Media Encoder has loaded project but does not Encode

I'm working on a large project (60minutes long). I'm ready to export. The project takes about half hour to load into AME but it doesnt go any further. It says Encoding on the status but the que time is yet to start. An hour later stil no change.
I tryed multiple formats and resolutions no change.
Why is this and how do i resolve the issue?
Windows 7 Beta 32bit build 7100
PPro cs4 v4.1.0
2.8 ghz quad core
4gb ram
ati radeon 3600 256mb
Many many thanks.

Update. I left AME to encode overnight and it actually started to encode. It got to 1:51seconds of encoding and then went no further. Any help with this people, the deadline is Friday and im lost for ideas
Cheers

Similar Messages

My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

How do I see a book which has been downloaded, but does not show in Adobe Reader XI?

How do a find a ePub book in Adobe Reader XI, which has been downloaded and does not show up? janf76607913

Visit:
Adobe Digital Editions
Be well...

Movieclips loader loads png but does not display image in ie

hello, i have created a static class to deal with the loading
of images, it works great. yesterday, i found an issue: i try to
load png files (those pngs are generated with quasimondo's bitmap
exporter), they do load, but they are not displayed in ie.
it worked until recently. is there some specification about
the png that i have to make sure that the png has? or is there an
issue using the movieclip loader with ie?
i included the actionscript class (save the code in an .as
file), so if you want to test, write only this in the first frame
of your code:
import com.iCongo.utils.MovieClips;
this.createEmptyMovieClip ("placeholder",
this.getNextHighestDepth ());
MovieClips.loadIMG (this.placeholder, "
http://somedomain.com/somepng.png");
that image will load, but in the context of my flash file
where many many files are loaded at the same time, only the block
generated by the bitmap exporter will not show.

OOPS
cancel that question. i ftp'd the file to the server again, this time setting the transfer type to binary and the png image comes up
just like it should.
john

Windows media player extension is installed but does not pass the plugin test...what do I do now?

I followed the instructions to install the Microsoft Media Player Extension in order to be able to listen to the radio in the Youtube Toolbar. I checked to make sure it was installed as per the instructions, then I tried the test that is provided in this link: http://plugindoc.mozdev.org/testpages/wmp11.html, but the screen was just black, and the radio still doesn't work...what should I do now?

OK...but I still can't get the radio to work...I get an error message that says:
"None of the Radio Player's stations or podcasts work.
If none of the stations or podcasts work, then check whether your computer meets all the requirements below:
- Operating system: Microsoft Windows 2000/XP/Vista or Mac OS.
- Windows requirements:
- JavaScript is enabled in your browser .
- Cookies are enabled in your browser .
- Windows Media Player version 9 or higher is installed
- If you have an older Firefox toolbar version, you may need to install Media Player ActiveX .
If you have met all the requirements above and the Radio Player still doesn’t work, please contact our Support Center . ''
I've done all of the above, all requirements are met, and it STILL doesn't work!! Now what please?
Last thing says "please contact our Support Center"...isn't this the support center...if not, please let me know who I should write to?
thanks,
Monica

Quiz works fine when I preview the Project, but does not send email when published. Help??

Everyday it seems to be some new problem with this Program and I am getting very frustrated. I have created a quiz and set it up so that when you get the results you click on the "Send E-mail" button. In the preview project mode this opens an email with the results and all you have to do is send it. Perfect right? I have since published this, and now when you pass the quiz and click on "Send E-mail" all I see is a yellow triangle with "Error on Page" in the lower left of my screen. Can you help me figure this out and give me some suggestions on how to fix this? I really need some way to be notified when the person has successfully completed the quiz. Thanks!

