Media Encoder doesn't recognize Behringer USB mixer

I just purchased a Behringer Xenyx X1222USB mixer to use for live stream events using Flash Live Encoder on my MacBook Pro. Flash Encoder doesn't recognize the USB input from the mixer. Other I know the computer recognizes it since I went into the Audio Settings and can see the USB input there with audio levels.
I use Yosemite platform. Any help needed as soon as possible.

So, it looks like Media Encoder is stuck in a trial version? The only formats available are indeed .f4v, .flv, .mp3 & h.264. Is a reinstall of Media Encoder the fix?

Similar Messages

Adobe Media Encoder Doesn't recognize .prproj files

I am absolutely losing it here. I have read posts on various forums for hours, not only can I not find a solution, I can't find anyone who has this same problem. I'm running CS4 on a Mac and when I try to export from premiere, Adobe Media Encoder opens, then nothing happens. The file is never added to the queue, it just sits there. If I open Adobe Media Encoder manually then click add and try to select a premiere project, the file is grayed out. I changed the dropdown menu for file types to be "all types" and I click on a premiere file and it just pops up an error message saying the file cannot be imported. Same thing if I try to drag the file in. I can do absolutely nothing with AME.
I've seen plenty of people saying AME crashes midway through rendering or people saying they get an error saying to check if the source has been moved or deleted. I don't get any of that. I have nothing. It doesn't show up in the log or errors in any way.
The most annoying thing is that it used to work. I exported several files this way. I did not change any settings though, I even went and restored all the default settings. Still nothing. Its not just the one file, I've tried lots of different files, none work. I even reinstalled premiere, after effects, and AME and nothing changed.
I'm at a complete loss and I need to get work done and I wish I could post lots and lots of curse words here...

Hi,
I use CS3 on a PC so I've no experience with mac problems...
However, even if I had a mac I would ask you first a little more about your computer....
I have heard of memory chips going bad on a computer and suddenly that causes things not to work...but there's no sense just guessing...
Try to tell as much as you can about your computer and about the assets you are using.
Since it used to work and now it doesn't , can you think of anything you added or changed on the computer ?
Sometimes adding software or codec packs or hardware can sorta change things on your computer enough to make weird things happen...
Anyway, give as much info as you can
I think there's threads here about what sort of info would be best to supply if you don't know much about your computer ...
Rod

Media Encoder doesn't recognize custom export settings from Premiere Pro CS6

When I use export media in Pr CS6 and use custom settings (H.264) and click Queue when it arrives in Media Encoder none of the custom settings are there, instead it always defaults to .F4V.
Here is a screenshot of custom settings in Pr CS6:
And here is what happens in Media Encoder:
Thanks for your help!
Nick

So, it looks like Media Encoder is stuck in a trial version? The only formats available are indeed .f4v, .flv, .mp3 & h.264. Is a reinstall of Media Encoder the fix?

My iMac doesn't recognize by usb keyboard since I installed security update 2015-002

I installed Security Update 2015-002 on my iMac and since then it doesn't recognize my usb keyboard (I'm typing this with a bluetooth keyboard). I rebooted, unplugged and plugged back in the keyboard all to no avail.
My system:
Yosemite 10.10.2
Mid 2011 iMac 27"
3.4 GHz i7
16 GB RAM
Keyboard: Apple extended USB
Any help would be greatly appreciated.

Mine works okay.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

What specific KB?
Do you know it works?
I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

Media Sync Doesn't Recognize Device

Just got an unlocked Curve 8320. Inserted a media card, and downloaded Media Sync to my PC, not the whole Desktop Manager. Media Sync now doesn't recognize my device; have tried this tons of times! And, my computer itself doesn't recognize it as a USB drive as well. My device does have the 4.5 software loaded. Is it possible to just drag and drop music files to my microSD card since I can't use Media Sync? Also, does my blackberry have to be connected via USB for me to use Roxio Media Manager? Or can I just insert my media card? Didn't want to download the whole Desktop Manager w/ Media Manager since it already doesn't recognize my device. Aagh!
Message Edited by flamencoqueen on 05-12-2009 05:41 PM
Message Edited by flamencoqueen on 05-12-2009 05:47 PM
Message Edited by flamencoqueen on 05-13-2009 12:27 AM
Message Edited by flamencoqueen on 05-13-2009 12:30 AM

