Media Browser is not showing fiber optic server volumes.

Using Avid Unity fiber optic server I can edit with Premiere but the volumes are not showing in the Media Browser. Ethernet volumes are showing in the Media Browser.
Ideas?

Similar Messages

Media browser does not show photos

The media browser in iDvd & iWeb does not show the photos in my iPhoto library. It does show the tunes in my iTune library but not the photos in my iPhoto library. When I click photos in the browser, the browser says, "Open iPhoto2 or later or Aperature1.5 or later from your iPhoto or Aperature library in this list."
I have iPhoto6.0.6. When I made a DVD two months ago everything worked okay. I suspect that I am missing something very obvious, but to date it escapes me. Does anyone have some experience with this problem? Please help.

One thing that you can try is the often used maintenance of deleting preferences and doing a permissions repair. To delete preferences, close iMovie and iPhoto and trash the files named com.apple.iMovie.plist and com.apple.iPhoto.plist found in User (the house icon)/Library/Preferences. Then restart your computer and do a permissions repair using the Disk Utility app found in HD/Applications/Utilities. In the left hand pane of the Disk Utility window select your hard drive icon and then click on repair permissions. Takes about 3 minutes to repair. Then relaunch iMovie and iPhoto and see if you still have the problem. Those applications will recreate the .plist files that you deleted.
However, this might be an iPhoto issue, and I would suggest that you post your question in the iPhoto forum as well.
Have you updated iPhoto recently? Have you made any manual changes to your iPhoto library? Do you use keywords? Is your iPhoto library stored on an external drive where possibly iMovie can't locate it?
It could be that you just need to rebuild your iPhoto library. You can do that by holding down the Option and Apple keys while launching iPhoto. Then chose the first 3 selections in the drop down menu. But be sure first to back up your iPhoto library to guard against power outages or other probs during the rebuild process. As I say, check with the iPhoto forum if deleting preferences and repairing permissions does not work.
See if anything in this thread helps:
http://discussions.apple.com/thread.jspa?messageID=8450454&#8450454
Message was edited by: Rich839

Media browser does not show previews of raw photos

Hello,
I use Aperture 3.4.3 and I have the following problem. If I import photos in jpg format they are immediately available in the media browser and can therefore be selected as a desktop photo via the Desktop & Screen Saver preference pane. If I import photo's in raw format, they do not appear in the media browser until I have forced Aperture to rebuild the previews. If I edit the photos without forcing Aperture to rebuild the previews they are not available in the media browser.
Any suggestions are welcome

1. Aperture does not generate any previews when importing jpg's, raw photo's or merging libraries even though I have selected New projects automatically generate previews and always share previews with iLife and iWork (I am importing photos into an existing project but I would expect photo previews to be updated automatically in these cases as well). My statement above that Aperture shared jpg's automatically is therefore incorrect.
This looks like your preference settings cannot be stored by Aperture. You write, that you already tried to remove the preferences. You did look in the "Preferences" folder in your hidden User Library in your Home folder ~/Library/Preferences/com.apple.Aperture.plist and not in the System Library on your MacintoshHD /Library/Preferences/com.apple.Aperture.plist, right?
Also, when removing preferences in Lion an Mt. Lion, it is best to log off and on again after quitting Aperture. Otherwise the removal may not take, because you cannot rely on a "Quit" to remove the process from the caches. Aperture simply may launch again restored from the cache, without noticing that the preferences have ben removed.
3. If I edit the photo in Aperture after I have generated a preview (say crop it), the preview does not get updated.
That is consistent with the above.
4.You can only resolve this by forcing Aperture to generate a new preview, shutting down Aperture and then launching the preference pane.
Ths may also be related to broken Aperture preferences. The Media browser needs the preferences file to find the current Aperture library.
I like to suggest two basic tests:
Generation of previews may also fail, if your Aperture library is corrupted. Then You should have no problems with the generation of previews, when you import into a new library. Create a small new testlibrary and import a few images. Are previews generated? I not, then the problem is not dependent on your current library. If yes, you need to trouble shoot your library. Post back.
Do you have the same problem, when working from a different user account with a diffrent Aperture library? Then preferences are not a problem - you have a system wide problem and probably need to reinstall. Post back.
Regards
Léonie

Media Browser does not load iTunes Library

I was on GarageBand today and was trying to drag a song from my iTunes (via Media Browser) and nothing showed under my iTunes (playlists, songs, etc.) and I have over 4000 items on iTunes.
I also was trying to upload an attachment on GMail and media browser did not show my iTunes library there either. My screensaver is my album artwork and now it says that I do not have any album artwork. WHAT'S GOING ON?!
Thought all these problems were connected to each other so I thought I would put it all on one thread.

See this Apple doc ~ +"iLife: Cannot See iPhoto Files in Other iLife Applications"+:
http://support.apple.com/kb/TS1192
...this was from Apple's iPhoto RSS feed under "+Apple Support Knowledge Base"+ here:
http://www.apple.com/rss/
You can subscribe to any of Apple's RSS feeds via this free RSS reader:
http://www.newsgator.com/Individuals/NetNewsWire/
...or in Safari or Leopard's Mail app.

