Media Browser Doesn't Work

Hi, whenever I press the Media browser icon or select 'Show Media Browser' on the view menu nothing happens. All other icons (Inspector, Adjust etc.) work fine. Have I missed something that's changed recently? Any help will be greatly received.

Alan ~ +"A lot of problems can be solved simply by..."+
Read more in the "Fix iWeb" section here:
http://www.iwebformusicians.com/WebMusic/iWebTips.html

Similar Messages

I can't open wmv files with Lion. Windows media player doesn't work. Any suggestions?

Unable to open wmv files using Lion. Windows media player doesn't work. Are there any suggestions.
Thanks

Lynnie Marie ---
macfriedchikkin's reply would make sense to you if you were trying to open a camera, but if you are trying to view streming media from a web site that is a different story. It helps to be very specific about what you are tyring to do on these forums.
I belive you would go into Firefox Preferences menu and tell it to use VLC as the application to play WMV files. I'm still running Tiger, however, so I can't tell you if it the latest version works wel that way. The Tiger version doesn't seem to, but a lot may have changed since then. (I'm only just getting around to installing Leopard next week now that there are too may apps I can't run on Tiger. ) Perhaps someone else on this forum can better help you set up the player in your browser.
Or you can cut out the middleman and give VLC the direct video URL:
Choose Open File from the File menu and paste in the URL of the video, say,
http://azul.streamguys.com/auduboncal-1
or http://azul.streamguys.com/auduboncal-2
Your media should play this way. Dont forget to save the playlist for later.
I'l keep investigating on my end, and yes, I'm also encouraging certain people who are streaming windows media in to switching to a different format
Best --
G

Error: wireless media transfer doesn't work

Good day.I have a problem on my Sony z Ultra. It can not make a wireless wi-fi connection with my PC. A few times i have connected my phone with PC wireless, but then it seem to be that I have something spoiled. Now PC tell me that "it isn't possible to coordinate device parameters with this system"What can I do in this situation?

Hey guysHave you read what the gentlemen above wrote?wireless media transfer doesn't work....not usb cable connection does not work.!!! I have the same problem.Can you please help me with it? Win7Pro64bit, Sony Experia Z1 compactI follow all the steps as given by the phone, it even says, the devices are pairedbut when I want the devices to connect, it just hangs and then gives me message "It isn't possible to connect to [yourpc]" Can you please give me some troubleshooting steps?What to check, where to look, how it works, links, articles, anything? please Thank you Hugo

Inspirational browser doesn't work

Hi! I am Rudy, I need help. My inspirational browser doesn't work. Thanks for help.

Why don't you give us some details?
OS version?
PSE version?
What steps are you doing? What exactly happens ("doesn't work" doesn't help us)? Any error messages?
Ken

Media Manager doesn't work anymore

When I'm capturing and logging footage, Media Manager is part of my work flow. I capture the entire tape, then use the DV Start/Stop detect function to make subclips. Then I use Media Manager to create smaller versions of the subclips. I I log and archive the newly created compressed clips, and use them for edits.
But now with FCP 5.0.2, Media Manager doesn't work like it used to. The end result of outputting the subclips is one large clip. If I output half of them at a clip (1,3,5,7,9,etc.) and then go back and do the rest (2,4,6,8,10,...) it works. But what a pain. I've tried every variation of settings. Nothing make a difference.
What gives?
Also, the subclips all now have the first frame of the next clip stuck on the end. That's not Media Manager, it happens before. But it is not cool.
Anyone having similar problems, and any solutions?
-Daniel Cohen

Tom,
Here is the process:
Capture the entire DV tape as one long clip.
Use DV Start/Stop detection to create markers. (This results in that extra last frame from the beginning of the next clip.)
Make subclips from the markers.
Select subclips and go to Media Manager
Use Media Manager to Recompress
-Recompress media using OfflineRT NTSC (Photo JPEG)
-Delete unused media from selected clips.
-No handles (I want the clip as it was on the tape)
-Base media file names on clip names
-Select a media destination
And off it goes.
Instead of creating individual clips (at the slected location) it makes one long clip, like the source just smaller because it is now compressed.
In earlier version of FCP this worked. Something has changed in version 5.
I can trick the Media Manager by selecting every other subclip, outputting, and then going back and selecting the rest. But that is twice the work. And I still have those darn extra frames at the end of the clips.
Any ideas. (I have already done the Quicktime repair listed in many other threads.)
-Daniel Cohen

