Media encoder freezes after 4.2 update installation

Hey guys,
I´m in a middle of a huge project and I updated premiere and media encoder to a new 4.2 version. After that I can´t get anything out of premiere cause every time I try to export media encoder totally freezes after couple of seconds after I´ve pushed start queue. I can´t do nothing but to force to quit. It happens while it is still loading the project and haven´t started to encode yet. What´s the problem here?
I´m on mac pro 8-core and cs4 master collection

How long did you wait before force quitting? If it was only a minute or two, try longer.
If that doesn't work, then remove all of the old queue items from the AME.
Then save your Pr project, and clean the media cache database from Edit | Preferences.
Reboot and try again.
If all of that fails, then trash your Pr and AME preferences and try again.
-Jeff

Similar Messages

Adobe Media Encoder CC 7.2.2 Update Installation failed. Error Code: U44M1P7

So, I get this strange error when I try to update AME CC 7.2.2. What to do?
Adobe Media Encoder CC 7.2.2 Update
Installation failed. Error Code: U44M1P7

[ Mac 10.9.3 / Indesign CC update fail / Premiere update fail / Adobe Media Encoder 7.2.2 update fail ]
AME:lle ei ole omaa unistalleria, vaan sen asentavat muut CC:n ohjelmat käyttöönsä.
Mulla ei onnistunut ID CC:n ja Premierin päivitys. Niihin olisi ollut tulossa vain tuo AME:n päivitysosa. Ainakin mulla ongelmia näytti aiheuttavan MCMHMPEGVideoCodec.framework, joka esti AME:n päivittämisen. Poistin sen käsin AME:n sisältä.
Poistin Premieren (uninstall) ja asensin sen uudestaan. Buuttasin koneen. Sen jälkeen molempien päivitys onnistui.
There's no separate uninstaller for AME. My ID CC and Premiere couldn't be updated (for the AME7.2.2 update). MCMHMPEGVideoCodec.framework seemed to be the factor.
I uninstalled Premiere (only), after having manually removed MCMHMPEGVideoCodec.framework from inside AME. After boot I installed it again and voilà, both (ID & Premiere) updates went trough fine. The MCMHMPEGVideoCodec.framework was on place inside AME too.

I cannot run Adobe Video Encoder, I get this error: ' Adobe Media Encoder CS6 6.0.1 Update Installation failed. Error Code: U44M2P7'

I cannot run Adobe Video Encoder, I get this error: ' Adobe Media Encoder CS6 6.0.1 Update Installation failed. Error Code: U44M2P7'

Hi
Uninstall the Adobe Application manager from your computer.
and download the latest version of the AAM from the below mentioned sites.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774- For Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773 - For Windows
Once installed , Then try to update the application by launching the application and Help--> Update
Hope It Helps
Thanks

Update Failed Adobe Media Encoder CS6 6.0.2 Update Installation failed. Error Code: U44M1P7

Macbook Pro
Software OS X 10.9.1 (13B42)

See if the following documents help:
U44M1P7 - Updates :
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
U44M1P7, U44M2P7 - Creative Cloud Help / Can't apply Extension Manager update 6.0.2 | Mac OS :
http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manager-update.html

Adobe Media Encoder CS 6.0.2 Update Installation failed. Error Code: U44M2P7

I also tried to download and update manually and get the same error.

Hi
Uninstall the Adobe Application manager from your computer.
and download the latest version of the AAM from the below mentioned sites.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774- For Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773 - For Windows
Once installed , Then try to update the application by launching the application and Help--> Update
Hope It Helps
Thanks

Adobe Media Encoder CS6 6.0.3-Update Beim Herunterladen dieses Updates ist ein Fehler aufgetreten. Schließen Sie die Installation und wiederholen Sie die Installation zu einem späteren Adobe refuses support. I've paided for the product but they don't care

Adobe Media Encoder CS6 6.0.3-Update
Beim Herunterladen dieses Updates ist ein Fehler aufgetreten. Schließen Sie die Installation und wiederholen Sie die Installation zu einem späteren Zeitpunkt. Fehlercode: U43M1D204

