Media Encoder CS4 Question

I use the CS4 media encoder quite a bit for creating FLV content for my web site. However, I noticed that the encoder crashed on me the other day with an error pointing to the media cache. Is it OK to clear the media cache once a week, so I avoid any corrupted files. What are the best practices in emptying the media cache? I know After Effects has a menu option for emptying the media cache, but Media Encoder doesn't. Any help you can give will be appreciated.
Thanks

Thanks....
Man, the link's explanation is more complex than the question!

Similar Messages

Media Encoder CS4 No Error No File (Says It's Created, but It Isn't)

I have tried repeatedly today to encode an QuickTime container to P2 format, and while Adobe Media Encoder CS4 appears to load correctly, do the conversion, and confirm the file creation, I can not find the file that was supposed to be created.
There is no error message. Below is the transcript of the log from one attempt:
9/10/2009 5:38:41 PM : Queue Started
- Source File: F:…\NASDAQ\0001DI.mov
- Output File: C:…\Desktop\0001DI_1.MXF
- Preset Used: DVCPROHD 720p 30
- Video: 960x720, 29.97 [fps], Progressive
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:00:22
9/10/2009 5:39:04 PM : File Successfully Encoded
9/10/2009 5:39:04 PM : Queue Stopped
Only, no where on my computer is there the file “0001DI_1.MXF”. Not only have I looked in the Desktop folder where it is supposed to be. I have searched both hard drives on my computer for that file. This has happened repeatedly with variations of the output file name in the last hour or so.
I have rebooted the machine. I have run error-checking on the hard drive. Even though only log into my with my own account and no one else uses it, I have even created a text file with the same name, just in case the file that was created was there but hidden. I had no problem creating the text file in the directory where the output from Media Encoder is supposed to be.
My suite was fully patched when this was run (except I did install an upgrade to Adobe Reader after this problem occurred when I checked to make sure my software was current).
I used Media Encoder earlier in the day to create a P2 MXF file from the same source file earlier in the day, and have used it to create other output formats.
I am working on a Windows XP Professional machine.
Any ideas?

Quick postscript that may be relevant...
I converted the same file I’m having trouble with to WMV format. It worked fine, but the output file name I wanted to give it was long (more than 8 letters not counting the extension). The name of the file created by Media Encoder was only the first 8 letters plus the extension.
I had no problem manually renaming the file it’s full name (over 20 letters long). It seems Media Encoder couldn’t do that.
That still begs the question why it didn’t work when I tried to create an MXF file only one letter long. Here is the section of log where I tried to do that. As before, it says the file was created. I couldn’t find it.
9/10/2009 5:03:29 PM : Queue Started
- Source File: F:…\NASDAQ\0001DI.mov
- Output File: F:…\NASDAQ\a.MXF
- Preset Used: DVCPROHD 720p 30
- Video: 960x720, 29.97 [fps], Progressive
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:00:26
9/10/2009 5:03:56 PM : File Successfully Encoded
9/10/2009 5:03:57 PM : Queue Stopped

[..\..\Src\Win\WinFile.ccp-754] Error In Media Encoder CS4!

======================================
Adobe Media Encoder has encountered an error.
[..\..\Src\Win\WinFile.ccp-754]
======================================
I have paid a small fortune to get the Masters Collection CS4, and after a few months of using it, I get this error for no reason!
It happens everytime I try to encode files in Adobe MEdia Encoder CS4 (Fully Updated) like music, home videos ect to different formats so I can share them with family.
My system: HP Pavilion DV9700 500GB HDD, 512Mb NVideo Geforce, 4Gb DDR2 RAM, Vista Ultimate x64.
Any help would be greatly appreciated!
Thanks
Justin

I get this error for no reason!
You are wrong. There is a reason. What the reason is, is hard to discern due to lack of information. Look at this link closely, read the included link to the WIKI and reply to the 16 questions asked at the end of the article if you have not yet found the solution with all the steps outlined: Some suggestions

Problem Encoding WMV to FLV with Media Encoder CS4 (but not with CS3)

