Media browser vs iTunes (Music) space redundancy

I've been getting pretty tight on space and started browsing big folders. These two have many of the same movies in them. I know - I Shared them there, though I am not sure why. What is media browser? Can't I just have my movies in iTunes?
rick

Media Browser files are stored in your Project package (your RCPROJECT file). They make you movie accessible so you can easily open it in GarageBand, iDVD, iWEB, MobileMe, etc.
The copy in iTunes is identical. It makes it easy to share to an Apple TV, iPod, iPhone, or just watch on your Mac through iTunes.
You can delete one, or both, if you do not need this functionality. As long as you have one copy, you will still have your movie.
If you have deleted the EVENT files, be careful about deleting your finished movies, because you will have no way to recreate them without starting over.

Similar Messages

ITunes missing from Media Browser -- "open itunes to populate list"

I am on a MacBook Pro 10.7.3 running GarageBand '11 6.0.4 and all of the sudden no tracks will display under Audio in the Media Browser (Photos and Movies still appear). No tracks from either iTunes or GB show up. This is confusing as I have been using GB to make podcast/music mixes for more than 5 years and I haven't changed any settings or done anything different, but now I get the message "open itunes to populate list" or "To see GB songs here, open GB to edit and save your music."
Also, for quite some time I have been unable to go the alternative route of dragging tracks directly from iTunes and dropping them on to the timeline in GB -- that used to work, but mysteriously stopped, so I am dependent on the Media Browser for importing music.
I read thru the forums and tried the advice given to someone this was happening to in Final Cut -- recreating iTunes .xml file. Did that, still no tracks display.
Other advice says to reinstall GB or iLife altogether -- I hope to avoid this, but if I need to go this route, how do I reinstall GB w/o a disk? Can I do it through App Store and will it recognize that I have already purchased it?
I am dying to be able to get back in to my music mix making in GB, so thanks in advance.

moontroll wrote:
unable to go the alternative route of dragging tracks directly from iTunes {...} I am dependent on the Media Browser for importing music.
another way:
http://www.bulletsandbones.com/GB/GBFAQ.html#importfromitunes
(Let the page FULLY load. The link to your answer is at the top of your screen)
moontroll wrote:
how do I reinstall GB w/o a disk?
you can't, you'd need to find the DVD
moontroll wrote:
Can I do it through App Store and will it recognize that I have already purchased it?
no, it'll only recognize your purchase if it was through the app store

Media Browser and iTunes Screensaver Unable to See Through Aliases

My iTunes library is on a shared Airport disk. In Tiger I used an alias from ~/Music to the shared library. This worked better than pointing iTunes itself straight at the shared library because the media browser and iTunes screen saver continued to work as expected.
Not so in Leopard. When my iTunes library is an alias the media browser refuses to see it and suggests i launch iTunes 6 or later. Similar for the iTunes screen saver.
Does anyone else experience this, and does anyone know any workarounds? I miss browsing my iTunes libray from iPhoto.

docjj
If you have 64 bit Windows and daemon, you have a little work to do.
You need to install the 64 bit Gear drivers that iTunes needs for burning but are not supplied:
http://www.gearsoftware.com/support/drivers.cfm
For advice on Deamon, see this:
http://gearsoftware.com/wiki/index.php?title=SPTD_Drivers
You may also run into a problem with your CD configuration folder, if you do see this thread:
http://discussions.apple.com/thread.jspa?messageID=5324081&#5324081

IMove 09 just keeps crashing when I try to share it in Media Browser or iTunes etc

Can anyone help ?
iMove 09 just keeps crashing when I try to share it in Media Browser or iTunes or iDVD.
I have plenty of space on my HD
Model Name:          iMac
Model Identifier:          iMac10,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Thank you
Les

Locate and move the com.apple.iMovie.plist and com.apple.iMovieApp.plist.lockfile files to the Desktop, launch iMovie and try again. If that corrects the problem you can delete them from the Desktop.
They will be in your Home/User/Library/Preference folder.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
OT

Media Browser to iTunes

I know how to transfer a movie from iMovie to the Media Browser, but how do I then transfer the movie from the Media Browser to iTunes for adding to the movies collection on my iPhone?

TerrySteven wrote:
.. but how do I then transfer the movie from the Media Browser to iTunes for adding to the movies collection on my iPhone?
you don't share via Media Browser to iTunes..
there's a separate 'Share/iTunes'-feature in iMovie..
and Welcome, TerrySteven, to the  iMovie boards..

