Media Coder Failing with MPEG2-DVD and H.264 Blu-Ray Encode

I am useing Adobe Media Encoder CC 2014 8.0.0.173 build.
I am a CC subscriber.
I am importing a Premiere Pro CC 2014 timeline.
I also have Premiere Pro CS6, Photoshop CC and CS6, Encore CS6, Lightroom 5, Indesign CC and CS6 installed. Just updated all apps from the cloud.
When exporting the timeline to MPEG2-DVD I get the failed status.
In the text note section this is the result: MXF decode error in "J:\Murray-Gross Wedding\CLIPS001\AA0068\AA006802.MXF" at frame 16339. Frame 16316 was substituted.
I had several frames substituted.
I tried both the Mercury Playback Engine GPU acceleration and I also tried the software only version.
The original footage is;
MXF File details:
Wrapper type: MXF OP1a (type: SingleItem SinglePackage MultiTrack Stream Internal)
File generated by: CANON, XF100
MPEG-2 422 Long-GOP
I was able to export the timeline to an avi file from Pro CC 2014. But P Pro told me that the export had failed. When I checked the folder though the avi file was there.
I am running Windows 7 home premium.
I need to make a DVD of this footage. And would prefer not to reformat the avi file I created. Thanks in advance.

Do you get encode complete with Errors or are you getting encode failed (no encoded file)? The reason frames were substituted is because the source file had errors or other problems. So during import, PPro and AME substitute bad frame with adjacent good frame and continue to import. But if there are way too many bad errors and source is too corrupted, it may not be able to import it correctly and won't be able to export. so let us know if you get exported file and you are just curious what the error message was or if you don't get encoded files going to MPEG2-DVD at all.

Similar Messages

MPEG2 encoding fails, but MPEG2 DVD and MPEG2 Blu-ray works

Hey friends,
Every time I try to export with the standalone MPEG2 format option in Premiere Pro CS4 the file comes out empty (0 bytes) and both Windows Media Player 11 and Adobe Encore 4.0.1 say that my machine lacks the necessary codec to play the file (although, I'm thinking that this message is popping up really just because the file is empty/corrupted. I'm running on Vista SP1). Nevertheless, if I export to the MPEG2 Blu-Ray format with not too dissimilar values, everything works fine. The MPEG2 DVD format also works, granted that's lower bitrate and resolution. So, what gives? Could it have something to do with the audio?
My source files are NTSC 29.97fps HDV 1080i .mpeg files, captured from DV tape.
Here are the settings I'm using with the regular MPEG2 encoding (which fails as mentioned):
NTSC, 1440x1080i, 29.97fps, 18.50 max Mbps, 48kHz MPEG audio, which gives me a final file extension of .mpg
And the settings for the MPEG2 Blu-Ray encoding (which works perfectly):
NTSC, 1440x1080i, 29.97fps, 30.00 max Mbps, 48kHZ PCM audio, which gives me a final file extension of .m2v with a separate .wav audio file
Anyway, any help would be appreciated. Did I just completely miss the boat on some well known MPEG2 audio encoding issue or something?
Oh, and my system is Core 2 Duo 3.33 Ghz 4 gigs of ram gigantic harddrive, etc. I'm fairly certain this isn't a hardware issue. The source files playback without hesitation and the rendering time is not overly long.

Since the destination is DVD, don't waste the time or resources to encode at HDV frame sizes. It will just have to be encoded again so that it will fit the standard def DVD frame size. Re-transcoding will significantly reduce final quality.
NTSC DVD:
720x480 with a PAR of 0.9
29.97 fps
"Best Practices" would dictate elementary (separate) video and audio streams (.m2v and .wav). Avoid multiplexed .mpg files.
"Easiest Practices" would dictate exporting from Premiere as an .avi file and letting Encore handle the transcoding automatically.

