Media card reader not reading in usb port

Usb problems? or is something set wrong? any thoughts?

Did you ever get your issue resolved? I'm having the same problem using a Targus card reader. I have used it for over a year. It has worked perfectly until the last few weeks. Today, we purchased another card reader. Iphoto still will not recognize it.

Similar Messages

  • Media card wont read on phone or PC. "Media card can not be accessed due to fatal errors"

    I've had my blackberry curve 8520 for over a year and never had any problems with the media card until now. I'm unable to look at any pictures, videos or music on my phone as i can not install the media card on my phone. I'm unable to repair it and format it also. The media card will also not be read when I plug it into my laptop with the USB. 
    I definitely know its the media card and not my phone itself as I've tried my brothers media card in my phone and it worked perfectly. When i put my media card in his phone, it did the same thing and came up with the same error.
    Does anyone know how i'll be able to make the media card read in my phone or my pc so I can backup the data as I don't really want to lose it all?
    Any help appreciated,
    Thanks! 

    From what you describe, the data that was on the media card is already gone. If the PC cannot read it and the BB cannot read it, then it has for some reason been fried. I'm sorry for your loss.
    You can try PC-based recovery utilities, but typically with flash memory (as opposed to magnetic memory of hard drives), once the data is gone, it's gone for good. But, you never know...give some of those a try and see what happens. Before you ask, no...I've no guidance for one versus another.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to read a data from USB port using JAVA

    hi all,
    i need to know how to read a data from USB port using java. any API are available for java ?.........please give your valuable ideas !!!!!!!!!
    Advance Thanks!!

    You can do this. Please use this link
    [http://www.google.co.in/search?hl=en&client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&hs=uHu&q=java+read+data+from+usb+port&btnG=Search&meta=&aq=f&oq=]
    What research did you do of your own? Have you done some testing application and tried yourself??

  • My sim card will not read on my new iphone 6 why?

    please help my sim card will not read on my iphone 6 and i cant pass the welcome screen

    have you tried removing it and re-inserting while the phone is switched on?

  • XP PC Does not see Media Card. Device Memory and Media Card are not available.....

    I am starting a new thread because the old one was marked as resolved and it isn't.
    My Windows XP desktop is no longer seeing my BB Storm Media Card. I am getting the error:
    "Device Memory and Media Card are not available because the Mass Storage is currently in use."
    I have followed these directions:
    Options > Memory >
    Media Card Supoport - ON
    Media Transfer Protocol (MTP) - ON
    Mass Storage Mode Support - ON
    Auto Enable Mass Storage Mode When Connected - YES
    SAVE
    I have application free pace 8.1 MB
    and the error message:
    "Device Memory and Media Card are not available because the Mass Storage is currently in use."
    The card is there and is seen by my BB Storm. Media > Explore
    I have removed and reinstalled the card.
    On the desktop I have tried Explore as well as Disk Management and nothing shows up for the Media Card although the Blackberry itself is present.
    Please help.

    Hi there!
    Give this KB a try perhaps?
    KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Media card can not be accessed due to fatal errors and media card format failed

    hi
    anybody please help me. when i insert media card in blackbeery 8520 mobile i am getting the below message.
    "media card can not be accessed due to fatal errors" and
    when i try to format the media card on mobile i am getting the following message.
    "media card format failed"
    i tried to connect this media card to PC. but PC not showing any message and not even displaying the card in "my computer" folder.
    i have some important files on the media card.
    can some please help me to clear this problem and get my files.

    mrvonzuela wrote:
    Help Guys! please!
    Hi mrvonzuela,
    On your BlackBerry® smartphone, go into Options > Device > Storage, remove the check mark next to Media Card Support then press the menu key and choose save.  Place a check mark in the Media Card Support box again, then press the menu key and choose save.
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • HT1529 MY DONGLE IS NOT DETECTING IN USB PORT

    Sir,
    1. My dongle is not detecting in USB port; what to do?
    2. How I can go to My Computer (like Windows) so that I can see filing system memory status?
    3. For extending warranty what is the process?
    Regards,
    Subrata Dey

    Assuming yu have a PC try:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod: Does not appear in Windows or iTunes and Device Manager is empty

  • Hp pavilion dv4-1123us Media Card won't read

    I have a hp Pavilion dv4-1123us laptop that won't read a 16 GB SDHC media card. The card works in my PC, so the card is good. I have a Scandisk 5-1 media reader hooked to my home PC that would not read it but I found through Scandisk site I needed to download the latest Firmware which I did and now the card works on my PC. The reader has always and still does read a 512 MB and a 2 GB XD cards on my laptop. I am running XP Pro OS.
    I have searched the HP site for driver downloads but only see them for Windows 7 and 8 not XP.
    Can someone help me on this?

