Media corruption found: Needs workaround

I find a data block corruption on one of the table(INDEX) :CDM.FACT_CLAIM_REINSURANCE
I tried to use DBMS_REPAIR to attempt a repair of the corrupted block, however it shows result as o: implies no corruption
Then I tried with DBVERIFY: It shows some block corruption ..seems to be media.
DBVERIFY - Verification starting : FILE = /oracle/datafiles2/edwc/AGGREGATE_DATA_03.dbf
Page 313303 is influx - most likely media corrupt
Corrupt block relative dba: 0x0644c7d7 (file 25, block 313303)
Fractured block found during dbv:
Data in bad block:
type: 6 format: 2 rdba: 0x0644c7d7
===================================
As the dbv output shows, there are no failed data but still corruption exists, implying a media corruption.
My question is:
Is there any work-around for the issue of media corruption, keeping in mind that the database is in noarchivelog mode and any operation using RMAN will not be possible.
Regards,
Frdz

The log clearly says, the object is of type INDEX. Can you please have a look on log file and the info regarding this extracted from database.
Will Index rebuilding resolve the issue?
=========================
With the information from the alert log the following details were gathered.
TSN = 15, TSNAME = AGGREGATE_DATA
RFN = 25, BLK = 313303, RDBA = 105170903
OBJN = 906126, OBJD = 906126, OBJECT = PK_FACT_CLAIM_REINSURANCE,
SUBOBJECT = SEGMENT OWNER = CDM, SEGMENT TYPE = Index Segment
Using the object number from the alert log file, the objects were identified. It was found to be an INDEX. Its base table was also identified.
OBJECT_NAME OBJECT_ID OBJECT_TYPE OWNER
PK_FACT_CLAIM_REINSURANCE 906126 INDEX CDM
INDEX_NAME OWNER TABLE_NAME TABLE_OWNE TABLE_TYPE TABLESPACE_NAME
PK_FACT_CLAIM_REINSURANCE CDM FACT_CLAIM_REINSURANCE CDM TABLE AGGREGATE_INDEX

Similar Messages

I have gotten the message The volume Macintosh HD was found corrupt and needs to be repaired. I don't have the discs. Help!

I received a hand-me-down MacBook Pro (mine was stolen). I tried to install a full backup from my Time Machine using Migration Assistant, it froze during the install so I force quit the Migration Assistant. Since then I have had to re-establish my administrator ID and password. I can now only boot up in safe mode, I get the message that my HD is full (only 8.67GB available out of 199GB), and to make matters worse I now get the message "The volume Macintosh HD was found corrupt and needs to be repaired". I don't have the install discs, and I'm not very tech savvy. Can anyone help me?

You can buy OS X 10.6 Snow Leopard Install DVD.
1-800-692-7753
Best.

The volume Macintosh HD was found corrupt and needs to be repaired

Hello there,
There's a problem with my MacBook.
Yesterday I've made a back-up, because I would like to reinstall everything.
But it doesn't work.
The laptop doesn't start up from the installation disc holding the C. Nothing happens.
When I open the CD via the finder and start the installation, it fails at some point. It gives an error that maybe the CD is dirty or something. That's not true.
I thought there was something wrong with the CD, but it's more then that.
I did the disk repair, and it said as followed: The volume Macintosh HD was found corrupt and needs to be repaired.
The problem is that I can't repair the volume, just because of the CD problem. It's really annoying, the only solution is to reinstall, but it doesn't work at all.
Can anybody help me?
Thanks a lot!
Bye

Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the Option key until the Install Disk shows up then click on the Install disk and then the arrow below it. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.

The Volume Disk was found corrupt and needs to be repaired.

The Volume Disk was found corrupt and needs to be repaired.How can i fix this problem.

AHT will not scan for or find bad disk drive sector blocks, it might tell you your SATA chip.... no it won't do that either.... <g>
In a perfect universe Disk Utility First Aid, run from another hard drive ideally, or lacking that run from DVD. The shift key is suppose to check the drive journal and directory for out of sync errors and delete and rebuild extension and other system caches.
But you might want to backup first, and you could install OS X on another drive for one thing, or try using Disk Utility : Restore tab to make a full system copy of everything to another hard drive.
Why not jus point to "Disk Utility startup"
http://support.apple.com/kb/TS1417