Hello,
I have been attempting to encode some WMV files with Flash Media Encoder CS4 (I have Adobe Creative Suite CS4 installed) but it has failed, generating this error:
- Source File: C:\Documents and Settings\usf\Desktop\incoming\ch01.wmv
- Output File: C:\Documents and Settings\usf\Desktop\incoming\ch01_3.flv
- Preset Used: Custom
- Video: 624x343, Same as source [fps]
- Audio: MPEG Layer III (MP3), 128 [kbps], Stereo
- Bitrate: VBR, 400.00 [kbps]
- Encoding Time: 00:06:36
5/28/2010 11:26:16 AM : Encoding Failed
Error compiling movie.
Unknown error.
On another computer where Adobe Media Encoder CS3 is installed (with Creative Suite CS3), I experience no such problem. I do notice that when I add the WMV to Adobe Media Encoder CS3, it opens a window that prompts me to use "ffdshow", which will apparently work if it's configured to decode the file. I click "OK" and start the queue in the encoder. A few minutes later I get a successfully encoded FLV file.
I have come to question whether Adobe Media Encoder CS4 should be re-installed, whether the entire Suite should re-installed, or if there is some patch or fix I can install somewhere. Adobe Media Encoder CS4 is installed on my "production" computer which also has Adobe Premiere Pro (CS3) and Adobe Premiere Elements (7).
Could use some advice here.
Glen
P.S. the files will also not export to FLV using Adobe Premiere or Premiere elements...

Again, the reason we are capturing with Windows Media Encoder is because we tried using Live Flash Encoder to capture directly into flash but our equipment wasn't fast enough and it was dropping frames all over the place. We also don't have the space to capture into an uncompressed format because we don't have the available storage, and our events can be 8 hours long or more (each video is about 15 minutes, 20 or more videos)
Ive listened to everything in my workflow and it sounds fine until the outputted FLV file from AME.
WME is capturing at the following specs:
160kbps 48KHz Windows Media Audio 9.2 codec (stereo) 1 pass CBR
1800kbps 1 pass CBR video
29.97 fps
640x360 resolution
buffer size: 5 seconds
key frame interval: 8 seconds
I have verified this with a codec info utility I ran on the wmv files.
AME is encoding with the following specs:
FLV Multiplexing
On2 VP6 codec
620x360 resolution
800kbps 2 pass VBR
100% undershoot at best quality
160kbps stereo MP3 audio
I verified the above with the same codec info utility (gspot 2.70a) and it is all acurate, it also told me that the audio is at 44.1KHz rather than 48 (there was no place to specify this, is this a limitatino of the VP6 codec?)
Yes, these are our source assets. They're being captured either through an XL2 via firewire, or from an analog program feed converted to firewire via a Canopus converter box.
If anyone has any suggestions on how to get rid of this, or a different encoder (either to capture with rather low cpu resources, or to encode into flash) let me know. I can provide a sample of the clipping if you need
Thanks,
Peter

Adobe Media Encoder CS4

Adobe Media Encoder CS4 has one Filter ... Blur , is it
possible to add another and are there any available, specifically
for adjusting gamma.
Thanks

Georges, please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Premiere Pro/Media Encoder CS4 exports 0 KB movie, any solution?

I have a (simple) project in Adobe Premiere Pro CS4 4.2.1 with two video files (same source/codec) and one audio file. The video file starts a few seconds before the audio file starts. There are no transitions and effects, besides filling the left audio channel. However, the problem is that all my attempts at exporting this project to a video file with h.264/aac, PAL widescreen, have been futile.
The Adobe Media Encoder CS4 4.2.0 takes a considerable amount of time (~4.5 hours) and generates files (m4v & aac) of an appropriate size (~2.5 GB), but deletes those files as soon as it is finished with encoding. This leaves me with an empty y.mp4 of exactly 0 KB.
I have fully updated both Premiere Pro and Media Encoder. My system is a MacBook with an Intel 2.4GHz, 4GB RAM, running Mac OS 10.6.
Is there any known solution for this problem?
===== MEDIA ENCODER LOG =====
Tue Jun 29 10:43:09 2010 : Queue Started
- Source File: /Users/Matthew/Library/Caches/TemporaryItems/y.prproj
- Output File: /Users/Matthew/y.mp4
- Preset Used: Custom
- Video: PAL, 720x576, 25 [fps], Lower
- Audio: AAC, 192 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 5.00, Max 6.00 [Mbps]
- Encoding Time: 04:37:55
Tue Jun 29 15:21:06 2010 : File Successfully Encoded
Tue Jun 29 15:21:09 2010 : Queue Stopped
===== END LOG =====

Welcome to the forum.
First, a few questions:
1.) What is the source footage's format/CODEC (both your Video and your Audio)?
2.) Can you tell us about the I/O sub-system on your MB, i.e. your HDD's, their size, speed, free space (very important) and how you have them allocated?
3.) Can you Export to another muxed format, as a test?
4.) Can you Export as non-muxed (Multiplexing set to None) and get two usable elemental/elementary streams? Do each play fine? Again, this is just a test.
As you observe, the two streams are first created, and then when complete, they are muxed into one file with both the Audio and Video stream. Something is causing the muxing to not complete. This could be an issue directly with AME, or perhaps with your H.264 CODEC, or something like free space on your target HDD.
Good luck,
Hunt

Adobe Media Encoder CS4 runtime error

I am wondering why I am getting a runtime error while
attempting to use Adobe Media Encoder CS4...As soon as I launch
Adobe Media Encoder CS4, it crashes I have installed and
reinstalled Flash a couple time, to see if this corrects the
problem, which it doesn't, and just last week it was working
fine...Does anybody have a ideal what is going on?