Trouble with FCP 7 and Share (for Blu-Ray)

I've done a bunch of reading in this forum this morning and I see that pretty much everyone agrees NOT to use the Share option within FCP7 for burning a blu-ray. But I haven't come up with an exact answer as to why. Until now I've actually had good success with this, although I have not compared it directly with a BD created in Compressor or Toast 10
That would be great to know, but more importantly for now here is my question:
I wanted to burn a BD from FCP7 using Share. The project is 1 hour in length and the export took 5 hours. When it got to the point of burning the BD it gave me an error message saying that the Blu-ray drive was in use by another program. My only option was to cancel the burn, and thus start all over again!!
However, checking the scratch discs it appears that the video and audio files were created. So the root of my question is... what can I do with those created files now? Can I put them into Compressor? How can I burn a BD from those files without having to go through the 5 hour export again?
Thank you very much!!
Eric

Hi Eric, here is a response a I just posted for someone else...
How odd that the BluRay disc using share will not play... I've used Share before successfully, except since I don't have a blu ray burner, I burned a AVCHD disc (which only plays on a BluRay Player).
Perhaps you took a wrong turn somewhere... What were your EXACT steps?
Do you have Toast? That may be another solution... Follow this thread on Creative Cow for that: http://forums.creativecow.net/thread/20/861769
Here is a tutorial on using Compressor (I have not watched, if it s u c k s, sorry): Compressor 3.5 Tutorial: Burning a Blu-Ray and/or DVD - YouTube
Here is the Kenstone tutorial for creating a AVCHD disc... perhaps it will shed some light in case you did something wrong:http://www.kenstone.net/fcp_homepage/burn_br_mac_superdrive_stone.html
Anyhow, hth...

Failure with mpeg2 dvd

I'm rendering the same sequence of about an hour to different formats mostly hd 1080p h.264 and pal to mpeg2 dvd so encore wont work hard to convert.
last days I cant get the mpeg 2 dvd to render, I keep getting errors/failure.if I render just mpeg2 it renders perferct.
so until I could ditch the DVD for good I realy need the AME queue with mpeg2 dvd for my workflow.
I hav'nt checked it but I'm sure it will export mpeg2 dvd directly from PP

the settings are done in PP
by the way if I switch to mercury engine softwere only it renderes but very
very slow
2014-05-19 22:52 GMT+03:00 SAFEHARBOR11 <[email protected]>:
failure with mpeg2 dvd created by SAFEHARBOR11<https://forums.adobe.com/people/SAFEHARBOR11>in *Adobe
Media Encoder (AME)* - View the full discussion<https://forums.adobe.com/message/6392014#6392014>

Media Recovery failed with error 1111

Hi,
on 10g R2 on Unix I have :
Media Recovery Start
Managed Standby Recovery not using Real Time Apply
Fri Jun 24 10:56:52 2011
Media Recovery failed with error 1111
From alert.log :
Errors in file /data01/oracle/mydb/admin/bdump/hhhh_17637.trc:
ORA-01111: name for data file 523 is unknown - rename to correct file
ORA-01110: data file 523: '/oracle/product/10g/db_1/dbs/UNNAMED00523'
ORA-01157: cannot identify/lock data file 523 - see DBWR trace file
ORA-01111: name for data file 523 is unknown - rename to correct file
ORA-01110: data file 523: /oracle/product/10g/db_1/dbs/UNNAMED00523'
Any idea ?
Thanks.

