Media buttons not responding when music is playing in background

Hi All,
I have listened to some music today on my Curve 8520 and I just realized a problem.
When I play the music, I'll go back to the home screen, while music is still playing the background, i tried to pause the music using play/pause button at the top of the phone but it didnt work, so i tried the other two button which is the previous and next track button, they both dont work either.
So I go back to now playing part on my phone, so i can see my music playing, and then I tried the top 3 media button and it all works fine so I know there isnt any wrong with the buttons themselve.
Does any one know why when the music is playing in the background, the top 3 media buttons doesn't work?
Thanks

Check out bugs 2200274 and 2008854. I think it was fixed in patchset 10.
Regards,
Robin Zimmermann
Forms Product Management

Similar Messages

  • My ipods power button not responding when pushed

    my ipods power button and volume buttons are not responding when pushed

    Try the following to rule out a software problem:
    - Restore the iPOd from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.
    If you still have the problem then it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • ITunes Music and Home button not responding

    Itunes Music & Home button not responding all other content OK when music button clicked displays the following "The item you've requested is not currently available in the UK store"

    I haven't read this whole post - in fact I almost stopped reading any of these post. I read all the horrors look over at my own phone (which is working correctly at the moment) and wonder when it is going to go belly up.
    jyoz, Try doing a DFU and setting up as new. I don't believe that "Restore" goes deep enough to clear the bad code.
    Do you also have poor battery life?
    The reason I ask is I am starting to believe there is a piece of code that is corrupt and running at near 100% CPU usage.
    If this is the case it sort of explains button, icons and poor battery life.
    There is one other suggestion that I have read that says delete all email accounts and reset/erase all. Then go to DFU and setup as a new phone. This procedure probably gives you the best chance of clearing out the Bad Code Snippet. Just to defend all this crap that we have to go thru I did get an Apple/at&t support guy tell me that even "Push" on email is/does not always work correctly. Once he realized what he said I could not get him to talk about it anymore - Apple you gotta love-em.
    I know you have been thru hoops trying to fix this but you only have two option take it to a store and don't leave until you get a new one that they have updated to 4.1 for you or try some of the extreme suggestion that I am repeating from other post.
    Best of luck - and please remember sometime there are failure that you at home are just never going to fix - so if you don't feel like another Excedrin headache GO TO THE STORE AND EXCHANGE IT if for no other reason than to preserve you mental health.

  • The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

    The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

    I tookyour suggestion and SUCCESS!  I can now access the Itunes Store.  A simple fix, and thanks so much!!.
    Below is the advice you forwarded:
    I found a solution to my problem.
    > start menu
    > accessories,
    > right click on the command prompt icon and choose "run as administrator".
    Once it opens, type in the following command...
    netsh winsock reset
    hit enter
    You should get a message that the winsock reset successful and you will need to reboot your computer.
    Reboot and when I reloaded itunes the store loaded fine.
    Thanks again, -Dean Stoneburner

  • After updating to iOS 6.0.1 volume button not responding even theirs no volume slider in music app nor video app plz help m using iPhone 4 os Windows 8

    After updating to iOS 6.0.1 volume button not responding even theirs no volume slider in music app nor video app plz help m using iPhone 4 os Windows 8

    I suppose that you can demand all you want. It would have to be proven that the iOS update broke this particular function but it could also be said that it was just a matter of time that the broken thing manifested itself. Since the phone is out of warranty, it could also be said that it is your risk to update software. I'm not trying to be argumentative here, but we are not Apple. We are users like you and just try and provide support to other users. What you decide to do from here is your decision. I've given you all I know to do.

  • HT1766 no sound from my speaker, headphones play normal, phone rings normal, alarm sound normal, re-installed software, will not play sound when music is played from speaker but speaker works for everything else....

    No sound from my speaker iphone 4S, headphones play normal, phone rings normal, alarm sound normal, re-installed software, will not play sound when music is played from speaker but speaker works for everything else....(phone ring and alarm)... no notification sound for text messages......
    I checked all settings..... good...
    confused???
    please advise,

    it's a hardware issue read more about it here
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    more hits
    https://www.google.dk/search?client=opera&q=4:3&sourceid=opera&ie=utf-8&oe=utf-8 &channel=suggest#client=opera&hs=UGk&channel=suggest&sclient=psy-ab&q=iphone+stu ck+in+headphone+mode&oq=iphone+stuc&gs_l=serp.3.3.0l4.412779.418971.0.420896.16. 9.2.5.5.0.86.545.9.9.0...0.0...1c.1.9.psy-ab.HHtp6aEcO5U&pbx=1&bav=on.2,or.r_cp. r_qf.&bvm=bv.45175338,d.bGE&fp=43d9a4347e8aaeda&biw=1535&bih=773

  • My touch just stopped playing as if out of power, but is not responding when plugged in

    My iPod touch just stopped playing as if out of power, but it is not responding when plugged in.  I've left it plugged in for about an hour and still nothing. I'm not sure how to reset. Any suggestions would be welcomed....

