Media Encoder CS4 - compatability

Hi,
I'm not a Premiere user - but this seemed the best place to post about the Media Encoder.
I use Design Premium CS4 on a Macbook Pro - I have just updated my firmware and now cannot use Media Encoder.
I am running OSX 10.5.8
When it was installed - i was told that i could no longer open the Encoder because it is "not supported on this architecture".
I've downloaded the latest update - AME_All_CS4.0.2.
I cannot find another more recent update.
When trying to install the update - I'm told "cannot install the update"
I use the media encoder to convert MOVs to FLVs.
Any suggestions/help on my compatability problems would be greatly appreciated!
Thanks
Matt

There have been several instances, such as you describe, on the forum lately. Do not recall any exact resolutions though. I'd seach for "green flashes," as that exact phrase has been used in many.
On the PC using the latest version of QuickTime the exact same video stutters and flashes green.
Is this with QT 7.6.2? Many had major issues with the QT 7.4.x versions and Adobe software. The QT 7.5.5 version seemed to fix most of those, but another user was having issues with it very recently, and there have been some, who have also had issues.
It seems that QT will work with Adobe products for a bit, and then the next upgrade, or two, will fritz up the whole works.
Wish this was not such a "moving target."
Good luck,
Hunt

Similar Messages

Media Encoder CS4 stops encoding half way through

I am going a little bit insane.
Running PP and Media Encoder CS4 on Windows 7 and attempting to export a 5 minute film on preset 'Download NTSC Source' (but this happens no matter what settings I use): Media Encoder runs for approximately 5-6 minutes, loads the sequence, begins to encode and then stops.
It doesn't spit out an error message, it finishes the file (a 6MB .wmv file (on these settings) that plays a blip of white and then ends) but never gets further than four minutes through what should be a 35 minute encode process.
I've trashed the prefs, I've run all the updates, I'm using XP Compatibility mode ... I literally cannot figure out why the process should just ... stop.
Help??

Welcome to the forum!
Do you have any titles, graphics or MOV files near the beginning of your sequence? I think there was a bug in CS4 that would trash the encode if they were there. It was eventually solved -- either through an update or in CS5. Make sure your copy of CS4 is fully updated.
Jeff

Can Ppro CS3 projects be imported by Media Encoder CS4

Hello:
I have Ppro CS3. I also have the Design Suite CS4. I would like to render out Ppro CS3 sequences or projects into F4V files in Media Encoder CS4.
Does anyone know if this is possible? When I select "add Premiere sequence" in Media Encoder CS4 and find the Ppro project in the file tree Media Encoder hangs just upon selecting the Premiere project without even attempting to add to the render queue. I am not sure if this is because CS3 project are incompatible, or for some other reason. As mentioned, Media Encoder CS4 hands as soon as the Premiere project is clicked to selected and before "ADD" is clicked to add to the render queue.
Anyone come across this problem? Is it fixable, or are Ppro CS3 projects just incompatible with Media Encoder CS4.
Thanks.
Jeff

I appreciate the reply.
However, unfortunately, I do not have Premiere Pro CS4. This is why I am trying to export to Media Encoder CS4. I own the Design Premium CS4 suite which has Media Encoder CS4 version built in.
Media Encoder actually is a stand alone product. When you bring the program up, It has import options for the files you wish to encode. One of the options is to import a PPro sequence. However, when searching the system for Sequences, I could only figure out how to get to the Pproj files.
Documentation appears to indicate the Pproj files are compatible with Media Encoder. However, when I droped in the Pproj file from Premiere Pro CS3, I got a message that it was not a compatible file (message text may not have been that exact statement).
This is why I was curious to see if there is a version compatibility issue, or if someone can tell me how to other render out of Premiere CS3 into the Media Encoder version that comes with CS4 suites.
Thanks.
Jeff

Adobe Media Encoder CS4 runtime error

I am wondering why I am getting a runtime error while
attempting to use Adobe Media Encoder CS4...As soon as I launch
Adobe Media Encoder CS4, it crashes I have installed and
reinstalled Flash a couple time, to see if this corrects the
problem, which it doesn't, and just last week it was working
fine...Does anybody have a ideal what is going on?

Don't know if this helps anyone else, bt the runtime errors i have been getting occur when I try to build and burn a blu-ray file. And they happen intermittently. In fact, on this project, I had burned several test blu-rays without difficulty. When I made one minor change on the penultimate version, and tried to burn again, the system crashed with a run time error. Then it crashed 9 more times over the course of the week.
Finally in frustration, I created an interim ISO file in Encore- ie in the build workstream, i selected burn an image file rather than burning a blu-ray disk. After this intermediate step completed, i then did a separate burn in encore but burned from the image file. No snags.
Not sure why but this program has trouble doing a sequence of activities. As it is, I already render and save the file before burning. Now I have another interim step to create an image file before burning.
In my next hardware change, I am going to switch to make Mac and Apple software. Enough of MS Windows and Adobe, the GM and Chrysler of the software industry. Hopefully what my friends tell me is true; that Apple stuff actually works.

