Media Browser

when the program opens,
                                        It is not showing the media browser area Also to drag and drop area.

Make sure that it's enabled in the Windows menu.

Similar Messages

  • Can you see which timeline clips are being used in Media Browser?

    I'm a relatively new user and may not be familiar enough with cs5.5 but
    is there a way to see what clips are being used on the editing timeline in the media browser.
    I open premiere pro - Project is loaded. I edit the scene until it is finished.
    When I look over at the media browser, all my raw clips (some of which I'm
    using on the editing timeline) look the same - I can't tell which ones I using on the timeline.
    The reason I ask - when I fiinish editing a scene it would be nice to glance over at the
    media brower folder where my raw clips are located - easily see which ones I'm using because they
    are highlighted or checked and then delete the ones I no longer need.
    Is there a way to do this now?
    Thanks
    Jeff

    I dont think so  but a better way is to look in the top of the Project Window and there is a drop down that will show you all the useage instances of the clip.  You can click on them to go to them in the timeline.

  • ITunes missing from Media Browser -- "open itunes to populate list"

    I am on a MacBook Pro 10.7.3 running GarageBand '11 6.0.4 and all of the sudden no tracks will display under Audio in the Media Browser (Photos and Movies still appear). No tracks from either iTunes or GB show up. This is confusing as I have been using GB to make podcast/music mixes for more than 5 years and I haven't changed any settings or done anything different, but now I get the message "open itunes to populate list" or "To see GB songs here, open GB to edit and save your music."
    Also, for quite some time I have been unable to go the alternative route of dragging tracks directly from iTunes and dropping them on to the timeline in GB -- that used to work, but mysteriously stopped, so I am dependent on the Media Browser for importing music.
    I read thru the forums and tried the advice given to someone this was happening to in Final Cut -- recreating iTunes .xml file. Did that, still no tracks display.
    Other advice says to reinstall GB or iLife altogether -- I hope to avoid this, but if I need to go this route, how do I reinstall GB w/o a disk? Can I do it through App Store and will it recognize that I have already purchased it?
    I am dying to be able to get back in to my music mix making in GB, so thanks in advance.

    moontroll wrote:
    unable to go the alternative route of dragging tracks directly from iTunes {...} I am dependent on the Media Browser for importing music.
    another way:
    http://www.bulletsandbones.com/GB/GBFAQ.html#importfromitunes
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    moontroll wrote:
    how do I reinstall GB w/o a disk?
    you can't, you'd need to find the DVD
    moontroll wrote:
    Can I do it through App Store and will it recognize that I have already purchased it?
    no, it'll only recognize your purchase if it was through the app store

  • I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

    I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

    "Where do I find my hundreds of dollars of downloads I have done since 2005?"
    They will only be where you put them  If you are doing the very basics, then they will be on your computer and they will be in your backup copy of your computer.
    The itunes store is not global at all, never has been. You cannot redownload your content from another country.  You can only use the countrys itunes store for the country that you are physically located.

  • I'm trying to share to Media Browser a 20 minute still slide show with music and text. I have tried several times to save at 1080 HD, but just before it's finished, a message box pops up saying "File already open with write permission."  What's this mean?

    I'm trying to finalize/share to Media Browser a 20 minute still slide show with music and text. I'd like to finalize it 1080 hd and have tried several times, but just before it's finished, a message box pops up saying it can't be done because "File already open with with write permission."  What does this mean?  All files are closed; this iMovie project is the only thing open.  Does it mean one of the song files from iTunes? And should I just settle for saving it as a "large" file, which is what I'm trying right now?
    Thanks,
    Jamie

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occours only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    See also this post
    https://discussions.apple.com/thread/4434104?tstart=0
    Yours Bengt W

  • Feature Request:  Standard Keyboard Navigation in Media Browser and Project Panel

