Media encoder not recognizing second sequence

I have to sequences a full 2 hr edited project, I then created second sequences and copied first sequence over and edited to a 18 m inute compressed vid. I have my 18 minute sequence open and hilighted open my media encoder and my 2hr propject shows up. Have no idea what is going on can't seem to find fix any help
Video gal

teeman52 wrote:
I have my 18 minute sequence open and hilighted open my media encoder and my 2hr propject shows up.
Did you export it to media encoder with file>export>media ?
You could also export it straight from premier pro if it's giving you trouble instead of queuing it in media encoder...
or you hit this
and it's the two hour long sequence that shows up?

Similar Messages

Live media encoder not recognizing my camera

I am working on a MacBook Pro with a Sony PMW-EX3 HD camera connected through iLink with a Firewire 800. My iMovie recognizes the camera, so I know it is not the computer. However, in Live Media Encoder 3,1, I am not allowed to choose my Sony camera for input. It is like Live Media Encoder does not recognize the camera.
Any ideas?

I'm sure you checked this but just in case...
Is the camera on or in the mode to output to firewire when you have it connected to FMLE? I also have experienced devices not showing up when connected when the device is not on or sending out a picture. They also don't show up usually when you connect it or turn it on when FMLE is already running (which can be fixed by closing it and restarting the program).

Adobe Media Encoder not recognizing audio

I have MXF file I need to encode on a daily basis, but AME shows there is not audio in the files. QuickTime plays (and exports) the files great with audio (showing the audio as 16-bit integer big endian) Anyway I can force AME to recognize the audio?

This is at a Television Station. Shows and Promos are digitally delived to the station in a multitude of formats to our "Master Control". They have a server that recieves the files and flips them (via Flipfactory Telestream) into a format our main HD playout server uses to playout to air. The output setting for this process can not be changed (might change in the future?).
I need the promos that these companies send. So I have to grab the flipped files from our "Master Control". The raw files that were sent are not a playable (for me) format. I can "flip" them manually using Quicktime, but I would like to be able to set up watch folders that AME can use to grab the various promos and flip them as they are recieved.
Hope this all makes sense...

Media GO not recognizing Xperia S

Since the last update (6.2.B.1.96), Media Go stopped recognizing my Xperia S, and it makes PC Companion to hang. So, I cannot make backups, nor syncs nor modify the media inside my phone. I can do nothing. It's not the first time I face this problem. I used to have this kind of issues with my Sony Ericsson W508 also. Is there any known issue?

Good morning,
This morning, Media Go asked to be updated to 2.5a that I do. When reading the post of Eliote87 I have tried to wait to see If the phone is connected later.
I close Media Go. I unlock my Xperia S. I connect my Xperia S to my computer. PC Companion recognize the phone. Windows asked what to do and I answered "Transfer files with Media Go". Media Go opened without connecting the phone.
2 minutes later, the Xperia S is finally connected to Media Go.
I disconnect my phone from the computer and I let Media Go open. I unlock my phone. I connect my phone to my computer. PC Companion recognize the Xperia S after 10 seconds. Windows does not ask me what to do with the connected device (Media Go still running). Media Go does not recognize my Xperia S.
2 minutes 30 seconds later, the Xperia S is finally connected to Media Go.
I disconnect my phone from the computer and I let Media Go open. I open Windows Media Player. I unlock my phone. I connect my phone to my computer. Media Go does not recognize my Xperia S.
7 seconds after connection, both Windows Media Player and PC Companion have connected my Xperia S.
2 minutes 30 seconds after connection, the Xperia S is finally connected to Media Go.
This means that our problem is solved or must be read as "Media GO not recognizing Xperia S below a fair time of connection around 20 seconds".
In addition, why Windows 7 does not ask me what to do with my device when Media GO is running ? Is it due to Media GO ?
Xebeauxa

Media encoder not showing in cloud apps

media encoder not showing in cloud apps - I receive an error opening it and I want to reinstall but it is not in the download list

Hello, Adobe?

