Media Center Problems

I have a sr5413wm with many upgrades and one of them was a sabrent tv card sbt-tvfm and when i use media center on vista home premium 32 bit the sounds and speech are off by about 5 seconds. And i have the latest and only driver for the card and i believe it to be configuired correctly. How can i get to match up and get it how it is suppose to be.

If your computer is really old, maybe its time to re-install windows. I have no idea otherwise.

Similar Messages

Media center problem with Qosmio G35-650 - error message

hello all
I have a problem with media center on qosmio g35-650.
When starting live tv , an error message appears and writes "application failure please restart your computer again. if problem persists again please contact with your hardware assistance"
It was working yesterday and today something happened.
Also it cant find any tv signal available. Is it a hardware problem?
regards
cem mete

Hello
Please dont be mad on me but in most cases is the user the problem and not the machine. I really dont know what is problem in your case but if the unit has well TV signal there should not be any problem.
Your unit must be an US model. Those notebooks are not known to me but I presume that Qosmio player is preinstalled too. I have G20 and TV works perfect (WMCE and Qosmio player). What is with Qosmio player in your case? Does it work well?
Be sure that TV tuner is listed properly in device manager and also TV antenna is connected properly.

MEGA MPC 800k and Media Center problems

Just upgraded to the MSI MEGA 800k replacing the noisy old bax I was usung for my Media Center PC.
Currently having a TV recording issue. the system performs perfectly well recording if left alone, and you can watch the program being recorded without any problems either. However if the live TV is paused or I watch another program whilst recording the recording develops a stutter that makes it unwatchable.
After trying many fixes suggested by Media center forums, I think I've narrowd it down to one of 2 issues.
Either the HDD cannot handle all the the simultanious reading and writing required. (Seems unlikely as the system could manage it and the only difference was a seperate HDD for the OS)
Or its a conflict between the AGP graphics and the PCI TV tunner. Both are set to IRQ 15, which while this presents no conflict to be reported in windows I suspect that having to share the IRQ is causing the two cards to interupt each other and cause a stutter on the recording.
Is there any way to change the IRQ assigned through windows XP?
Anyone have any ideas on how to fix this?
Thanks
Neil

Using an ATI Radeon 9550, latest MCE drivers.
After switching to a SATA drive and creating seperate partitions I have reduced the problem to a point where it only stutters occasionally. But I would love to be able to change either the PCI or AGP IRQ allocation to see if this eliminates the problem. Any ideas?
neil

Windows 8.1 Pro with Media Center - Problems with Activation

Hello.
I was one of those who tried Windows 8 early and got a Windows Media Center key for free.
Today through Dreamspark Premium I got a Windows 8.1 key.
I normally used my new Windows 8.1 key and Windows 8.1 were activated successfully and because I remembered I had a Windows Media Center into my e-mail archive folder I used it in "Add features to Windows 8".
Windows accepted the key, added Windows Media Center and rebooted.
After the reboot, Windows 8.1 got deactivated and it won't accept my genuine Windows 8.1 Pro key.
I do not wish to format my pc or re-install everything . I just want to activate my Windows 8.1.
I do not care about Windows Media Center, I just want to activate them with my genuine key.

Hi,
Based on the current situation, I would like to suggest you to contact Microsoft Product Activation Center by telephone to verify the product key and activate your system.
To start the Product Activation Wizard, follow these steps:
1. At the Start screen, swipe in from the right side, or hover your mouse in the upper-right corner of the screen to display the charms menu.
2. Tap or click the Settings charm.
3. Tap or click Change PC Settings.
4. If your PC is not activated, PC Settings will provide instructions that are customized to your activation error. If telephone support can provide help for your error, tap or click the appropriate link, which may resemble one of the
following:
a. Activate
b. Activate by phone
c. Contact customer support for help
For the detail information, refer to the following link:
How to contact a Microsoft Product Activation Center by telephone:
http://support.microsoft.com/kb/950929
Additionally, if the issue still persists, I suggest you contact Dream spark support for help.
https://www.dreamspark.com/Student/Support.aspx
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

FX5900 Ultra and MSI Media Center Problems

Hi,
I've just got an MSI GeForce 5900 Ultra VTD256 card which came with MSI Media Center Deluxe II. However, when I try to install it, it starts the install and then gives the error "This is not a qualified MSI system".
Can you offer any help?
Thanks,
Karen
My system is:
Pentium 4 2.4Ghz
1Gb DDR RAM
Gigabyte GA-8PE667 Ultra
MSI GeForce 5900 Ultra
WD 160Gb RAID
Windows XP SP1

Quote
Originally posted by KarenH
Hi,
Thanks very much for the welcome to the forum!
I will try using \"O\" rather than \"0\" and see if that helps. Fingers crossed...
I didn\'t think that I needed an MSI motherboard to install Media Center - just the MSI video card? What I do wonder as well is that, since all of the first FX5900 Ultra cards are actually manufactured by Nvidia for companies such as MSI, is this why the software doesn\'t recognise the card as an \"MSI\" one? If so, I guess I\'m sunk...
Thanks,
Karen
I wouldn't know on that as I have a MSI board and vid card.I do have a media center from nVidia.If you update the drivers from nVidia, you should get theirs.Unless I am thinking of a different media center.
EDIT I was thinking of a different media center,my apologies.MSI's looks neat, I want one as well.