Windows Vista
Have not tried another cable, but the phone CAN charge using this same cable
Laptop computer
Using side USB port, have only 2 on the side
Under Universal Serial Bus Controller: Intel Family USB Universal Host Controller-2830, plus other prior ones installed
USB Root Hub
Also, I do not have Desktop Manager or anything else downloaded. Without having that stuff, should my computer be able to recognize my Blackberry; at least as a USB drive?
Message Edited by flamencoqueen on 05-13-2009 12:42 AM

CS4 Media Encoder doesn't launch

Have been exporting and rendering files in CS4 for years and for some reason, yesterday, ADOBE Media Encoder stopped launching from the export window of PPRO? I still get the setting box, save box, but when I click okay, nothing happens; ME does not automatically launch. ME is still there, I can bring it up manually, but it doesn't have the export file in it.
Anyone know why this would drop out suddenly? No updates/reinstalls, or weirdness from the day it worked to the day it didn't?
Plus, anyone know of a way of getting a PPROJ into ME without going from PPRO? A short cut, if you will, of dropping a project into an already open ME?
I have searched around for answers to this but have not found a similar issue (I did not have CS3 before, so that whole thread doesn't seem to help me)
thanks everyone,
Planetarium Guy

I am afraid I never did get any answers. I uninstalled everything (I have the whole suite) and reinstalled it.
Then, when I wanted to export from PPRO, AME did launch but didn't have the sequence auto loaded in (as it used to); it just came up and I still had to manually load in the sequence. After I did all the updates on the reinstall, even that stopped happening; AME stopped launching automatically.
So I have been manually bringing up AME and manually loading in the sequences and then opening the settings from AME to configure the export settings I want (as it doesn't remember what you had saved in the export window of PPRO).
I wish I had an answer for you, but it looks like this work-a-round is what I will using for the near future,
Au revoir,
Cam
Cameron Cronin
Public Programs
HR MacMillan Space Centre
1100 Chestnut Street
Vanier Park, Vancouver BC, Canada, V6J 3J9
www.spacecentre.ca
P Please consider the environment before printing e-mails
Who gave us the Stars?
The Constellation Makers
Now playing
www.spacecentre.ca

CS4 Media Encoder doesn't render Quicktime at all

The CS4 Media Encoder will render H.264 and FLV, but doesn't render any form of Quicktime at all.
The Queue loads the project, pretends to render, but does not show progress frames. Seconds later (way too early!) there is a green checkmark that the render completed successfully. The log file looks successful with essentially the same content as for H.264 and FLV.
For example this log file shows a 1-minute sequence "rendered" in 30 seconds -- normally takes 3 minutes -- and no .mov was created.
10/29/2008 7:09:16 AM : Queue Started
- Source File: C:\DOCUME~1\MARATH~1\LOCALS~1\Temp\happyValleyBeijingMoreHighlights_5.prproj
- Output File: C:\Documents and Settings\Marathon Runner\Desktop\china\finished\happy valley beijing\more highlights\Sequence 01.mov
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate: DV/DVCPRO - NTSC
- Encoding Time: 00:00:00
10/29/2008 7:09:45 AM : File Successfully Encoded
10/29/2008 7:09:46 AM : Queue Stopped

>always save the project before you export
Very good advice.
I would also say, save your project after any edit that you feel you can't afford to lose.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Qosmio G30-163: Windows media encoder doesn't recognise video device

I cannot get Windows media encoder to recognise my video camera connected to S-video port (Qosmio G30-163).
I get similar problem with Marratech pro webconferencing application (it crashes after 15-20 second if I try to use it - during the time the application is frosen - in configuration I can see the test picture/video).
If I use InterVideo WinDVD Creator 2 Platinum bundled software for capturing video it works just fine.

