Media Encoder Crash on Launch- ?

Media Encoder crashes on launch. It's a brand new install on a MacPro 3.1 with a brand new MacOs10.8
It runs through the list of plugins and resources that it loads with the Logo Screen but halts and crashes on loading CoreAudio...
Please help?
In desperation I deleted it with the hope to re-install, but can't seem to find an option for the install through Cloud...
Thanks!

Stumbled across this at around 3am today while still troubleshooting. Sad to see no new replies yet. I'm having the same issues as well FireTrigger. (and, at a new job to boot, my employers are starting to wonder if I'm worth my salary at this point, haha!)
Fresh install of 10.9 with CC - AME crashes on startup with a coreaudio issue on thread 0.
Fresh install of 10.9 with CS6 - same deal
Fresh install of 10.8 with CC - same deal
Fresh install of 10.8 with Cs6 - same deal
Seems like it's a permissions issue, as from the error report, it looks like it's trying to create a folder (or write to one maybe) for coreaudio.
Tried trashing and resetting prefs. No good.
Tried resetting PRAM. No good.
Log out of CC, log back in - No good.
Unistall, reinstall, retry - No good.
Reboot, check for updates, etc., you name it. - No good.
Repaired permissions with disk utility and Onyx - No good.
There's no plugins, no other software, no installed fonts aside from system standard fonts. This is a completely empty install of OSX with Premiere on top of it.
I've wiped the whole machine out and re-installed on a clean drive about 10x now, no luck, same issues across the board.
The hell of it is that I dont even need AME for my workflow, but because it's obviously broken, I can edit a job inside of PP all day long, but there's no way to export it, premiere crashes
System specs:
Mid 2010 MacPro
12 (2x6 core) Xeon 2.8GHz
48 gigs crucial ram
ATI Radeon 5870 1GB
1TB WD internal (stock)
3x 3TB seagate7200rpm internals.
My next steps in troubleshooting = going to yank all the internal drives and install a fresh, 3TB bare drive and start over, we'll see what happens.
If no luck, I'll move over to testing on a trial copy of PrP CS6 absent the creative cloud if possible. I'm beginning to wonder if that's the source of it all.
I'll report back, and will edit this post with a URL to pastebin with some error reports. Would add now but had to run into the office for some meetings.
Good luck with this one y'all. Really nasty issue here, never experienced anything like this with adobe's stuff, and I've been a power user since CS2.

Similar Messages

  • Premire Pro CC 2014 and Media Encoder Crash During Launch

    Premire Pro and Media Encoder crash during startup and are unusable. I am using Windows 7 Ultimate and already tried reinstalling Adobe Creative Cloud from scratch and it's still happening. I also tried following Adobes KB articles directions to rename the Adobe folder in my documents and appdata to no avail. When I try to launch either application, I get a generic windows crash message "Adobe Premire Pro CC 2014.0 has stopped working" and when I click problem details, it lists this:
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: Adobe Premiere Pro.exe
      Application Version: 8.0.0.169
      Application Timestamp: 536f4f89
      Fault Module Name: ImageRenderer.dll
      Fault Module Version: 8.0.0.169
      Fault Module Timestamp: 536f2c18
      Exception Code: c000001d
      Exception Offset: 00000000001f5382
      OS Version: 6.1.7600.2.0.0.256.1
      Locale ID: 1033
      Additional Information 1: 0b2d
      Additional Information 2: 0b2df4702c3fc6489bf922fb8e966350
      Additional Information 3: fa9f
      Additional Information 4: fa9f59f642d335ee71c6667e52000d39

    I am having a similar problem.
    Premiere Pro CC 2014 suddenly decided to crash every time I export to either Adobe Media Encoder or within Premiere itself.
    The encode will usually go for 5-10 minutes before the programs either spits out a "serious error has occurred" window, or it just sits there frozen until I force quit.
    I did find a work-around for the moment. If I open AME and FILE > OPEN, select my project and then the sequence I want, AND put it in Software render mode, it will work.
    My timeline is 2K, 58 minutes in 23.976
    Only effects applied are Lumetri LUTs - no third party.
    I've exported as recently as a week ago without issue.
    Running OSX 9.5 on an X99 board
    3.75 GHz 8-core
    64GB 2400 MHz RAM
    EVGA Titan Black 6GB
    Because I can get my renders out, I am not too concerned. Either there is something wonky with my timeline that screws with any graphics enabled rendering, or there is a bug that is have the same effect. I will try rendering on another of my edit bays that utilizes a GTX 580 that I KNOW works. The Titan is pretty new to my workflow.
    Thanks Adobe, for checking this out.

