Media Encoder not encoding files? No 'error' message.
So I've never had a problem with the media encoder until about a few weeks ago when I tried to make a skiing video. I'm using version CS4 and when I go to encode the premiere pro file it never encodes. it says its encoding but it never does anything and after 20 mintues or so it'll just stop and then give me an error message. Not sure how to fix it, please help.
Here is a picture of what it looks like.
Thanks
Hi, and welcome to the forums.
See #D5 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).
If you're in doubt about what was actually backed-up on any particular backup, see #A2 there.
Similar Messages
-
Bearts Audio Control Pannel will not open. Get error message cannot find startup file
Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500ZHi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files, the error message is "could not be opened". The movie's file format isn't recognized. " Any help or are they corrupted?
Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files. -
After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
== This happened ==
Every time Firefox opened
== FF updated to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6. Will not open...Error message: could not complete your request because it is not a valid photoshop document.
The file was corrupted somewhere along the way (assuming it was still readable on the Macintosh).
The platforms don't matter, but you still need file transfer that doesn't corrupt files... -
Can't open Indesign file. Error message says I need to upgrade plug-ins?
I created a business card for my husband from my indesign 5.5 version. I haven't upgraded my version since creating the file and for some reason I can't open the file. I get the error message 'Cannot open "Business Card - Ryan.indd". Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign.'
When I look at the business card file with finder it says it was created with InDesign 5.5. When I view my InDesign application through my finder applications it says I have InDesign 5.5 so I'm not sure why this error message is saying to upgrade my version of InDesign.I wish I had a dollar for every person who claimed there was no way a file was saved in a later version only to find out it was.
If you post a link to it someone here will save it back for you. -
Wrong CAP file version error message
I'm trying to write a loader application that will send a CAP file into JavaCard, and then install it automatically.
I have developed my JavaCard Applet by using Eclipse3.1.0 and JCOP30.
After running my JavaCard Applet by Eclipse, I got its CAP file in folder [b\bin\FVSCardPkg\javacard\[/b]
But when I run my loader application with this CAP file, the error message will display:
EX: msg Wrong CAP file version, class class com.ibm.jc.JCException
Wrong CAP file version
at com.ibm.jc.CapFile.parseHeader(Unknown Source)
at com.ibm.jc.CapFile.readCapFile(Unknown Source)
at com.ibm.jc.CapFile.<init>(Unknown Source)
at LoaderPkg.loader.load(loader.java:35)
at LoaderPkg.loader.main(loader.java:20)
This is my loader application source code:
import java.io.*;
import com.ibm.jc.*;
import com.ibm.jc.terminal.*;
* Sample /**
* Sample loader. Demonstrates how to use the offcard API to download
* a cap-file on a JCOP41V22 Engineering sample card and listing of applets loaded will
* follow.
public class loader{
private final static String termName = "pcsc:4"; // Real card
// private final static String termName = "Remote"; // Simulator
protected static final byte[] JCOP_CARD_MANAGER_AID = { (byte) 0xa0, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00};
protected static final byte defaultInstallParam[] = { -55, 0 };
static String[] capFileName={"D:/MyCardPkg.cap"};
public static void main(String[] args){
try{
loader l = new loader();
l.load();
}catch(Exception e){
System.err.println("EX: msg " + e.getMessage() + ", class " + e.getClass());
e.printStackTrace(System.err);
System.exit(0);
//Likewise for simulation, be patient the port takes time to close.
//Use command line "netstate" to check the disapperance of the port before
// activating JCShell command to read the simulated card.
private loader(){}
private void load() throws Exception{
CapFile capFile = new CapFile(capFileName[0], null);
System.out.println("Package name: " + capFile.pkg);
byte[][] applets = capFile.aids;
if ((applets == null) || (applets.length == 0)){
throw new RuntimeException("no applets in cap file");
// Get connection to terminal, take note that jcop.exe is required to be activated
// in simulation mode.
