"media" and "watchers" default device folder is missing after install

Hi everyone,
I begin an installation of Final cut server and i meet an issue. At the end of the installation, Final cut server don’t create three default devices folders « library », « watchers », and « media ». Final cut server only create the « library » folder. Furthermore, Final cut server don’t create « default permission sets » during the install. I just have « admin » permission set.
I’m working on an Xserve 2 X 2,66 Ghz Quad-core intel Xeon, 12 Go 1066 Mhz RAM, with OSX server v 10.6.4 :
- First I install Final cut server v1.0. During this install, I choose « Video production » customer profile selection. Then, I set my « proxy media location » and my « Production media location » in a SAN device’s folder (Active RAID using Metasan). I choose the internal hard drive to install Final cut server software. Everything means Ok, Install succeeded
- I update to Final cut server v1.1, and I start my « Final cut server »
- Then, I upgrade to Final cut server v 1.5, Install succeeded.
- At the end, I update to Final cut server 1.5.2
Final cut server is working fine but there are something wrong compare to « setup and admin guide » :
- My « proxy media location » and my « Production media location » are in my internal hard drive, not in my SAN device’s folder like my settings during the first install.
- « watchers » and « media » default devices haven’t been created. I only have the « library » folder. Instead, if I set up manually all my « device folder », is it OK ? Is there any potential issue ?
- Final cut server don’t create « default permission sets » during the install. I just have « admin » permission set
If, someone could explain me what’s wrong in my install…. Thanks a lot
Best regards
Elka
Message was edited by: Elka75

Since you haven't added any content or customizations yet, I would just do a clean reinstall.
First uninstall everything. See "Best Practices for uninstalling Final Cut Server" at <http://support.apple.com/kb/ht1764>.
Then, install Final Cut Server 1.5 and update that to 1.5.2.
(Don't install 1.0, update to 1.1, and update to 1.5--there is no reason to if you have an empty database. If your 1.5 license is an upgrade license that's OK, it will install without any previous installations--it just asks you for the 1.0 license key to authenticate.)

Similar Messages

Libm.so.1 and other libraries, missing after install

I'm running into problems because libm.so.1 and some other libraries are missing after install.
- Solaris 8
- Not an LD_LIBRARY_PATH issue, I did a full FIND and it did not show up.
Any information as to why these libraries may have gone missing and what I might do to get around this problem would be appreciated.
Thanks,
-Ken

Cause: The installation which caused this symptomology was based on a boot from a downloaded ISO designated "Installation CD" (Solaris 8). Booting from, and installing based on this CD caused a incomplete installation, with many libraries missing.
Solution: Just by chance, on a re-installation attempt I booted from 'Software 1 of 2 CD" (Solaris 8). Installation based this boot yielded a complete installation - no libraries missing.
Thanks for the suggestions,
-Ken

HT4477 One complete family file missing after installing iPhoto 11 ??

One complete family file of photo's is missing after installing iPhoto 11. Installation went smoothly, and all other files complete. Have checked thru entire photo lists, including photo list at the top. Found two photo's in that should have been in that photo list that were downloaded 2 months prior to installing iPhoto 11. I keep files of each family branch on left side iPhoto window. Only the one file is missing. ????

I meant folder. Have 6 kids, and to keep track of each family quickly, I set up folders on left side of iPhoto. All others are there.

Zoom in and out is not working in folders after installing Lion OS

Zoom in and out is not working in folders after installing Lion OS. Did not understand why?

Feature has been removed AFAIK. As far as zoom is concerned, the new operating system has been..whatever the opposite of optimized is...pessimized?

I can't play "classic" and "best kids songs stories" apps offline after installed IOS7

I can't play "classic" and "best kids songs stories" apps offline after installed IOS7.

I googled "mac solitaire" and came up with several free results that should work. Solitaire XL looks decent.
As for running PPC apps, you're out of luck. You can try setting up a virtual machine of Snow Leopard, but that's a bit of work. You can force the app to redownload from the App Store by holding option while you click on your purchases tab, which will make the "install" button clickable.

Found "A required CD/DVD drive device driver is missing" when installing Window 7 64bit.

Hello,
I just bought X220i with Core i-3, ram 8G. When I tried to install Window 7 64bit (Coz of Ram 8G), I got the message “A required CD/DVD drive device driver is missing...”. I did browse the driver (using USB 3 Driver) but, it didn't work.
Any idea to resolve?
Thanks in advance.
Solved!
Go to Solution.