  • Adobe Media Encoder Crashes when launched

    Hello, friends on the forum!
    I am using a PC with a Windows XP (Home Edition) o/s.  It has an Intel Pentium 4 cpu @ 2.80 GHz and 2.5 gb or RAM.  This problem just developed: when I try to export a CS4 project, AME hangs and crashes.  I then get a message saying "Adobe Media Encoder CS4 has encountered a problem and needs to close.....yadda, yadda, yadda!"  It then, by itself, tries to launch again with the same dismal result.  Any suggestions as to how I might fix this?  Many thanks in advance!
    Lewis Beck

    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

  • Updated to PrPro CS4 4.1.0 but now Media Encoder crashes upon launch

    I also downloaded and installed the Media Encoder updater from http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4492&fileID=4176 , but when I checked my ME app file, get info shows it's still v4.0.0. Splash screen displays v4.0.0.374
    ME crashes immediately on launch every time.
    What's up?

    Thanks, pal.   That worked for me. I'm really grateful!
    Lewis Beck

  • Media Encoder crash in Windows 7

    I just finished building a new machine to take the place of my old one. I'm using CS4 Master Collection. I don't use the video tools a lot but last summer I put together a presentation using Premier and created an avi file from it using Media Encoder. I worked on this for a couple of months and it always worked fine.
    Well a coule of days ago I decided to see how fast things would run on my new box so I ran the same project. I opened it up, clicked "export" and then "media" (I think that's it, I don't have it up and running at the moment). Media Encoder opens up at that point. About 20 seconds into it, my computer crashes and reboots. No BSOD, no freeze up, just pow, shut down and restart on its own. I've tested this a few times and even chose mp4 output to see if that made a difference. None. Same deal. One time when I opened up Premiere the whole machine froze but mostly I can get to that but Media Encoder crashes the system.
    I read that this was a problem in the RC days of Windows 7 but I figured the Adobe updates would have handled this by now (I did run the update so everythings current - CS4 and Windows 7). I've run several stress tests (Prime95, memtest, furmark, etc, including thorough drive tests with WD diagnostics) before loading up my programs and done a lot of stress testing after that too. in fact I'm running Prime95 now and no problems.
    What's going on with this? Anyone know? (I want to submit this to Adobe bug support as well but can't find a link for that)
    Here's my system:
    OS = Windows 7 Ultimate 64 bit
    Motherboard = GIGABYTE GA-X58A-UD5 (BIOS v 5)
    CPU = (1) Intel Core i7-930 Bloomfield 2.8GHz LGA 1366
    RAM = (12GB total) CORSAIR XMS3 6GB (3 x 2GB) DDR3 1333 (PC3 10666) 7-7-7-20 Model TR3X6G1333C7 G
    Cooler = Noctua/XION NH-U12P SE2 (2 fans)
    Video = (1) EVGA 512-P3-N871-AR GeForce 9800 GTX+
    Sound = HT | OMEGA CLARO Plus+
    Case = LIAN LI PC-P80 or PC-A77F
    PSU = CORSAIR CMPSU-HX1000
    Storage = (2) Intel X25-M 80GB SATA II MLC SSD RAID 0 (on the Intel controller)
    Storage = (4) yet to be determineed HDD's (probably going to use WD7502ABYS) RAID 10 (on the Intel controller)
    Storage = (1) Western Digigal WD1001FALS 1TB HDD for my DVDs
    Storage = (1) Western Digigal WD5001AALS 500GB HDD partitioned in 3 parts for clones of the OS drive in case of emergencies (this is in addition to clones and backups that are on spare drives outside the box)
    Optical = (2) LITE-ON DVD Writer - Bulk - Black SATA Model iHAS224-06

    Mea Culpa.
    I misread the big 7 as meaning PR7. Sorry to mislead you and to have misread your post.
    It could be a myriad of things, but look at the second link in this link: Some suggestions...
    There is some info requested, like Process Explorer (not Task Manager) and DXDIAG. Maybe that will shed some light, but temps and voltages are the first suspects.

