Media encoder stops encoding at the end of the video (Premiere CC 2014)

I've finished editing a video (just under 4 minutes). When I try to export it to a windows media file (HD 1080p) it always stops encoding at around the 50% mark.
I have tried exporting to a shared network drive as well as the local hard drive with the same results.
I have it set to: Mercury Playback Engine Software Only
I have tried to export directly from Premiere and from Media Encoder.
I looked at where it stops when exporting from Encoder through the preview window. It seems to reach the end of the video and stops right where I fade out to white and the music ends. The interesting part it that the timer shows 50% left to complete
It doesn't crash... it just sits there with the timer increasing and never continues
I'm not using any plugins.
At the point where it stops, I have a "Dip to White" transition on the one video clip and no audio transitions applied to the soundtrack since it ends nicely with the video.
Please let me know if there's anything else I can/should explain to get some help. Thank you so much for your help.
System details:
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: HP Z230 Tower Workstation
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (8 CPUs), ~3.6GHz
Memory: 16384MB RAM
Available OS Memory: 16070MB RAM
Card name: Intel(R) HD Graphics 4600
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Display Memory: 1696 MB
Dedicated Memory: 64 MB
Shared Memory: 1632 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)

Peferling... I have a positive update! I went to the area that typically made things die. I noticed it was at the tail end of where I inserted a sequence into another sequence. I also noticed I had three tracks in that section with graphics. So I copied all the tracks from the inserted sequence... then removed the inserted sequence and re-inserted the actual tracks. At this point I no longer had an inserted sequence. I then simplified the three tracks of graphics into one. Re-applied my transitions and did last tweaking. I once again tried exporting as H.264 HD... et voila! It worked! Something must have been breaking it.
For now I'm okay and have been able to export into other formats. I want to thank you so much for your input. Regards, Nelson

Similar Messages

I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning. How do I fix this?

I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning. How do I fix this?

adam@honestmusky wrote:
Yes I am using encore. I used to have no problem doing this, but I had to get a new computer and now something isn't working right.
How about some DETAILS?
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Also describe the EXACT steps you take to go from Premiere Pro to Encore

Using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part I get no indication on ipod of download

When using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part. I get no indication on the ipod of the book downloading. Is this a operating error or posable failure of the I pod.?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have an Iad2 and ever since ios6-there are issues.I get occasional lock-ups and have to reboot. The WSJ app freezes when running their videos to the end. The only work-around is to stop the video before it's over. Worse than windows me !!!!!

My Ipad2 worked perfectly before ios6 upgrade. It now freezes occasionally and I have to reboot to get it to work. Also the WSJ app will now freeze if I try and run one of their videos that is imbedded in the article. My only work-around is to stop (press done) before the end of the video or I have to do a total reboot. The problems remind me of Windows ME . Will Apple resolve these issues or become more like Microsoft. Hopefully there will be a restore button in the future like Microsoft was forced to do because a lot of upgrades are just terrible. Am I crazy or are there other people having the same issues with ios6, or could this just be a coincidence and my ipad2 is starting to fail just when ios6 arrives ?

I know this will not help but, the bluetooth headset I purchased for my wife works great and it pairs with our car and our sound bar in the livingroom (Motorola Droid Razr) 98.72.16.XT912.Verizon.en.US
However I did not upgrade over the air but from a android web site and placed it on my external sd card. I believe this made the difference in why we had no issues and upgraded functionality has been great.
Please note when I mention these bluetooth devices I mean the Razr connects with no problems.
It also had no internet issues and none of the problems others have complained about in other threads.
unfortunately when you say thousands have these issues I cannot say that is accurate. The hope is when large numbers of owners have updated to the Jelly Bean and are complaining inmase then Motorola will issue a patch to verizon to get out to the affected users.
Of course now that Google owns Motorola Mobility and has laid off loads of workers it may never issue an os patch.