    It's been a while since I've had time to submit a feature request.  I've wanted to see this one for a while.  If you agree, please submit your own feature request here: http://www.adobe.com/go/wish/
    System Navigational Keyboard Shortcuts in Media Browser and Project Panel
    Windows (and I'm sure Mac) has a standard set of keyboard and mouse navigational shortcuts for keyboard and mouse.  I'm so used to using them in daily browsing (both in Windows Explorer and in any web browser) that missing them in the PPr Media Browser, or getting a different result in the Project Panel, is still very jarring and slows my workflow (even after having used Premiere Pro [again] since version CS4).
    I propose that the Media Browser and Project Panel should honor the OS defaults for keyboard and mouse folder/file navigation.  A few of the standard (Windows) keyboard and mouse navigational shortcuts are listed below (listed in order of most helpful to my own work):
    Moust Back Button = "BACK"
    ALT + LEFT ARROW = "BACK"
    UP, DOWN, LEFT, RIGHT = steps through the various folders within the view.
    UP, DOWN walks through the directory tree while RIGHT expands the currently selected folder and LEFT contracts that directory (twirl down, etc).
    ENTER opens a folder.
    ALT + UP = "Folder Above"
    ALT + RIGHT ARROW = "FORWARD"
    F2 Renames a folder
    ENTER "takes" that name to the clip. (current functionality used ENTER to rename a file/folder).
    ESC cancels the renaming operation.
    Pressing Enter on any piece of Media or Title, etc should take an "expected" action acording to it's context.  (i.e. ENTER on a video clip would load it inot the Source Monitor.  ENTER on a Title would open it in the Title Editor.  ENTER on a folder would take us into that folder).
    These functions exist in both Windows Explorer as well as most modern Web browsers.  When browsing files and Project folders, it's what I've come to expect.  It's muscle memory, if not intuitive.  I realize that many of these keyboard commands are already in use in other windows/panels of the application, therefore, these commands should be Panel-specific (i.e. ALT+LEFT works differently in the Media Browser and Project Panel than it does on the Timeline/Sequence).  And as always, when making such changes (i.e. changing the behavior of ENTER to F2), this set of keys should be highly configurable based on preference:
    Preference:
    checkbox:  Use OS-specific navigational keyboard and mouse commands in Media Browser and Project Panel
    checkbox:  Use the (very few) "classic" Adobe keyboard commands in the Media Browser and Project Panel
    The most common habit I find myself doing in the Media Browser is clicking the BACK button on my mouse—only to realize, yet again, it doesn't work that way in PPr.
    The most common habit I find myself doing in the Project Panel is pressing F2 to rename a folder/bin.  Of course that doesn't work.  And when I've renamed it, I press ENTER to save the name, but that only moves me to the next folder ready to rename it, too.  I also find, out of habit, I try to navigate the bins using the arrow keys and then open the bin/folder using ENTER.  Instead, my bin is asking for a new name and I hit ESC to avoid renaming it—now THERE's a shortcut that works the way it should. 
    I realize this feature may be controversial to some, since it's not the way we're used to doing things in PPr.  However, I'm sure there are just as many out there, like me, who are confounded as to why PPr has never worked with the "conventional" navigation shortcuts found throughout the rest of the operating system, be it Windows or Mac.
    If you agree with this feature request, please submit your own feature request here: http://www.adobe.com/go/wish/

    Nice ideas Jeff.
    There is a site - Flash Catalyst Wishlist/Ideas where you can post these ideas so that the community can vote on them.

  • Photo thumbnails not displaying in Media Browser

    Every time I open a program that features the Media Browser (which is just about everything in Leopard, these days), I never see thumbnails for my iPhoto images. I just see exclamation point icons-- in other words, the images themselves are never displayed.
    In iPhoto, I can see individual pictures, but not events. For events, the images are just embossed "blank" boxes. I don't understand what's happening... can anyone offer some help so I can get my Media Browser working the way it's supposed to... along with iPhoto?

    Hi All,
    I am facing the same issue w.r.t Photo Display in MSS General Information.
    Whenever i logged into MSS General info its asking ECC system Credentials to Display the Photo.
    it showing the Error like
    SAP ArchiveLink: Data Element for Absolute URI
    can you please give me the solution
    Earlier its asked me the credentials in ChangeOwnData - PhotoDisplay, but after FQDN,its not asking any Credentials. Photo is Displaying fine in COD Service in ESS.
    Please suggest me the solutin for Credentials asking in Photo Display in MSS..
    Thanks in Advance
    Adapag

  • Audio clip plays normal in Media Browser, but imports as "clicks" in session after saving & reopening.