Media Encoder crashes on batch sequence export

I edited an online video dictionary (about 7,500 five second clips) and have them all in sequences in Premiere pro CC waiting to be exported. I hae been battling for two weeks now day in and day out to try and export... I am limited to batch exporting this project and have never had problems with adobe softwares in five years ( a great track record). I have tried many ways of importing or exporting the sequences to Media Encoder CC, and have experienced crashes every single export attempt. As soon as I add more than 5-10 clips the program crashes when I start the que. I have tried 5 different computers, and still have not been able to solve this problem. I badly need to deliver this product, does anyone have a patch that will keep ME from crashing when you add more than a couple clips?

Hi rdobbins,
Please mention the operating system, the version of Premiere Pro CC and Media Encoder CC and he type of the files used in the project. Is there any third party plug-ins used in the project. If possible, please mention the crash logs as well.
Regards,
Vinay

Media encoder not working

I have two ProRes timelines about 90 minutes each in length and when I try to export using "match Sequence Setting" or if I try to export to a DVD format, in ME they fail immediately with this code:
- Encoding Time: 00:00:00
12/06/2014 11:54:01 AM : Encoding Failed
A low-level exception occurred in: QuickTime (Exporter)
Export Error
Error compiling movie.
Unknown error.
I can export them directly from Premier with no issue to ProRes and to the DVD MPEG2 format. I cleaned the media Cache, so I'm not sure what I should do next. Also reinstalled Premier and Media Encoder.
Thanks...Jim Watt
Mac Pro 2 x 2.93 GHz 6-Core Intel Xeon
Mid 2009
Memory 40GB 1333 MHz DDR3
OSX 10.8.5
Graphics NVIDIA Quadro 4000 2048 MB
Video Card: Kona III
2 TB 7200 RPM system drive
Video Drives,
3 internal 2 TB 7200 RPMs
Apple 2.5 TB Xserve Raid
4 TB G-Raid
Premier Pro 2014 version 8.1 "Caravan"
CUDA Driver Version: 6.5.18

Thanks, I should have dug a little deeper before posting here.
For anyone else who might have this problem here is the exact steps I took to resolve this.
1.Close all Adobe applications.
2.In Windows Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS4. (If you installed Premiere Pro CS4 in a location other than the default of C:\Program Files\Adobe, then navigate to your custom installation location.)
3.Right-click on Adobe Premiere Pro.exe (which might appear without the .exe extension) and choose Create Shortcut.
4.Rename the newly created shortcut to just Premiere.
Important: The name of the shortcut must be exactly Premiere with no other characters.
5.Open a second Windows Explorer window, and navigate to C:\Program Files\Common Files\Adobe\dynamiclink.
6.Move the Premiere shortcut that you created into the dynamiclink folder.
Thanks again. Hope this helps others as well.

CS4 MEDIA ENCODER (not responding) please help...

I'm working with a PC VISTA home premiere 4gb ram, Nvidia gt 220 GPU, dual core, and CS4 MASTER SUITE.
Used PREMIERE PRO CS4 to capture NTSC dv widescreen footage (from DVX100B)
Used CS4 AFTER EFFECTS for GRAIN & TITLE GRAPHICS and rendered each clip as a QUICKTIME (newest version) .MOV animated file.
SAVED RENDERED CLIPS TO a 1TB external hard drive...connected to pc via usb...not esata yet...
IMPORTED RENDERED .MOV files into PREMIERE PRO and EDITED together a nice SEQUENCE just over 3min in length.
EXPORTED TO MEDIA (used serval different export settings with the same result) SEQUENCE FILE PULLS UP IN ENCODER and I click START QUE
and it trys to load then (not responding) freezing MEDIA ENCODER where I have to reboot...due the task manager wont shut it down.
Everything I have tried (Current Updates Installed, Video Card drivers updated, Re installed Premiere Pro, quicktime update, ENCODER update) is not working.
1) Are my .MOV files to large? ( what is a good size for a .mov) they range from 60-500MB
2)I read some forums about debugging and corrupt .dll files (please advise if the makes sense)
3) How do I run a clean script...will that help?
4) I HAVE A BUNCH of audio files .wav and aaf files...in the squence are they loading it down?
and thank you...hope I described the problem well enough.