    Try here. If not successful, an appointment at the Genius Bar of anApple store is in order.
    iPod touch: Hardware troubleshooting

  • Why is my macbook DVD player no longer playing commercial DVD's that it used to play perfectly? It reads the disc, but then says not permitted when I hit play. It is much older than 12 months warantee so I hope there is an easy fix?

    The macbook reads a disc, and opens up DVD player but then says not permitted when I hit play, or any other button. Sometimes the initial music plays, but the screen remains black and then it all stops. These are shop bought DVD's that have previously worked on here, and work in DVD players, but have suddenly stopped. The computer is much older than the12 months warantee so I hope there is an easy fix? Thankyou!

    Three things you can try:
    1. Clean the superdrive with a proprietory CD/DVD lens cleaner that uses tiny brushes.
    2. Perform an SMC reset:
    Resetting the SMC (System Management Controller) on Intel-based Macs:
    http://support.apple.com/kb/ht3964  and
    http://support.apple.com/kb/HT1237?viewlocale=en_US
    Resetting your Mac's PRAM and NVRAM:
    http://support.apple.com/kb/ht1379
    If you are using a Wireless Keyboard:
    http://support.apple.com/kb/TS3273
    3. Try the free DVD player VLC:
    http://www.videolan.org/vlc/
    which performs better than the built-in DVD Player.

  • With ios 8.3 ipad mini apps sometimes do not respond when touched

    a new problem occurred with ios 8.3 ipad mini applications sometimes do not respond when touched Fix it in ios 8.4

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

    Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

    - Go to Settings>General>Usage>Storage>and under apps select FBM and try to delete it.
    Next:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Is it possible for the next IOS 6 update for the music album art to display on the homescreen as a backround image when music is playing?

    Is it possible for the next IOS 6 update for the music album art to display on the homescreen as a backround image when music is playing?

    It does, under certain circumstances. If you are playing music and lock the phone or it locks on its own, when you wake it up, the album art will show. It also shows as the background if you are in the music app. If this is not exactly what you are looking for, you can submit feedback to Apple about this feature at www.apple.com/feedback.

  • Buttons not responding correctly

    Help
    I am trying to get a simulation to work but I have problems
    with buttons not responding to actionscript properly.
    Here is how I have it layed out:
    I have a labels layer with 12 keyframes labeled scn2A,
    scn2B...scn2L
    I have a buttons layer with all of the buttons on it.
    The buttons layer has 12 keyframes.
    One button advance to the next frame, the other advances to
    the next scene.
    Each keyframe has the same buttons but different instance
    names. scn2DwnA_btn, scn2DwnB_btn...scn2DwnK_btn.
    The last keyframe uses a different button with an instance
    name of scn2Ok_btn
    here is the problem, when I test the movie everything works
    fine until the last frame.
    The DOWN button is used to advance each frame and then the OK
    button is used to advance to the next scene
    The down button has no script in the last frame but it is
    advancing to the next scene upon a mouse click.
    I would be glad to email source to anyone who would like to
    help.
    Thanks

    The code is just basic button code:
    scn3Ok_btn.onRelease = function...
    all code for each button is on a frame in an actions layer.
    each frame is a keyframe.
    So frame one actions would reference the instance names for
    the buttons in frame one of the timeline.
    Frame two actions would reference the instance names for the
    buttons in frame two of the timeline.

  • Spooler is not responding when trigerred smart form

    spooler is not responding when trigerred smart form . To trigger spooler request what are the authorization need to give to user.

    Please read this post then provide some details.  What printer model - there have been hundreds of Photosmart printer models over the last decade? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? Are there any error messages on the printer or computer screen?  What program are you trying to print from?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • ITunes not responding when I plug in my iPod

    Hey all, I need some help. Recently when I plug my iPod into my PC to update my iPod with the new music that I have loaded into iTunes, as soon as I do iTunes stops working and when I checked in my windows task manager under appplications/status it says iTunes is not responding. when my iPod is not plugged in, iTunes works fine. I can't get past this. Yes I did load the updated software, it didn't help. Does anyone have any suggestions?
    Thanks,
    Todd

    This is also happening to me updated latest version of Itunes. Itunes works fine but doesn't show the ipod when I attach. Tried most of the hints on the web site but nothing is working. Plugged the ipod into my base station and hey presto it works fine. I have also tried top re load the ipod software on the lap top but this isn't working either it asks for the ipod to be plugged in when it is plugged in it doesn't see it. Yet in windows explorer you can see the ipod is connected. Any idea's anyone. Shall i try to install version 6.0.0 of itunes instead of the latest version ?

  • Server not responding when connected to Internet

    ServerSere ever not responding when connected to internet

    Hi ..
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You may have to re enter your Wi-Fi password.
    If nothing above has helped, try here >  iOS: Troubleshooting Wi-Fi networks and connections
    iOS: Wi-Fi settings grayed out or dim

Maybe you are looking for