System.out.println("Open terminal ...");
//Make sure that the simulator jcop.exe is activated before unmarking this satement
//Remember to delete the downloaded applet before running otherwise error is
//expected if the simulator finds the existence of the applet with the
//same pakage name ID and AID
//Issue /close command at "cm" prompt if the card is in use,, ie it should
//have "-" prompt. Be patient that the port takes time to close. Use command line
//"netstate" to check the disapperance of the port before running.
// pcsc:4=Card Terminal Or Remote=LocalHost Terminal
JCTerminal term = JCTerminal.getInstance(termName, null);
//For real JCOP41V22 card, please unmark this statement and delete the downloaded
//applet before running. Error expected if the card finds the existence of the applet
//with the same pakage name ID and AID
//Issue /close command at "cm" prompt if the card is in use,, ie it should
//have "-" prompt.
term.open();
// Add in this statement for real card which requires some response time
term.waitForCard(5000);
// Create a logging terminal spitting out the APDUs on standard out
TraceJCTerminal _term = new TraceJCTerminal();
_term.setLog(new PrintWriter(System.out));
_term.init(term);
term = _term;
// Get JavaCard representative, passing NULL resets card and returns ATR
System.out.println("Get card ...");
JCard card = new JCard(term, null, 2000);
// Get the off-card representative for the card manager and use it to
// select the on-card CardManager
System.out.println("Select card manager ...");
CardManager cardManager = new CardManager(card, CardManager.daid);
cardManager.select();
// For downloading something, we have to be authenticated to card manager.
// For this, the keys must be set. The keys to use should of course
// be configurable as well.
byte[] dfltKey = c2b("404142434445464748494a4b4c4d4e4f");
cardManager.setKey(new OPKey(255, 1, OPKey.DES_ECB, dfltKey));
cardManager.setKey(new OPKey(255, 2, OPKey.DES_ECB, dfltKey));
cardManager.setKey(new OPKey(255, 3, OPKey.DES_ECB, dfltKey));
cardManager.setKey(new OPKey(1, 1, OPKey.DES_ECB, c2b("707172737475767778797a7b7c7d7e7f")));
cardManager.setKey(new OPKey(1, 2, OPKey.DES_ECB, c2b("606162636465666768696a6b6c6d6e6f")));
cardManager.setKey(new OPKey(1, 3, OPKey.DES_ECB, c2b("505152535455565758595a5b5c5d5e5f")));
System.out.println("init Update ...");
cardManager.initializeUpdate(255,0);
System.out.println("Authenticate to card manager ...");
cardManager.externalAuthenticate(OPApplet.APDU_CLR);
// And load the cap-file, do not forget to call installForLoad
System.out.println("Loading cap-file ...");
byte[] cardManagerAid = cardManager.getAID();
cardManager.installForLoad(capFile.pkgId,0, capFile.pkgId.length, cardManagerAid, 0, cardManagerAid.length, null, 0, null, 0, 0, null, 0);
cardManager.load(capFile, null, CardManager.LOAD_ALL, null, cardManager.getMaxBlockLen());
byte[] capaid = capFile.aids[0];
System.out.println("Finished loading !");
// Install applet, we try to install the first applet given in the
// cap file, and try to instantiate it under the same AID as given for its
// representation in the cap file. No installation data is passed.
System.out.println("Installing applet ...");
cardManager.installForInstallAndMakeSelectable(capFile.pkgId, 0, capFile.pkgId.length, capaid,0, capaid.length, capaid, 0, capaid.length, 0, defaultInstallParam, 0, defaultInstallParam.length, null, 0);
System.out.println("Install succeeded!");
// synchronize state with on-card card manager
System.out.println("Update!");
cardManager.update();
// Print information regarding card manager, applets and packages on-card
JCInfo info = JCInfo.INFO;
System.out.println("\nCardManager AID : " + JCInfo.dataToString(cardManager.getAID()));
System.out.println("CardManager state : " + info.toString("card.status", (byte) cardManager.getState()) + "\n");
//Echountered error 6A 86 with this statement:Object[] app = cardManager.getApplets(CardManager.GET_APPLETS,
//CardManager.CVM_FORMAT_HEX, true);
//Solved the bug by playing the integers in arg0 and arg1.