Alirght my ENCODER IS NOT WORKING...a week later...I have compressed my HUGE 50-650mb clips to tiny FLV files...MY CS4 ENCODER cant encode more than 2 clips on the CS4 PPR sEquence...just says status: waiting then I hit >start queue and it freezes >not responding
every once and a while it will unfreeze (2% of the time actually) and encoding a file...
TROUBLE SHOOTING HELP
I dont have a previous copy of cs3 installed (never installed on this pc)
I have rebuilt my project in a small compress FLV and AVI formats.
I have unistalled and reinstalled twice.
I have cleared my media encoder 4.0 from my app data roaming file
I have tried the Premiere.exe short cut fix in C: dynamiclinkmanager file
Im stuck somebody out there has to had this problem...
Im running a 32bit Vista Dual core 500gb hardrive, 200mhz processor, nvidia geforcegt220 video card, 550w power adobe CS4 MASTER SUITE COLLECTION...CLEAN COMPUTER NEVER ONLINE ALOCATED just for editing purposes...
WTF ADOBE!!!

Media Encoder not finding "audio capture device"

Hi,
Im using Adobe Flash Media Encoder with Dxtory for Twitch streaming, and at first it worked fine. Recorded both my mic and game audio perfectly. Then seemingly suddenly, I fired it up and it wouldn't stream the game audio. It would my Mic, but thats it. I then unplugged the mic and it started saying I had no Audio Capture Device. I checked in Dxtory and its set up the same as it was when it was working. It picks up both the mic and speakers like it should. I have uninstalled this program multiple times, both 3.1 and 3.2 versions, and each time when I re-download it, it loads up the same profile I had before. So when I am uninstalling it, its not uninstalling everything for some reason. Even though the program is no where to be found after its uninstalled. I have downloaded xsplit, and it picks up the game audio and my mic. So its just this program. Anyone have any ideas? I cant seem to find anything online about this issue.
Thanks!

From where? PP sequence? PP bin? PP Source Monitor? Watch folder?

Matrox Media Encoder not working in CS4

Good day,
I have just purchased a used RTX2/ CS4 bundle which includes the card and breakout box.
I am currently using RTX2/CS3 which I bought way back in 2008 and is still working on my PC with Windows XP Professional (32bit) running Service Pack 3.
The existing PC was built according to Matrox System requirements:
Intel(R) Core™2 Quad CPU@240GHz with 4GB RAM etc
So all the hardware on the machine is working with RTX2/CS3 without any problems.
I have installed CS4/RTX2 on the same machine and everything shows that it has installed correctly.
In device manager the card and drivers can be seen.
When opening Premiere CS4 the Matrox logo dispays and all the effects and presets can be accessed. The tune does not play when the logo is displayed.
The only problem is that when trying to export a sequence the Matrox Media Encoder option is not available.
When selecting File > Export > the only options available are:
Media
Adobe Clip Notes
Export to EDL
Export to OMF
There seems to be a missing link to activate the Matrox Media Encoder option.
Please help as I paid a lot of money for this hardware/software bundle which does not work.
Regards,
Johan
My RTX2/CS3 software is registered with Adobe as well as Matrox and I will do the same with RTX2/CS4 as soon as I can get them to work.

http://forums.adobe.com/community/premiere/premierepro_previous for CS4 Questions, in case anyone is still using that old combination

Can Media Encoder take an image sequence in the watch folder and turn it into a video file?

I'm using OSX and Media Encoder 6 (from premier 6) and can't figure out how to make the watch folder take a .jpeg or .dpi sequence and turn it into a single video file.
I tried copying all the stills into the watch folder, that made 60 individual video files (one for each image).
I tried making a folder inside the watch folder, and copying all the images into it.. to which Media Encoder did nothing.
What am I missing? Will Media Encoder take image sequences and render them out as a audio-less video for me?
Thanks for any imput.

Hi action_packed,
This is from the documentation: http://helpx.adobe.com/media-encoder/using/add-items-encoding-queue.html
Still Image Sequences are not supported as source footage through Watch Folders. If a set of still images is placed in the folder being watched, each individual still file will be added as a separate item to the Queue rather than than the entire sequence as a single piece of footage.
Make a feature request for that here: http://adobe.ly/feature_request
Thanks,
Kevin

