Media center problem with Qosmio G35-650 - error message

hello all
I have a problem with media center on qosmio g35-650.
When starting live tv , an error message appears and writes "application failure please restart your computer again. if problem persists again please contact with your hardware assistance"
It was working yesterday and today something happened.
Also it cant find any tv signal available. Is it a hardware problem?
regards
cem mete

Hello
Please dont be mad on me but in most cases is the user the problem and not the machine. I really dont know what is problem in your case but if the unit has well TV signal there should not be any problem.
Your unit must be an US model. Those notebooks are not known to me but I presume that Qosmio player is preinstalled too. I have G20 and TV works perfect (WMCE and Qosmio player). What is with Qosmio player in your case? Does it work well?
Be sure that TV tuner is listed properly in device manager and also TV antenna is connected properly.

Similar Messages

Windows 8.1 Pro with Media Center - Problems with Activation

Hello.
I was one of those who tried Windows 8 early and got a Windows Media Center key for free.
Today through Dreamspark Premium I got a Windows 8.1 key.
I normally used my new Windows 8.1 key and Windows 8.1 were activated successfully and because I remembered I had a Windows Media Center into my e-mail archive folder I used it in "Add features to Windows 8".
Windows accepted the key, added Windows Media Center and rebooted.
After the reboot, Windows 8.1 got deactivated and it won't accept my genuine Windows 8.1 Pro key.
I do not wish to format my pc or re-install everything . I just want to activate my Windows 8.1.
I do not care about Windows Media Center, I just want to activate them with my genuine key.

Hi,
Based on the current situation, I would like to suggest you to contact Microsoft Product Activation Center by telephone to verify the product key and activate your system.
To start the Product Activation Wizard, follow these steps:
1. At the Start screen, swipe in from the right side, or hover your mouse in the upper-right corner of the screen to display the charms menu.
2. Tap or click the Settings charm.
3. Tap or click Change PC Settings.
4. If your PC is not activated, PC Settings will provide instructions that are customized to your activation error. If telephone support can provide help for your error, tap or click the appropriate link, which may resemble one of the
following:
a. Activate
b. Activate by phone
c. Contact customer support for help
For the detail information, refer to the following link:
How to contact a Microsoft Product Activation Center by telephone:
http://support.microsoft.com/kb/950929
Additionally, if the issue still persists, I suggest you contact Dream spark support for help.
https://www.dreamspark.com/Student/Support.aspx
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problems with iPhone 3G Activation , Error Message (-50), Need HELP!!!!!!!!

Hi,
I bought the iphone 3G yesterday through Virgin Mobile. I was told to activate my iphone I need to sync it with iTunes.
I plugged in my iPhone and it try to sync for a while then an error message pops up. (*We could not complete your iTunes Store request. An unknown error occured. (-50).There was an error in iTumes store. Please try again later*.)
I've tried several things, reinstalling iTunes, change the options in my internet browser (Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.5) Gecko/2008120122 Firefox/3.0.5), turn off my anti-virus software. But the problem still occur.
I can access iTunes store and my playlists etc, but when I click on Sign-in and then click on create new account the same error message pops up again.
I've tried to run diagnostics on iTumes. It says that secure link to iTunes store failed. I've passed all connectivity and sync test. Below is the details,
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
LENOVO 0658A22
iTunes 8.0.2.20
QuickTime 7.5.5
FairPlay 1.1.11
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.2.7
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number D763986FFBC26648
Current user is an administrator.
The current local date and time is 2009-01-16 00:15:20.
iTunes is not running in safe mode.
Video Display Information
Mobile Intel(R) 945GM Express Chipset Family
Mobile Intel(R) 945GM Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {CF15D5A8-9110-4EEF-9AFC-3CC17DD113AE}
Description: Intel(R) PRO/Wireless 3945ABG Network Connection - Packet Scheduler Miniport
IP Address: 192.168.1.4
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Fri Jan 16 00:09:58 2009
Lease Expires: Fri Jan 16 01:09:58 2009
DNS Servers: 192.168.1.1
192.168.1.1
Adapter Name: {F7421B4F-64B7-47A9-BFDD-A004DE5F7FCB}
Description: Broadcom NetXtreme Gigabit Ethernet - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server: 255.255.255.255
Lease Obtained: Fri Nov 07 17:38:56 2008
Lease Expires: Tue Jan 19 13:14:07 2038
DNS Servers:
Active Connection: LAN 連線
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was unsuccessful.
An unknown error occurred (-50).
Secure connection attempt to iPhone activation server unsuccessful.
An unknown error occurred (-50).
Last successful store access was 2009-01-16 00:10:18.
** iPod/iPhone Connectivity Tests **
iPodService 8.0.2.20 is currently running.
iTunesHelper 8.0.2.20 is currently running.
Apple Mobile Device service 2.12.33.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
iPhone, running firmware version 2.2
Serial Number: 878514GXY7K
** iPhone/iPod Touch Sync Tests **
Sync tests completed successfully.
Anyone have an idea of what's happening please let me know. I really want to start using my iphone.
Thanks heaps
Bec