Object[] app = cardManager.getApplets(1, true);
if (app == null) {
System.out.println("No applets installed on-card");
} else {
System.out.println("Applets:");
for (int i = 0; i < app.length; i++) {
System.out.println(info.toString("applet.status", (byte) ((OPApplet) app).getState()) + " " + JCInfo.dataToString(((OPApplet) app[i]).getAID()));
// List packages on card
// Encountered error with this statement:Object[] lf = cardManager.getLoadFiles(CardManager.CVM_FORMAT_HEX, true);
// Solved the bug by setting arg0 = 0,
Object[] lf = cardManager.getLoadFiles(true);
if (lf == null) {
System.out.println("No packages installed on-card");
} else {
System.out.println("Packages:");
for (int i = 0; i < lf.length; i++) {
System.out.println(info.toString("loadfile.status", (byte)((LoadFile) lf[i]).getState()) + " " + JCInfo.dataToString(((LoadFile) lf[i]).getAID()));
term.close();
static String numbers = "0123456789abcdef";
private byte[] c2b(String s) {
if (s == null) return null;
if (s.length() % 2 != 0) throw new RuntimeException("invalid length");
byte[] result = new byte[s.length() / 2];
for (int i = 0; i < s.length(); i += 2) {
int i1 = numbers.indexOf(s.charAt(i));
if (i1 == -1) throw new RuntimeException("invalid number");
int i2 = numbers.indexOf(s.charAt(i + 1));
if (i2 == -1) throw new RuntimeException("invalid number");
result[i / 2] = (byte) ((i1 << 4) | i2);
return result;
How to solve this problem?
Thank you in advance.I'm not understanding if your cap file is in "b\bin\FVSCardPkg\javacard\", then why are you loading "D:/MyCardPkg.cap"?
The issue isn't with your off card application, but the cap file version. Look at the cap file components in JCVM specification. I believe it's the Header component. The major, minor should match your card but not greater. In other words, your can't load a 2.2 on a 2.1 card, but a 2.1 can load on a 2.2 -
My movies are giving a URL not found on server error message, last week they worked fine. After deleting one of them, I don't get any retries for a free download. How do I contact the seller to complain? Obviously the one of the other movies first..
Stan -
Thanks again for the simple but valuable tip.
I'm just going to repeat the relevant sections from my previous post with the screenshots this time:
Below you'll see a snip of how my current folder structure appears. It's identical to yours, except there are no button files in the General Folder. Since you were kind enough to include a file name, I did a search on that specific one and it's nowhere to be found on my hard drive. Hmmm....
I've seen others remark on how... "challenging".... Adobe's instructions can be sometime. I'll admit to having the same feeling when I was trying to download and install all the content files and the 7-zip stuff. Is the answer somehow that I screwed up that? Note the 7-zip folder right above the Adobe folder. Here's a screen shot of that expanded folder contents:
Does that look like you think it should? Have I not installed or extracted something correctly?
Finally, the only other thing I can think of to give you as much info as you might need is to include a screenshot of where the "Functional Content" stuff got saved. Adobe's instructions about this (if I recall correctly) were that it did NOT have to be installed anywhere specific, but you then had to go into Encore (& Premiere) and through preferences point to this stuff, which I believe I did. But I don't see any button type files in these anyway.
Other thoughts or advice?
Thanks! -
Ca'nt ftp longer (i.e. 4 minutes) flv or f4v files (get error message "waiting for server") I
when I ftp(i.e. "put" or "upload) short flv or f4v files using dreamweaver cs4 the files upload easily and quickly. However, when I try to ftp ("put" or "upload" ) longer (i.e. 4 minutes or longer) flv or f4v files it goes through the ftp process (seeing it in background activity screen) but at the end I always get a message "waiting on server" and the longer files don't get onto hosting server. Is there a setting I need to change or other method I need to use). I have worked with my hosting support tech person but we could not solve this problem.