Hi Nesko
In my opinion you see this issue a little bit wrong. You are right about some standards but you must know that every hardware manufacturers dont care much about that. Other way Toshiba as notebook producer can not test all cams and external devices with the unit and also all software you can find on the market. It is a mission impossible.
Qosmio is a multimedia unit and if you read specification about that you will see that you can do everything listed there (watch TV, connect camcorder and create own DVD movies etc.). Every one of us has some specific and unique wishes but nobody can guarantee that everything you want will work.
For example: since almost a year I have Qosmio G20. I have tested it with my camcorder, with VHS recorder using it with preinstalled and also third part software and for every situation I have found solution and it work somehow.
I really dont know which cam you have but if you want to have web conferencing without any problems you should by USB webcam with highest resolutions and frames per second. Web cam will be recognized and installed very fast and you can use it any time. Sorry but web conferencing via MCE and cam is not known to me.
Anyway you can try to contact support. Maybe they have some magic\solution. If you will find out how it works please write again. I am really interested if something like that is possible.
Good luck!

My new 24in imac doesn't recognize my usb external hard drive- snow leopard

i was attempting to do a new time machine back up on my new mac but it won't recognize the usb external hard drive (kaser 250gb). i used it frequently on my old g5 imac, no problems. i plugged the hard drive into my g4 ibook and it recognized it right away. i followed the apple tip of pulling the power plug out of the wall power socket and pulled all the usb cables out as well (i have the wireless keyboard). i let it rest for over 5 minutes and only plugged in my wacom stylus and usb external hard drive. still nothing. and it doesn't show either in disk utility. i also downloaded as per another thread the 3g ntfs system preference but to no avail. the only thing i can of doing is erase and reformat my external on my ibook, but i don't want to risk loosing the data without a back up.
anything else i can try? (before i buy time capsule) thanks

i just checked again by plugging the external into my ibook g4 and checked how it was formatted - mac os extended (journaled).
Then the 3GFS software is not required at all.
i have an idea, not sure if it will work and it will have to wait a couple days until i get my firewire back from a friend, but this is what i'm thinking: my intel imac has a 1tb hard drive. could i use target mode between my imac and ibook? with my ibook i'd attach the external hard drive, then using the firewire and target mode start it up. hoping that the ibook hard drive and the attached external hard drive would show on my intel mac for which i could copy over the external back ups onto my imac. once completed, i could erase and reformat the external on my ibook and then try again on my imac to see if it appears on my desktop. do you think this might work (even though it is correctly formatted already?)
I use Target mode on a regular basis for mounting the internal drive on a Mac to transfer or salvage data. I don't know if you will be able to connect to an external drive on the Target computer. There's not usually any reason for this and I don't know if the Target Mode will enable the Logic board to deal with the USB ports and transfer data. I kinda doubt it, but other more experienced users can jump in here.
I don't think the problem with your external drive is the format, since you've already checked it and it is already formatted for a Mac. Intel Mac's will mount drives formatted by a PPC Mac with no problems, unless your OS doesn't support the chipset in the USB case that connects to the drive. There are some USB drives that are known to not work well with SL but worked fine with Leopard.
You can buy a cheap USB case (about $30) and move the drive from the old case to the new case, or buy a USB to IDE adaptor cable (about $20), or you can buy a larger external drive that will work on the iMac and use the G4 to transfer the date from the old drive to a new one. Or you can take both drives to a friend with a Mac and use Disk Utility to restore the USB drive to a partition on the Firewire drive. That doesn't fix the USB drive to work with your new Mac, but unless the vendor comes out with a firmware fix, I think that's a lost cause anyway.
other than the above, i may just go buy a 1tb time capsule,
I would not be getting a Time Capsule to back up a single computer. Wireless backups are a lot slower than FireWire or USB (of course, it's the initial backup that takes so much time). If you do have several Mac's that need a TM backup volume, then the Capsule can help you out. It is supported by Apple (and there are a lot of users here in the forums). I'm using a ReadyNAS device for network backups, but it is not supported by Apple, and I have to rely on NetGear for fixes if an OS update breaks my backup system.
BTW, it's a good chance that a TC device will be able to see and mount your USB drive. The incompatible chipset problem with some drives seems to be limited to the USB drivers in SL which the TC is not running. That's why I said that a USB hub may also let you see your drive, the problem is there's no guarantee's...