    This problem has happened with almost all of my large Audition projects. File links are intact & properly managed, and most audio files play as expected. However, some files in the session get replaced with this "click" track, for lack of a better way to describe it. The audio is literally replaced with a repetitive click, or pop sound, as you can see in the image below:
    Both tracks had waveforms like the top track, but now the second track has been replaced with clicks.
    The strangest part: The file in question, in this case: "Grass" (downloaded directly from Youtube Audio Library, so, not corrupt) previews perfectly fine in the Media Browser window. In the File Browser, however (tracks actually used in the session), it previews as nothing but clicks. When I try to then replace the track in the mixdown / file browser with the seemingly uncorrupted file in the Media Browser, it comes in as clicks!
    The only thing I can think of is that the analysis files associated with the project are getting damaged?
    Please help!

    Can you send a copy of the Grass audio file to [email protected] and we'll take a look?

  • Extremely long "reading" times in media browser

    We are running CC2014 on 3 edit systems with a shared 10Gbit 36TB Synology NAS.  Each workstation has approximately 12TB of local raid storage as well. We shoot P2 primarily and I have a little over 17TB archived on the Synology.  Lately, we have had extremely long "reading" times in Media Browser on all the machines.  I don't quite understand how Premiere is indexing and displaying as sometimes the "reading" time is relatively quick, ie. under 10 seconds and then other times it can take 3-5 minutes to display clips within a directory.
    My Directory Structure is:
    Media
         P2 footage
              (P2 folders/ie. cards are all saved with their shoot dates here)
              Our total archive of P2 footage is around 70 cards.
    It appears that when Media Browser is pointed to a P2 Card folder it is indexing the entire "P2 footage directory, ie. all 70 cards", rather than just the individual folder containing 1 P2 card's footage. Ist this the case?
    Would I get better read speeds in Media Browser if I organized my P2 footage into more directories, ie. by year and quarter or by year and month?  
    Really need to know how the indexing works.  Does premiere cache preview files for each clip and if so, how long are these previews valid.  It seems that when I media browse a new P2 Card/Folder, it has forgotten any previous preview files that have been made and cached.
    Any explanation or help would be appreciated.
    We have copied large numbers of cards/folders from the Synology to our local raids to see if the latency was due to the network but the results are the same when we media browse on the local raid copies.

    We are working on this issue. Could you open a support case and submit your
    project so we can have support see if it is fixed in a later release?
    br
    William Wheeler wrote:
    Is anyone experiencing long deploy times using Eclipse with the Portal/XML Beans facets...it takes approx 30 mins to deploy our ear file. The ear contains:
    3 large schemas projects (using XML Bean Builder facets)
    1 Control util project
    1 Portal Web Project
    1 Ear Project
    3 Util projects
    Is there some validation options that can be turned off or other actions to speed this up?
    Bill Wheeler

  • MXF Missing Audio in Media Browser, or Is it?

    Happy Fourth of July to all my American friends.  Did you know it's going to be the Forth of July up in Canada and everywhere else in the world tomorrow too?   Can't tell you how many times I've been asked if we have the Forth of July in Canada.  Duh, of course!
    So I've got a weird thing going on.  I use Sony Clipbrowswer to cut up my BPAV files and trim everything down and then I convert them to MXF (I personally HATE the BPAV folder structure).  I look at the clips in Media Browser in PP and I get perfect video, but no audio.
    I then import the clips into the project and look at them in the Source Monitor.  Same thing.  Video, yes; audio no.
    I drag the exact same clips into the timeline and they come in with 4 channels of audio (huh?) and BOTH the video and audio work fine.  Not sure what's going on.  I would really like to see AND HEAR them in the media browswer and source monitor so I can set my in/out points.
    Any ideas?  BPAVs of the same files act normal, just not their MXF sister files.
    Happy Forth to everyone else in the world too!