I'd suggest that you try using a dedicated FTP program like Filezilla or SmartFTP.
http://filezilla-project.org/
Those programs give you much more feedback on what's happening as you attempt to upload files, including error messages, etc.
There is really no difference between uploading large files and small files, the process on the server is exactly the same..UNLESS there are limits to file size or video duration set by your host. So dispite the fact that you have worked with your host support, I'd still say that the problem is server side or being limited by your Internet service provider... unless the video files you are attempting to upload are corrupted.
You didn't say if any portion of the larger video files were uploaded...and FTP program will show you whether or not ANY of the file was uploaded and at what point it stopped. You also didn't mention how large the video files where.... sort of where the "tipping point" is in file size (video duration of course is no measure of file size).
Just to reassure you, the file size of a video file will have no bearing on your ability to FTP unless your host or ISP is limiting you in some way.
I regularly Live stream events and also record them. An 8 hr event will produce roughly 1.5GB of compressed video. I use SmartFTP, with a reputable host and can upload the entire set of 1.5GB of video files (each about 50MB) over a 1000kbps upload connection without problem. Recently during a movie production project, we uploaded a number of single video file which each where over 1GB a piece.
So there is really no problem uploading video files unless there are restriction on you account from the host or the ISP.
Best wishes,
Adninjastrator -
Safaru will not open crashes with error message
I have Yosemite and my Safari will not open, giving me error message..Help..Thanks, Jo
There is no need to download anything to solve this problem.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked. -
"Failed to load excel file" an Error Message while running TDS upgrade util
Dear All,
"Failed to load excel file" an Error Message while running TDS upgrade utility when clicking on CHECK DATA.
Please help me out on this!!!!!!!!!!!!
Thanks..........Not all data can be exported to Excel easily. Especially if the query result is huge or there are special characters in the query results. You may try the most updated version.
Thanks,
Gordon -
In iCloud setup my apple I'd is not accepting. Getting error message it should be an email I'd, but my my apple Id is just in user I'd form? Please support.
I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish -
My iPad receives email on the hotel wifi but will not send. The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged. Restarting iPad did not help.
I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message. I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message. Is there some trick to this? Very frustrating!
-
I am working in text edit and cannot open my file. Error message says it is in the wrong format, truncated or corrupted. what to do?
Try opening Disk Utility in your Applications-Utilities folder and repair permissions.
-
After iTunes requested that I download latest version on PC it now will not open. 2 error messages appear. first: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. second: iTunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 126). I have tried reinstalling a number of times and restarting computer but no luck.
This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation. -
My hard drive crashed on my Mac Book Pro and I just had it replaced yesterday. After restoring my data, Safari will not open. The error message I continue to receive is "Safari quit unexpectedly" Should I just delete the application and download a new one?
http://swcdn.apple.com/content/downloads/37/23/041-5058/lr5tynbldi18zcrqo8a8uq88 rnjushqliu/Safari6Lion.pkg
Here you go.....
Maybe you are looking for
-
I've read some posts and didn't find a similar question... I'm new to this forum and to Java also, so most of this acronyms (JSP,UIX,BC4J,EJB, etc.) can do nothing more than confuse me, but that's not my concern 'cause I know I'll grasp 'em little by
-
How to place the print and zoom link on top of the page in discoverer10g
I created a table format report and I want to place a Print and zoom link on the top of the page also I want to display the sum of a column in the top of the page, How to go for it. Message was edited by: user575682
-
HELP! Question on Apple ID and privacy
Hello. I have an apple ID but currentlyl, all my text messages are viewable on my ipad (which is a family one and uses my apple ID). I want to use iMessage but not have them viewable on other devices. I created a separate Apple ID but will that de
-
Removing file extension using REGEX
// User didn't add the XLS extension; add it automatically if (file.getName ().lastIndexOf (".") > 0) fileName = file.getName ().toLowerCase ().replaceAll (".*$", ".xls"); System
-
Hi all, I'm working with dashboards, and I need to identify every page on the dashboard, in order to show a comment from a table, depending on the page the user is at. For example, if the user is in page #1, the query of a table will show all the dat