Media Browser and iTunes Screensaver Unable to See Through Aliases

My iTunes library is on a shared Airport disk. In Tiger I used an alias from ~/Music to the shared library. This worked better than pointing iTunes itself straight at the shared library because the media browser and iTunes screen saver continued to work as expected.
Not so in Leopard. When my iTunes library is an alias the media browser refuses to see it and suggests i launch iTunes 6 or later. Similar for the iTunes screen saver.
Does anyone else experience this, and does anyone know any workarounds? I miss browsing my iTunes libray from iPhoto.

docjj
If you have 64 bit Windows and daemon, you have a little work to do.
You need to install the 64 bit Gear drivers that iTunes needs for burning but are not supplied:
http://www.gearsoftware.com/support/drivers.cfm
For advice on Deamon, see this:
http://gearsoftware.com/wiki/index.php?title=SPTD_Drivers
You may also run into a problem with your CD configuration folder, if you do see this thread:
http://discussions.apple.com/thread.jspa?messageID=5324081&#5324081

Similar Messages

Under SHARE, IDVD is grey, what step am I missing? Only MEDIA BROWSER and ITUNES is active?

I'm unable to SHARE my IMOVE since IDVD is grey and not active, only MEDIA BROWSER and ITUNES. I'm using ITUNES '11.

Hi
A. I don't know
B. I think that THERE ARE A MUCH better choice to do - ! ! !
As Share to Media Browser is OK
(I NEVER use Share to iDVD from within any iMovie versions as the result will be bad to even worse)
Use this and Share as LARGE (Not HD - also degrading result)
Now Close iMovie and Open iDVD and Import movie from Media Browser - This will result in as Good result possibly when movie comes from iMovie'08 or 09 or 11.
If You want even better result then use
• iMovie up to HD6 - or -
• FinalCut any version
So that the material exported over to iDVD is fully interlaced - as DVDs are so and as SD-Video quality is so as Standard. (There are no HD-DVD quality (but academic - very rare and needs special players))
Yours Bengt W

The very top of my 13" macbook pro screen, above the browser or application frame, goes black sometimes and I'm unable to see the choices

the very top of my 13" macbook pro screen, above the browser or application frame, goes black sometimes and I'm unable to see the choices, any ideas?

Back up all data.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
defaults delete -g NSFullScreenDarkMenu
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V.
Wait for a new line ending in a dollar sign (“$”) to appear. You can then quit Terminal. Log out and log back in.

I shared my imovie in media browser and the project disappeared from my computer...any ideas of where it might be? I've searched everything.

I created a 30 min video in imovie and then clicked share in media browser....
I went to go find it and the raw footage is in imovie, but the project is GONE.
Nowhere to be found, not idvd not imovie, only some crypric .
I can't even find media browser on my computer even though when I go to
download media browser, my computer tells me I already have it!!!
Where oh where has my imovie gone?
thanks in advance,
trinity
http://www.zenyourbusiness.com

What do you mean by raw footage when you say "I went to go find it and the raw footage is in imovie, but the project is GONE." Can you open your working movie in IMovie Edit Project window? Does it show to the left of the file name in the Project library or Share/Media Browser drop-down box that it has processed the movie?
my processed movies are listed in the iMovie Projects folder as Movies/iMovie Projects.localized. Using this file, the drag and drop worked for me so I was able to burn the movie on iDVD. However, shared iMovie projects are still not recognized by iDVD. An old project has disappeared and the new one does not appear in iDVD in the Media pane as it should. I checked the preferences, and directed it to look in the iMovies Project folder. I am currently sharing with iTunes and when I open IDVD the medium shared movie is there as should be. Hummm. Why not the large shared movies showing in IDVD?
You probably have tried several things already but: open your "more info" box for the movie file if you can, and there the extension shows .rcproject and make sure you are checked to open with iMovie.
Check your iDVD preferences. Make sure it is looking in the right place for your movie files. It automatically checks in "Movie" folder but you can also ADD by directing it to your iMovie Project file specifically. You could go into your Home Library and dump your preferences then reopen IMovie and see if it helps (don't trash your preference until you reopen IMovie and see it is working okay) but this did nothing to help me.
In iMovie, try removing your movie from Media Browser and reprocessing it. You might send it to iTunes and see if it shows correctly there.
I will keep at this as there appears to be a bug with the processing of large movies and IDVD recognizing them as previously. It is just not finding shared movies.
Pat