  • Media Encoder crashes when exporting from Premiere Pro

    Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
    Any idea why Media Encoder will crash?

    Try turning off GPU acceleration.

  • Premier Pro CC and Media Encoder crashing on long file export.

    Please forgive the length of this inquiry. But it is complicated and has a lot of variables.
    I have an hour long mixed format timeline both Red 3K footage and Black Magic ProRes 1080P footage that I want to make a DVD from and it takes forever and crashes half way through. I have tried doing it every way possible and the only way I was able to get even a partial export was using the "MPEG 2 DVD" export option in Premier CC. It goes fast at first telling me it will take about 2 hours but even though it starts quickly doing about 15 fps it slows down to less than 1 fps and finally just stops and crashes my Cuda Core enabled Macbook Pro Laptop.
    I really don't know who to ask about this since there are so many different variables. I never had a problem like this on my MBP with PP6 on a 4K timeline exporting to DVD or Blue Ray or to H-264 or Even Prores. But I wasn't mixing formats either. But on this project the first 20-30 minutes of footage goes through fine in a couple of hours but something seems to be bogging down the system on longer projects. My work around was to break the project up into multiple exports and combining them on the DVD timeline but I can't do this on every project. I thought maybe it was a corrupted clip somewhere in the timeline but when I broke the timeline up into several parts I had no problems.
    I did notice a dramatic variance in the time it took to export footage based on the sequence settings. A one minute timeline comprised Red 3K footage and ProRes 1080P footage Here are some sample export results:
    From a Red raw 3K timeline 2880x1620  with 1080P Prores footage upscaled 150%)
    to .m2v Mpeg 2 720x480 format    1:48 Minutes ***
    to .mov  Prores 422HQ  1080P                         22 Minutes
    to .mov H.264  1080P                    22 Minutes
    to .m2v Mpeg 2 1080P                                                22 Minutes
    From a 1080P timeline Prores footage at 100%  (Red footage downscaled to 67%)
    to .m2v Mpeg 2 720x480 format                         13 Minutes
    to .mov  Prores 422HQ 1080P                             13 Minutes
    to .mov H.264  1080P                                                             14 Minutes
    to .m2v Mpeg 2 1080P                                                            14 Minutes
    Since I am going to DVD,  I chose the fastest option  Red to m2v Mpeg 2 720x480 format which only took 1:48 per minute. Why? I have no idea. Maybe someone here knows the answer. But again these numbers are for a ONE MINUTE clip when I tried to convert the whole hour timeline to  the 720x480.m2v DVD File the Red timeline froze my computer after several hours even though I had set sleep mode to “Never” and turned the display off manually and I had to convert it in multiple chunks. In 20-30 minute chunks it did go fast about 1:48 per minute like the test indicated. But I would like to be able to convert the whole hour and not to have to try to stitch the clips together in my DVD authoring program.
    I don’t want to have to avoid using multiple formats on the same timeline or waste time transcoding everything to the same format.
    Can anyone give me any suggestions as to why the computer is crashing or bogging down in long exports and what timeline settings I should be using?
    I have plenty of room on my Scratch Disk and 8 Gig of RAM and according to my Activity Monitor during the export process  have about 800 Meg of System Memory during export but the CPU Usage is 98% and in my Activity Monitor I see under “Process Name” ImporterRedServer flashing up at the top of the list about every second during export.
    Why .720x480 mpeg DVD setting is so much faster than all the other export codecs?
    And if there are any other settings I can use to get higher speed exports in HD? 14x1 seems a little slow especially since every time it crashes I have to start over.