Adobe Media Encoder CS4 Encoding Error

I got an error when Adobe Media Encoder CS4 encoding which is the crash of ImporterProcessServer. It crashes the halfway of the encoding process. I restarted my comp and tried several times before but the results still the same. Sometimes ImporterProcessServer did not crash but the encoder failed compiling without any error.
Processor : Intel Core 2 Duo E4600 2.4GHZ
RAM: 2GB
OS: Win7 32bit
Graphic: Nvidia 8600 GeForce 512 mb

First thing to check is what is on the Timeline at about the 50% point. Do you have an odd Asset there?
Do you have a gap in the Video at about that point?
Then, do you have adequate defragmented free space on the destination HDD?
Good luck,
Hunt

Adobe Media Encoder CS4 error

Hi,
I've just purchased Flash CS4 and tried the "Adobe Media Encoder CS4" that comes with it.
When attempting to launch it, I get this (see attachement) error and the program doesn't launch.
Anyone aware of the cause of this error ? How I could get it resolved etc..
Thanks in advance.

Any update on this?
I get WinFile.cpp-754 on CS4 and WinFile.cpp-785 on CS5 trying to encode the same AVI file.
I'm trying to load a 59.94 fps AVI file into PremierPro CS4 and need to convert it to something else (correct?)

Adobe Media Encoder CS4 error in elearning suite trial version

Hi there, I have a trial version of elearning suite 2.5 and I have the error "Thank you for using Adobe Media Encoder CS4. The Adobe product that installed Media Encoder has not activated. Please launch and activate that Adobe product before continuing to use Media Encoder". My searching points me to a full reinstall, but is there an easier fix? Currently running Mac OS 10.5.8. Thanks.

Any update on this?
I get WinFile.cpp-754 on CS4 and WinFile.cpp-785 on CS5 trying to encode the same AVI file.
I'm trying to load a 59.94 fps AVI file into PremierPro CS4 and need to convert it to something else (correct?)

Media encoder CS4 can't do what Flash Encoder CS3 does????

Quad 2.66 Xeon MacPro / OS 10.5.8 / CS4 all updates applied. / 24GB RAM
Adobe Media Encoder CS4 won't import .wmv videos.
Flash CS3 Media Encoder does it just fine.
What's the deal? Why remove the support?
I do have Flip4Mac installed as well as Perian. Any chance these items allow the CS3 encoder to work, but not the CS4?

Quad 2.66 Xeon MacPro / OS 10.5.8 / CS4 all updates applied. / 24GB RAM
Adobe Media Encoder CS4 won't import .wmv videos.
Flash CS3 Media Encoder does it just fine.
What's the deal? Why remove the support?
I do have Flip4Mac installed as well as Perian. Any chance these items allow the CS3 encoder to work, but not the CS4?

Adobe Media Encoder CS4 doesn't encode audio

I'm having trouble getting the Adobe Media Encoder CS4 to
work properly. I have tried multiple files of different lengths but
end up with the same output. Nice video encoding, but the audio
starts and then cuts out after a couple of seconds. The longer the
video, the shorter the audio works. The logs don't report any
issues. Anybody have any ideas?

I have the same problem just trying to crop an FLV. (Encoding from FLV to FLV on Snow Leopard).
The audio just dies about 5 seconds in (the clip is 28 seconds long).
Sucks. I wish I could find the original .mov
I wish I wasn't forced to recompress the audio.
I've tried various settings all night - most settings result in no audio whatsoever.
Also, Media Encoder alters the mod date of my original file. Why?
I'm really frustrated with this software.

Media Encoder CS4 won't launch

Hello,
I am trying to use Media Encoder CS4 but it will not launch. It seems to get hung up on "ImporterQT.bundle".
I am on a Mac G5 Dual 2.5 GHz Power PC running OSX 10.5.7
Please help! I'm on a really tight deadline.
Thanks!

ImporterQT.bundle may be missing or corrupt
uninstall Media Encoder using the package in \Applications\Utilities\Adobe Installers
then reinstall.

Media Encoder CS4 won't update - Mac

I have CS4 and Adobe media encoder 4.1.0 will not update,
I have downloaded it via software update and then it installs and after a check of software update it asks me to update exactly what I just updated.
Does anyone know how I can sort this issue out?