What media are you using to install win 7? USB DVD drive, flash drive, ??? Downloaded ISO or Lenovo or Microsoft DVD?
One reason (of many) you can get this error message is bad media - corrupt download, bad burn, defective flash or optical media. I've also heard of problems with USB ports causing this. If you're using USB media, have you tried another port?
And as NINE asked, when in the process do you get this error?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Playlists Missing After Install New Hard Drive and Upgrade to Win 7

My computer needed a new hard drive and I upgraded from Win Vista Home Premium to Windows 7 Home Premium.
I am trying to get my Playlists back for my iTunes in my "Administrator" user account, after reinstalling iTunes and putting my music libraries back onto my computer.
(I had installed 32-bit Win7 OS myself, computer worked OK for about 1 day, then would not boot up; I took computer to shop, they said I needed new Hard Drive, and I gave them my new Win7 OS computer disks)
I am confused over whether I have 32-bit OS or 64-bit OS. They recommended installing 32-bit OS, I agreed, and believed that I had 32-bit OS installed; however, Computer / System Properties state "System type: 64-bit Operating System"
Prior to my installing Win7, I backed up the following onto my Western Digital "My Passport Essential Portable Hard Drive:"
("My Administrative Account"): Users / Owner / My Music
and
("My User Account"): Users / Yank / My Music
My "Administrative" and "User" user accounts contain different songs in iTunes.
If helpful, I could describe what is in each of these 2 backed-up music folders.
To get started, I copied both my "Owner" and "Yank" user folders in the C: User folder; however now I have "Owner," "Yank," and "Yank.Owner-Toshiba" folders in the C: User folder. I think I did this by creating a new Yank user account by creating a new account, not by my copying a folder into C: User folder. The Owner folder has a picture of a lock on the folder icon.
Because I had trouble merging My Music folders in the Owner folder, and I was confused, I copied everything that was in the Owner folder into a new folder in the Owner folder, "NEW OWNER FOLDER." I also copied my Owner Music folder into several places in my Users / Owner folder.
I also ended up changing the "iTunes Media folder location" several times, using iTunes "Edit / Preferences / Advanced tab / change "iTunes Media folder location". When I chose "Reset," it shows "C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes\iTunes Media"
I've also played around with "Edit / Preferences / Advanced tab / 'Keep iTunes Media folder organized' "
When I open my iTunes, I have no playlists.
However, when I went to my "Yank" user account and opened iTunes for the first time, the playlists associated with that account were visible.
How do I get my playlists back on my Administrative Account, which is my main song collection and had many, many playlists?
Thank you.

YAY!
I didn't try shift-start of iTunes, but I DID GET MY PLAYLISTS BACK BY FOLLOWING YOUR OTHER ADVICE:
I went to my external hard drive, went to my backup at Users / Owner / My Music / iTunes / and searched for library.itl
Four files with that name were found, with different dates.
I chose the most recent, dated just a few days before I made my backup to the external hard drive.
I copied it to my computer's hard drive into the following location:
C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes
which overwrote the file which was located there.
When I opened iTunes, ALL MY WONDERFUL PLAYLISTS WERE THERE!
THANK YOU SO MUCH FOR SOLVING THIS FOR ME!
CAN YOU IMAGINE HOW DISAPPOINTED I FELT WHEN I BELIEVED THAT I HAD LOST ALL OF THE PLAYLISTS WHICH I HAD CREATED OVER THE YEARS? Many of my playlists were composed of whole albums whose songs I had added to iTunes.
THANK YOU AGAIN SO MUCH!

Time and Classifieds services missing after installing LabVIEW 8.0

Hi,
After installing LabVIEW 8.0 I noticed the Lookout Time and Classifieds services are missing. At first I thought it was just the Lookout lighthouse in the system tray which had disappeared but when checking in services.msc I can see that the services themselves are no longer there. The Citadel server is, however.
I am using Lookout Direct so please let me know if this question is more appropriate on the Automation Direct forums. I'm trying to change to a NI solution instead but every step is taking me considerable time.
Thanks,
Dave

Try to repair Lookout Direct from Windows Add/Remove Programs. The missing services should be reinstalled after repair.
Ryan Shi
National Instruments

Sound missing after installing windows 8.1 pro.

hi. i have a problem. after instaling windows 8.1 pro , sound is missing. i in device manager everything is fine. instaled every driver.
product name: laptop hp 620.
a day before this, i had windows 7 and everything worked fine. tried everything. i dont know what else to do. if i dont find a solution then i go back to windows 7 ((

Hi:
The only suggestion I can offer would be to try a W8.1 IDT audio driver...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp...

Icon missing after installed Adobe

Hello,
Does anyone have the mac icons missing issue after installed adobe creative cloud installer?
My macbook pro icons were missing (didn't show) right after I installed Adobe Creative Cloud Installer (download from Adobe website).
At first, I thought the issue is my machine, so I went to apple store genius bar and left my mac for a week to let them find out the reason.
Apple erased my system and reinstalled it, and machine passed all the diagnose test.
Yesterday, I got my mac at apple retail store and everything was normal (no icon missing).
Right after I installed Adobe Creative Cloud Installer, the icons were missing. Then, I uninstalled Adobe Creative Cloud Installer, everything was back to normal, including icons were back.
I have no idea how this happen and why. But according to apple, they told me it should be the software issue and ask adobe for help. Adobe there is no phone call support form Adobe.
Does anyone have the same issue like this, or does anyone know how to solve the issue?