    Any ideas?
    Yep. The Source Monitor has the annoying limitation of only being able to preview one audio channel of a multi-track clip at a time. So, even though your source footage has four mono channels, by default, the Source Monitor will only preview Track 1. You can change that to Track 2, Track 3, etc., but no matter what, you can't hear a mixed monitor output.
    What I suspect is happening is that your first audio track doesn't have any audio, or it's very low. When you drop the clip wholesale into a sequence, you can hear the audio because you're getting all four tracks mixed. If you click the Output button in the Source Monitor and change to Audio Waveform view, you can use the track selector dropdown to choose which audio track you want to preview. Unfortunately, this isn't "sticky," so you'll need to do it each time you open a multi-mono clip, if your primary audio isn't on Track 1.
    I've made several feature requests for improvements to this functionality. I work a lot with P2 MXF, and this has driven me half-mad; whenever I interview, I put my primary audio (lav) on Track 2. Previewing and marking up clips like this is a bear without proper audio monitoring.
    Anyway... does that fix it?

  • No Network Drive in Media Browser

    We have a server that runs to both Macs and PCs in our studio, the PCs having been just installed. When cutting on a Mac, we can see our server in the Media Browser and reconnect unlinked footage when necessary. However, on the PCs, we can not see the server in Media Browser and any files offline can not be found/reconnected via Media Browser.  Any ideas on this issue? Being primarily a Mac user, I have a feeling this is a simple fix that I'm missing, but can't figure out. Thank you! FYI we are working off CC with latest updates.
    EDIT: Let me add that we can edit with footage off the server bringing it in from Explorer.

    We are ok on the Mac side, it's the PCs with the issue. We can connect to the server fine via explorer but it won't show up in the Media Browser in PP. The server is Linux based if that has any bearing...

  • Why are my EXS .cst settings grey in media browser?

    I tweaked the EXS Modulation Matrixes for Orchestra Bassoon for use with breath controller and saved the .cst file. I can see it in the finder in the GarageBand settings[JamPack4] but it's greyed out in Logic Express 8's "Media"-""Browser" Any solutions? Any one else had this problem?How could I get it to use in project now? Copy and Paste?????? I assume it's in the right place because I used the EXS's "save as" before closing that project, and it is in the Finder.

    hi jt, you might be aware of this already but i only
    get this problem when two notes of the same pitch
    overlap.
    and it's only with some patches.
    i always check in the matrix for overlaps when this
    happens.
    I do have notes overlapping on the same pitch but on different midi channels (midi 1 is a strong attack while midi 2 is my sus). To test if this was the problem I deleted the "attack notes" leaving just the sus's, and the problem still exists. The cutting off happens well after the "attack" patch is done playing, so I dont think this is the problem and put the attack notes back into the track.
    As for the suggestion of using cresc patches, as far as I can see there are no cresc patches in Opus 1/2. The closest patch I've found was something called "dynamics_all" which gives you fp, sfz, sffz, and a 6 sec pfp. The only one that comes close is the pfp, but it doesnt have the sustained power of the F, as it immediately decres back to p, so I'd much rather use the mod_dynamics patches as they have the sound I desire.
    The freezing tracks workaround does work, though its a PITA as I use midi instrument objects to control my EXS instruments. Glad that it works though, so at least I can hear the parts played back correctly.
    So bottom line, is this a Logic bug? Should we all send in some logic feedback? Will upgrading to 7.2 fix this issue? Its amazing how many issues I run across just trying to write music w/ Logic. Its a rollercoaster of highs and lows! I'm sure its like this in all sequencing programs, but it does get tiresome after awhile!