Hi Jagan,
Thanks for the response.
After installing the CS4 Design Suite Premium, I moved all the apps/folders to a newly-created "Adobe" folder inside my applications folder. I always ran the Updater to check and download the updates. I didn't pay attention to the success of the updates, since they always ended with a dialog box that said "Finished". It's only when I noticed that it was downloading the Media Encoder update over and over again, that I got suspicious. When I looked in my Applications folder, The "Apple" folder I created was still there, but there was also a new "Media Encoder CS4" folder, which was not there before.
I deleted this new "Media Encoder CS4" folder and ran Updater again. Updater then downloaded the new version and installed it. Unfortunately, the Media Encoder CS4 in my "Apple" folder was not updated to the new version, but that duplicate Media Encoder CS4 folder was back
I browsed through the other messages here about update problems, and I decided to re-install the Media Encoder CS4. I trashed the duplicate folder and put in the DVD. In order to re-install the Media Encoder, I had to also re-install Flash CS4. I did so, then ran the Updater again (I did not change the location of any of the re-installed programs prior to the update). Lo and behold, Media Encoder was updated correctly! I continued the remaining updates to get my software back to the current versions. I thought I was home-free, but unfortunately I wasn't
Although Media Encoder was updated correctly, now Drive Manager and Acrobat Reader are not getting updated. The update installer says that the updates completed successfully, but when I run the Updater again, it identifies those same 2 programs as needing updates.
I downloaded the updates manually, but installing them did not update the programs.
If you have any other ideas, I would greatly appreciate it!
Mike

F4v encoded with Adobe media encoder CS4 (longer than 71 minutes)

Hi I don't know if this is the correct place for this post. So apologies me if this is the wrong place.
Encoding with Adobe Media Encoder CS4 (4.2.0.006 and 4.0 too)
Source: MOV (DVPAL) longer than 71 minutes
Dest: F4V (H.264)
Result: freezed frames and only plays audio at 01:11. Media Player goes crazy and starts showing some diferent parts freeze frames.
In Quicktime crashes, in VLC the same of MediaPlayer. Sometimes the audio starts to downsampling and sounds like the pitch goes down.
Totally agree with this other post: http://forums.adobe.com/thread/580391
(extract)
I recentlly encoded afew F4V using Adobe Media Encoder Cs4. MOst of them are working properly but I don't know why, all of my video that are longer than 71 minutes seems to have trouble playing back. They all Freeze when they reach 71 minutes or if I navigate pass this point.
thanks and help us please!
Kik

Thanks for the interest.
I'll try to explain all details:
MacPro 1.1 (mid 2006) under Mac OS X 10.4.11 (Darwin 8.11.1 kernel)
System files: journaled HFS+ and a unix based NAS (under samba connection)
I have all material on the NAS and also I make the transcoding over it. Is a simple mov containing DV PAL WIDE interlaced 25fps with stereo audio. typical settings with nothing out of DV PAL standard.
The version of MediaEncoder CS4: 4.2.0.006 (it happens with older versions too)
The settings of MediaEncoder are:
Audio: AAC stereo 44,1 kHz
Video: F4V. MainConcept H.264, fps like source, profile high, level 4,1. CBR compression.
The problem only appears with videos longer than 71 minuts. At 01:11 starts with crazy problems. It seems like the player have some read or problems.
Tell me if you need some other kind of information.
thks

Media Encoder CS4 No Error No File (Says It's Created, but It Isn't)

I have tried repeatedly today to encode an QuickTime container to P2 format, and while Adobe Media Encoder CS4 appears to load correctly, do the conversion, and confirm the file creation, I can not find the file that was supposed to be created.
There is no error message. Below is the transcript of the log from one attempt:
9/10/2009 5:38:41 PM : Queue Started
- Source File: F:…\NASDAQ\0001DI.mov
- Output File: C:…\Desktop\0001DI_1.MXF
- Preset Used: DVCPROHD 720p 30
- Video: 960x720, 29.97 [fps], Progressive
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:00:22
9/10/2009 5:39:04 PM : File Successfully Encoded
9/10/2009 5:39:04 PM : Queue Stopped
Only, no where on my computer is there the file “0001DI_1.MXF”. Not only have I looked in the Desktop folder where it is supposed to be. I have searched both hard drives on my computer for that file. This has happened repeatedly with variations of the output file name in the last hour or so.
I have rebooted the machine. I have run error-checking on the hard drive. Even though only log into my with my own account and no one else uses it, I have even created a text file with the same name, just in case the file that was created was there but hidden. I had no problem creating the text file in the directory where the output from Media Encoder is supposed to be.
My suite was fully patched when this was run (except I did install an upgrade to Adobe Reader after this problem occurred when I checked to make sure my software was current).
I used Media Encoder earlier in the day to create a P2 MXF file from the same source file earlier in the day, and have used it to create other output formats.
I am working on a Windows XP Professional machine.
Any ideas?

