Media card not being recognized by Media Sync / Dekstop Manager or Windows

I hope someone can help me with this.
I've got a Bold 9000 running OS 5.0.0.411 (the Vodaphone offiical release, not the Bell one).  I'm on Rogers though.
I have an 8GB Sandisk card in it which the phone reads fine.
However, Media Sync, Desktop Manager, and Windows 7 64-bit wont read it.
I've done the following to try and fix this:
- Mass Storage Mode Support is "on", doesn't help
- tried reformatting the media card through the phone, doesn't help.
- tried reformatting the media card through Windows, doesn't help.
- tried uninstalling Desktop Manager and just installing the USB drivers, doesn't help.
- tried re-installing Desktop Manager, doesn't help
- tried updating the "RIM Blackberry SD USB Device" driver, no change as Windows says it has installed the right version.
- tried both versions of Media Sync (older and just released version), doesn't help.
- tried another SD card, doesn't help.
- under Computer Management > Disk Management, the SD card shows up, but with no drive letter assignment.  If I try to assign one, it doesn't work.  Basically if I check anything but "Properties", it tells me there is no drive there.
Does anyone have a suggestion to fix this or should I reload the older OS?  Admittedly, I don't know if even that will help because the last time I ran Media Sync on my phone was when I was running Vista so maybe it is not the phone but a Windows issue.
Any suggestions would be appreciated.  Been searching for the last two days and can't seem to find an answer.
Cheers.
BB-past: 9000>9700>9800>9780>9810>9900>Z10>Q5

Me too:
BB Pearl 8120 (OS 4.5.0.124)
Windows7 Pro 32bit
BB Desktop Mgr. 5.0.1
Reading/accessing the media card via USB always worked fine in XP, and still works fine in Ubuntu Linux (I could never get Bluetooth to do it at all). With the Windows7 upgrade, suddenly Windows can detect but not read the card. It's detected as a removable disk in Explorer, but when you try to open/browse it, Windows throws up a dialog that says "Please insert a disk into removable disk (F."
The phone sees it just fine, XP sees it just fine, Ubuntu sees it just fine. It's more likely to be a Microsoft problem than a RIM problem, but it's still friggin' annoying. Does anyone know a workaround for this? The Desktop Manager software won't run under WINE for me.

Similar Messages

  • My media is not being recognized by Final Cut! HELP PLEASE!

    My media is not being recognized by Final Cut it was there yesterday and today it is not recognized by FCPX
    it looks like this now>>> but it is I cans see it in Finder and Quicktime? HELP PLEASE!

    That's a compound clip. Not sure what you've done, but that's not a clip icon. Where did this media come from? How did it get into your computer? Is it really HDV? Was it captured using FCP?

  • SD Card not being recognized by ZTE Open (Firefox OS 1.0)

    The SD card is not being recognized by my ZTE Open (Firefox OS version 1.0). I tried taking it out, putting it back in and it still does not work. The SD card is brand new and works in all other devices. I only got the phone and the SD card today so I don't know if it is a hardware issue or if it is a issue with Firefox OS 1.0.

    Hello,
    After reading the information provided about your issue I suggest a soft reset of the phone.
    #Take the back cover of the phone off.
    #Take the battery out.
    #Take the SIM card and microSD card out (if applicable).
    #Wait 10 seconds.
    #Put the SIM card and microSD card back in (if applicable).
    #Put the battery back in.
    #Put the back cover back on.
    #Turn the device on.
    #Check if the issue you were having is still present.
    Please report back to us if this solved your problem!
    Thank you

  • T400 with Advanced Dock - Media bay not being recognized

    I have a T400 plugged into an Advanced Dock.  The media bay doesn't support the new SATA ultra bay devices, but I plugged in a DVDR drive from my old T60.  It fits, but I can't get the T400 to recognize that it's there.  Does anyone know how to make it work?
    Thanks!