No need to SHOUT. The cable is the one used to connect your iPhone to your PC. Suggest getting another one.
The problem may be that you're using USB to connect to the internet. It's too slow and will cause problems when you have other high speed USB connections. Use an Ethernet connection to your modem/router. For additional troubleshooting, see these Apple support articles:
http://support.apple.com/kb/TS1495
http://www.apple.com/support/iphone/troubleshooting/
Message was edited by: modular747

'A problem with the cooling system' error message on Satellite A660

Hi all,
Hope I can get some help here. I've had about 5 HP laptops after all of them had problems and faults. I got sick of them and therefore got a refund and bought a high spec A660-1FH.
The A660 has been a great laptop for two days until yesterday when I started getting a warning message saying 'A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service'.
The cpu fan works fine as you can here it spinning and the temperature of the i5-460m processor is around 40 degrees for both cores - which seems normal to me. I've noted that it happens only when running on battery and if you switch from eco utility to power saver mode. Its fine when running on the 'balanced' power setting. The fan is louder before when this message appears.
As its under 28 days my retailer swapped it for a brand new one straight away. Got the new one home, and the same message appears again. Has anyone else experienced this. As two laptops have had this, I'm wondering if this is normal for the A660 series laptop or if there is really a hardware issue?!
I have tried to upgrade eco utility and the bios of the laptop but both are the latest versions. Can anyone help or share if they experience a similar issue with their laptop?
Thanks

In front of me I have Satellite A660-13Q (PSAW3E) and I have it about 6 weeks now. It runs almost 10 hours daily and until now I didnt notice such message or anything else that can be suspect for hardware functionality.
I really dont know why this happen on your notebook and dont think there is anything you can do about it.
I would exchange it again. What you can also try is to contact nearest Toshiba service. Make a call, explain the situation and ask if they can help you with this.

Problem with file opening and error message

Hi there,
In CP 7, I am having a problem opening a file adn was wondering if anyone else has had this and whether the file was recoverd effectively or at all...
See message below
Cheers
Rossdo

Are you trying to open a CP8 file in CP7? If you are facing the problem with CP7 file itself, first thing you need to do is check whether you got any .lck file (lock file) in the source file folder, which indicates that the file was opened and not closed properly.
If not, try the method here:
Recovering the project « Rapid eLearning | Adobe Captivate Blog
Sreekanth

Numerous problems with X1 platform and error message RDK-03032

Daily I have problem with the X1 system where the TV signal goes out and I get a message that says " Call 1-800-XFINITY and reference RDK-03032." This problem is randum and can occur at any time of day, resulting in outages for many hours, or usually the remainder of the day. If I call Comcast customer service, usually the wait is usually about 20 minutes before someone comes on and goes through another process of sending signals to my box, at which time they say they need to send a technician out. I then get a call from the technician who says he doesn't need to come out because the problem is with XFINITY's network, and that they are working on it. If I call back into customer service, I need to first make sure I have about an hour for the process because the customer support person has to go through the same diagnostic test of sending signals to confirm the system is down, before they will refer the problem back to a technician in the field. Usually during this diagnostic process, the technician puts me on hold for another 30 minutes, at which time the phone is hung up, at which time I have to start the process all over again. RDK-03032 problem continues to occur with no resolution and no one seems to be able to tell me what the problem is, or how to fix it, and no one in customer support knows how to fix this problem. I have no idea how to get this problem resolved. Does anyone have any idea?