here is one test case, i ran into same issue. and reolved as below.
When Standby_file_management is set to “MANUAL” , if any data files added on primary database, These changes certainly won’t be altered in standby database.
After starting MRP process, it dies and terminated with the following errors.
Errors from Alert log file:-
Errors in file /oracle/app/oracle/admin/CC/bdump/cc_mrp0_22294.trc:
ORA-01111: name for data file 536 is unknown - rename to correct file
ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
ORA-01157: cannot identify/lock data file 536 - see DBWR trace file
ORA-01111: name for data file 536 is unknown - rename to correct file
ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
Errors from Trace file:-
MRP0: Background Media Recovery terminated with error 1111
ORA-01111: name for data file 536 is unknown - rename to correct file
ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
ORA-01157: cannot identify/lock data file 536 - see DBWR trace file
ORA-01111: name for data file 536 is unknown - rename to correct file
ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
ORA-01111: name for data file 536 is unknown - rename to correct file
ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
ORA-01157: cannot identify/lock data file 536 - see DBWR trace file
ORA-01111: name for data file 536 is unknown - rename to correct file
ORA-01110: data file 536: '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536'
ARCH: Connecting to console port...
Check out from SQL, Which files need to be recovered on standby database?
SQL> select * from v$recover_file where error like '%FILE%';
FILE# ONLINE ONLINE_ ERROR CHANGE# TIME
+536 ONLINE ONLINE FILE MISSING 0+
SQL>
On Primary check out for actual naming convention:-
SQL> select file#,name from v$datafile where file#=536;
FILE# NAME
+536 DATA/c/datafile/undotbs9.595.750444337
SQL>
On Standby check datafile name:-
SQL> select file#,name from v$datafile where file#=536;
FILE# NAME
+536 /oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536+
SQL>
Make sure still standby_file_management is set to “MANUAL”, After performing media recovery again can be enabled to “AUTO”.
Rename datafile from standby database:-
SQL> alter database create datafile '/oracle/app/oracle/product/10.2.0/db_1/dbs/UNNAMED00536' as 'DATA3/cc/datafile/undotbs9_595_750444337';+
Database altered.
Start the MRP Now:-
SQL> alter database recover managed standby database disconnect from session;
Database altered.
After creating the file, MRP will start applying archives on standby database.

Media Recovery failed with error 368

The following error occurs on standby database---
ALTER DATABASE RECOVER CONTINUE DEFAULT
Media Recovery Log x.0000008973.arc
Recovery interrupted.
Redo code 6 enountered during in-flux buffer recovery
Some recovered datafiles maybe left media fuzzy
Media recovery may continue but open resetlogs may fail
some error occurred during recovering in-flux buffers
Recovered data files restored to a consistent state at change 138445558.
Media Recovery failed with error 368
Please advice. Thanks in advance

Here you have the complete reference for the command
that you executed :
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_15a.htm#SQLRF00802
[email protected]
Joel P�rez

Transport of Transformation failed with RC= 12 and job: RDDEXECL cancelled in Target sytem

Gurus,
When i am importing the workbench request from dev to qty.
I am getting error : Program terminated (job: RDDEXECL, no.: 22321300).
Transformation contains only Endroutine.
Job log:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server xxxxxx were synchronized
The internal session was terminated with the runtime error UNCAUGHT_EXCEPTION (see ST2
Job cancelled.
When i see the dump it is througing errror at the method of following class.
CL_RSO_TLOGO_PERSISTENCY-CHECK_INITIALIZED
Could you please help. Thanks in advance.
Ashok

Hi Ashok,
In QA use program "RSTRAN_ROUT_RSFO_CHECK" to check and remove any inconsistencies for the transformations. After that again transport those transformations in new TR and import in QA.
Also you have to search "Transport of Transformation failed with RC= 12 and job: RDDEXECL canceled in Target system" by Dinesh Tiwari.
Check the reply of Fun Sébastien in http://scn.sap.com/message/13795238#13795238.

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?

Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694

Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program

Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program

Sorry I can't get the screen print to upload
It says
Mandatory Update Available
A Mandatory version of this application is available for download. Application can't continue without installing this version.
Application:     Acrobat_com
Installed version: 2.0.0.0
Update Version : 2.3.0.0
Download now                    Quit
Release notes ( this is blank)
After selecting 'Download Now' I get the following message;
     Download failed
     There was an error downloading the update. Error #16820
     Close

Putting a row into a pageable cache failed with error 9 and error message

Hi Guys,
I am fetting the follwoing message when the job is scheduled.
Putting a row into a pageable cache failed with error <9> and error message <Db::put: Bad file descriptor>
I read the forum and Manoj has suggested to one of the forum member to change the size of the Pcache setting through the server manager. But I do not see the setting there. can any one please let me know where exactly I can see and increase the size of the Pcache.
Thanks

Hi
I've had the same problem. We know from other (more meaingful) error messages that we ran out of space for the Pageable Cache, but we've just increased it by 50GB and still get the same error.
Anyone??
Btw i don't think you there is a setting for PCache size - it will just use all the free disk you have on the drive where you have located the PCache directory.
Richard

Upgrade from CS 5.5 design premium to CS 6 design standard with purchased DVD and valid serial #s

Why can't I upgrade from CS 5.5 design premium to CS 6 design standard with purchased DVD and valid serial nos?