    Hello wgray826,
    You’re having a problem not being able to read a 16GB SDHC card.
    I think that your computer does not support the SDHC card.
    Here is a link to your user guide and what cards it supports.
    I noticed that it shows the Secure Digital but not the Secure Digital High Capacity.
    Clicking the White Kudos star on the left is a way to say Thanks!
    Let me know how everything goes.
    Have a good day.

  • Card reader not reading

    I have a Mid 2010 Macbook Pro. My SD card reader is not reading the SD card from my camara.
    Please help!

    Buy an external card reader that connect by USB. The one inside your Mac has failed and the only way to fix it is to replace the logic board.

  • MEDIA CARD CANT BE READ DUE TO FATAL ERRORS

    Hi, I took my blackberry 9630 tour to the repairers to fix my trackball because it wasn't functioning. They fixed my trackball but the problem is when I insert my media card on the phone, I got a message sayng "media card cannot be accessed due to fatal errors" and I got shocked because the card was working before they opened my phone. Can someone please help me get back my 700 music files and pictures because they are important :'(

    Hello, Archie42,
    To better determine if the issue is being caused by the media card or the BlackBerry® smartphone,  I would suggest testing the media card in a PC, if the card is working transfer the files to your PC and then reformat the card and then test in the BlackBerry.
    I hope this helps.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • SD card driver not reading

    My Sony vaio is not reading my SD card from my camera. I installed the software updates and it didn't do anything. I checked under devices and drivers and it says the software is working.. but it's not. The SD drive has worked before, so I don't understand why it stopped. Any suggestions? Thanks.

     
    Hi anasellares
    Thank you for considering Sony Community! 
    Reformatting the computer will just reinstall the Operating System back to its original factory settings. It will reload all pre-installed applications and drivers. All third-party applications you installed will be deleted. And all software issue should be resolved. You have the option to do this right away but creating a backup is a must. The links above are combination of U.S support and non-U.S. support links. To isolate the issue, kindly try these steps:
    Power Cycle - Remove the battery and all peripherals -> press and hold the power button for 5 seconds OR, if the battery is not removable, remove all peripherals-> look for a battery off button on the bottom of the laptop -> push the button for 5 seconds
    Reset BIOS. 
    The drivers and software that support your computer are on this link: VPCSE13FX 
    Take note of the card that your unit can accommodate: 
    ❑ "Memory Stick Duo"
    ❑ "Memory Stick PRO Duo"
    ❑ "Memory Stick PRO-HG Duo"
    Just in case you are decided to format the unit, please follow the steps here: System Recovery from outside of Windows. (Steps 1,2,9, skip rescue, 16).    
    For further assistance, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/. 
    Hope these options help. 
    Regards,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"

  • My sim card will not read in my new3 iphone 6 why?

    i have put a the sim card that comes with the new phone into my iphone 6 but its not reading it and i can not get passed the set up page

    have you tried removing it and re-inserting while the phone is switched on?

  • Programmatically read list of Windows USB ports

    Want to be able to programmatically search all open USB ports for a specific piece of hardware.
    Hope to start by only "pinging" the ports that Windows lists as open and used in Device Manager.
    Suggestions??

    devcon

  • Q10 connects to Media Card but not Device (Photos, Documents, etc.)

    Okay, I'm having a doozy of a time trying to figure this out. I've tried seven ways to Sunday and it's just not working the way it should.
    In the past, with BB Pearl, Curve ,and Bold, the device always connected upon USB contact with my computer... I could access photos I had taken and saved to the device as well as photos I had taken and saved to a memory card.
    Now, it isn't connecting right. If the Mass Storage option is turned on, I can access photos on the memory card (on my computer, it's the F drive)
    Oddly enough, the few times it has connected right, they show up as the Y and the Z drives. The Y drive is the memory card and the Z drive is the deivce drive.
    I thought I had it figured out, that if I wanted to access the device, then I had to have the mass storage turned to off and if I wanted to access the memory card, I'd have to switch it to on.
    It was working that way yesterday. I connected it to my computer and wala, everything connected, and it started backing it up right away.
    Today, nada.
    I've tried multiple USB cables and they're all working fine. Currently, I'm using the USB cable that came with the Q10.
    It doesn't matter if the bluetooth is on or off and it seems to require that the method of accessing documents is to connect by auto detect (vs connect to Windows) in the storage/media access.
    Sometimes when I plug it in, both old and new version of BB desktop pop up (BB Link and BB Desktop) The Desktop detects that it's connected to a Q10 but that there is no support for it.
    Could it be that I need to uninstall BB Desktop, maybe there's a software conflict in there somewhere?
    I just can't get it connect consistently! Help!
    Thanks!