Under SHARE, IDVD is grey, what step am I missing? Only MEDIA BROWSER and ITUNES is active?

I'm unable to SHARE my IMOVE since IDVD is grey and not active, only MEDIA BROWSER and ITUNES. I'm using ITUNES '11.

Hi
A. I don't know
B. I think that THERE ARE A MUCH better choice to do - ! ! !
As Share to Media Browser is OK
(I NEVER use Share to iDVD from within any iMovie versions as the result will be bad to even worse)
Use this and Share as LARGE (Not HD - also degrading result)
Now Close iMovie and Open iDVD and Import movie from Media Browser - This will result in as Good result possibly when movie comes from iMovie'08 or 09 or 11.
If You want even better result then use
• iMovie up to HD6 - or -
• FinalCut any version
So that the material exported over to iDVD is fully interlaced - as DVDs are so and as SD-Video quality is so as Standard. (There are no HD-DVD quality (but academic - very rare and needs special players))
Yours Bengt W

Transfering MP3 library from Media Player to itunes music came but not art

I transfered about 30mb of mp3 encoded music from my Media Player library to iTunes. The software said it was reading the artwork but nothing appears in iTunes. Is there something else to do beyond letting iTunes read the library?

Hi there,
I believe that unless iTunes has imported the music itself then it will not be able to get the album art automatically.
If you have all the artwork in the folders then you may have to go through each song and add the album art to it.
Remember you can highlight more than one song and use Get Info to add album art if they are all from the same album.
Hope this was helpfull!
Paul

The update (5.0) version is or is saying that it will erase all my media including my itunes music and purchases... How do I prevent this from happening?

I want to update my Ipod Touch 4th Generation with the 5.0 version, but it says, "Updating it to iOS 5 will delete all of the media, including Itunes store purchases, on your Ipod Touch. To preserve this content, apply this update on the computer where you sync music, videos, and pictures." How do I prevent this from erasing everything on my Ipod?

You don't prevent this from happening. This is the way it is.
Everything should be on your computer. Is it not?
You should never update without making sure that everything is on your computer and backed up.

"iTunes music" folder inside "iTunes"

in iTunes preferences i have /Users/me/Music/iTunes for my iTunes Media folder location
inside this folder i find a folder called "iTunes Music" that contains: duplications from the "iTunes" folder (in the higher level), songs/albums which are exclusively there but not linked from iTunes (when i ask i tunes to "reveal in finder"), and some which ARE linked from iTunes -- so, i cant really understand the logic of it.
something tells me it got to do with the home sharing, because i find there some tracks from other libraries/computers... but all and all, it takes some lots of space on my HD, and i would be happy to know if there's a way to consolidate all of it into one folder and get rid of the duplication.
thanks for the help!

Here are typical layouts for the iTunes folders:
If you have upgraded from version 8 (or earlier) to iTunes 9 (or later) at some point, then your media folder (everything inside the red outline) may still be called iTunes Music instead of iTunes Media. The extra Music folder inside the media folder is used if you have allowed iTunes to Upgrade to iTunes Media Organization (iTunes 9) or used File > Library > Organize Library > Reorganize files in the folder "<Media Folder>" (iTunes 10). Depending on your choices for Keep iTunes Media folder organized and Copy files to iTunes Media folder when adding to library plus a little bug in which one build changed the name of the file storing the choice of layout it is quite easy for some of your files to be organized according to one layout and some the other.
Assuming you're happy letting iTunes organize your files the following steps should tidy things up (should it be necessary):
1. Select File > Library > Organize Library... > Tick Reorganize files in the folder "<Media Folder>" and click OK. Skip if this option is greyed out (already upgraded) or you prefer the older layout.
2. Select File > Library > Organize Library... > Tick Consolidate files and click OK. This will bring any files currently organised outside the designated media folder into it. NB This will create duplicate copies of any file that needs to be consolidated, and you will need to manually clean up afterwards. If space is at a premium try Doug Scripts has something that will move files rather than copy them.
3. Select Edit > Preferences > Advanced tab, uncheck Keep iTunes Media folder organized and click OK.
4. Select Edit > Preferences > Advanced tab, check Keep iTunes Media folder organized and click OK. This triggers iTunes into reorganizing everything according to your preferences.
5. (Optional) Close iTunes, rename the folder iTunes Music as iTunes Media then restart iTunes. Check under Edit > Preferences > Advanced tab that the location has automatically updated. If you can't access the media for any reason just undo the folder rename. (Assumes you don't already have a folder called iTunes Media and that iTunes Music is the currently designated media folder.)
PS If you really prefer the older layout, but it is already in the new one then edit the file called .iTunes Preferences.plist in your media folder and change the integer from 1 to 0 before doing step 3.
tt2