Media Manager doesn't work

I have a Blackberry 8330 (CDMA) v4.50.191 (Plaform 3.4.0.62).
The Blackberry desktop manager is v4.5
The Media Manager doesn't work.
when I click on the icon for it, the window gets a grayish tint -- like it's going to do something -- but then it returns to normal and nothing happens.
I am trying to download photos I took with my Blackberry camera to my computer.
Can anyone tell me some recommendations on how to download them and/or repair the Media Manager?
Thanks,
Sharlene

Hello,
My advice, skip the Media Manager and instead use Mass Storage Mode:
KB11879 What is mass storage mode
With that, you can work with your BB memory area(s) as USB drives on your computer, and use your normal computer interface to do so.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Premiere Pro CC Media Browser doesn't display a RAID

I'm running PP CC 7.2.0 on a Mac (10.8.5).
I've added an additional RAID (OWC Mercury Elite Pro Qx2 - 16TB) to my Mac Book Pro Retina attached via USB 3.0. However, it does not show in the Media Browser.
Above shows view of my Local Drives.
Above shows view of mouse selected local drives. The OWC drive is "seen" by the Media Browser, yet I can't get it to "mount" as a Local Drive.
I have reset PP CC's prefs with a restart with SHIFT held down. I have unmounted other dirves, guessing that I had too many devices on the USB bus (a silly idea, really - but worth a test) to no avail.
Thoughts?

Hi Alex
I ended up reformatting the OWC drive using File Utility and now it works fine. All I can think is that there's something Premiere doesn't like about how OWC's formatting utility works. The good news is that the drive works great when you finally get it running.
Sean

Media kind doesn't work

Hey guys I just upgraded to iTunes 11 for windows. I am having trouble changing some music files to podcasts. This was fixed in iTunes 10 some time ago. Any thoughts?
I have tried changing the media kind and it seems not to work..

It doesn't work in iTunes for Mac either.

Help iWeb Media browser doesn't see iPhoto

New to iWeb and just upgraded to MacBook Pro. Have iPhoto all set up with my pictures but iWeb media browser does not show my library. I thought it would be automatic, but is there something I need to set up? I have looked and can't seem to find a fix for this. Appreciate any help.

Did you guys ever get an answer? If not, see this thread, it worked for me and I had the same issue:
http://discussions.apple.com/thread.jspa?threadID=2050020&tstart=15
Santiago

My Browser doesn't work

I used to be able to select Browser and it would take me directly to the Internet. Now when I select Browser, It takes me to a "Services - Email Accounts" page and I am unable to access the Internet at all. What happened?
Solved!
Go to Solution.

First try reregistering the device by going into Options | Advanced Options | Host Routing Table. Find the bold entry, hit your menu key and select Register Now. See if you get a registration message in your Messages list. Afterwards try resetting the device by removing the battery for a minute.
If that doesn't work go into your Browser, hit the menu key and select Options. Go into General Properties. Try changing the Default Browser from BlackBerry Browser to Internet Browser (or vice versa). Then close and reopen the browser
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Media Browser doesn't refresh Aperture images

This just started happening recently. The old behaviour was -- iWeb is already open, I open Aperture, add images, and the media browser in iWeb would pick up the new images within a few seconds.
Now the only way I can get the media browser to show the new images is to exit and restart iWeb.
Any way to get the automatic media browser refresh working again?

Have you tried reapplying the following:
iLife Media Browser Update
iLife Support 9.0.3
OT

IWeb "open new page in browser" doesn't work?