    Hi,
    Since a long time I did not encounter the crash of Media encoder with
    long file export.
    But I take care of a lot of details before the export :
    - clean up Media cache and Media Cache Files within PP CS6 and/or CC,
    - delete all render files with Preview Files,
    - rendering of sequences until the rendering is completed,
    - PP CS6 and/or Pp CC opened during export to AME and/or Encore CS6,
    I guessed to leave Adobe but this company remains the last with a
    serious authoring software (Encore CS 6).
    I tested :
    - Avid Media Composer, Final Cut Pro X, both are very good software but
    no really authoring software for these video editing softs.
    Th only way is to "flood" Adobe with "bug reports" and "wish forms"
    which are not very easy to use.
    And also to call the Adobe support day by day until they send they
    escalate the bug.
    Le 16/05/2014 16:51, alainmaiki a écrit :
    >
          Premier Pro CC and Media Encoder crashing on long file export.
    created by alainmaiki <https://forums.adobe.com/people/alainmaiki> in
    /Premiere Pro/ - View the full discussion
    <https://forums.adobe.com/message/6384665#6384665>

  • MEDIA ENCODER crash error: c:ame820_win\releases\external\adobe\mediacore\mediafoundation\api\  PLEASE HELP

    WORKSTATION HP Z600
    XEON E5645 12GB RAM NVIDIA QUADRO 2000 WIN 8.1 64bit
    BLACKMAGIC DESIGN ULTRASTUDIO SDI
    good morning,
    I have some problems with premiere pro cc 2014 release 2
    the most important is that Media Encoder crashes and the following error:
    c:ame820_win\releases\external\adobe\mediacore\mediafoundation\api\
    The second problem is that when I open the software you group all the windows on one side.
    Does anyone know what I need to do to solve these two problems?
    please help
    Andrea

    I do have a 64 bit OS - Win 7. The RAM does provide a noticable difference in performance - things are much more "snappy" now, which I'm enjoying, but hasn't eliminated my problem.
    The encoder does not stop at the same point, it seems to be quite random. I can view the files that I've exported (up until the point they cut off) and there's nothing going on in the clip that would be any sort of red flag - in other words, it is not stopping the coding at a point where a new color correction or title is being introduced, it had all happened previously. This is my first large project on CS4, and I don't have anything else to export at the moment!
    I'm not running premiere in multi-monitor mode: I've got a 24" widescreen monitor that is my sole monitor.
    I have COMBED the interwebs trying to find a resolution to this issue, and I am no where... I'm currently installing CS4 on a XP machine that I have that is pretty robust, and am going to try encoding on that, just to see if I get a different result.
    Any suggestions at all would be MOST appreciated!
    Thanks!

  • Adobe MEdia Encoder Crashes with big files inputed

    Hello,
    There isn't a forum for the Adobe Media Encoder, so I thought this would be a good spot. I am an after effects and Premiere user who likes the idea Adobe seems to have of using the media encoder to cover all my encoding needs.
    My typical workflow, especially since these days I'm doing more shorter form animations, is to render out to a Quicktime Animation codec file as my main archive file. From there, output all the various different web versions, flv, etc from that core archive file. Since my projects usually aren't running more than 5 minutes, this leaves me with a nice 3 - 7gig file.
    Problem: I'm running CS4 and the media encoder crashes when I input files that are in this file size range. The program locks up when I push start que, and then eventually crashes. Works fine with smaller size files that are about under a gig.
    I can run a render out of after effects, which seems to be more stable. But I'd love to be able to use this great new tool.
    Here's my machine specs if it helps:
    PC
    Intel Quad Core Q9550 @ 2.83 ghz
    4gB RAM
    Windows Vista 64 bit ultimate
    All updates current for CS4 apps as of 01/30/08
    Running Adobe Media Encoder V 4.01.078
    Hard drives are nothing special. 7200 rpm western digital internal and external. I've tried all sorts of hard drive configurations, where the input is coming from, where it's going, etc. No difference.
    I have been experimenting with using Lossless AVI's as my "uncompressed" archive file. Works well, but same crashing with the Media Encoder.
    Also tried experimenting with frame size alterations during encoding, no difference there. Also, whatever the output codec is, be it FLV, H264, etc. no difference.
    Anyone have any thoughts or have experienced similar issues? I hope all my MAC friends aren't right, seems like all my attempts to streamline my workflow with this CS4 and beefy PC combo are crashing and burning.
    Anyone else feeling this pain, or have recommendations?
    Thanks,