Hello Simple problem - don,t know how to solve it. With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was de

Hello
Simple problem - don,t know how to solve it.
With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was defective and went to get a new Magic Mouse after lots of frustration. Today, I have an edit to do it it does the SAME thing !!
I was like ????#$%?&*(???
Opened all the lights and taught I've trow the new mouse to the garbage and was using the defective mouse again... no !! - ??
Actually, the bran new mouse is doing the same thing. What I understand after investigating on the motion and watching carefully my fingers !! - is that when I click I have to keep my finger at the EXACT same place on the mouse... drag and release and it's fine. If I click by pushing on the mouse and my finder is moving of a 1/32th of a millimeter, it will release and my selection will be to redo. You can understand my frustration ! - 75$ later... same problem, but I know that if I click with about 5 pounds of pressure and trying to pass my finger through the plastic of the mouse, it you stay steady and make it !
The problem is that scrolling is enable while clicking and it bugs.
How to disable it ??
Simple question - can't find the answer !

Helllooo !?
sorry but the Magic Mouse is just useless with the new Adobe Premiere CC and since I'm not the only one but can't find answer this is really disappointing. This mouse is just fantastic and now I have to swap from a USB mouse to the Magic Mouse every times I do some editing. My USB mouse if hurting my hand somehow and I want to got back to the Magic Mouse asap. Please - for sure there is a simple solution !
Thanks !!

How do i start a motion tween by clicking a button and stop it at the end of the tween.

Hi guys,
I am creating a website for a project and i am trying to activate a box bropping down from another box when i click on the enter here button i have created. I have set the motion tween and its working when i preview i just unsure of the correct actionscript to start this tween when i have clicked the entere here button or how to stop it at the end of the tween.
I am scared i may have made the layers in the wrong place, they are all currently in scene 1. does my second box that is dropping down need to be set inside the layers of the first box?
Bit of a newbie at this.
Thanks in advance!

Create the dropping box movieclip as an animation by itself with a stop() coomand in the first frame and a stop() command in the last frame. The click of the button should tell the movieclip to play(); at which point the animation should play and stop at the end.
Another option would be to use an actionscript Tween to make the box drop. Going that route the animation is what you code it to be and there is no need to have to stop it as it will end where you tell the Tween to end at.

A movie I ment to download stopped near the end of the download I want to know what I can do

A movie I ment to download stopped towards the end of the download

Hi, jannaken.
Since the computer was restored to factory, your sync preferences have been reset. I would recommend verifying that Sync Music is selected under the device preference. Below, this article will walk you through the process.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Cheers,
Jason H.

TS1362 a few songs that I have purchased dont play the whole song one skips the whole first minute and 2 others stop before the end of the song. how do i fix this/

A few songs that I have purchased on Itunes have stopped working correctly. One skips the whole first minute and two others stop playing long before the end of the songs, how can I fix this without having to buy the song again?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

Playhead randomly JUMPS to the end of the timeline when "editing" during playback

CS 6.0.1
OSX 10.7.4
I love the new feature in CS6 that lets you edit DURING playback, and playback won't stop. Brilliant.
Now, I use this feature a lot making cuts as I go. I use the "command + shift + k" combo to make an edit to all tracks while the playhead is moving along. It seems though that every so often when I do this, the playhead warps to the end of the timeline. Very frustrating, and when dealing with long timelines,really slows me down, to get back to where I was working.
Also I can repeat this "glitch" very easily, so its not some totally random occurance. Just pushing cmd+shift+k while the playhead is moving a few times repeats it very quickly.
Am I doing something wrong here? Or toggling some OTHER key command inadvertently? Or is this a legit glitch?
EDIT: I would like to add that using the "nudge" command during playback has the same glitch of arbitrarily jumping to the end of the timeline if you click the nudge command quickly in succession.

This issue was NOT resolved by manually installing all cs6 updates that were failing with adobe product manager, then doing a clean installation of the latest drivers from Nvidia's website using the ODE (Optimal Drivers for Enterprise) Graphics Drivers.
The issue came back after editing for a little bit., however this following fix worked:
*FIXED BY ADOBE TECH SUPPORT INDIA*
The solution was to delete all media cache files and all cache settings for the specific project. Check all your cache locations and encoded media file locations.
Rebuild project on load.... edit. Thanks.