Recovery is repairing media corrupt block x of file x in standby alert log

Hi,
oracle version:8.1.7.0.0
os version :solaris 5.9
we have oracle 8i primary and standby database. i am getting erorr in alert log file:
Thu Aug 28 22:48:12 2008
Media Recovery Log /oratranslog/arch_1_1827391.arc
Thu Aug 28 22:50:42 2008
Media Recovery Log /oratranslog/arch_1_1827392.arc
bash-2.05$ tail -f alert_pindb.log
Recovery is repairing media corrupt block 991886 of file 179
Recovery is repairing media corrupt block 70257 of file 184
Recovery is repairing media corrupt block 70258 of file 184
Recovery is repairing media corrupt block 70259 of file 184
Recovery is repairing media corrupt block 70260 of file 184
Recovery is repairing media corrupt block 70261 of file 184
Thu Aug 28 22:48:12 2008
Media Recovery Log /oratranslog/arch_1_1827391.arc
Thu Aug 28 22:50:42 2008
Media Recovery Log /oratranslog/arch_1_1827392.arc
Recovery is repairing media corrupt block 500027 of file 181
Recovery is repairing media corrupt block 500028 of file 181
Recovery is repairing media corrupt block 500029 of file 181
Recovery is repairing media corrupt block 500030 of file 181
Recovery is repairing media corrupt block 500031 of file 181
Recovery is repairing media corrupt block 991837 of file 179
Recovery is repairing media corrupt block 991838 of file 179
how i can resolve this.
[pre]
Thanks
Prakash
Edited by: user612485 on Aug 28, 2008 10:53 AM

Dear satish kandi,
recently we have created index for one table with nologgign option, i think for that reason i am getting that error.
if i run dbv utility on the files which are shown in alert log file i am getting the following results.
bash-2.05$ dbv file=/oracle15/oradata/pindb/pinx055.dbf blocksize=4096
DBVERIFY: Release 8.1.7.0.0 - Production on Fri Aug 29 12:18:27 2008
(c) Copyright 2000 Oracle Corporation. All rights reserved.
DBVERIFY - Verification starting : FILE = /oracle15/oradata/pindb/pinx053.dbf
Block Checking: DBA = 751593895, Block Type =
Found block already marked corrupted
Block Checking: DBA = 751593896, Block Type =
.DBVERIFY - Verification complete
Total Pages Examined : 1048576
Total Pages Processed (Data) : 0
Total Pages Failing (Data) : 0
Total Pages Processed (Index): 1036952
Total Pages Failing (Index): 0
Total Pages Processed (Other): 7342
Total Pages Empty : 4282
Total Pages Marked Corrupt : 0
Total Pages Influx : 0
bash-2.05$ dbv file=/oracle15/oradata/pindb/pinx053.dbf blocksize=4096
DBVERIFY: Release 8.1.7.0.0 - Production on Fri Aug 29 12:23:12 2008
(c) Copyright 2000 Oracle Corporation. All rights reserved.
DBVERIFY - Verification starting : FILE = /oracle15/oradata/pindb/pinx054.dbf
Block Checking: DBA = 759492966, Block Type =
Found block already marked corrupted
Block Checking: DBA = 759492967, Block Type =
Found block already marked corrupted
Block Checking: DBA = 759492968, Block Type =
.DBVERIFY - Verification complete
Total Pages Examined : 1048576
Total Pages Processed (Data) : 0
Total Pages Failing (Data) : 0
Total Pages Processed (Index): 585068
Total Pages Failing (Index): 0
Total Pages Processed (Other): 8709
Total Pages Empty : 454799
Total Pages Marked Corrupt : 0
Total Pages Influx : 0
bash-2.05$ dbv file=/oracle15/oradata/pindb/pinx054.dbf blocksize=4096
DBVERIFY: Release 8.1.7.0.0 - Production on Fri Aug 29 12:32:28 2008
(c) Copyright 2000 Oracle Corporation. All rights reserved.
DBVERIFY - Verification starting : FILE = /oracle15/oradata/pindb/pinx055.dbf
Block Checking: DBA = 771822208, Block Type =
Found block already marked corrupted
Block Checking: DBA = 771822209, Block Type =
Found block already marked corrupted
Block Checking: DBA = 771822210, Block Type =
.DBVERIFY - Verification complete
Total Pages Examined : 1048576
Total Pages Processed (Data) : 0
Total Pages Failing (Data) : 0
Total Pages Processed (Index): 157125
Total Pages Failing (Index): 0
Total Pages Processed (Other): 4203
Total Pages Empty : 887248
Total Pages Marked Corrupt : 0
Total Pages Influx : 0
My doubts are :
1.if i drop the index and recreate the index with logging option will this error won't repeat in alert log file
2.in future if i activate the standby database will database is going to open without any error.
Thanks
Prakash
.

Media Corrupted Exception On MediaPlayer Restart

I have created a simple application to test out JavaFX. Withing that Proof-Of-Concept application, I load both sound and video into separate instances of a MediaPlayer. While running the application from the IDE, I can stop and start both the sound and video players with no problems. However, when I run it from my local IIS rendering it within Firefox, the first run works. I can .play() and then .stop() the players. When I attempt to .start() the players again, I receive a media corrupted exception and the player state remains in the "STOPPED" state. I have also attempted to "rewind" the media by doing a .seek() to the beginning of the media using its start time (Duration).
If needed, I can post code snippetts; however, I was hoping to get a call on "best practices" for stopping and starting the MediaPlayer. Do you need to implement a state machine to watch the state of the player to ensure it is in the proper state before sending a .play() or .stop()?