Ja wie gesagt es hat davor auch ohne Probleme Funktioniert nur war ich gezwungen das System neu zu Installieren und ab dann konnte ich die da oben genannten Updates nicht mehr Installieren. Ein Mac ist zwar eine schöne Sache kommt aber für mich nie in Frage da ich mein PC als Arbeitsrechner und Gamer Rechner nutze und das meiste läuft halt nicht auf einen Mac und man müsste manche Programme neu Kaufen, das sehe ich überhaupt nicht ein, und meine Anwendungen werden aus Prinzipien nicht für Apple Produkte entwickelt da verdient man kaum etwas... aber das muss jeder für sich entscheiden. An eine neue Version habe ich eventuell nächstes Jahr gedacht aber auch nur die CS6 ob man das brauch ist die Frage da CS 5 genau macht was es soll. Das Modell mit der Adobe Cloud hat zwar denn Vorteil das die Programme Aktuell sind aber man muss Monatlich dafür Zahlen und CS5/CS6 oder älter brauch man nur einmal Kaufen. Darüber hinaus finde ich eh das Adobe so eine richtige S*** ist wenn es um Support ältere Programme geht so zeigt Adobe meiner Meinung nach das Ihre Produkte nichts wert sind zumindest macht es den Anschein. Aber wie gesagt, bin ich hier um Hilfe zu bekommen um das Problem zu lösen ohne ein neue Version zu kaufen, das ist ja bekanntlich die einfachste Lösung, aber wenn Informatiker auch so denken würden dann würde es sehr schlecht aussehen... und als Anmerkung am Rande, es wäre ja nett wenn man mir denn Link dieser Updates zukommen lassen könnte um die Updates Manuell zu Installieren.
"Aber wie sollen wir denn Programme testen auf Hardware und OS, die es erst in ein paar Jahren geben wird."
Dies kann man in voraus natürlich nicht aber in nachhinein geht das und Software Entwickler denn etwas an Ihre Produkte liegt, machen das nachhinein auch und passen gegebenenfalls Ihr Produkt an.
PS: CS 2 läuft ebenfalls auf einem Windows 8.1 rechner ;-)

Adobe Media Encoder CS6 6.0.3-Update Beim Herunterladen dieses Updates ist ein Fehler aufgetreten. Schließen Sie die Installation und wiederholen Sie die Installation zu einem späteren Zeitpunkt. Fehlercode: U43M1D204

Adobe Media Encoder CS6 6.0.3-Update
Beim Herunterladen dieses Updates ist ein Fehler aufgetreten. Schließen Sie die Installation und wiederholen Sie die Installation zu einem späteren Zeitpunkt. Fehlercode: U43M1D204

See if the following discussion helps:
update file size mismatch error code U43M1D204 | Adobe Community

Adobe Media Encoder Freezes

I am using Adobe Premiere Pro CS4 V4.2.1 on a Windows 7 64-bit system. I have an Intel Core i7 processor running at 3.1 GHz, 12 GB of DDR3 RAM running at 1413 MHz, an nVidia GeForce 260 core 216 graphics card, and a video disk consisting of 2 WD 7200 RPM HDD striped as a RAID 0.
Encore was crashing the computer everytime I selected the Build tab and clicked on the Blu-Ray button. This was solved by updating the Sonic Solutions PX Engine.
Now I have problems with the AME. I am working on a 2 Hr 39 Min project with .mp4 clips which Adobe's "Get Properties For" recognizes as XDCAM EX files NTSC, 1080i, 1920X1080 at 29.97 FPS. My preset is selected accordingly.
I have seen multiple posts about Adobe Media Encoder freezing but never found a definitive answer. I have gone as far as doing a clean install and reinstalling PrPro but nothing has changed.
The same thing happens when I try to build an H.264 Blu-ray disk image in Encore or whether I try to render the timeline in Premiere Pro CS4. The transcoding proceeds normally and the orange progress bar progresses for the first 3 - 3 1/2 hours. All 8 processor cores are running temps of 56-60 degrees Centigrade. After 3 - 3 1/2 hours the processor core temps fall to 36-40 degrees and there is no further progression of the orange bar over the next 3-4 hours. At that time the transcoding of Sequence 1 is about 30% complete. I then hit the cancel button and the busy ring spins and spins for about 10 minutes. Then a Windows pop-up says the program is not responding and asks if I want to close the program.
I had an almost identical project when I was using Windows Vista 64-bit and PrPro CS4 on the very same computer, but before the V4.2 update came out, and did not have any problems at all. I have been using Premiere Pro for about 14 years and have never encountered crashes like I am having now.
Hopefully somebody has the answer for this???