Error message at the end of the installation of Creative suite 5.5 Acrobat not installed

Hi,
I have an issue when installing the Adobe creative suite 5.5 in my windows 7 system. during the installation everything is fine but at the end of the installation I have the error message below. and Adobe Acrobat X is not installed. When I try to install only the A Acrobat package the serial of the creative suite doesn't work (only for Acrobat, but if use for the whole creative suite it works)
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 10 error(s), 6 warning(s)
WARNING: DW024: The payload: Adobe Photoshop CS5.1 Core {08EF22BC-43B2-4B4E-BA12-52B18F418F38} requires a UI parent with following specification:
    Family: Photoshop
    ProductName: Adobe Photoshop CS5.1 Core_x64
    This parent relationship is not satisfied, because this payload is not present in this session.
ERROR: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has required dependency on:
    Family: InDesign
    ProductName: Adobe InDesign CS5.5 Icon Handler x64
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has recommended dependency on:
    Family: Adobe Web Suite CS5.5
    ProductName: Adobe Media Encoder CS5.5 X64
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {D8CCCF4C-C227-427C-B4BE-736657D2AB7E} has recommended dependency on:
    Family: Adobe Web Suite CS5.5
    ProductName: Adobe Media Encoder CS5.5 X64
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
    Family: CoreTech
    ProductName: Adobe Player for Embedding x64 3.1
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
    Family: Shared Technology
    ProductName: Photoshop Camera Raw (64 bit)
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
    Family: CoreTech
    ProductName: AdobeCMaps x64 CS5
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
    Family: CoreTech
    ProductName: Adobe Linguistics CS5 x64
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
    Family: CoreTech
    ProductName: AdobePDFL x64 CS5
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
    Family: CoreTech
    ProductName: AdobeTypeSupport x64 CS5
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
    Family: CoreTech
    ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has recommended dependency on:
    Family: Adobe Web Suite CS5.5
    ProductName: Adobe Media Encoder CS5.5 X64
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this payload from the dependency list.
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
WARNING: DW065: Display requirements not met for {60E59A6C-7399-495A-B85C-C829F4E59602}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.
Thank you
Regards
Rida

Refer to this:
Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

Audio cutting out at the end of my video

So I exported a AVCHD video into an uncompressed AVI and then re imported it. I brought it into the time line and edited it a bunch and also brought in another video and mixed that in. For about half of the video, I used the audio from the video itself... but in different sections, I brought in a separate wav file. I used this wav file towards the end of the video for about 1 minute of the video. After I was done, I exported the entire project into a normal avi file because what I'm going to do for now is upload these to YouTube and so I don't want the file sizes to be too huge.
So I opened up the final avi file in VLC player... and everything is great... except the last 30 seconds or so of the video doesn't have the audio. It plays the audio from the wav about halfway through... and then it stops. The video continues... but there is no sound.
I went back into the project and everything looks fine. The wav file extends to the end and the audio plays fine when I preview the video. So I exported again just to see if it was some sort of error the first time... but no... it did the same thing.
So why is the audio cutting out at the end? How do I fix it?
Thanks in advance.

Ok I figured out how to do a better quality MP4. However I had two problems. 1... the quality isn't near as good as the AVI. 2... now the audio cuts out in even more places instead of just the end. It seems that the .wav file I imported is causing the problems. In the AVI, the wav file cuts out at the end. In the MP4, the wav file cuts out in the middle AND at the end. I don't understand why this is happening. The wav file plays all the way through normaly, and it also sounds find when I preview the video... but when I encode it... it cuts out in places regardless of the format. Is there some step I'm missing in the process to make sure the audio is all in place?