awsomely sad / they put this item on the market and i would recomemmend you contact the fcc for a form to fill out a complaint asap as i will be doing as soon as i receive the letter in the mail , they say it is a latency problem . late is late but no show at all for hours on end is the new future. what is that suppossed to keep us victoms happy untill they can figure out what to do to cover theyre mistakes , now they are trying to replace the incoming signal which has left me with no services 10 times in 14 days , i watched a tech install a new cable from pole to house with 2 supervisors standing rigth there , when the 12th visit by a tech i explained my story and the tech said let me look out side 1 hour later after my services were cut off again the tech came to my door and told me the cable from my house to the pole was terrible and rotten and needed to be replaced again , i knew he was lying but it was after 7 pm and i had enough , i saw them a week or so before , as did the 2 supervisors , cut a brand new peice of the roll in his truck replace it with new ends , a totally new peice , so i guess the cable they are using only has a 2 week life expectancy or the tech was lying , which i beleive the tech wanted to get paid for the call , so he probably did but once again my xi service is not right still , when they get to far in they start lying because they are probably getting screwed for have to service this x1 numerous times , when i sit here and listen to the supervisors and techs tell me that the system is the problem and they are trying every 3 months to figure what the last program upgrade has screwed up for them and laugh jokingly it doesent give you to much faith in theyre ability to resolve any issues with this system face it we have no recoarse . over 200 hrs on the phone . i must have talked to every employee in the company even tom karinshank yhe ceo was contacted and after his rep sat there and picked appart evry thing i said got rude and now wont return my calls or emails they pass it to the next person , ????????????????????????????????????

Capture Problem with "escape" command and error message

Just got my Final Cut Express this week and I'm already having weird dreams about editing... I'm logging about 5 to 7 hours per night trying to figure it all out.
Anyway, my most pressing issue is that while I am in the "capture" window and I rewind my tape (a Panasonic PV-GS320) (also, running this on my macbook pro with system 10.5.2 just loaded) - I press "now" because that seems to be the easiest to start with and when I try to stop and press "escape" it won't stop. So I tried pressing option/esc and it stops but I get the following message: " The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape.
I have some ideas but I wanted to get started working out this issue. Thanks for any help with this all you FXC gurus out there.

I recorded this in dv widescreen which imports fine in imovie. I am importing in DV NTSC 48Hz. I've tried all the settings. I know I have to probably just find the right mix of settings. I've tried changing the settings in the camera to 4:3 and back to 16:9 but I guess if you record in widescreen, you are stuck with that format. But this is actually a DV not an HDV camera

Qosmio G35-650 - Do I loose my data on HDD?

Ok. I tried everything to repair an XP install on my Qosmio G35-650.
The recovery disk was a joke and wouldn't work...I decided to skip all of the DMI junk I read about and clean install a copy of XP.
Put the Raid drivers on a floppy and proceeded with the install. Setup would not install on the boot partition and gave me a "page_fault" error. I went into the bios and changed disk 0 to JBOD from RAID, disk 1 was already set to JBOD.
Reentered setup and at the point where you select the partition to install to only one partition was shown.
This was not a good thing as I backed up all of my data from the C: drive (Disk 0) to the F: Drive (Disk 1).
I went back to the BIOS and set Drive 0 back to Raid and started the Setup procedure over again.
Two partitions were showing this time but Disk 1 was not showing an F: drive designator.
The question. Did I lose all of my data on the second 100gb drive in the system?
Is my F: drive recoverable?
Help!

If you change the RAID settings, it will wipe the data. Generally all RAID systems wipe the data when they are created.
But you may have a chance to recover most of the data. There are data recovery programs/utilities that scan the HDD for file fragments and attempt to recover your files (at least the files that have not been overwritten yet). Search google for "Hard Disk format data recovery"
Why didnt you use the Recovery Disc? If the DMI is incorrect, you can simply download a DMI tool to update the product name to "Qosmio G35" or "Qosmio G30".
The tool can be found on the Toshiba America website.