Media browser will not load iphoto

Hi
My pages media browser will not show my iphoto pics. It shows my files from garageband, but not iphoto. I tried dragging iphoto into the iwork folder and I also downloaded the ilife support 9.0.3 which was recommended in another post,but neither worked. I am able to drag photo folders, but not iphoto files.
Thanks for your help
Marcia

Hi Marcia
Welcome to the forum.
Have you moved or renamed any of the iLife or iWork suite? The whole workflow relies on being able to find all the files where they are supposed to be.
It is best to leave all of these alone.
You can not drag iPhoto (an application) into the Media Browser.
You can drag in folders of graphics and it will then browse those. Just be aware it is not actually holding any of the images, just providing links to where they are filed.
Peter

Adobe Media Player does not show day 5

On my computer, the Adobe Media Player does not show day 5. Shows days 1 through 4.
Also on Day 4, trying to view the video "Create States and How to bind them"
I get a "corrupt file" error when trying to watch using the Adobe Media Player...
Also will someone please give a clear statement how to do a download of the files so
we can watch them off line. This still isn't clear to me.
I don't know what Craig is talking about below: How does that relate to downloading the
files.
The new instructions and feed links are now live on the Flex in a Week video training home page:
http://www.adobe.com/devnet/flex/videotraining/
Please try them out!
Thanks,
Craig
Craig Goodman
Thanks so much
Fritz Klein

Thank you very much Craig for your help.
For some reason that section on Flash Builder in a Week;
+ Want to view Flex in a Week videos in offline mode?
was not displaying on my browser page. I re-installed java and it now seems to work all ok, and it along
with your advice addresses the issue.
Fritz

Belkin wireless router connected but browser could not find the host server

my new roommate has a belkin n wireless router connected to a cable modem which functions perfectly on her pc laptop. i am trying to connect my MacBook Pro to the router using her WEP password. this all works fine and my System Preferences/Network/Status shows that AirPort is connected with full strength, but i cannot load any web pages (i have not yet been able to load any pages at all using this router). the page load error reads "Firefox can't find the server at www.cnn.com" and "The browser could not find the host server for the provided address".
I spoke with Belkin support and they say the router is functioning properly, that is a problem with my mac.
When I go to Network Diagnostics, the status shows all green and says "This computer's Internet connection appears to be operating normally. Are you sure you want to use Network Diagnostics?
Could this be a firewall issue? A couple people have suggested that, but I'm not sure how to fix that.
I have tried rebooting the router and cable modem, rebooting the mac, etc.
any ideas on what settings i may need to investigate??
thank you!
Message was edited by: photoeyeseattle

photoeyeseattle wrote:
how do I know if the router has useful DNS servers? i am looking at the settings of the router on the pc that is online.
Somewhere in the settings of the router should be the DNS servers that it is using. Since the router is offering via DHCP to do DNS translation for your Mac, it must have useful DNS servers listed.
There are "public" DNS servers. I have no experience with it, but this Web page describes one from Google:
http://code.google.com/speed/public-dns/
Supposedly Google has a DNS server at IP addresses 8.8.8.8 and 8.8.4.4 that you might try. Since the DNS server setting on your Mac is grayed out, as a test you might try noting the setting in the "TCP/IP" tab of your AirPort connection item of the Network panel of System Preferences. Then switch from "Using DHCP" to "Manually", fill in the values you just noted, switch to the DNS tab and fill in Google's DNS addresses, and see if things work better.
do you have any other suggestions of where to seek help???
Perhaps a Belkin discussion group?

Media Browser won't show some textures that are right there by the rest?

Hello, ever since the upgrade to Studio the Media browser will not see 4 and a half categories of Textures. Noise thru Urban won't show in Media browser menu? Tried moving the files and used LiveType preferences but that didn't work either. They are on my Primary drive so that isn't the problem. All the rest of them work fine. They are in the exact same place as the working files. Anybody have an answer? Thank you. Daniel

See the reply under Where are the Effects? I copied the files from my laptop and installed them on my G5. Now it all works! How simple is that? They should have installed from the discs however, but they don't. Hope this helps.

Already logged in message but not showing up in Server Admin

Running server software 10.3. Most clients are 10.4.
I have several students that can't log in because it says they are already logged in elsewhere. Normally I go to Server Admin and disconnect them and they can then log in. But I've got about 4 students right now that are NOT showing up in Server Admin, so I can't disconnect them. Any ideas of what might cause this, and more importantly, how to fix it?

I have this issue as well. Rebooting the router and server? I'm glad that works but that should not be necessary. Neither should checking allow simultaneous login on multiple computers in WGM.
I will continue to look for an answer. thanks for the tip.

Media Browser does not load photos

iWeb media browser does not load photos. iTunes and Movies panels do work however.
I do have multiple iPhoto libraries, maybe that has something to do with it?

See this Apple doc ~ +"iLife: Cannot See iPhoto Files in Other iLife Applications"+:
http://support.apple.com/kb/TS1192
...this was from Apple's iPhoto RSS feed under "+Apple Support Knowledge Base"+ here:
http://www.apple.com/rss/
You can subscribe to any of Apple's RSS feeds via this free RSS reader:
http://www.newsgator.com/Individuals/NetNewsWire/
...or in Safari or Leopard's Mail app.