Quick postscript that may be relevant...
I converted the same file I’m having trouble with to WMV format. It worked fine, but the output file name I wanted to give it was long (more than 8 letters not counting the extension). The name of the file created by Media Encoder was only the first 8 letters plus the extension.
I had no problem manually renaming the file it’s full name (over 20 letters long). It seems Media Encoder couldn’t do that.
That still begs the question why it didn’t work when I tried to create an MXF file only one letter long. Here is the section of log where I tried to do that. As before, it says the file was created. I couldn’t find it.
9/10/2009 5:03:29 PM : Queue Started
- Source File: F:…\NASDAQ\0001DI.mov
- Output File: F:…\NASDAQ\a.MXF
- Preset Used: DVCPROHD 720p 30
- Video: 960x720, 29.97 [fps], Progressive
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:00:26
9/10/2009 5:03:56 PM : File Successfully Encoded
9/10/2009 5:03:57 PM : Queue Stopped

Adobe Media Encoder CS4 Causing Jerky Playback with Speed Changes

Here is an Matrox AVI that was captured in Adobe Premiere Pro CS4. Watching the edited clip with a speed change of 600% looked fine when played in Premiere Pro CS4.
When I export the clip using Adobe Media Encoder CS4 as MPEG2 Blu-ray with a preset of 1440 x 1080i High Quality playback is very jerky. An export of the same clip with normal speed looks great??
Any suggestions would be greatly appreciated
Thanks
Type: Matrox AVI
File Size: 119.9 MB
Image Size: 1440 x 1080
Pixel Depth: 24
Frame Rate: 29.97
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;00;36;27
Average Data Rate: 3.2 MB / second
Pixel Aspect Ratio: 1.3333
Codec Type: MPEG-2 IBP
Bit Depth: 8
Scan Mode: Interlaced - Upper Field First
Actual Image Size: 1440 x 1080
Here are the specs on my workstation
Case: Coolmaster-830
Op System: Vista Ultima 64 Bit
Edit Suite: Adobe Creative Suite 4 Production Premium Line Upgrade
Adobe Premiere Pro CS 4.0.1 update before installing RT.X2 Card and 4.0 tools
Performed updates on all Adobe Production Premium Products as of 03/09/2009
Matrox RTX2 4.0 Tools
Main Display: Dell 3007 30"
DVI Monitor: Dell 2408WFP 24"
MB: ASUS P5E3 Deluxe/WiFi-AP LGA 775 Intel X38
Display Card: SAPPHIRE Radeon HD 4870 512MB GDDR5 Toxic ver.
PS: Corsair|CMPSU-1000HX 1000W
CPU: INTEL Quad Core Q9650 3G
MEM: 2Gx4|Corsair TW3X4G1333C9DHXR DDR3 (8 Gigs Total)
1 Sys Drive: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB
Cache SATA 3.0Gb/s
2 Raid 0: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB Cache SATA 3.0Gb/s Using Intel's integrared Raid Controller on MB

Have you ever upgraded Adobe Premiere Pro in the middle of a project?
By the way I captured the same clip in Adobe software only mode using HDV as a capture settings. The editing mode is Adobe HDV 1080i, 29.97 frames. The results are also jerky. When I render the clip captured it is also very grainy??
Type: MPEG Movie
File Size: 196.4 MB
Image Size: 1440 x 1080
Pixel Depth: 32
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Average Data Rate: 3.2 MB / second
Pixel Aspect Ratio: 1.3333
Thanks for responding so quickly!

Media Encoder CS4 hangs when opening large XDCAM HD MXF files

I am having a problem with Media Encoder CS4 hanging consistently when importing large (18GB) XDCAM HD (25mbps, MPE-2 HD) MXF files. Smaller files are not a problem. This is on a soupped up system, HP XW8600 Workstation / Windows Vista Pro. The same files work fine in After Effect CS4.
Any idea what could cause this?
Thanks.
T.

Yes, I did. Thanks for the tip though.
Thierry Humeau, DoP
Télécam Films, LLC
4400 MacArthur Blvd. NW
suite 201
Washington DC, 20007
o: +1 202.298.0030
c: +1 202-255-8696
www.telecamfilms.com

Media Encoder CS4 - compatability

Similar Messages

Maybe you are looking for