Hi Jeff,
Thank you for your reply. Please see the screenshot.
This is when I try to create a folder, it happens like this.
The second one is after I close this folder and reopen it. Please the second image.
The last image is very funny which I am not able to see anything form applications folder. But, actually, there are a lot of things. As you can see from Dock, there are many things like imessage, Photoshop, chrome etc. They just not shown!
I can only uninstaller the Adobe Creative Cloud Installer to solve it.
Do you have any idea how to solve it by any chance? Apple said it was caused by the software. They even replaced my logic board to solve it, but they still couldn't.

App Store, Pages 5.0, Evernote, and other Apps will not fully function after installing Mavericks. What is the issue and how can this be solved?

Hello all, I could use some serious help on some major issues I have been having after installing Mavericks on my system (specs stated below). Never has a mac felt ever so rebelious and broken before in my lifelong period of using these systems. Anyway, after installing system 10.9, I had opened the mac App Store upon seeing that applications such as my iWork suite all had free updates. However, when I would attempt to navigate to the updates window, it would not respond to my various attempts. I then tried to get there by the system's menu bar and to my dismay, nothing would work when I clicked on it, not even the apple logo menu. I later quit the application using Command-Q and opened up the App Store by the apple menu option 'Software Update...' instead. Though it looked promising since the updates window did open, all update buttons or even '...more' info buttons were unresponsive. These same problems persisted even after restarting my computer. I had also attempted to see if repairing definitions would help by booting from the recovery start-disk and using disk utility but the repairs it carried out apparently had nothing to do with my issue. Finally, I was able to update to the new iWorks suite (which interestingly did not replace the iWorks '09 suite) by following the notification that asked about allowing automatic updates which I did.
Once trying to use Pages 5.0, I soon noticed that all I could do was merely type in a new document and change various options via key commands. Neither the inspector or top bar menus would respond to any place I click. Similarly, Evernote only starts up on the last used note and merely allows me to scroll through it. The top bar menus, the note select pane, and even clicking inside the note to input text are all not functioning and uninfluenced by any mouse clicks.
I have noticed other apps that will not respond to any sort of input, but I still have not explored all applications to know what the issues of each may be. However there are some applications that work such as Safari, Google Chrome, dolphin, iWork '09 including Pages '09, and others.
I do hope that I can avoid rolling back my system, but in the meantime, it has been quite the obticle course to use my computer for all of my school purposes.
Any help is very much appreciated,
Thank you!
DT
MacBook Pro 13-inch, Mid 2009
Processor 2.26 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

Gallery blur missing after installing 2014

missing gallery blur after installing 2014 ps.

Sorry,
It was slated to go to the Creative Cloud - Muse area. How it got to Photoshop is beyond me.
Bob

Javac missing after install on RedHat 8

Hello,
I'm trying to install j2sdk-1_4_2_11-linux-i586-rpm.bin on our Red Hat server. I followed the instructions and it seems as if the RPM does install. However when I change into the directory /TheInstallDir/linux/java/jre1.4.2/bin there is no javac executable.
What did I do wrong? How do I get the Java compiler?

jre1.4/bin don't hava javac becaus it provides runtime environment and only hava 'java'
look javac in TheInstallDir/linux/java/bin/
I hope this will solve your problem
Regards

Facebook on iPhone 4S and iPad 2 hang all the time after installing ios6. If anyone know how to fix it pls let me know. Thx

Facebook on iPhone 4S and iPad 2 freeze and go to home screen after installing ios 6? Anyone know how to fix it pls pls let me know. Thx

Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao.

Mountain Lion is missing, after installing an external hard drive and Carbon Copy Clone.

I have a mid-2007 desktop iMac Model MA877LL, 2.4 ghz/1gb/320gb, with 4 GB memory, upgraded to Mountain Lion 9/7/2012 at an Apple store (now 10.8.5). I just installed a new external hard drive Fantom Drive 1T G-Force Mega Disk Firewire 800, then installed Carbon Copy Clone successfully. However, I could not get the clone to boot from the backup volume. Mountain Lion showed in both Macintosh HD and External Hard Drive at that point. After working through many steps with CCC, trying to get it to boot, the final suggestion was to try installing Mountain Lion onto the backup disk via the Mac App Store Installer. As my Mountain Lion was installed at an Apple store, there's no record of it on line and I can't find an installer, although I've been doing updates as they're issued. Per article, "OS X: Installing OS X on an external volume", I erased and reformatted the storage device. Now, checking my Macintosh HD, Mountain Lion is gone. How do I get it back?

Woodswalker wrote:
...Per article, "OS X: Installing OS X on an external volume", I erased and reformatted the storage device. Now, checking my Macintosh HD, Mountain Lion is gone. How do I get it back?
Are you saying that your internal HD doesn't have an operating system on it either, meaning you can't boot your iMac at all? Or that the external was also named "Macintosh HD" in which case, having been erased and reformatted (hopefully with a GUID partition table), you'll need to clone your internal to it once again.

"media" and "watchers" default device folder is missing after install

Similar Messages

Maybe you are looking for