Log a issue report => https://javafx-jira.kenai.com
Include in the issue report a link to your video file so that a developer can help you debug your issue.
Also specify your environment, (OS, codecs, etc) in detail in the issue report.
I did create a transparent flv which worked in the past (unfortunately I don't have the original flv and I don't have the files or toolchain to generate a new one).
I think the transparent flv was larger than 512pixels (but can't remember for sure).
There is a transparent flv sample included with the Ensemble sample application, you could use some media diagnosis tools to compare how your media is encoded with the media from Ensemble and see if there are any major differences which might cause an error.
The fact that it works for a size < 512 pixels would seem to indicate a limitation of the JavaFX media system for your runtime environment.

Safari problem: when I switch back into safari from another application, the menu bar comes up but no tabs or windows. What's going on? Just started yesterday. I have found a workaround: when I Command Tab back to safari, I hit command T to open a new

Safari problem: when I switch back into safari from another application, the menu bar comes up but no tabs or windows. What's going on? Just started yesterday. I have found a workaround: when I Command Tab back to safari, I hit command T to open a new tab and Command W to close it, and my other tabs are visible.
I have tried shutting down, closing tabs, with no success. What's going on and how can I fix it?
Thanks,
Cindi B
PS: I'm not sure of the actual OS level, but I have not allowed it to upgrade to Maverick yet; concerned about it because of a few things I've read...

A Safari extension or third party plugin may be causing the menu bar issue.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
As for which OS X is installed.
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
The version is noted there.
v10.6 Snow Leopard v10.7 Lion v10.8 Mountain Lion
It's your choice whether or not to upgrade to Mavericks. If you decide to do this, make sure your Mac meets the requirements noted here.

ITunes says my iPod is corrupted and needs to be restored..

Ok, when I started up my computer today and opened iTunes to listen to my songs, it gives me an error message that my iPod is corrupted and needs to be restored before I can use it again. I've tried using different programs to back up my songs on my iPod to my computer but it's not working because my computer is also saying that disk J: (the usb port my iPod uses) needs to be reformatted, so I can't do anything with it out of iTunes..
What it's looking like is that I'm going to lose ALL the songs on my iPod (around $600 worth) and I'm not going to get anything back..
So what do I do to fix this problem without losing all of the songs I've bought?

Hello CoulntThinkOfAUser,
If you purchased the songs from the itunes store you wouldn't really loose anything. This is how to recover all of your previous purchases.
How to download past purchases.
Hope this helps.
~Julian

I tried to update my itunes and now it says it is corrupt and needs to be reinstalled. I am fearful of losing my music. Help!

I tried to update itunes and now it says my iTunes is corrupt and needs to be reinstalled. I am concerned I could lose all my music. Please Help with ideas/solutions.

You are in recovery mode. Restore it through iTunes on your computer.

I have a macbook and it says my itunes is corrupted and needs to be reinstalled, where do I start?

I have a macbook and it says my itunes is corrupted and needs to be reinstalled, how do I do that?

Try running the .dmg installer for the most recent version of iTunes, downloaded from the Apple website:
http://www.apple.com/itunes/download/

If my itunes is corrupted and needs to be reinstalled, will I lose all my songs? What do I need to do to keep everything?

I cannot open itunes. When I click on it a message pops up saying that itunes is corrupted and needs to be reinstalled. If I reinstall it will I lose all my songs? I have over 2,000 songs that I cannot lose! What do I need to do to fix it and keep all my songs?

Aha, a somewhat different question. See Recover your iTunes library from your iPod or iOS device.
tt2

Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

John -
My "Use" menu only contains Apple print drivers. And Canon drivers, from the location I set this machine up. None for my home use....which is a Xerox machine.
Not being on the menu, I don't know how to acquire this generic driver.
Any further helpful hints?
I appreciate your thoughts and help.
Lisa

Invalid media data found in slideshow

I am trying to send my slide show to iDVD via iPhoto share and I keep getting:
INVALID MEDIA DATA FOUND IN SLIDESHOW
All the photos in the slideshow were taken by me. I have made and shared many slideshows
with no problems.
All the songs are from my iTunes library etc...
Can anybody help me please!
Thanks

I am from france , and on iphoto09, i think i have the same problem , as i want to export a slideshow of 350 pictures, i have the answer of "données de support présentes dans la séquence incorrectes"
but it's worked for 20 slides ?
jean marc

No media was found in media/photos since photos update

since the update of 'photos' from iPhoto, when sending files to browser window/skype i can't access my library - on the sidebar are media: music, photos & movies, of which now photos is empty... no more 'iphoto library' and no 'photos library' ... just the message "no media was found"...

rednew
Welcome to the Apple user to user assistance forums
You may have canceled the scan - you can rescan by selecting the photos you want to scan and right clicking (control click) on one and select the "detect missing faces" command
LN

HT6114 Hi everyone! When I tried to update my OS X to 10.9.2 (Combined) thru the App Center, once it restarts, an error says "the version downloaded is corrupted and needs to be updated." I did download and update three times already but the same error oc

Hi! Why is it that after I updated thru the app center my OS X 10.9 to 10.9.2 (Combined), after it downloaded and restarts, this error occurs, "the version downloaded is corrupted and needs to download again."? I have been repeating the process for more than three times already but the same problem keeps on happening. Please advise.

Try the manual update:

Media corruption found: Needs workaround

Similar Messages

Maybe you are looking for