Final cut pro Media Browser

Final cut Pro
All I see in my media browser is Itunes.
What happened to all the audioclips which are coming with fCP.
I use Mavericks and FCP 10.1
gsall

I just went to the Final Cut App and did a Command+I and noticed I'm not listed in the permisstions. Added myself with Read/Write privileges and then ran a repair permissions and all is good.

HT3847 Using 'Grand Perspective' to see my files, I have both iTunes media and iTunes music files. It seems I have 'organised' my media, but should or need there still be both types of files? I am running out of HD space and thought, maybe, 'merging' .

I'm trying to free up disk space. When I look at my files using 'Grand Perspective' (Like 'Disk Inventory X'), I see songs in both iTunes music and iTunes media files. I'm wonder if there is some kind of duplication between them. Could I find HD space by doing something with these files? I've already 'organised' them using the iTunes library feature. But I note that it seems that organizing could leave the old (?) files in their 'original place'. That sounds to me like duplication.
I'm not at all a 'techie' so don't know where to go from here.
Henry

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

Only iTunes shows up in the Music and Sound media browser

I just upgraded to FCP 10.1 and I'm noticing that the media browser only show iTunes content in Music and Sound. No sound effects (foley, etc.) are included as before.
Is this simply that FCP no longer includes these or should there be something other than iTunes there?

Thanks Tom. After a few reboots, music is back. Thanks again. Looking for the "solved" button and nothing. I will marked solved when I am able to.
Thanks again.
Best.
Tom

Im trying to import music from widows media player to itunes, but when i delete the music from media player itunes can no longer locate it, i just want the music saved to itunes so its not taking up double the space.

I am having trouble transfering music from windowns media player to itunes. If i delete the music from windows media player itunes cant locate the song.

See Getting iTunes & Windows Media Player to play nicely for tips on sharing the iTunes library with WMP.
tt2

IMovie audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !

iMovie 11 audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !
I have created a project where I have a montage of photos and video clips edited together with music under. Some audio portions of the video files are being muted in some areas and those portions are being heard in another part of the project. This is not for all video clips only certain ones.
The project plays fine in the timeline, but when I render the project thru iTunes or Media Browser, this is when the project goes corrupt.
I tried detaching the Audio from the video clips and this somewhat worked, but the original problem still exists with certain audio still being heard where it's not supposed to be.