Kkofron please make sure the CS5.5 serial number you are using is also able to be registered under your account at http://www.adobe.com/. You can find additional details on how to register your Creative Suite 5.5 serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

Restore with install DVD and Time machine backup that excludes system

Hi, I need restore my PB G4.
I backed up my data using TM but excluding all system files. Is there a possibillity to reinstall the system with the DVD and then rebuild the individual accounts using Time machine?

Yes, you have several options: (In all cases Mac OS 10.5 Leopard is required as previous OS X versions can not work with Time Machine backups.)
*Full Restore Via Migration Assistant & Time Machine*
You can use the installation DVDs that came with your Mac and reinstall Leopard (Mac OS 10.5). During the installation process you will be asked if you would like to Migrate data over from your Time Machine backups. The advantage here is that you start with fresh system software. The disadvantage is that you may lose many of the personal preferences/settings that had been established with the previous system. But this may be only a minor inconvenience to reestablish these. Depending on whether you choose to migrate your applications over as well, you may be required to reinstall any 3rd-party software or standalone Apple programs. Don’t forget to run Software Update once the initial installation is complete to bring your system up to date. Using Disk Utility at this point to repair any permissions issues is advised as well.
*Full Restore Via Time Machine Only*
Alternatively, you can use the installation DVDs to do a full system restore. Insert the installation DVD. When the welcome window appears, go to the Utilities menu and select “Restore System From Backup…” and choose the drive that your Time Machine backups are on. Then select the date of the backup you would like to restore from. This will completely erase your internal drive and restore your system to a relatively same condition it was in on the date of the backup you choose. (See this article for a list of files that TM does not restore, http://shiftedbits.org/2007/10/31/time-machine-exclusions/) The advantage here is that you retain many of the personal preferences/settings that had been established with the previous system. Additionally, no further installation of 3rd-party software is required. The disadvantage is that BECAUSE you retain many of the personal preferences, settings, and system files that had been present with the previous system, you run the risk of reintroducing problems you experienced with the previous installation, including any issues that necessitated the OS reinstall in the first place. Using Disk Utility at this point to repair any permissions issues is advised as well.
*Full Backup After Restore*
Bear in mind that in all cases Time Machine will perform a full backup after a full restore. This is normal. Time Machine will resume incremental backups after the full backup has completed. To view previous backups, Control-click or right-click the Time Machine icon in your Dock or Option-click the Time Machine menu extra and Choose "Browse Other Time Machine Disks," then select your previous backup volume. You will enter Time Machine and be able to browse your previous back ups and restore files. (http://support.apple.com/kb/TS1338)
Hope this helps.

Flash Player download keeps failing with lost connection and then gives up. satellite Internet connection

Win XP. Firefox 34.0.5 (latest)
The Flash Player download keeps failing with lost connection and then gives up.I am on a satellite Internet connection.
It seems to be extremely slow even when loading the installer which is only 1MB. Then when I run the installer and it starts to download the installation there are frequent messages about losing the connection and then finally gives up.
I have had problems with other software failing when I am on a satellite link. This is most likely because of the huge latency which may be taken as a link failure. Ping times are typically 800ms but can be 2000ms sometimes!

