in Photoshop Elements 13 at a time? So that the Canon printer plug-in is in AUTOMATION TOOLS, and the Topaz plug-in is under the FILTER menu?

    Have a look at this thread.
    http://discussions.apple.com/message.jspa?messageID=2369954#2369954
    Before you try some of the suggestions bear in mind that your iPod is still under warranty.

  • I received a low ink warning on my mac for my epson artisan 837 printer. I replaced the cartridge that was low but it still reads low ink on the mac but reads full on the epson control panel. I am also receiving a communication error between the mac

    I received a low ink warning on my mac for my epson artisan 837 printer. I replaced the cartridge that was low but it still reads low ink on the mac but reads full on the epson control panel. I am also receiving a communication error between the mac

    What exactly is the error?
    And, we'd need some info re. your Mac model and OS version - you are not running iOS on it.
    You need to realize that this model has been discontinued and the last driver updates are dated about a year ago. If you are running Mavericks, there may not be an updated driver for it. But you can try to delete the printer and add it again to see if that will work.

  • Replace Empty Ink Cartridge message flashes after the cartridge has been replaced

    Printer is C61P50 All in One.
    Has been printing black only, but this morning it said it could not continue unless the empty Magenta cartridge was replaced.   I bought a new one, installed it, and still get the same message. 
    Occasionally I get another about the light blue cartridge ink being expired.   That I can clear by hitting OK, but then I am back to being hung up on the supposedly empty magenta which I have already replaced with a brand new one.

    Hello palang,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I am sorry to hear about the ink cartridge issue you are having with the Magenta. I have looked into this for you and suggest completing all of the steps in the troubleshooting guide below. I hope this helps resolve this for you!
    'Ink Cartridge is Missing, Incorrectly Installed, or Not Intended for Your Device' Error Message is ...
    Regards,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Black cartridge not recognizing when inserted the colour cartridge

    model: HP Deskjet 2515
    os: win 7(x64)
    recently I have replaced black cartridge(hp 678) and a message appears saying "ink cartridge failture-black".Although I unplugged and replugged the printer, problem exists.Then I removed colour cartridge from the printer and then only the black cartridge  detected.After re-inserting the colour cartridge the problem appears again.

    Hello TamilSelvam, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are running into print quality issues.  I would like to help.
    I would recommend removing your ink cartridges, and performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would then suggest utilizing the steps in this document on Troubleshooting Print-Quality Issues.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Hp color laserjet cp5225n and the magenta cartridge

    The HP Color laserjet CP5225dn was purchased in May of 2011 serial number is CNBCC2H2FW model CE712A.  The magenta cartridge still has 90% of life left only 1375 pages have been printed and when you print something in color you get a pink line at the bottom of the page, the line goes halfway across the page.  Please advise on how we can get this cartridge replaced at no charge.

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Why does the ink dry out so quickly in the 564 cartridges?

    I have a 7510 all in one. I just replaced the ink about a month ago. I pinted less than a dozen 4 x 6 pictures. I didn't print again till today - approximately a month. The ink is dry and I had to replace the magenta, blue, yellow and photo cartridges. When it works it works great. This is very disappointing. Our last color printer was an HP and it worked great till we replaced it. Is this a known problem and is there a solution?

    Hi,
    Please check the following information:
       http://www.hp.com/pageyield/au/en/PSC5300/index.html
    We normally can only get up to around 80% to 85% of those numbers or say 170 pages. Roughly 4 x 6 = 1/4 A4 sheet that measn we can print 170 x 4 = 680 pages 5% coverage or 34 to 50 of 4 x 6 with 100% coverage.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP 6310 all in one, the Print Cartridge Door Hinges are broken.

    I have 2 printers HP 6310 all in one with the same problem, the Print Cartridge Door Hinges are broken.
    Were can I buy the parts? is it too difficult to change them?
    Is it a HP repair services in my area?
    Is it any "recall" for this problem? I know same peobles with the same trouble
    I thank you for your help
    geny

    Hi geny,
    I understand the cartridge door latch has broken.
    I will be happy to help you.
    This is a older model so you might not be able to get that part replaced.
    I have provided the HP Parts Surfer. It doesn't look like a replaceable part.
    If you can get it to connect and tape the door shut so the printer recognizes the door is closed, you might still be able to still use the printer.
    Hope this helps.
    Thank you for posting on the HP Forums.
    Have a wonderful day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for