I have a fix - or rather, a workaround.
WARNING: It is lengthy, but still far better than starting a new project from scratch.
I had this same issue and none of my transitions/clips were at custom speeds, nor did I have anything else weird going on. Unfortunately there is nothing you can do within iMovie to fix this, at least there wasn't for me. iMovie is BY FAR the buggiest software I have ever used and if you haven't already spent hours slaving away on a project, you are so much better off using just about anything else to edit your video.
...But let's assume you have already spent many hours working on your project and you don't want to start all over. Well then, you have at least one option.
It's a pain in the neck, but it's infinitely better than restarting your project from scratch.
This will require:
A software called Soundflower (which is free) and some kind of audio editing software (I use Logic, but really any should work).
1.) You're going to need to export your video with the messed up audio. Typically if you're audio is messing up, you're video is at least usually working just fine (at least it always does for me).
2.) You're going to need to open that video in your audio software and import only the audio. If your software doesn't give you this option, then you're going to need to record the audio from your video using the audio software and Soundflower. You can find tutorials on how to do this, but it's honestly pretty straightforward once you start playing around with you Mac's audio I/O settings. Remember to have your computer's volume all the way up when doing this.
3.) Watch/listen to your video and make notes of where the audio errors occur. I HIGHLY RECOMMEND writing down times too, as they will be extremely helpful later.
4.) Now were going to rip some working audio from the iMovie project itself. Go back into your iMovie project and only play back audio while in the edit window for this step. Do NOT play your project back in full screen.
This part is key: if you try to play back your project from the beginning the audio will usually still mess up. So, what you're gonna have to do is go back on your edit window timeline right before these errors occur and play that specific clip back while recording this working audio with Soundflower and your audio software. Essentially we're only recording the parts of the audio where these errors occur, so try to do this in order if you can. Try to leave several seconds of audio in before the error - that way we can use it as reference when we construct our new audio track.
5.) Now in your audio software you should have your original error-filled audio track and the new clips that we just captured. This part can be painstaking if you're not familiar with audio editing softwares, but as you'll learn, it's really not that hard.
You're going to look at your original audio track and compare it to your new working audio clips. You should be able to notice where those new clips are supposed to go by looking at the identical (or close to identical) waveform shapes in your original audio track. The two should correspond with one another. If you don't understand what I mean right now, you will when you start playing around with the audio. This is why marking times is very important.
Take your new clips and split them up if you haven't already, that way you can drag them around and edit them separately from one another. Essentially your going to line these new clips up with original and then replace the original parts with new ones.
We need to get this as precise as possible, so start off by getting them as close as you can with your naked eye, and then use a zoom tool to zoom in as much as possible so that you can get them lined up PERFECTLY, or at least extremely close. In some softwares you can just drag these new clips on top of the old track, but most of the time you will need to actually cut out the old piece and replace it with the new one. In doing this, zoom in and make sure that you are NOT cutting out a bigger space than your new clip will fill - otherwise you will have small gaps in your audio.
VERY IMPORTANT: Also make sure that this new audio track starts at the EXACT SAME time as your original - otherwise your new audio will be out of sync.
I know this part can really suck if you're not used to audio editing, but at this point, there is little other choice.
6.) Once you are done with this, export your newly pieced together audio track.
7.) Now open iMovie and create a NEW project. Re-import the video that you exported earlier that has the messed up audio. This might take a while, so just be patient.
8.) Then right click the clip and select "Detach Audio". This will do just that - allowing you to edit the audio separately from the video. Now delete this audio.
9.) Now, import the new, perfect audio track that we just made and make sure that it starts at the start of the project. Make sure it's in sync and that everything works.
Now just export your new video with the working audio and you should be done. Since we have given iMovie the audio with no editing actually being done in iMovie, it does not have to generate its own audio now and you should have absolutely no errors now - unless there is some that you forgot to take out earlier.
YOU'RE FINALLY DONE!!!
I know this entire process *****, but if you're that far into your project, there is little else that you can do. Now you've learned your lesson:
DON'T USE IMOVIE EVER AGAIN.
I hope this helped!

ITunes files missing in Media Browser for all other apps

I've read many and posted a couple times about this issue, but new information has come to light, so I figured I'd give it one more shot.
Somewhere along the line from migrating from 2007 MacBook to my newer 2010 iMac, I've lost the ability to see my iTunes files in other apps in the media browser. This is very specific to the user that my main library (237gb). I've got a separate library on a different user account, no issues there. It happens in all of the iLife apps(like trying to add music to a slideshow), iWork apps (clicking on media), Mail (attaching a .mp3). Oddly enough, Audacity has no issue seeing the iTunes files. I've tried several solutions, including re-installing the Media Browser, and trashing the .xml file (Apple's own solution found here). Nothing worked. I had hoped the release of Lion might fix the problem, and I upgraded "the Apple way." The problem persisted.
I had thought perhaps the issue lied from carring over old code, apps, or whatever from the migration. I had hoped doing a clean install of Lion might do the trick. I finally got an external to move the library too, and do a very manual migration. Copied all documents and media to the external, boot from the Lion Boot CD I created before upgrading the 1st time, reformat drive, install Lion. It went off without a hitch. I made sure to copy all of the database files (.xml, .itl), and while all of my settings, playlists, and play counts were preserved (something that is important to me), the same problem reared it's head.
Another idea came was to start a new user account, and just use the media files, and not the database files. After simply dragging the media folder into iTunes and copying the files (the drobo has plenty of space), it worked perfectly. Except I had lost all of my play counts, settings, and playlists.
So the question is, is there a solution to fix the old user account, or is there a way to rebuild what I've lost in the new user account? I'm using completely updates software in Lion, iLife, iTunes, iWork, etc.

Turns out my "iTunes Library.itl" file was corrupt. I used the old "iTunes Music Library.xml" file to rebuild a new library with existing playlists and play counts. Though that didn't go off completely without a hitch, I did find this solution. Problem solved.

Media browser vs iTunes (Music) space redundancy

Similar Messages

Maybe you are looking for