Don't know if this helps anyone else, bt the runtime errors i have been getting occur when I try to build and burn a blu-ray file. And they happen intermittently. In fact, on this project, I had burned several test blu-rays without difficulty. When I made one minor change on the penultimate version, and tried to burn again, the system crashed with a run time error. Then it crashed 9 more times over the course of the week.
Finally in frustration, I created an interim ISO file in Encore- ie in the build workstream, i selected burn an image file rather than burning a blu-ray disk. After this intermediate step completed, i then did a separate burn in encore but burned from the image file. No snags.
Not sure why but this program has trouble doing a sequence of activities. As it is, I already render and save the file before burning. Now I have another interim step to create an image file before burning.
In my next hardware change, I am going to switch to make Mac and Apple software. Enough of MS Windows and Adobe, the GM and Chrysler of the software industry. Hopefully what my friends tell me is true; that Apple stuff actually works.

Adobe Media Encoder CS4 Encoding Error

I got an error when Adobe Media Encoder CS4 encoding which is the crash of ImporterProcessServer. It crashes the halfway of the encoding process. I restarted my comp and tried several times before but the results still the same. Sometimes ImporterProcessServer did not crash but the encoder failed compiling without any error.
Processor : Intel Core 2 Duo E4600 2.4GHZ
RAM: 2GB
OS: Win7 32bit
Graphic: Nvidia 8600 GeForce 512 mb

First thing to check is what is on the Timeline at about the 50% point. Do you have an odd Asset there?
Do you have a gap in the Video at about that point?
Then, do you have adequate defragmented free space on the destination HDD?
Good luck,
Hunt

Adobe Media Encoder CS4 error

Hi,
I've just purchased Flash CS4 and tried the "Adobe Media Encoder CS4" that comes with it.
When attempting to launch it, I get this (see attachement) error and the program doesn't launch.
Anyone aware of the cause of this error ? How I could get it resolved etc..
Thanks in advance.

Any update on this?
I get WinFile.cpp-754 on CS4 and WinFile.cpp-785 on CS5 trying to encode the same AVI file.
I'm trying to load a 59.94 fps AVI file into PremierPro CS4 and need to convert it to something else (correct?)

Adobe Media Encoder CS4 error in elearning suite trial version

Hi there, I have a trial version of elearning suite 2.5 and I have the error "Thank you for using Adobe Media Encoder CS4. The Adobe product that installed Media Encoder has not activated. Please launch and activate that Adobe product before continuing to use Media Encoder". My searching points me to a full reinstall, but is there an easier fix? Currently running Mac OS 10.5.8. Thanks.

Any update on this?
I get WinFile.cpp-754 on CS4 and WinFile.cpp-785 on CS5 trying to encode the same AVI file.
I'm trying to load a 59.94 fps AVI file into PremierPro CS4 and need to convert it to something else (correct?)

Media encoder CS4 can't do what Flash Encoder CS3 does????

Quad 2.66 Xeon MacPro / OS 10.5.8 / CS4 all updates applied. / 24GB RAM
Adobe Media Encoder CS4 won't import .wmv videos.
Flash CS3 Media Encoder does it just fine.
What's the deal? Why remove the support?
I do have Flip4Mac installed as well as Perian. Any chance these items allow the CS3 encoder to work, but not the CS4?

Quad 2.66 Xeon MacPro / OS 10.5.8 / CS4 all updates applied. / 24GB RAM
Adobe Media Encoder CS4 won't import .wmv videos.
Flash CS3 Media Encoder does it just fine.
What's the deal? Why remove the support?
I do have Flip4Mac installed as well as Perian. Any chance these items allow the CS3 encoder to work, but not the CS4?

Adobe Media Encoder CS4 doesn't encode audio

I'm having trouble getting the Adobe Media Encoder CS4 to
work properly. I have tried multiple files of different lengths but
end up with the same output. Nice video encoding, but the audio
starts and then cuts out after a couple of seconds. The longer the
video, the shorter the audio works. The logs don't report any
issues. Anybody have any ideas?