    Thomas, thanks for your suggestions on Vista optimization. That Sheer Codec looks nice, but hard justify the cost when I've been working for years with essentially uncompressed codecs that work well. Will play more though to see if the cost would actually pay off in the long run though.
    In general I made a decision that it was too early to throw in the towel on my old uncompressed codecs. The Quicktime animation codec has always been for me the safest, most universally accepted, and most reliable "uncompressed" codec. It's always worked in the past, not gonna give up just cuz media Encoder CS4 has troubles.
    Mylenium, thanks for the reminder about the silly platform wars. I've always felt the same as you, but when I'm stressing sometimes the silly propaganda can get to me. Makes me forget that no matter what system ya got, it never works perfect!
    Here's an update. I have trying my best to learn more about the bug and have come to some interesting realizations. The AME does work with larger files, just not the larger files that I had been using at the current moment. Older files of mine as big as 20GB can be inputed into AME with fine results.
    This being said, it scratches out most of the RAM overload thoughts with AME.
    The difference with my current files that were causing AME crashes: larger than a few GB, came from AE, had the 1.21 pixel aspect ratio metadata.
    When I re-interpreted the file in AE into a square pixel aspect ratio, exported it, it was then successfully inputed into AME.
    I have read just now that there were changes in After Effects widescreen pixel aspect ratio interpretation in CS4. Can this change be causing problems in my AME. Not positive, but I'm now thinking after many days of testing that the bug could have its roots somewhere in this ball park.
    If anyone from Adobe is reading this, I would love any ideas you might have on this issue. In general, there is really no support for the Adobe Media Encoder itself. This is not good, considering how it is so necessary for AE and Premiere users like myself.
    Thanks,

  • Premiere Pro, Media Encoder Crashing When Exporting/Rendering

    For the longest time if I ever tried to export or render a video longer than 5 minutes, my Premiere Pro or Media Encoder crashes. I don't know why but it is EXTREMELY irritating when attempting to make lengthened gaming videos. I have tried 15 different methods all online, to no avail. It always crashes around the 40% mark in Adobe Premiere and it isn't a corrupt project. I have literally tried everything to no avail and I finally decided I would turn here to ask for help. I reset the preferences, tried copying and pasting into a new sequence, tried reinstalling Premiere... the whole bit. My technical specifications are not the issue at hand I don't believe, but just in-case the list is provided below. Please make any response swift, my intent was to upload the video I have in Premiere by tonight!
    Technical Specifications:
    OS Name
    Microsoft Windows 7 Home Premium
    Version
    6.1.7601 Service Pack 1 Build 7601
    Other OS Description
    Not Available
    OS Manufacturer
    Microsoft Corporation
    System Name
    FRITZ-PC
    System Manufacturer
    MSI
    System Model
    MS-7821
    System Type
    x64-based PC
    Processor
    Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz, 3400 Mhz, 4 Core(s), 4 Logical Processor(s)
    BIOS Version/Date
    American Megatrends Inc. V1.1, 5/3/2013
    SMBIOS Version
    2.7
    Windows Directory
    C:\Windows
    System Directory
    C:\Windows\system32
    Boot Device
    \Device\HarddiskVolume1
    Locale
    United States
    Hardware Abstraction Layer
    Version = "6.1.7601.17514"
    User Name
    Fritz-PC\Fritz
    Time Zone
    Eastern Standard Time
    Installed Physical Memory (RAM)
    8.00 GB
    Total Physical Memory
    7.95 GB
    Available Physical Memory
    5.97 GB
    Total Virtual Memory
    15.9 GB
    Available Virtual Memory
    12.4 GB
    Page File Space
    7.95 GB
    Page File
    C:\pagefile.sys