  • Projects "Shared to Media Browser" don't actually appear in Media Browser

    Hello all. I've got one of those "it seems so easy I must be doing something wrong" questions. (I accidentally posted this in the iMovie HD forum by accident, the first time. I'm actually using iMovie '08.)
    This is the first time I've tried this, and I can't seem to get it to work. I've made a bunch of projects in iMovie that I now want to bring into iDVD. I've started "Sharing" them to the Media Browser, but they're not showing up there. Doesn't matter which other iLife app I use to look -- iWeb, iDVD, GarageBand all do the same thing -- when I look in the "Movies" section, iMovie is there, as are all the Events in my Event Library, but from the screen shots I've looked at, I think the "Shared" iMovie projects are supposed to show up there, just above the Event Library clips, right? They don't.
    In iMovie, they look "shared" -- the shared projects all have the "row of square boxes" icon next to them, so it looks like something did happen -- but I can't select them in any other iLife app. My next thought is I'll just export them instead of share, and import the files directly from the Finder, no big deal, but I was just wondering if anyone knows why the Media Browser thing isn't working for me?
    I'm using iLife '08 and I have my Movies folder on an external drive (could that be part of the problem?)
    Thanks in advance, everyone, for any assistance you can render.
    Scott
    Los Angeles, CA

    I've started "Sharing" them to the Media Browser, but they're not showing up there.
    1) Sharing to the "Media Browser" stores the project export file in your named_Project folder. As long as you do not delete (or modify) the project, the file(s) will remain available there.
    2) Your "Media Browser" files should be located under the "Movies" tab at the very top of your "Media" browser list immediately under the "iMovie" heading and not under the "Movies" heading. (I.e., they have the yellow icon as opposed to the purple source "Event" icon.

  • Why doesn't my files show up in the "MEDIA BROWSER"?

    I recently shot footage on my SONY CX-550 HD camcorder.  Each day's footage was downloaded to my desktop in separate folders ( DAY_01, DAY_02... thru DAY_08 ).  There are many clips in each folder ( 00000.mts, 00001.mts, etc. ).  In PPRO CS5's "MEDIA BROWSER" I can see the clips in all the folders except DAY_02 and DAY_08.  If I move a clip out of the folder to another location ( DESKTOP ), the "MB" still does not list it.  I can, however, drag the clip from the DAY_02 folder into the PROJECT WINDOW and the plays correctly in the SOURCE WINDOW.  I use the "MB" to quickly review a clip by double-clicking it.  Having to drag each one into the "ProjWin" for review is time consuming as is reviewing the clip thru Windows Media Player.  BRIDGE CS5 displays a thumbnail for each clip as expected.  So, why does the contents of just these two folders not display in "MB"?
    Thanks in advance,
    Sonny Gaither

    You're welcome.  My mistake, I completely misread your question. Unfortunately currently  I don't have any email threads to check it out, just replys from the Apple Support Communities.Sorry.

  • Can't access Aperture 3 previews in iLife Media Browser

    I know this has been posted before but I don't think I've seen a resolution yet ....
    Since migrating all of my data etc from my MacBook to new iMac I can't see the Aperture previews in the Media Browser. I've tried reinstalling Aperture and previews are set to be shared with iLife (in Preferences).
    Any ideas?
    Thanks in advance.
    Jon

    Thanks for this - it didn't work, but something else did!!
    Turns out there's actually a Knowledge Base answer on a similar matter (discovered after calling Apple Support). Just open Aperture from the dock whilst holding Option + CMD and then select to Repair the library - middle option. Worked straight away!
    Thank you
    http://support.apple.com/kb/ts2875

  • How do I get network drives to show in left panel of media browser

    Okay, I'm new to audition.  When I start Audition's media browser, only the local HDD's are shown.  If I OPEN FILE, I can navigate to find tyhe network drive and Audition will open the file.  Also the network drives show in Windows Explorer.  I searched the FAQs and the help file, but maybe I'm not using the "magic words"  So, how to I get these network drives to appear?
    Windows 7 64 bit home premium
    home built 3.67 gb Intel Quad core, 12 GB RAM, Several local HDDs
    Audition CS6
    Thank you

    I'm not sure this is correct.  I have mapped a NAS to drive "Z" and mapped a drive on my video editing desktop to drive "Y."  These both show up in the left panel of the media browser for Premiere and Photoshop as the share names  "MYDOCS" and "BAAAA,"  as well as in Windows Explorer.  But not in Audition. Only the local drives are shown in Audition's media browser.
    I can open a file in audition by using BROWSE by clicking on "MYDOCS" or "BAAAA" as they appear in the Windows Explorer file dialong and then navigating on those drives to the desired files.
    What am I missing?  Do others have their network drives show in the left panel of Audition's media browser?

Maybe you are looking for