Feature Request: Standard Keyboard Navigation in Media Browser and Project Panel

It's been a while since I've had time to submit a feature request. I've wanted to see this one for a while. If you agree, please submit your own feature request here: http://www.adobe.com/go/wish/
System Navigational Keyboard Shortcuts in Media Browser and Project Panel
Windows (and I'm sure Mac) has a standard set of keyboard and mouse navigational shortcuts for keyboard and mouse. I'm so used to using them in daily browsing (both in Windows Explorer and in any web browser) that missing them in the PPr Media Browser, or getting a different result in the Project Panel, is still very jarring and slows my workflow (even after having used Premiere Pro [again] since version CS4).
I propose that the Media Browser and Project Panel should honor the OS defaults for keyboard and mouse folder/file navigation. A few of the standard (Windows) keyboard and mouse navigational shortcuts are listed below (listed in order of most helpful to my own work):
Moust Back Button = "BACK"
ALT + LEFT ARROW = "BACK"
UP, DOWN, LEFT, RIGHT = steps through the various folders within the view.
UP, DOWN walks through the directory tree while RIGHT expands the currently selected folder and LEFT contracts that directory (twirl down, etc).
ENTER opens a folder.
ALT + UP = "Folder Above"
ALT + RIGHT ARROW = "FORWARD"
F2 Renames a folder
ENTER "takes" that name to the clip. (current functionality used ENTER to rename a file/folder).
ESC cancels the renaming operation.
Pressing Enter on any piece of Media or Title, etc should take an "expected" action acording to it's context. (i.e. ENTER on a video clip would load it inot the Source Monitor. ENTER on a Title would open it in the Title Editor. ENTER on a folder would take us into that folder).
These functions exist in both Windows Explorer as well as most modern Web browsers. When browsing files and Project folders, it's what I've come to expect. It's muscle memory, if not intuitive. I realize that many of these keyboard commands are already in use in other windows/panels of the application, therefore, these commands should be Panel-specific (i.e. ALT+LEFT works differently in the Media Browser and Project Panel than it does on the Timeline/Sequence). And as always, when making such changes (i.e. changing the behavior of ENTER to F2), this set of keys should be highly configurable based on preference:
Preference:
checkbox: Use OS-specific navigational keyboard and mouse commands in Media Browser and Project Panel
checkbox: Use the (very few) "classic" Adobe keyboard commands in the Media Browser and Project Panel
The most common habit I find myself doing in the Media Browser is clicking the BACK button on my mouse—only to realize, yet again, it doesn't work that way in PPr.
The most common habit I find myself doing in the Project Panel is pressing F2 to rename a folder/bin. Of course that doesn't work. And when I've renamed it, I press ENTER to save the name, but that only moves me to the next folder ready to rename it, too. I also find, out of habit, I try to navigate the bins using the arrow keys and then open the bin/folder using ENTER. Instead, my bin is asking for a new name and I hit ESC to avoid renaming it—now THERE's a shortcut that works the way it should.
I realize this feature may be controversial to some, since it's not the way we're used to doing things in PPr. However, I'm sure there are just as many out there, like me, who are confounded as to why PPr has never worked with the "conventional" navigation shortcuts found throughout the rest of the operating system, be it Windows or Mac.
If you agree with this feature request, please submit your own feature request here: http://www.adobe.com/go/wish/

Nice ideas Jeff.
There is a site - Flash Catalyst Wishlist/Ideas where you can post these ideas so that the community can vote on them.

Media Browser to iTunes

I know how to transfer a movie from iMovie to the Media Browser, but how do I then transfer the movie from the Media Browser to iTunes for adding to the movies collection on my iPhone?

TerrySteven wrote:
.. but how do I then transfer the movie from the Media Browser to iTunes for adding to the movies collection on my iPhone?
you don't share via Media Browser to iTunes..
there's a separate 'Share/iTunes'-feature in iMovie..
and Welcome, TerrySteven, to the  iMovie boards..

IMove 09 just keeps crashing when I try to share it in Media Browser or iTunes etc

Can anyone help ?
iMove 09 just keeps crashing when I try to share it in Media Browser or iTunes or iDVD.
I have plenty of space on my HD
Model Name:          iMac
Model Identifier:          iMac10,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Thank you
Les

Locate and move the com.apple.iMovie.plist and com.apple.iMovieApp.plist.lockfile files to the Desktop, launch iMovie and try again. If that corrects the problem you can delete them from the Desktop.
They will be in your Home/User/Library/Preference folder.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
OT

How do I find music that has been uploaded to iTunes from a purchased CD and iTunes is "unable to find the original file?" I no longer have the CD. I have tried all the usual methods of looking in my iTunes library and through Find. No Luck.

How do I find music that has been uploaded to iTunes from a purchased CD and iTunes is “unable to find the original file?” I no longer have the CD. I have tried all the usual methods of looking in my iTunes library and through Find. No Luck.

Backup drive?
Subscribe to iTunes Match?
If neither of the above and you don't have the CD and can't find your tracks on the computer then they you're stuck. A file recovery utility will cost $100, plus another $100 for an external drive to which to resue the files, and may not even work. You can buy a lot of CDs for $200.