    Me too:
    BB Pearl 8120 (OS 4.5.0.124)
    Windows7 Pro 32bit
    BB Desktop Mgr. 5.0.1
    Reading/accessing the media card via USB always worked fine in XP, and still works fine in Ubuntu Linux (I could never get Bluetooth to do it at all). With the Windows7 upgrade, suddenly Windows can detect but not read the card. It's detected as a removable disk in Explorer, but when you try to open/browse it, Windows throws up a dialog that says "Please insert a disk into removable disk (F."
    The phone sees it just fine, XP sees it just fine, Ubuntu sees it just fine. It's more likely to be a Microsoft problem than a RIM problem, but it's still friggin' annoying. Does anyone know a workaround for this? The Desktop Manager software won't run under WINE for me.

  • ESATA PCI Express card not being recognized

    I have a Macbook Pro Intel Core 2 Duo 2.8 GHz and I'm having trouble getting an eSATA PCI Express card to be recognized in either MAS OS X (10.5.6) or Win XP SP3.
    When I plug a FireWire PCI Express card into the slot with a drive attached it gets recognized right away but the eSATA doesn't.
    I can go into the system profiler when the card is plugged in and MAC OS X sees the card but the drive doesn't get mounted, or there is no prompt for me to initialize the drive (if it's a new, non-formatted drive). I've tried installing the driver that comes with the eSATA card with no change.
    Does anyone have any ideas as to what I can try?

    Does anyone have any ideas as to what I can try?
    Hi,
    Typically, this type of issue is caused by an incompatible enclosure or a card problem.
    Please provide a link to the card and the enclosure for additional help. If you need an ExprressCard/enclosure combination that works I would suggest FirmTek.
    http://firmtek.stores.yahoo.net/sata2ensm2e.html
    http://www.amug.org/amug-web/html/amug/reviews/articles/firmtek/2en2/
    Have fun!

  • Micro SD card not being recognized

    I've installed a new MicroSD card into my Nokia Lumia 822. I turned on my phone and it doesn't recognize it. So I take it out and put the SD card into my computer and format it to NTFS and return it to the phone. The phone says something like, "This SD card is not in the correct format to be used. To format do Steps 1 and 2" Ok! I have the phone format it and when it's done, it doesn't see the card. To further troubleshoot, I took the SD card out of my old smartphone and install it into the Lumia 822 and it doesn't recognize it.
    Anyone else having this problem?
    Or
    Anyone know the solution? Or is the solution to have them replace the phone?
    Burningham

    So, what worked, but was a lot of wasted time? 
    - You removed any microSD card from the phone, then tested all three computers and all three computers will see the 822's on-board/internal memory storage and you can transfer files from any of the computers to the phones' built in storage. 
    - Second:  Then you put a microSD card in the computer while connected to the phone, and then you can move the files from the phones built-in storage to the microSD card.  (Deleting them from the internal storage on the phone?)
    - Third: Then when you put the microSD card back into the phone, and the phone does access the microSD card and reads the files.
    Is this what works for you?  Did I write it correctly?  Are you sure the files you are reading are on the microSD card and not just the ones in the internal memory?  Did this work with all the cards, newly formated and not?
    Thanks for the information.
    Is Verizon addressing this?

  • SD card not being recognized

    How do you I get my Tungsten E2 to recognize an SD card?  I have tried it with a standard SD card but it still says there is no card in the slot. What do I do?
    Post relates to: Tungsten E2
    Message Edited by FNG1 on 01-28-2010 09:31 AM
    This question was solved.
    View Solution.

    The following Palm KB article lists the maximum card size for Palm devices:
    http://kb.palm.com/wps/portal/kb/common/article/34​080_en.html
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • SD card not being recognized - DROID Charge

    This error has happened to me too.  Has anyone got a definitive answer as to whether this is a phone ("Charge") issue?   My memory card just stopped working.   When I pull it, use an adapter, and stick it into my laptop I can read it fine.  I've backed up everything on it.   However, if I put it back in it doesn't work.   I've pulled the battery.   It still doesn't work.   I reset my device back to factory settings ("Grrr.. because I lost a lot of apps and customizations"), and it still doesn't recognize the card.   I went out and bought a brand new sd card (SanDisk Ultra 32 GB MicroSDHC Class 10 UHS-1) and it still doesn't recognize the new one.   
    Does anyone have any other options instead of having to buy a new phone?   I like the Samsung Charge, but so many of the apps I use weekly, if not daily, require a memory card even to work.
    <Branched to a new discussion for more exposure.>
    Message was edited by: Verizon Moderator