    Hello scarlett 67,
    Sorry to hear you are having issues connecting to your BlackBerry® Q10 smartphone to your PC.
    To clarify does your and the PC recognize that the BlackBerry® Q10 smartphone? If so, there should be two drives that are recognized in My Computer; Y drive which is your device memory and X drive is your media card. Ensure to open both the photo and camera files on the X drive to search for the pictures that are saved on your media card.
    BlackBerry® Desktop Software and BlackBerry® Link should function successfully on the same computer. Check out this article for more details. 
    Please let us know if you are able to successfully access your media card on your computer.
    -RoundBrown
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • Ipod Touch not recognized by USB port on my new radio! PLEASE help?!?!?

    Ok, so I just bought a new radio for my car so I can listen to my ipod touch 2nd gen (with the latest 3.0 software) through my speakers. Ok, that's all great, but the problem is that when I connect my ipod touch through the USB port on my new radio, it reads "device error"...
    My radio is an Alpine CDE-102. It does have an AUX input, and I can easily get a cable to fix this problem... but I'm wondering why my ipod touch doesn't show up through the USB?!?! And I don't know how AUX input sounds compared to USB input (probably less quality than the USB...)
    So, can you help me? I've also connected my ipod touch to my xbox 360 and it shows up as a camera - can't play music... all part of the same problem I guess...
    This is a SERIOUSLY annoying problem especially since I just dropped some cash on the new radio which might not even WORK!!! AHHHHH! A problem with the USB cable? Problem with the Ipod? Problem with the stereo? I'm not quite sure what to think...

    That is the ONLY cable that will work with that radio:
    http://www.alpine-usa.com/US-en/products/product.php?model=CDE-102&view=Specs
    From reading the manual for your iPod I'm pretty certain the connector is on the rear of your unit.
    You can connect an Auxiliary cable to the headphone out on your Touch to the AUX in on the radio but you will have to control everything with the iPod and it will not charge.
    The cable is $30, why don't you ask how much they would charge you to install it?

  • Aluminum Keyboard Sometimes Not Recognized By USB Port

    I have an Aluminum wired keyboard that occasionally isn't detected by my Macbook in both Windows XP (Boot Camp) and Leopard. This is an exchanged one because the first one also behaved this way. I'm not using the extension cable. I have a USB wireless mouse plugged into one of the keyboard's USB ports and a flash drive. When the keyboard isn't detected, the mouse doesn't work (no lights on the receiver, can't connect), but the flash drive gets recognized. I've also had the keyboard not be detected without the flash drive so I know that it isn't the issue.
    When it isn't detected I have to disconnect and reconnect the keyboard multiple times until it randomly starts working. Once it works, it doesn't stop working, though after going to sleep it occasionally disconnects itself on startup. All the function keys work properly and there's no updates available...is there anything I can do about this?

    I've seen the very same problem. In my case I have a wired Mighty Mouse attached to one of the USB ports on the aluminum keyboard. Every time I plug it in -- not recognized first time. Second time -- success. Highly annoying.
    Unfortunately I don't have a solution for the problem.

Maybe you are looking for

  • Using a variable in Spry conditional tests included in a Spry Tooltip

    I have the following code: <div spry:region="company" id="tooltip"> <div spry:repeat="company" spry:choose="spry:choose"> <div spry:when="'{name}'==memberName"> <table> <tr> <td align="center"><h2>{name}</h2></td> </tr> <tr> <td align="center"><img s

  • Can't get WiFi to work on E1200

    My 1200 v 1.0 was working fine until I tried to link a wireless internet camera. Apparently I screwed something up in the setup such that I've lost my WiFi connection to my laptop and one wireless desktop. Fortunately my wired connection still works.

  • Aspect Ratio / Anamorphotic Movies

    Hi We have a number of movies that come from DigiBeta or DVD. They have non square pixel aspect rations. We've encoded them into MP4 Files. Players like QuickTime or VLC correctly recognize the aspect ratio and distort the display accoringly. But in

  • Could not display output in PDF format from a RDF file

    Hi all, I'm calling a report file (.RDF) from the browser using RWCGI.EXE, and specified the output in PDF format, but it always asking me to download the active-X for the PDF file generated by the report. I have Adobe Acrobat Reader installed on my

  • Error in Simple Stored Precedure!!

    Hi Folks, I am new to oracle...At present i'm working in MS SQL Server...I am trying to write a small stored procedure which retrieves a result set(ie rows) from a given table in Oracle 8i.I have written a procedure as create procedure test is begin