Windows Media Center problems

I AM HAVING THE EXACT SAME PROBLEM. EXACTLY THE SAME. I CANT ACCESS ANYTHING. WMC JUST KEEPS POPPING UP EITHER RANDOMLY OR WHEN I TRY TO OPEN ANY PROGRAM

I'd ask them over here.
http://answers.microsoft.com/en-us/windows/forum/winapps?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1390446906223
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

-------Media Center Problem fixing-------

This is work on my system: Control Panel ->Languages -> Special ->Select :English(US)
Sorry, if my translating is wrong, but I use hungarian WinXp.
The Force be with YOU!

Hi!
I'm suffering with this damned MC II. for months... I gave up few times...
I hope it will help! Kösz ))

Windows Media Center Has Stopped Working...

Since I first bought my Toshiba Satellite P305-S89151, I've received "Media Center has stopped working...A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available" responses. When I click on the Close Program dialogue box, I'm provided with an MS KB (KB 947464) article pop-up that is suppose to help me resolve the problem. IT DOESN'T!!! When I click-thru on the KB link, the MS Support site says they can't find their own KB page! Does anyone know how to repair this Media Center problem on Vista Home Premium (64bit)?
Thank you!
[email protected]

Satellite P305-S89151
Media Center has stopped working.
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available
I wonder if this one applies.
Error message when you repeatedly use a shortcut within a brief time frame to start the Picture Libr...
-Jerry

Can any one help me with CD/Audio disc playback problem on media center m8200n running Windows Vista

I have HP Media Center m8200n Dest top running WINDOWS VISTA HOME PREMIUM 32 BIT edition.It has MEDIA CENTER and MEDIA PLAYER. I experience problems with the computer being able to play CD music discs. What happens is that the Disc will play only for 63 seconds exactly and then stop playing the track, the player will then skip tracks, settle on another one, play it for a few moments and then skip to the end and then play nothing. It gives me an error message that it cannot read the disc. This happens with any and every standard store bought CD new or used. These CDs also do play on my laptop running basically same operating system. This happens whether I trying to Play a disc or burn the disc to the hard drive. The drives work great though as they do play DATA discs all the way through. MP3 discs play fine. It also plays the DVD movies with no problem. Windows media player doesn't make it work, also installed VLC player and REALPLAYER to try some other players and they also don't work for music, only DVDs. They all only produce 63 seconds of music play back from a disc. I've already tried Changing ENHANCEMENTS, UPDATING DRIVERS, UNINSTALLING THE DISC DRIVE and then re-installing back into WINDOWS but none of that helped. SYSTEM came with the integrated REALTEK HIGH DEFINITION AUDIO on the mother boad for multi channel playback options and I've downloaded those updated drivers again but that doesn't do anything. Thinking it might be a hardware drive problem I purchased a new LG BLU-RAY DRIVE/BURNER super multi drive which plays fantastic for any video format from Blu-Ray to regular DVD format with the Power DVD software but the machine is causing even this new drive to have the same problem with the audio and it cuts out playing the audio disc within the same 63 seconds running audio disc. . There seems to be a software glitch and I'm wondering if you can help. Also the sound card seems to work perfectly fine. I downloaded I-Tunes and copied over audio files to the computer via my flash drive and when I play those files from the hard drive, or even the sample windows media files which reside on the hard drive in MY MUSIC, all files play through perfectly, fully, and with great sound. Audio out jacks in back of computer work fine as also does the front head phone jacks upfront. Something in the software when playing a audio disc/file through the dic drives???? I've got hundreds of CD and it's a bummer not beng able to lay them through the system. Does anyone think moving from VISTA PREMIUM to a upgraded version like ULTIMATE or even going up to Windows 7 might solve problem??? What about the 32 bit verses 64 bit editions??? My system should be able to run in the 64 bit frame work also. THANK YOU in advance!!!

Hi,
All dimms work individually? Did you run a bootable memory diagnostic to determine the reliability? Did you run a diagnostic on the hard drive? I believe that your PC came with PC Doctor and that you can create a bootable diagnostic disk. Did you create that disk? Be sure to purchase memory dimms from a manufacturer that will stand behind their product with a guarantee such as Crucial, Corsair or Kingston. Buy directly from the manufacturer and they will stand behind the guarantee. Be sure that all of the dimms are identical. Use CPU-Z to determine that the specifications are indeed identical.
You have some options to consider once you can stablize your PC for updating the BIOS.
Locate a hard drive and use the HP external recovery media to build a VISTA system. -- safest method
Use a VISTA repair disk and at the command prompt try executing the HP BIOS update (Admin). -- safe
Try a bootable BIOS update process as suggested at this site. -- less safe but doable
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Premiere Elements cause problems with Windows Media Center while streaming to TV.