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

A SWF Tag of type 75 contains 10 bytes of unread data at the end of the tag at byte offset 1762

When building with Flash builder 4.7 I get two warnings I can't seem to track down.
Those are
"A SWF Tag of type 75 contains 10 bytes of unread data at the end of the tag at byte offset 1762" The other
"A SWF Tag of type 75 contains 5464 bytes of unread data at the end of the tag at byte offset 797163"
No file is pointed out or anything else to help.
Any ideas what to look for, why this is a warning, possible implications & what to do?

This is one output after running a variation of the script, but I get this    on all of the libraries
Here is a link to the swc for further inspection https://dl.dropbox.com/u/154782/GoCoUtil.swc
<?xml version="1.0" encoding="UTF-8"?>

<swf xmlns="http://macromedia/2003/swfx" version="14" framerate="24.0" size="10000x7500" compressed="true" >

<FileAttributes useDirectBlit="false" useGPU="false" hasMetadata="true" actionScript3="true" suppressCrossDomainCaching="false" swfRelativeUrls="false" useNetwork="true"/>
<Metadata>
        <![CDATA[<rdf:RDF xmlns:rdf='http://www.w3.org/1999/02/22-rdf-syntax-ns#'><rdf:Description rdf:about='' xmlns:dc='http://purl.org/dc/elements/1.1'><dc:format>application/x-shockwave-flash</dc:format><dc:title>Adobe Flex 4 Application</dc:title><dc:description>http://www.adobe.com/products/flex</dc:description><dc:publisher>unknown</dc:publisher><dc:creator>unknown</dc:creator><dc:l anguage>EN</dc:language><dc:date>Sep 20, 2012</dc:date></rdf:Description></rdf:RDF>
]]>
</Metadata>
<EnableDebugger2 password="NO-PASSWORD" reserved="0x1975"/>

<ScriptLimits scriptRecursionLimit="1000" scriptTimeLimit="60"/>
<SetBackgroundColor color="#FFFFFF"/>
<ProductInfo product="FLEX" edition="NONE" version="4.6" build="23201" compileDate="9/20/12 12:41 PM"/>
<DoABC name="com/gogogic/common/util/interfaces/IParsableList"/>
<DoABC name="_5655ee2c6f5749799717c751ad05c55879a42026a02d38e5e206aab452dbcc6f_flash_display_Spr ite"/>
<DoABC name="com/gogogic/common/util/ShallowCloner"/>
<DoABC name="com/gogogic/common/util/GoCoDataUtil"/>
<DoABC name="com/gogogic/common/util/PropertyParseError"/>
<DoABC name="com/gogogic/common/util/interfaces/IDataChange"/>
<DoABC name="com/gogogic/common/util/vo/DataChangeVO"/>
<DoABC name="com/gogogic/common/util/GoCoUtilVersion"/>
<DoABC name="com/gogogic/common/util/event/DataChangeEvent"/>
<DoABC name="com/gogogic/common/util/PropertyParser"/>
<SymbolClass>
    <Symbol idref="0" className="_5655ee2c6f5749799717c751ad05c55879a42026a02d38e5e206aab452dbcc6f_flash_displa y_Sprite" />
</SymbolClass>
<ShowFrame/>
</swf>

Xpath Debatching in Orchestration -The part 'part' of message 'Message_In_Copy' contained a null value at the end of the construct block

Hi ,
Facing strange issue in Xpath debatching in Orchestration.
Getting following error in construct shape:
The part 'part' of message 'Message_In_Copy' contained a null value at the end of the construct block
Code inside the construct block:
sXpath = System.String.Format("/*[local-name()='Customers' and namespace-uri()='http://Debatch.Customer']/*[local-name()='Customer' and namespace-uri()='http://Debatch.Customer' and position()={0}]", nLoopCount);
System.Diagnostics.Debug.WriteLine(sXpath);
Message_In_Copy= xpath(Message_In, sXpath);
Schema used:
<?xml version="1.0" encoding="utf-16"?>
<xs:schema xmlns="http://Debatch.Customer" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" targetNamespace="http://Debatch.Customer" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="Customers">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="unbounded" name="Customer">
<xs:complexType>
<xs:sequence>
<xs:element name="name" type="xs:string" />
<xs:element name="id" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
Can anyone help me out ? to identify the root cause for above issue.
Thanks,
Kind Regards,
girsh
girishkumar.a