I have the same problem just trying to crop an FLV. (Encoding from FLV to FLV on Snow Leopard).
The audio just dies about 5 seconds in (the clip is 28 seconds long).
Sucks. I wish I could find the original .mov
I wish I wasn't forced to recompress the audio.
I've tried various settings all night - most settings result in no audio whatsoever.
Also, Media Encoder alters the mod date of my original file. Why?
I'm really frustrated with this software.

Media Encoder CS4 won't launch

Hello,
I am trying to use Media Encoder CS4 but it will not launch. It seems to get hung up on "ImporterQT.bundle".
I am on a Mac G5 Dual 2.5 GHz Power PC running OSX 10.5.7
Please help! I'm on a really tight deadline.
Thanks!

ImporterQT.bundle may be missing or corrupt
uninstall Media Encoder using the package in \Applications\Utilities\Adobe Installers
then reinstall.

Media Encoder CS4 won't update - Mac

I have CS4 and Adobe media encoder 4.1.0 will not update,
I have downloaded it via software update and then it installs and after a check of software update it asks me to update exactly what I just updated.
Does anyone know how I can sort this issue out?

Hi Jagan,
Thanks for the response.
After installing the CS4 Design Suite Premium, I moved all the apps/folders to a newly-created "Adobe" folder inside my applications folder. I always ran the Updater to check and download the updates. I didn't pay attention to the success of the updates, since they always ended with a dialog box that said "Finished". It's only when I noticed that it was downloading the Media Encoder update over and over again, that I got suspicious. When I looked in my Applications folder, The "Apple" folder I created was still there, but there was also a new "Media Encoder CS4" folder, which was not there before.
I deleted this new "Media Encoder CS4" folder and ran Updater again. Updater then downloaded the new version and installed it. Unfortunately, the Media Encoder CS4 in my "Apple" folder was not updated to the new version, but that duplicate Media Encoder CS4 folder was back
I browsed through the other messages here about update problems, and I decided to re-install the Media Encoder CS4. I trashed the duplicate folder and put in the DVD. In order to re-install the Media Encoder, I had to also re-install Flash CS4. I did so, then ran the Updater again (I did not change the location of any of the re-installed programs prior to the update). Lo and behold, Media Encoder was updated correctly! I continued the remaining updates to get my software back to the current versions. I thought I was home-free, but unfortunately I wasn't
Although Media Encoder was updated correctly, now Drive Manager and Acrobat Reader are not getting updated. The update installer says that the updates completed successfully, but when I run the Updater again, it identifies those same 2 programs as needing updates.
I downloaded the updates manually, but installing them did not update the programs.
If you have any other ideas, I would greatly appreciate it!
Mike

F4v encoded with Adobe media encoder CS4 (longer than 71 minutes)

Hi I don't know if this is the correct place for this post. So apologies me if this is the wrong place.
Encoding with Adobe Media Encoder CS4 (4.2.0.006 and 4.0 too)
Source: MOV (DVPAL) longer than 71 minutes
Dest: F4V (H.264)
Result: freezed frames and only plays audio at 01:11. Media Player goes crazy and starts showing some diferent parts freeze frames.
In Quicktime crashes, in VLC the same of MediaPlayer. Sometimes the audio starts to downsampling and sounds like the pitch goes down.
Totally agree with this other post: http://forums.adobe.com/thread/580391
(extract)
I recentlly encoded afew F4V using Adobe Media Encoder Cs4. MOst of them are working properly but I don't know why, all of my video that are longer than 71 minutes seems to have trouble playing back. They all Freeze when they reach 71 minutes or if I navigate pass this point.
thanks and help us please!
Kik

Thanks for the interest.
I'll try to explain all details:
MacPro 1.1 (mid 2006) under Mac OS X 10.4.11 (Darwin 8.11.1 kernel)
System files: journaled HFS+ and a unix based NAS (under samba connection)
I have all material on the NAS and also I make the transcoding over it. Is a simple mov containing DV PAL WIDE interlaced 25fps with stereo audio. typical settings with nothing out of DV PAL standard.
The version of MediaEncoder CS4: 4.2.0.006 (it happens with older versions too)
The settings of MediaEncoder are:
Audio: AAC stereo 44,1 kHz
Video: F4V. MainConcept H.264, fps like source, profile high, level 4,1. CBR compression.
The problem only appears with videos longer than 71 minuts. At 01:11 starts with crazy problems. It seems like the player have some read or problems.
Tell me if you need some other kind of information.
thks

Media Encoder CS4 Question

Similar Messages

Maybe you are looking for