Media Encoder doesn't start rendering when I queue from Premiere Pro

I have Premiere Pro CC and Media Encoder CC, and it seems the render in Media Encoder never starts or takes a very long time to process.
When I start exporting on Media Encoder, the preview shows up, but the encoding time stucks at 00:00:00 or 00:00:01.
If I export videos using Premiere Pro, the video exports just fine. It just that Media Encoder is not working.
This happens when I use Audio Effects on my audio files. I've been exporting audio separately and re-importing them into my Premiere Pro project so that Media Encoder will export my videos. But this takes more time to make videos.
Anyone having this issue?

[Moved to AME forum.]

Upgraded to CC 2014 and Media Encoder doesn't work now.

Using a mac with mavericks, all updated. Upgraded to Premiere Pro CC 2014 and Media Encoder CC 2014. But when I want to launch it... it won't open.
Help?

JUST FOR MAC USERS - Some 10.9.3 links
-next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0
-Mac 10.9.3 and CS6 https://forums.adobe.com/thread/1480238

Adobe CS4 Media Encoder doesn´t encode Quicktime Photo-Jpeg

hi,
i´ve seen similar entries in that forum,but none fits to my problem.. so i hope to get some help. i´m working on a suitable vista-64bit machine with premiere pro cs4.1 and quicktime 7.6 (checked for updates today again).
i´ve got a 9min project in my timeline,i want to export it as a quicktime with the photo-jpeg-codec. the media encoder is loading the project,then it does nothing,no rendering at all. i wonder why,because the default setting for qt-dvpal works pretty well and fast(,but the quality is bad).
Now i´ve opened the project in aftereffects and used it to render,but it took about 40min.... this can´t be the solution. does anybody know better?

If memory serves, that option is currently broken through Premiere. AE may be the only way.

Encore Batch Transcode - Media Encoder doesn't perform

I use Encore to fit client video tapes to DVD. The 'Automatic' settings generate the best results by making use of the disc's capacity while maximizing bitrates. Encore does not have a batch option for multiple projects, therefore it is necessary to manually start transcoding for each disc project, save, open the next project and repeat.
My hope was to batch encode multiple video files from multiple Encore projects with Media Encoder, but it seems that Media Encoder requires the Encore project to be open as well. Otherwise, the transcoding within Media Encoder stops when Encore is closed or a new Encore project is created / opened.
I find this to be counter productive, given that timelines in Premiere can be sent to the Media Encoder which frees Premiere to be used for other video editing. Additionally, Encore can not send a file Media Encoder without encoding settings being set witnin Encore - thus, I am not finding the advantage of having Media Encoder be a part of the workflow.
Aside from calculating the bitrates for each video file in the project and transcoding the files seperate of Encore, are there any suggestions to using Encore and Media Encoder for batch processing?
Thank you in advance.

Agreed. My outreach to the Adobe community is to locate any alternate solutions I've not thought of. I'm sure others have run into the same predicament I have outlined.
I'm open to solutions that are not involving Adobe products. Although, the encoding quality from within Encore is better than most other stand alone apps available on the market. Thus, my desire to stick with it, if possible.

Flash Media Live Encoder doesn't recognize system speakers

When using Adobe Flash Media Live Encoder, it doesn't seem to recognize my system speakers, so I can't record system audio. Any suggestions?

Please post of FMLE forum(http://forums.adobe.com/community/flash/flash_media_live_encoder) for quick and correct response on this

Media Encoder doesn't recognize Behringer USB mixer

Similar Messages

Maybe you are looking for