On websites I have created in iWeb, the hyperlinks to a web page will not open in a new window even though I have checked that setting in the Inspector. Previously when creating websites with html I would simply add the "blank target" code but in iWeb there is no way to edit html directly. I have tried this with Safari and with Firefox, it doesn't work!
Message was edited by: Ironic Bliss

Thanks for those helpful suggestions, though I have batted around different ways of trying to get iWeb to register the "open in new window" when checked, to no avail so far, and it doesn't work with any link, whether in text or combined with an image. Taking all these points:
I have now managed to open the html using TextWrangler but I must admit it is a little beyond me to even find the string of code in question as iWeb uses so many files. It would be better if I could just get iWeb to do the work for me as it's meant to.
Strangely, when I open the website in iWeb the first time, all the pages to the left are marked in red before I've done anything! So I cannot use that as a simple check to see if a change has been made. Also I have already tried making other changes after checking the "open in new window" box before saving.
I always publish to a folder on my HD, as I am uploading to a server that is not me.com or mac.com. (Could that be the trouble? iWeb seems to generally be very unfriendly to publishing on other servers than Apple and I have had to jump through a lot of hoops with various things.)
Could it be the weird folder hierarchy created by iWeb, where there is an index.html page outside of the main folder where all the stuff is kept? So far, I have just uploaded it to the server "as is", so the contents of the main folder (which has another index.html rather strangely placed outside it) are not at the root level on the server. The folder containing them is at the root level and so is the "external" index.html. Would it work if I uploaded only the contents of the folder to the root directory on the server, and not in the folder that iWeb creates or with its "dummy" index.html outside it?
(I think in the past this has caused trouble with Google search sitemaps, and is the reason why in the end I uploaded the whole thing and not just the contents of the main folder.)
So to be clear (not that easy here), the files on the server are:
Directory > index.html plus the folder containing all the website files. So the actual website files are at a second level in a folder, not at the root level.
The easiest example where the blank target doesn't work is on the home page of one of my websites. Scroll down and there is an image of a book which has a link to a bookstore. This should open a new page in the browser, but never does. (Annoyingly, in FireFox it even kills the back button, Safari works slightly better in that respect.)
http://www.ordoastri.org/OA/Ordo_Astri.html

Media player doesn't work right , code# cood1197

Why won't any of my music play on windows media player and rip any music to my ipod recovered august since then player doesn't work right now. product bv545aa#aba serial# 4ce1031lws ,model # p6754y & getting code # cood1197 & are there any free updates for player ? thank you.

I haven't had a problem with either. I have switched to using MixZing as my player because it also allows me to work with the contents of my SD card and has a nice equalizer function that really works well with a quality pair of headphones or when plugged into my home stereo. It's available on the Marketplace.
I do know that with Youtube, I get much less buffering if I pull videos through the WiFi function when attached to my home network.

Apps and media library doesn't work after software...

Hey guys!
Few days ago I updated my C3-00's software and my apps (Opera Mini and Facebook) doesn't work anymore. I tried reinstalling Opera but when I try to open it it says Opening Application and immediately after that Closing application (same with Facebook client).
My second problem is that my media library is messing with me because it maps the song artist and titles (484 songs) and only the few ones within a folder is played over and over. E.g. I try to play Queen - I want it all but Pendulum is played besides that.
Thank for helping

Read
http://support.apple.com/kb/ht1808

Media browser doesn't show Aperture but shows long-uninstalled iPhoto?!?

hi,
Now that 3.0.1 seems to have solved most of my problems I can finally concentrate on the details.
My media browser in iLife, iWork and mail.app gives me a choice between photos from Photo Booth and iPhoto. The weird thing is, when I select iPhoto it tells me that iPhoto 5 or higher should be installed, which it isn't as I haven't used iPhoto for years (and never on this computer). And, more importantly, Aperture is missing.
I have already deleted the iApps plist, restarted a couple of times, repaired permissions a quarter of a million times in the last few days, and none of it helped.
I know this is an issue that has popped up more often in this forum and for which a definite solution hasn't yet been found, but I'm hoping the iPhoto part may shine a new light on it allowing somebody smarter than I to solve this.
Thanks in advance. Oh, and thanks to the entire forum for what they did in the last few days. So many great tips and solutions were given by so many people.

This worked:
I created a new library by selecting >file, >>switch to library, >>>other, selected New Library. Then Quit Aperture (have to do this because it did not take until I quit). Restarted Aperture and switched back to my normal library.
Access to my Aperture library in the Media Browser came back right away. Desktop Background also returned. I had to restart the Mac to get the Screen Saver to come back.

Media Browser Doesn't Work

Similar Messages

Maybe you are looking for