        Hello JChambers,  I appreciate you taking so much time and effort to troubleshoot the device!  I apologize for the delayed response.  I would like to take a closer look at your warranty options and work towards a solution.  I have sent you a Follow request.  Please accept and send me back a Direct Message with your account information.  I am eager to get this resolved!
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • AirPort Extreme Card not being recognized

    I installed an AirPort Extreme Card into my powerbook G4 15" laptop. I also installed the software from the CD that came with the card. Everything went just like the instructions set out. When I start my computer and go into the system profiler it doesn't show that I have an airport card installed. Also if I launch the AirPort Setup Assistant it claims I have no card installed.
    How can I determine the card is installed correctly and working?

    Which PowerBook G4 do you have?
    Some PowerBook G4s require the original AirPort card.
    Others require the AirPort Extreme card.

  • SD Card not being recognized by macbook air. what do i do?

    I have a Nikon D5100 and i was taking some photos and videos outside. so like any other person, i put in the sd card into the slot, but it doesn't recongnize the sd card! this is really annoying me. also, the camera-to-computer usb isn't working either! it was just working last week so what's the problem?

    Another thing that might help is to open the Image Capture app.
    It is in your Applications folder.  You might try opening the app yourself, then inserting the SD card.

  • My ipod nano is not being recognized by my laptop

    dear apple community users,
    when i connect my ipod nano to my lapto (hp) it shows the charging sign but it is not recognized by the laptop.
    i have tried turning it on and off may times but has not helped
    i have the latest version of itunes on the laptop but due to this problem i am not able to sync the music files from the laptop
    plss help and reply asap

    Good Morning lavanyaroy,
    If your iPod nano is not being recognized by your PC or iTunes for Windows, follow the detailed instructions in the article below:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    http://support.apple.com/en-us/HT204095
    All the best,
    Judy

  • My ipod nano is not being recognized by any power source:(

    My computer and power cord for electrical outlet is not causing any response from my ipod

    Good Morning lavanyaroy,
    If your iPod nano is not being recognized by your PC or iTunes for Windows, follow the detailed instructions in the article below:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    http://support.apple.com/en-us/HT204095
    All the best,
    Judy

  • IPhone 4s not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help

    iPhone not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help.
    When I connect iPhone to USB iTunes is giving me the above message. Please advise if you know the fix.
    Thanks,
    Lina1116

    did you find a fix?

  • My iPhone 5 is not being recognized by my iMac.  All my other devices, including iPod and iPad are recognized with no sync problems.  I've tried every approach with online help as well as an Apple advisor by phone.  Help?

    My iPhone 5 is not being recognized by my iMac.  All my other devices, including iPod and iPad are recognized with no sync problems.  I've tried every approach with online help as well as an Apple advisor by phone.  Help?  Any other suggestions other than going to an Apple Store?

    Back to life**
    Oh I know there are many other vocabulary mistakes but never mind them I was just too excited when I wrote all of that while typing very quickly
    P.S: if you have any question then ask and please do tell me if it works or not with u but I'm definitely sure it'll work so tell me this and we'll get excited together
    Also if you have an experience to share then do share it as well please.
    Peace

  • My iPad is not being recognized by the computer, therefore, cannot sync.  It charges when plugged to the wall, but not when pugged to iMac.

    My iPad is not being recognized by the computer, therefore, cannot sync.  It charges when plugged to the wall, but not when pugged to iMac.

    Most common culprits include the cable. Try swapping it out for a different one.. or not having the most recent version of itunes. I once even solved this problem by shutting down the computer for 2 minutes. (the longer the better), with the ipad plugged in. starting it up... then itunes recognizes it, launches, and syncs.
    Apple has a troubleshooting assistant on this topic:
    http://www.apple.com/support/ipad/assistant/itunes/
    It will advise you to reboot. I recommend shutting down instead.
    --Sam
    P.S The ipad should charge when asleep and plugged into your Mac. The charging behavior is normal. There isn't enough power out the USB ports to charge the ipad while it is on on some older Macs and nearly all PCs.

Maybe you are looking for