I am no expert but I had this happen also.
It turned out to be a bad video clip.
Have you rendered the project? (Sequence>Render Entire Work Area (Timeline must be your active box I believe))
Does it finish or hang?
If it hangs up you most likely have a bad clip or empty space.
The experts will be able to give you more to go on but that may get you started.
Also, I never trust the new Windows 7 "not responding" popup.
I always go to task manager and have a look, if I wait for something I know should take a long time it is almost always a false popup.
Watch for the ImporterProcessServer.exe *32 process. If it takes up a full core worth of processor percentage, you most likely have a problem with a clip. (I am willing to back off that “opinion” but it holds true for me.)

Recent Media Encoder 2014 and Premiere CS6 Updates Fail

For the past month or so the Media Encoder 2014 and Premiere CS6 updates are failing to install within the App Updater. The error message is U44M1P34.
What's the solution?

Here's an extract:
12/19/14 07:11:50:073 | [FATAL] | | OOBE | DE | | | | 33680 | Payload 'Adobe Media Encoder CC 2014_8.0.1_AdobeMediaEncoder8AllTrial 8.0.0.22 {843B3BFA-BA88-4788-856E-1289F0846449}' information not found in Media_db.
12/19/14 07:11:50:074 | [INFO] | | OOBE | DE | | | | 33680 | :: END TIMER :: [Total Timer] took 750.765 milliseconds (0.750765 seconds) DTR = 255.739 KBPS (0.249745 MBPS)
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 | -------------------------------------- Summary --------------------------------------
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 | - 1 fatal error(s), 0 error(s)
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 | Win OS version: 6.2.0.0 64 bit Type: 1
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 |
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 | FATAL: Payload 'Adobe Media Encoder CC 2014_8.0.1_AdobeMediaEncoder8AllTrial 8.0.0.22 {843B3BFA-BA88-4788-856E-1289F0846449}' information not found in Media_db.
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 |
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 | Please search the above error string(s) to find when the error occurred.
12/19/14 07:11:51:075 | [INFO] | | OOBE | DE | | | | 33680 | These errors resulted in installer Exit Code mentioned below.
I'd attach the file but don't see how to do that in a reply.
- Mark

For some reason, I can't compile a video or image sequence anymore with Premiere, Media Encoder, or After Effects... All CC

I have been working on a video for awhile now and I've recently noticed that my .flv export format has been removed from my choice of encoders. I export from Poser Pro Game Dev to Png Image Sequence. I organise a cam angle in After Effects...I re render out to a png image sequence.. continuing to hold quality. Then when a scene is done; I use Premiere to export a 1080 by 720 wmv format 29.97. But now I can't encode from Premere, Media Encoder, or Affter Effects. Please ...Any help would be much appreciated.

Hi,
I have been working on a video for awhile now and I've recently noticed that my .flv export format has been removed from my choice of encoders.
Check this for more information: removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro | After Effects regio…
But now I can't encode from Premiere, Media Encoder, or After Effects.
What exactly happens when you try to export?
Thanks,
Rameez

Adobe Media Encoder CC (7.0.1) Update

Hi all,
The Adobe Media Encoder CC (7.0.1) update is now available.
See this post for details, including how to install the update:
http://blogs.adobe.com/aftereffects/2013/07/adobe-media-encoder-cc-7-0-1-update-available- several-bug-fixes-for-closed-captions-h-264-exports-and-more.html
Kevin

Does the AME not support CUDA like Premiere Pro?
It used to in CS6. It does not in CC7.
Direct export may be the better way to go.