Hi there
Please take a look at the link below.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

TS1363 my iphone 4s is stuck where it shows the apple logo with loading bar but does not d o anything itunes shows waiting for iphone, how do i fix this

ok i have an iphone 4s ios6 on windows7 and every time i try to restore in itunes my iphone gets stuck showing apple logo and loading bar i have had it pluged in for over 3 hours i have tried i recovery ,ireb,tinyumbrella none seem to help ,any ideas if thers a solution for this

i have the same exact problem and im so frustrated. if you find a soulution can you let me know? i've been looking for ages and even tried a different computer

Photosmart 7520 e-ALL-IN-ONE appears to send email from scan successfully but does not

The scanner scans and appears to send the email successfully, actually confirms the email has been sent but does not arrive
This question was solved.
View Solution.

Hi Anne,
Thank you for the update. It’s great that we solved one issue, now onto the next ...
Please Try the HP Print and Scan Doctor for Windows. The Print and Scan Doctor diagnoses and helps resolve common printing, scanning, and connectivity problems. It should resolve the problem, or at least point you in the right direction to solve the issue of the missing text. If it doesn’t, please try following the steps in Troubleshooting Print Quality Issues.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Movie 115 minutes long but does not fit in idvd project?

movie 115 minutes long but does not fit in idvd project?

Hi
There are more to this
• Choise of encoding method
• Choise ot theme/menu
• What material that was used
• Choise of encoding method
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
Professional Quality (movies + menus up to 120 min.) - BEST
Best Performances (movies + menus less than 60 min.) - High quality on final DVD
High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
• Choise ot theme/menu
Some menus can take 15 minutes or more - No Audio, No Animation and a very simple one as "Brushed Metal" - will take very little time
• What material that was used
Some video codecs need to be re-encoded first then encoded in iDVD - this can be problematic for iDVD and most often gives a poor result.
So what video/audio/photo material did You use and how did You edit it and got it into iDVD ?
Yours Bengt W

The Power Supply Fan is still working, but does not appear to respond to increased loads, and its speed cannot be increased using SMCFanControl. Any suggestions?

Hi all - My mac pro 1,1 has an enigmatic problem. It's quad-core, 3Ghz, running OS X 10.7.5. The problem began some months back, when running HD video conferences, HD streaming videos and some other graphics-moderate (I won't say intense) uses, such as slide shows in Just Looking. My machine has an ATY, RadeonX1900 card and 2 monitors - both Apple displays, one being 30 inch 2560x1600, the other being 24 inch 1920x1200.
When I start those types of graphics-moderate apps, after about 5 minutes, something would crash (the monitors making a noise as it did) and the displays would both go black. The power did not appear to be fully cut off from the monitors. I think that the underlying applications, however, did not crash. So, I could still hear and speak to people during video conferences, and I could hear the sound tracks of videos.
Attempts to restart the computer and get the monitors back did not immediately work to undo the problem, if done straight away. The only way to correct the problem (so as to have the monitors work) was to wait for a few minutes and then restart.
After a lot of puzzled looking at console logs (and I confess that I am not an expert), I ran into a blank.
But, because of the timing of the crashes (after ~5minutes use) and restarts (after some minutes wait), I reasoned that the problem might be temperature related.
Once on that path of thought, I found this article:
http://worldtv.com/blog/guides_tutorials/fixing_an_overheating_mac_pro_no_expens e_required.php
I installed both Temperature Monitor and SMCFanControl. And I experimented, and got interesting results:
Now to the puzzling bit: SMCFanControl shows that the speed of the Power Supply Fan doesn't vary much, even if I use SMCFanControl to ramp fan speeds right up. All of the other fans react to SMCFanControl, going up to and above 2500rpm when commanded. But the Power Supply Fan does not. Having watched it for a few days now, the Power Supply Fan, according to AFCFanControl, never varies outside of a range from about 600-640 rpm, regardless of what I do with AFCFanControl.
Also (and not surprisingly), whenever the graphics-moderate apps run, when I ramp all the fan speeds up using SMCFanControl, Temperature Monitor shows that the all of the temperatures within the machine plummet, except in the power supply locations. Power Supply Location 2 is the worst affected. Because the Power Supply Fan does not react as the other fans do, the "crashes" still occur.
I could post some screen shots of the read outs of SMCFanControl and Temperature Monitor, although I think I have covered the key points in this post.
It seems that the Power Supply Fan is still working, but does not respond to increased loads.
Instinctively, I'm worried that if that's right, it might be a hard problem to fix. Any suggestions? Help! I would really appreciate them!
Cheers
P