Media browser is NOT playing the game!

PLEASE can someone tell me why my media browser won't show me my photos or movies! Audio is no problem (the one section i hardly use) but iWeb is NO GOOD TO ME without my photos! This has been going on for several weeks now and I am at my wits end. PLEASE can someone shed some light here. Many thanks in advance.
MacBook Pro 15" Mac OS X (10.4.8)

Janet,
I got tripped up once by the 'manual scroll' in the media window...there's a tiny little dot at the bottom in the center that you can drag up or down to reveal the thumbnails--make sure this isn't the problem!
Assuming it isn't, see this thread for some more approaches to solving this.
Mark

Mail does not show images anymore server stopped responding on my iPad 2 when attempting to browse web

Over the last couple of days my ipad 2 has started to play up. First the mail would not show images in mail then when trying to browse the web it now will not open any pages. I have attempted a wipe & reload but still no difference.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

Services not showing in Integration Server.

Hi,
I have created File Adapter(Sender),RFC Adapter(Reciever) scenario in Integration Repository and Integration Directory. But none of Services,Communication Channels ,Receiver Determination etc are showing in Integration Server (transaction SXI_CACHE) after Activating them in Integration Directory.
Cache clearing is happening properly(full and delta mode).
Can anybody help, how to solve this problem.
Regards
Abhi

Hi Michal,
After installation of XI, CPACache refresh was failed.
But now cache refresh is sucessfull when we tried with URL http://sapxiserver:port/CPACache/refresh?mode=full in browser.And when i try the following URL to check history
http://server:50000/CPACache/history.jsp, no errors.
Is there any other settings do I am missing? What are the possible cases Services are not shown in IS?
Regards
Abhi

Browser background not showing up

I FINALLY got my website (www.unyquefiretrucks.com) to load but now the browser background does not appear!!! It showed up ok when I had published to MobileMe originally.
The homepage has a diamond plate (aluminum) browser background and crosspieces on the homepage itself to divide the sections (you can see the outline of the cross pieces but they don't show up) while the rest of the pages use a background with the maltese cross (fire dept. emblem) as the broswer background (no page background used). On my 9/11 memorial pages, I used a design as the page background with a color as the browser background & that appears fine. With that in mind I am confused as to why the homepage is not showing up properly...I used a web safe color for the page background & the diamond plate (tile) for the browser background. I should mention that the homepage is 875 px wide while the rest of the pages are 980 px wide...don't think this should be an issue because it appeared ok on MobileMe but who knows...that's why I'm on these forums!!
HELP!!!! I finally got this thing to load properly so I need to get this last little tweak taken care of. If you want/need to see what the site looks like normally, the unoptimized version is still accessible at
http://web.me.com/firescueguy/UNYQUEFIRETRUCKS/uNYquefiretrucks_home.html
Should I just add the maltese cross as the page background with a web safe color for the browser background on the bulk of my pages? Still not quite sure how that will affect the homepage with the diamond plate not showing up. BTW, eliminating the diamond plate on the homepage is NOT an option, that makes the entire page IMHO.
Thanks in advance for the help, these forums have been a good source of info for me. Thanks, Tom

Old Toad, thanks for the reply...FYI, I used an optimization program called HTML Optimizer Plus that FTP's my site to the server (actually much quicker than CyberDuck IMO). While I have a 1-to-1 set up for tomorrow, I would like to pick your brain as you seem to be pretty knowledgeable judging by your numerous posts. Exactly how would I load those background .gif files? They are currently in a folder on my desktop with various backgrounds. Oddly enough, the background for the 9/11 pages loaded with no problem.
Thanks for the tip on the activity window (I did not know about that tool), that definitely gave more insight into what I was missing. I will give some thought to remove the border (will probably try it on a page or two to see how it looks first before changing the whole site).
One last thing...I had named my homepage index.html (that file still exists on the server) but the optimizer program generated the file index.html.html - if I deleted this file, would the server presumably recognize the standard index.html file?
Look forward to hearing your input. Thanks again for your help, Tom
Message was edited by: Firescueguy

Print Dialog Box for Addon is not showing in Terminal Server

Dear All,
I have created a addon for Automatic Sales Invoice printing that prints the crystal report directly to the printer bu opening a
print dialog box for printer selection through SDK code.
The Same addon works fine on the server with print dialog box being showing through SDK code.
But while running on Terminal Server , print dialog box is not showing any printer though printers are redirected to that
terminal server.I am not getting whether the problem is in my addon or in the terminal server printer settings.
Please suggest as i need to know the reason urgently.
Thanks
Amit

Hello Edward,
Thanks for your reply .
But the problem is that while running on normal server the print dialog box appear with the printer name in my addon for printer selection .
But while using terminal server , the print dialog box is not getting any printer in the dialog box .That's the major concern for me
is their any way to check that why the printers are not showing in print dialog box.
Thanks ,
Amit

Media Browser is not showing fiber optic server volumes.

Similar Messages

Maybe you are looking for