I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unable to do so with my iMac. This problem started suddenly and the error message i get is error 5.7.8. Please Help

I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unablesend any email with my iMac ( i can recieve email) . This problem started suddenly and the error message i get is error 5.7.8. I have read the threads on line and went into settings, even created a new profile, nothing helps...Please advice..is this something to do with my keychain Access?

As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
Office for Mac forums

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Users with "metafile download failed" error message

Hello,
I am an Adobe employee working on the issues surrounding the download manager to download Adobe Reader.
The team is aware that some users are having difficulty downloading Adobe Reader due to an error message, "metafile download failed".
If you are one of the users having the problem of "metafile download failed" error message, please send me a private message with your email address so we can contact you.
Thanks,
-Yuko C.
NOTE: to send a private message, click on the User Name to go to their profile page and then use the link to send a private message in the Action panel there.

This is a copy of what was in the other area, I did not see this new post started, sorry.
Week 4 july 2011 reader, flash, shockwave downloaded ok from the download page.
Last week 18 july 2011 when I tried to download, that part of adobe site was down.
Later on in week and today, I am just getting the 'Metafile download failed' message at 33%.
Same new pc's on both occasions ( ie 7, windows xp sp3 behind corporate firewall )
Shockwave seem to download ok.
Reader and flash, instead of coming up with the DLM as previously, is trying to download a file ending .........gtbd_Aih.exe
Has Adobe changed something??
HELP
Jim

ITunes issues with Windows XP - crazy error message

I've been using iTunes with XP and have no issues for years now. Today, when I went to open iTunes I received a message that Windows was configuring iTunes for installation. I am unable to complete installation and I receive this message..."Error writing to file C\Program Files\iTunes\iTunesResources\pl.lproj\DevicePrefsPodcasts.nib\objects.xib.
Verify that you have access to that directory
Anybody have any idea what this is about, thanks.
When I cancel out I get a Problem with Shortcut box, Fatal error occurred during installation!

One more question though under Program Files-iTunes, I have multiple iTunes folders, labeled iTunes(2) and iTunes(4). Should I delete these or leave them alone?
I don't think they're any immediate cause for alarm if they're what I think they are ... have you done some system restores on that PC at some stage, Matt? If a system restore is done to a restore point "over the top" of an installation or upgrade of a program, sometimes the system restore will put program files dating back to the previous version back on the PC. By design, it doesn't want to overwirte existing files on the PC, so it renames the top-most folder containing the files it has put back "<Program name> (2)" or "<Program name> (3)" if there's already a "(2)" and so on.
(Because the installation database for the program doesn't realise that there are any such files in folders "<Program name> (2)" etc files on the PC, they generally don't get removed in the course of regular subsequent updates or uninstall/reinstalls of the program and they stay lurking around on the PC ... it's actually precisely the same phenomenon that we just exploited in order to convince the iTunes repair install to go through ...)

Issue with Dreamweaver - Server Busy error message

Hi,
Whenever i open Dreamweaver, i see "Server Busy" error message. I am unable to use the application due to this. Can you please help resolve this right away?
Regards,
Raghu

I am using Dreamweaver CC. This problem started after a recent update I think.
Operating system - Windows 8.1 Professional
Basic system config in case you need it - 8 GB RAM, 2 TB HDD, Intel i7
Regards,
Raghu
Date: Fri, 20 Dec 2013 11:18:44 -0800
From: [email protected]
To: [email protected]
Subject: Issue with Dreamweaver - Server Busy error message
    Re: Issue with Dreamweaver - Server Busy error message
    created by Nancy O. in Dreamweaver support forum - View the full discussion
Which ver and build # of DW?
Which operating System?
Do you use a testing server?
If so, which one and is it running?
   Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5948026#5948026
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5948026#5948026
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5948026#5948026. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

HT1222 How do I download itunes with a MSVCR80.dll error message?

How do I download itunes with a MSVCR80.dll error message?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
iTunes 11.1.4 for Windows- Tips for Unable to install or open - MSVCR80

Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.

Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.

JaillotJb wrote:
I download the iOS7 Beta even if I was not a developper.
if you downloaded it and are not a developer, then we are not allowed to help you here. sorry.

Media center problem with Qosmio G35-650 - error message

Similar Messages

Maybe you are looking for