Hello,
The online shim installer, which you are using actually downloads and installs Flash Player silently in the background. If your satelite connection is experiencing latency issues it could result in the failure to download. Please try the full installer posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section.
Maria

Adobe prem / media encoder h.264 blu-ray jitters, flickers /w slow-mo

hello
using the Adobe Production Premium CS4 pack... hardware is not an issue, also all the latest updates are installed.. prem 4.2.1 (003), encoder 4.2.0.006
after export and authoring, we are having strange glowing flickers, and bad slo-motion effect playback
the problem seems to be consistent with slo-motion and time remapping, frame holds and especially when an additive dissolve is thrown in.
the edit's are far from saturated with these effects, but a simple frame-hold with motion-rotation and motion-scale occurring with keyframes. the problem also happens with something as simple as a 30% speed/duration added onto a clip..
the footage is captured and on a timeline at - 1440x1080 (1.3333) HD Anamorphic, 25fps (50i)
the export profile after edit is - H.264 Blu-ray - 1440 x 1080i 25 High Quality
i get the feeling the problem may be occurring as the footage is remaining as interlaced footage through-out and not being blended or discarded to progressive.
i have tried making the footage progressive on export thinking it might solve the problem, but it turns out there is no such thing as progressive HD PAL in media encoder and encore
i love adobe's workflow but we have never been fond of main-concept from the start with things like this, even Mpeg2-DVD exports come out softer than you'd expect
any thoughts, light or general directions on what to do to help figure out the problem would be great..

after around 30 small sample exports, builds and different renders... I have discovered the problem and am now on track to fixing it..
it turns out certain adobe effects such as 'lighting effects' do NOT work well with slo-mo or frame held clips.. upon taking this one effect off, the clip looks flatter and less dynamic in context of my edit, but the clip plays normally no matter what the export settings, codec or format..
what's hallarious is that these effects and edits export and author perfectly fine onto DVD through Mpeg2.. i guess they just flatten better etc.. i get the impression when Adobe started crafting their software for HD they just built on top of the normal effects etc they already had and expected them to work.. if only Premiere could get the updates, priority and attention Photoshop does..
again, i love premiere's work flow, i just can't see how they can put the word 'Pro / Professional' near this software...
many thanks all
Steve

PR and AME 8.1.0 Export H.264 Blu-ray Creates Malformed xmpses File

Posting this here in PR, but this also applies to AME. The bug report was coded to AME. The only symptom may be upon import to Encore. See issue and bug report in this thread: Re: Re: Encore won't import markers with bluray vid output from Premiere through Media Encoder
Bug report filed. This appears to affect H.264 Blu-ray exports from PR 8.1.0 directly or through AME 8.1.0. It does not affect MPEG2 Blu-ray. The only practical symptom identified so far is a failure of files to import to Encore without deleting the xmpses file, which results in loss of chapter markers. A possible workaround is to modify the xmpses file.
Has this already been identified as a bug? Are there any other consequences?

Hey Kevin -
Having this issue on my new PC. I posted this on the Encore thread too but figured I'd update this thread as well. Hopefully the fix is coming in the next update (8.1.1?) Interestingly, I'm using 8.0.1 right now and I'm in my first week using my new PC (switched last week from long time Mac user) and both projects I exported had this issue. What's strange is that on my PC when exporting projects to the H264 Bluray format I get the xmpses and and xmp file whereas on the mac I only got the xmpses file. Even stranger is that I never had this issue on my Mac and when I bring in a project that I just exported using my mac into Encore on my PC it doesn't give the "error parsing MPEG..." message and all chapter markers come in just fine. These exports were just from last week using the same version of Premiere (8.0.1) I'm using AME 2014.1 though on this new PC whereas I can't remember on my mac if I had updated it yet to 2014.1 I don't think I did. Can't remember and I already wiped and sold it. Anyway, glad to hear the bug has been isolated and hope for a fix real soon. Thank you!
Premiere 8.0.1
AME 8.1.0.122
X99 5930K 6-Core
32GB Ram
GTX 970
Windows 8.1 Pro
(total side note: I wish in the signature of posts every forum member could have stored their specs so it would automatically be on each post for reference. Random thought.)

Media Coder Failing with MPEG2-DVD and H.264 Blu-Ray Encode

Similar Messages

Maybe you are looking for