    Some general questions/ideas...
    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    What are you editing?
    Codec & Format information, read both links in reply #1 http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to find file information for PC/Mac
    Have you tried the NEW ITEM process to insure your sequence matches your video?
    See a link on page #5 at http://forums.adobe.com/message/2276578
    And, finally, for shutdowns, you MAY have a hardware heat problem
    Read Bill Hunt on BSOD shutdowns http://forums.adobe.com/thread/772169
    -win32k.sys BSOD http://forums.adobe.com/thread/1404938?tstart=0
    -and an Encore fix http://forums.adobe.com/thread/1060443

  • Adobe Media Encoder crashes when I open a file

    Adobe Media Encoder crashes when I browse to open a file.
    I have a Creative Cloud subscription.
    I have uninstalled and reinstalled the program through the Creative Cloud service. No change.

    Thanks for responding.
    Yes, I am trying to utilize Photoshop CS (8.0) and I run Windows 7.1. I installed this from Adobe's Creative Cloud. The program opens, and I am able to open a Photoshop file with it, but then Windows tells me that there is a problem and is shutting down. I'm not sure would the problem might be.

  • Media Encoder starts to launch then quits CS4

    I am running Windows 7 and Adobe Premier Pro CS4. I have been using for a few months with no problems. One night I exported movie to Media Encoder, no problems and the next morning when I made a change and tried to export again, Media Encoder starts to launch and after about 20 seconds, it gives the message that it stopped working. I have uninstalled and reinstalled several times including rebooting with no problems and it still is not working. Does anyone have any suggestions?
    Thanks!

    Maybe do a System Restore?

  • Media Encoder Crashes constantly

    I have Masters cs5. I have tried on several occasions to convert something and everytime i try with almost any format to any format, media encoder crashes.
    Is there some type of maintenance or trouble shooting i could do for this?

    Have you installed the recent updates?

  • Exporting to Media Encoder crashes Premiere Pro CC 2014

    Greetings,
    I am experiencing a problem with premiere off and on. Right now it is an on problem. When I am exporting from Premiere Pro CC (and CC 2014) it will intermittently crash Premiere. I have tried this with several different audio and video formats (AVI [Lagarith and uncompressed], WAV, H.264, MPG2, AAC, etc). At the moment, every time I go to export to queue it locks up and hangs on the "Preparing data for export..." Media Encoder Launches and then it just freezes. I get "Problem Even Name: AppHangB1" over and over. Sometimes a full restart will fix this temporarily and sometimes it goes away for a long while. I managed to get a few sequences exported and then it just kept freezing on every PP CC restart.
    Here are my system specs:
    Premiere Pro CC (up to date)
    Win 7 64bit (up to date)
    i7 970
    24GB Ram
    NVIDIA 470GTX (driver up to date)
    3 x 1.5TB internal
    4TB internal
    3TB internal
    12TB RAID 5 via USB 3.0
    USB 2.0 and 3.0 drives
    FireWire audio device (M-AUDIO FireWire1814)... although, I am not using it for playback. It is connected.
    Footage is from C100 H.264 .MTS, H.264.mov from 7D, and H.264 .MOV from iPhone.
    All stock video plugins with a few third party audio plugs.
    This problem happens with and without third party plugs, but it happens that this project uses them.
    I have chatted with Adobe help twice about the matter and nothing has come of it. Log out, log in = same. Restart = same (sometimes), create new user account = same, and so on. The only thing I haven't done is completely re-install premiere, which seems a bit overkill. One of the reps said he would get back to me in a few days after he watched the issue via screen share. Never heard back.
    I get the sense that this has something to do with PProHeadless.exe not launching or not running properly. When the crash happens on a fresh restart of PP CC 2014 PProHeadless is not running. I can start PProHeadless and it will send sequence to media encoder. When I try to export another sequence from the same project it crashes and I see another instance of PProHeadless launched.
    Also, once the projects are exported to Media Encoder, I can encode them to any format with no problem. The problem is getting the sequences there!
    Is there anything that I am overlooking here?
    Thanks for the help!