Using Adobe Media Encoder with After Effects and ExtendScript

Hi,
I'm trying to automate the process of encoding a video using the Adobe Media Encoder. The project I'm working on includes allowing a user to upload a video and having that video then be encoded in different formats. I'm very new to After Effects and ExtendScript, but the two ways I see of doing this are:
1) Use ExtendScript to fire the Adobe Media Encoder through After Effects, using the 'Add to Adobe Media Encoder Queue' function. I'm not sure if this is possible or not.
2) Bypass After Effects all together and use the 'watch folder' function in Adobe Media Encoder and upload the files directly to that folder.
I'd prefer to go route 1, if that's possible, but I'm not sure it is. I was thinking that I could write a script to work with Adobe Media Encoder to encode a given video, but from what I've read, ExtendScript isn't currently supported by Adobe Media Encoder? This is true? What would be the best way to go about accomplishing this?
Thanks.

I think you will have a much easier time just using option 2. I have to ask, why do you want the files to go through After Effects anyway? If you are just taking a file and converting it to ## different formats...the watch folder setup in AME would be super easy to setup.
All you need to do is ensure the user submitted files end up in a certain directory -- make that folder your watch folder and create a second folder within that one called 'encoded' or something along those lines. That way as long as AME is online and watch folders are active....you won't have to do a thing.

Adobe Media Encoder CS6 (6.0.1) update available

The Adobe Media Encoder CS6 (6.0.1) update is available.
It has bug fixes and some new features.
You'll see from the post above that one of the features is left somewhat unexplained for the moment. That's because we wanted to get the bug fixes for Adobe Media Encoder out as soon as possible, rather than hold this update and wait for it to coincide with certain other events. Stay tuned. We'll have more information about that new feature quite soon.

I'm having a problem with Media Encoder 6.0.1 - it will encode for a few minutes, then slow down and sit, and then stop with an error (Error compiling movie. Unknown error). This happens with both h.264 and MPEG2, exporting 1080p. This is with Windows 7, and the Task Manager shows the used memory increase and the CPU usage increase when ME starts, and when it slows down the CPU usage stops and the memory usage goes down.
(When it stops with the error it makes a loud noise, like a goat dying! Must be the programmers idea of how to notify there is an error!)
This is happening on two different computers running Production Premium CS6 , and is pretty consistent between the two. I don't know if ME 6.0 had this issue, only had CS6 a few days before the 6.0.1 update and may not have exported a file. There have been no encoding issues at all with CS5 and CS5.5.
Any ideas what is causing this - something in the setup? A bug?

Adobe Media Encoder CS5 5.0.1 Update is not applicable

while running the update manager, i got the message:
the following updates were unable to install. If you wish to install this updates, please fix the problems below and retry:
Adobe Media Encoder CS5 5.0.1
Update is not applicable
anybody else received this?
Any idea what or how to fix?
tnx

I am also having the same issue.
Everytime this update is coming and im unable to update it...

24p to 29.97i in Premiere, Media Encoder or After Effects?

Sorry to bring up a much discussed topic, but as I looked on the web and in the Adobe forums I got sort of lost in the tangle of discussion about how to best take a 24p sequence in Premiere and convert it to 29.97i for broadcast. I feel like this is something that Premiere might be able to do? Or maybe Adobe Media Encoder? I generally see from other forums and posts that this is done in After Effects, an app I have never even opened. So if the answer is that I need to use AE, then I'm hoping for some detailed guidance or perhaps a tutorial video? Though as I say that I know that certainly sounds rather demanding
Any comments or assistance would be greatly appreciated!
Thanks much,
Bradley

Hi,
I have been working on a video for awhile now and I've recently noticed that my .flv export format has been removed from my choice of encoders.
Check this for more information: removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro | After Effects regio…
But now I can't encode from Premiere, Media Encoder, or After Effects.
What exactly happens when you try to export?
Thanks,
Rameez

Media encoder freezes after 4.2 update installation

Similar Messages

Maybe you are looking for