Media Encoder Not Encoding Whole Project

Hi all,
Pulling my hair out here and have deadlines to (maybe) reach.
I am using the trial version of CS6 Premiere Pro, Media Encoder etc through Creative Cloud on a Windows 64bit based machine.
Problem is I am trying to export a sequence (DSLR, 25fps) that is about 1hour 5minutes long (video and audio).
My settings are Mpeg2 DVD Custom, Quality 5, 2 pass VBR min 3, average5, max 7, maximum depth render, tick all the other boxes to make it the best quality etc.
Send it out to media encoder to let it do its thing. wait the hours then end up with a Mpeg2 file that has the full time frame of audio but only 45 minutes of video footage.
I have not rendered the timeline so there are some red and yellow lines but that shouldn't matter?
I have also done this with a video only sequence that came out 20 minutes short too.
Any ideas for a desperate man?
Thanks heaps in advance,
Phil

Hi Phil,
Is content missing at the end of the movie, or is everything there but the duration's wrong?
What app(s) are you using to check the duration of the encoded video?
Try setting in/out points either in PPRO to shorten the sequence to just a minute or so, set Source Range to Sequence In/Out Range, and encode that segment using your custom settings. Is the video still shorter than the audio? If so, then you can use the short segment for the following tests.
What is the multiplexer setting? DVD or None? If None, please try with it set to DVD.
Please try encoding using one of the system presets. If the resulting video is the correct duration, then I have one suggestion and one request:
Suggestion: starting from the system preset, change one setting at a time to match your custom settings, then encode to see if the video duration is wrong. I'd start with Max Depth, then Max Render Quality and Frame Blending of those are enabled in your custom settings.
Request: please post a copy of your custom preset for us to download. If you don't have any place to post it, then you can email it to me at mapes [at] adobe (dot) com.

Adobe media encoder not available in Photoshop CC - attempting to render animation.

I just downloaded CC about a week ago. I'm running it on a 32 bit Windows 8 PC. I've been trying to export video but the adobe media encoder is gray and unavailable. I can't find any support on this issue. I purchased the photography plan as all I needed was Photoshop. Anyone know what to do? When I try downloading the media encoder from the adobe website, nothing happens.

Unfortunately, video features are not supported for photoshoop cc and cc 2014 on windows 32 bit operating systems.
more info:
https://forums.adobe.com/thread/1320417

AppV - Adobe Media Encoder not in default location?

I'm virtualizing Adobe Captivate 5, which includes Adobe Media Encoder. During virtualization, when I launch AME, I get a message:
Adobe Media Encoder is not being run from the default installation location. This is not a supported configuration."
I never changed the installation location for Captivate... it's going to wherever Adobe has it set to go.
After I hit OK (that's my only choice, no "Don't show me this message again") the app seems to be OK... so if there's a way to change a registry key or something and just get rid of that message, that would probably be fine.

Unfortunately, video features are not supported for photoshoop cc and cc 2014 on windows 32 bit operating systems.
more info:
https://forums.adobe.com/thread/1320417

Media Encoder not starting from Premiere Pro

I'm having issues Exporting from Premiere Pro - I'd rather queue it through Media Encoder so I can move onto the next edit, but when I select Queue and Media Encoder opens, it doesn't do anything - simply sits there with "Not Currently Encoding" as opposed to importing the data to export.
Help?
Adobe Media Encoder, 6.0.2.81
Also installed other CC products Ps, Pr, Id, Lr, Ai, etc
I have run Adobe Updater but no updates available for Me.
Mac OS X 10.7.5 (Lion)
I am using Adobe Media Encoder through a Creative Cloud Membership subscription
Project is 6 minute film shot on Sony FS700 (AVCHD) and exports from Premiere Pro
No error message, just no action from the Application
Have not seen the problem before - most of my work is vi Canon 5D MK III, so maybe it's a Sony Codec issue? Though I have exported footage from this camera before though...
Apple MacBook Pro, 17",
I am using Mercury Playback Engine GPU Acceleration in Premiere Pro
Cheers

Finally got fed up and rang Adobe (if all else fails...)
Video Support Team Member opened my Library folder (Go\Go to folder...\~/Library/) then went into \Preferences\Adobe\Adobe Media Encoder\ and changed the folder called 6.0 to 6.0old (i.e. rename it to anything else), then hit Queue in Premiere Pro and the project successfully opened in Media Encoder and was able to start encoding.
Hopefully that helps someone else suffering the same issue!
Ollie

Media encoder not recognizing second sequence

Similar Messages

Maybe you are looking for