    Hi
    Premiere pro cc 2014  8.0.1 (21) build
    Encoder CC 2014 8.0.1.48
    I use CC for Teams so it updates all the time.
    Again when I tried to use it today by letting premiere open it by sending an output into Queue it crashed both Encoder and Premiere.
    In order to shut down Encoder and Premiere I had to go into Task Manager and "End Process Tree" on everything adobe I could find because just ending Encoder did not work it would not close. I remembered that years ago when Premiere would crash we had to end a photoshop process. I found photoshop open even though it was not "alive" on my task bar. I had used it yesterday but had closed it. I also had to close dynamiclinkmanager.exe *32 as well as one of the three Adobe CDF Helper.exe*32. They popped back on but Encode closed and then I got a message that Premiere needed to close and did when I clicked the button to let it close.
    After all this I re-opened Encoder by itself and checked the Preferences finding that Import Sequences Natively option was again checked.
    By the way for me, "Launch AME manually, then drag the sequence from PPro's Project panel to AME's Queue (or to a preset in the Preset Browser). That uses a different code path than the File>Export>Media workflow." won't work most of the time because I do live events of panel interviews that may run 2 or more hours. I need to break them down to chapters for the web
    Also I know this isn't part of this problem but I and many others would still love dynamiclink to work to Encore because the DVD is not dead yet. The current work path is a drag.
    Looks like some programers and engineers have some work to do.
    Thanks
    Dennis
    My computer:
    Self built PC windows 7 Professional 64 bit Build 7601 SP 1 I use auto update so it is up to date.
    ASUS P6x58D Premium Motherboard
    Intel (R) Core i7 930 @ 2.80 Ghz
    Installed Memory  12 GB
    NVIDIA GeForce 9500 GT
    NVIDIA GeForce GTX 580
    2 Apple Monitors and a HP full HD Monitor
    With a BlackMagic Intensity Pro Capture Card

  • Premiere CC and Media Encoder crashing new Mac Pro

    Since installing CC on my new Mac Pro (Late 2013) Premiere and Adobe Media Encoder have been continually crashing my system.
    At first, my comp would freeze and I'd have to hard restart, then it switched to rebooting on in's own. This would happen 10-20 times a day while editing.
    This began shortly after I synced settings from a previous version of PP but since I've installed new RAM; reinstalled CC/PP; reformatted my HDD and reinstalled Mavericks, CC, PP; and have not synced my settings. I've also tried editing multiple projects of different sizes with different media types -- all are experiencing the same problems.
    When I edit the same projects on my MBP, everything works fine.
    Recently, I have disabled GPU acceleration in all of my PP projects and that seems to have solved the problem.
    My office received 3 Pros at the same time with the same hardware configurations and software -- I am the only one experiencing this problem.
    Here are some specs:
    Late 2013 Mac Pro
    2.7 Ghz 12-Core Intel Xeon E5
    64 GB 1867 MHz DDR3 ECC
    AMD FirePro D700 6144 MB
    All drivers, CC, and software is up to date.
    So what do I do now?
    Any help is much appreciated!

    I am on Windows, but have a few saved Mac discussions that may help (or, may not... but free to read)
    Mac and Root User http://forums.adobe.com/thread/879931
    -and http://forums.adobe.com/thread/940869?tstart=0
    Mac & nVidia Driver http://forums.adobe.com/thread/1075592
    -and http://www.nvidia.com/object/mac-driver-archive.html
    Mac Retina Bug http://forums.adobe.com/thread/1159632
    Troubleshooting guide for Mac freeze
    http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
    External speakers stop playback http://forums.adobe.com/thread/1370072?tstart=0
    OSX Crash http://helpx.adobe.com/creative-cloud/kb/ame-premiere-crash-launch-export.html

Maybe you are looking for