I created a iMovie with photos, music and titles; shared it with the media browser and burned it on a DVD RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

I created an iMovie with photos, music and titles; shared it with the media browser and burned it on a DV+RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

Probably because they don't accept that media.
Try using Verbatim DVD+DL (if your project exceeds 2 hours) or Verbatim DVD-R if it doesn't.

Hi, im trying to burn my imovie project to a dvd. i went to share it to idvd and there was no option to do so. instead i shared it to quicktime and the project didnt show up when i tried to open it in idvd. i also tried sharing it to media browser and it

Hi, I'm trying to burn my Imovie project to a dvd. I went to share it to iDvd and there was no option to do so. Instead I shared it to quicktime and the project didnt show up when i tried to open it in iDvd. I also tried sharing it to media browser and it didnt show up either. Please help me!

While we all have MacBooks in this forum not all of us use iMovie. There's a iMovie Support Community where everybody uses iMovie. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/ilife/imovie

ITunes missing from Media Browser -- "open itunes to populate list"

I am on a MacBook Pro 10.7.3 running GarageBand '11 6.0.4 and all of the sudden no tracks will display under Audio in the Media Browser (Photos and Movies still appear). No tracks from either iTunes or GB show up. This is confusing as I have been using GB to make podcast/music mixes for more than 5 years and I haven't changed any settings or done anything different, but now I get the message "open itunes to populate list" or "To see GB songs here, open GB to edit and save your music."
Also, for quite some time I have been unable to go the alternative route of dragging tracks directly from iTunes and dropping them on to the timeline in GB -- that used to work, but mysteriously stopped, so I am dependent on the Media Browser for importing music.
I read thru the forums and tried the advice given to someone this was happening to in Final Cut -- recreating iTunes .xml file. Did that, still no tracks display.
Other advice says to reinstall GB or iLife altogether -- I hope to avoid this, but if I need to go this route, how do I reinstall GB w/o a disk? Can I do it through App Store and will it recognize that I have already purchased it?
I am dying to be able to get back in to my music mix making in GB, so thanks in advance.

moontroll wrote:
unable to go the alternative route of dragging tracks directly from iTunes {...} I am dependent on the Media Browser for importing music.
another way:
http://www.bulletsandbones.com/GB/GBFAQ.html#importfromitunes
(Let the page FULLY load. The link to your answer is at the top of your screen)
moontroll wrote:
how do I reinstall GB w/o a disk?
you can't, you'd need to find the DVD
moontroll wrote:
Can I do it through App Store and will it recognize that I have already purchased it?
no, it'll only recognize your purchase if it was through the app store

Apple TV and iTunes not able to see each other

I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.

Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
"I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
Good luck.

Aperture previews not showing up in media browser (and iweb)

some of my images in aperture projects do not show up in iweb or in the media browser at all....the projects are listed and most other project show all images, but some don't....
i tried several things including consistency check and rebuilding the entire library....nothing works....
this is very annoying...one of the few reasons (but a major one for me) to stick with aperture over LR is the system wide integration....but it has to work....

thanks for that info....i actually managed to fix it by rebuilding my previews.....but there was no reason at all for the previews not to show up....and it actually took 2 times to rebuild them all....some still did not show up after the first run....
i really hope we will see an upgrade soon....some things just have to be smoothed out....and a few added....

IPhoto. Media Browser and Photobooth.

Good afternoon.
Some students at our school find that the Media Browser will not display thumbnails of their Photobooth images. This happens in all the 'iApps' that use the Media Browser.
I can't see any differences between the configurations of directories and preferences for students who can use the Media Browser successfully and those who can't. We would appreciate any help.
Thanks in advance.
Brian Bowell
ICT Support.

Brian
the Media Browser will not display thumbnails of their Photobooth images.
Where are these PhotoBooth images?
Regards
TD

Click "Media Browser" and Keynote crashes

I can't seem to use the Media browser at all. Every time I click to open it, it opens and then I get a crash message:
"An unexpected error has occurred.
Please quit and reopen Keynote."
I quit and reopen and the same thing happens. I've only just installed the trial today and it is useless if I can't add photos to my slides!
Anyone else seeing this?
(I do have iWork '08 installed, if that makes a difference)

Even though the tabs wouldn't change, I clicked enough times to get the browser to open the photos (with the tab still highlighted on audio) in Keynote '08. I then closed '08 and opened '09 and the media browser defaulted open to the Photos tab and worked fine after that. Maybe some weird glitch? Anyway, consider this topic answered.

Media Browser and iTunes Screensaver Unable to See Through Aliases

Similar Messages

Maybe you are looking for