Thanks for your response Grant. I had already read about, and I think excluded, dust in graphics card/fan/assembly as a cause. The entire inside of the computer, including the graphics card/fan/assembly, is as clean as a whistle. It looks clean. I've cleaned the dust out every now and then (including a few days ago). Also, my undersanding (derived from the article, linked in my first post) is that I might expect to see high temperatures in the Northbridge and memory module B if the graphics card was overheating. According to Temperature Monitor, however, locations do not increase in temperature when I run the relevant apps. Finally, the graphics card/assembly does not feel too hot to touch.
It is strange that SMCFanControl lists the Power Supply Fan as being software controllable, if that fan is not. Still, your comments are consistent with my observations, as the fan simply does not respond to software control.
There are two upsides: First, I've something of a work-around. I've worked out what temperature must be achieved in Power Supply Location 2 for a crash to occur, and I can watch that location in Temperature Monitor, terminating the process before that treshold is reached. Of course, that's not ideal. Second, ramping all the other fans up does significantly delay the onset of the problem, and makes recovery time much quicker.
Is there any donwside to peridically ramping up the other fans when running the relevant apps? Given that it causes all of the other locations to cool significantly, could this lessesn the life expecancy of the mahcine? (I don't want to run the fans up all the time - that's like sitting next to a jet ready for take off!)
Also, a correction to my first post: Yesterday, with all the other fans running on full and running an HD streaming video, the Power Supply Fan did, eventually, slowly, come up to ~740rpm, which is much higher than the ~640rpm maximum I had previously seen, and this may have aided delaying the onset of the problem.
I'm not sure where this leaves me? The problem might now be able managed. Well, sort-of. But it's not eliminated.

I downloaded the new version of Mozilla and tried to install an add-on to allow me to set the home page for new tabs. The app says it has downloaded but does not open new tabs as my home page (google) - any suggestions what I can do?

I downloaded the new version of Mozilla and tried to install an add-on to allow me to set the home page for new tabs. The app says it has downloaded but does not open new tabs as my home page (google) - any suggestions what I can do?

I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!

Pavillian a6710t says "Entering Setup", but does not proceed to load

This is a Client's machine.
Pavillon a6710t at Logo Screen, says "Entering Setup.....", but does not proceed to load. Have performed all the usual Diagnostics on Boot HDD. It received a clean bill of health.
Performed all usual steps in diagnosing "Windows will not load".
Any assistance from here is greatly appreciated. Thanks in advance!
This question was solved.
View Solution.

well, you could... but might be kind of spendy for a PCthat is more than 3 years old. I'd think about purchasing a new one and I would remove the drive and see If I could read it as a second drive in the new PC - to try and get your files off of it. If you want to pursue repair, here is an HP repair site page that has a list of authorized service providers: http://www8.hp.com/us/en/store-finder/find.do?bs=SR4&type=authorized
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

I recently purchased a new mac computer and would like to sync the music off my iPhone to my new mac.However, my phone and my new mac have different apple Ids.The PC which my phone is synced and has the same apple ID but does not let me transfer the music

Hi I recently purchased a new mac computer and would like to sync the music off my iPhone to my new mac.However, my phone and my new mac have different apple Ids.The PC which my phone is synced and has the same apple ID but does not let me transfer the music. Home sharing is not working. How do I successfully transfer and sync the music off my ipone 4 to my mac book pro if they have different Apple IDs? Thanks!

What do you mean the PC won't let you transfer the music? Save your entire iTunes folder (this is assuming that you have all your music stored in your iTunes folder) to an external hard drive. Connect that hard drive to your Mac. Copy the iTunes folder to your computer. Hold down the option key while launching iTunes on your Mac. Select the library you just copied when it ask you to select which library you want to open.

I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

# Question
I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

Media Encoder has loaded project but does not Encode

Similar Messages

Maybe you are looking for