I was having the following problem:
The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
A user on the Windows 7 forum had the following possible cause and solution. His response was as follows:
I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
I tried the quick fix by un-installing Adobe Premiere Elements. The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
Is there another solution for this problem?

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

Hdmi sound problems with m9150f in media center

I am running a pavilion m9150f Q6600 vista 32 bit and GeForce 8500 gt graphics on a sony wega 55" lcd projection tv. Recently I have been having problems with media center sound. Recorded programs from standard channels (2-64) seem fine but hd channels (1341, for example) produce an error message stating "Unsupported Audio Signal. Please check device output." Which kills all sound from Pc. After shuffling through various output options, often returning to the original settings, and occasionally reinstalling devices or drivers, the problem is fixed. Then, seemingly at random, POOF!, error occurs again.I am at my wits end and am ready to throw my PC out in the street and hit it with a bus! Please help prevent its untimely demise.
Thank you.

Hi again
I have downloaded the Realtek sound driver from the Tosh page and unzipped it.
(I have chosen the driver for Vista!!! I suppose you use Vista???)
There is a folder called sound. Access this folder and run Setup.exe
But before you will start this procedure you could access the device manager (control panel -> computer -> device manager) and choose sound, video, and game controller. There you have to mark realtek AC and click on uninstall and reboot the unit.
After this sound driver removing you should start the new driver installation described above. (setup.exe)

Problems with Elisa Media Center (images quality)

Hi
I decided to install Elisa Media Center on my laptop. Everything works just fine, but only images from photo gallery are very ugly (I mean ragged). Don't know why, but when I play slideshow all of my photos, all of them are really bad looking. Just look.
This is screenshot from Elisa:
And that's how this image looks in original format (quality):

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

New EPG download problem in Media Center

I'm currently experiencing problems downloading the EPG guide in Windows 7 Media Center and Vista Media Center. Over the last 2-3 weeks, the guide download has stopped working on all of my computers in Vista and 7.
The error code is 34 and this is caused when Media Center cannot establish an connection to the internet.
I have to connect to the internet via a proxy server/webcache. I have contacted the network support people and they took network activity captures and
identified a problem with Media Center not respecting the proxy/webcache settings in Internet Explorer and hence it cannot download the guide.
Previously, this process has worked perfectly on the network and I am told no changes have been around the time the problem started.
This only occurs on a wired network. For the same computer connected via wireless on the same proxy/webcache, the guide sucessfully downloaded and Media
Center respected the proxy settings. There are multiple machines exhibiting this behaviour.
Is anyone aware of any changes Microsoft has made to the guide download process over in the last month or so which may have resulted in this sort of
behaviour as this appears to be a bug in Media Center.
Thanks
elyoh

My Windows 7 Media Center was unable to download electronic program guides for about a month and a half. I search all the websites and tried all the fixes to no avail. I have an always on internet connection. Tested my connection within
Media Center. I tried to reconfigure my TV. I tried alternate zip codes within my area. Nothing worked. First, I found that I had NRMBMCHandler.dll (9KB) missing from my ehome directory. (C:/Windows/ehome/NRMBMCHandler.dll).
I replaced the file using a copy from another computer.
Then I found on the Microsoft Developers website instructions on Recovering a Corrupted Guide Data Store.
1. Close Windows Media Center
2. Open Task Scheduler (Control Panel>Administrative Tools>Schedule Tasks)
3. In the console tree under Task Scheduler (Local), expand Task Scheduler Library>Microsoft>Windows>Media Center.
4. In the console window under Name, right click ObjectStoreRecoveryTask, and then click Run.
After that action is complete, open Windows Media Center. A message pops up telling you that the system has repaired guide listings and the listings will be downloaded. Check your recording schedule as the repair may have interfered with scheduled
recording.
After that, problem with EPG was corrected. No reinstall was necessary. Hope this helps others.

MSI Media Center Deluxe 2 Problem - Urgent!

i've just got my new fx5600 vtdr graphics card and when i installed MSI Media Center Deluxe 2 under windows xp including the latest patch available, all the text parts in the software are presented with rectangles.
now because i cannot read anything, i cannot use the program !
i use windows xp pro english version with local settings Turkey - Turkish, and the MSI Media Center Deluxe 2 seems to have Turkish support.
I tried to change the language of the program from Turkish which it automatically chooses to English but i coul not achieve.
How can i change user interface language of the program to English or how can i fix the problem ?

how it looks:
does anybody have an idea to fix this ?

Media Center Deluxe III problem...

hi there...
i have a megaPC (mega 865) and i have a problem when i want to see dvd's in Media Center Deluxe III. the image is always stoping, but if i try to use WinDVD our PowerDVD it work real good and the image don´t stop.
does anyone here have this problem?
can someone help me?
tankx in advance

Hello,
I have this same problem on my 180,winDVD and other runs properly.
Did you treid to record the FM, the file result is horrible, as a very old audio tape.
If you record FM with windows utility "magnétphone "in french it 's all right.
I sent a email to the french MSI support to explain these problems 2 months ago,phone several time, but he don't care because it seems that I am alone with this kind of problem...

Media Center Problems

Similar Messages

Maybe you are looking for