I agree with Shankycheil here, querying XPath will return XMLNode and thus can't be assigned to XMLNode.
But for debatching in Orchestration using Xpath is not a very good idea.
Because using XPATH loads the complete message in memory(XML Structure) and then performs processing.
This approach is always prone to throwing Out of Memory exception and low in performance also.
Therefore I would suggest you to perform debatching by calling XML Disassembler(XMLReceive) pipeline.
As pipeline works with Stream it will have better performance and you will also get complete control over the messages.
Refer the below samples for debatching using XML Receive pipeline within Orchestration.
Comparrison between XPATH and ReceivePipeline for Debatching:-
De-batching within an orchestration using XPath or calling a pipeline
Debatching within Orchestration using Pipeline-
http://tech-findings.blogspot.in/2013/07/debatchingsplitting-xml-message-in.html
https://jeremyronk.wordpress.com/2011/10/03/how-to-debatch-into-an-orchestration-with-a-pipeline/
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

HT201272 can someone help me with this chat session.Font Size You are chatting with an Advisor now. This chat will be recorded. At the end of the session, you can print the transcript or request a copy via email. Privacy Policy Advisor [4:49 p.m.]: Hi, my

Font Size
You are chatting with an Advisor now. This chat will be recorded. At the end of the session, you can print the transcript or request a copy via email.
Privacy Policy
Advisor [4:49 p.m.]:
Hi, my name is Jacob. It'll be just a moment while I review the comments you provided.
Advisor [4:49 p.m.]:
Hello Machelle, how may I assist you today?
Customer [4:51 p.m.]:
Can you please help me recover the new testament of the bible from media group. The have vanished.
Customer [4:52 p.m.]:
I need to recover the lost purchases I made from media group. I had all of the new testament.
Advisor [4:53 p.m.]:
Thank you for this information, I understand that you are missing some purchases. I do want to apologize for this inconvenience. I will be more then happy to look into this for you.
Advisor [4:53 p.m.]:
Would you be able to provide your Apple ID? This is the email used to sign into the iTunes store.
Customer [4:54 p.m.]:
[email protected]
Advisor [4:54 p.m.]:
Thank you, one moment please.
Advisor [4:56 p.m.]:
Were these individual purchases? If so could you provide the name for each individual purchase?
Customer [4:57 p.m.]:
yes it the new testament books of the bible
Customer [4:57 p.m.]:
genesis etc...
Advisor [4:58 p.m.]:
I apologize, but I am not exactly familiar with the New Testament. Would you be able to provide these names for me so I can locate them on my end?
Customer [4:59 p.m.]:
Genisis Mark Matthew Luke John
Customer [4:59 p.m.]:
Exodus Levitus Numbers
Advisor [5:00 p.m.]:
Just a quick question, were these all audiobooks?
Customer [5:00 p.m.]:
Duetoronomy
Customer [5:00 p.m.]:
Yes from media group
Advisor [5:00 p.m.]:
Okay, are you currently on a computer with iTunes installed?
Customer [5:01 p.m.]:
yes
Advisor [5:02 p.m.]:
Unfortunately, audiobooks and ringtones are the only items on the iTunes store unavailable for re-download through iTunes in the Cloud. What I can go ahead and do is try and re-add these audiobooks back to your download queue for re-download. Please note if they have been removed or modified on the iTunes store they may not be available for re-download. Would this be okay?
Customer [5:03 p.m.]:
yes thank you!
Advisor [5:03 p.m.]:
Excellent, one moment please.
Advisor [5:05 p.m.]:
I apologize but after reviewing your account, it looks like we have already issued 3 exceptions for you to re-download your audiobooks in the past. Back on 02/23/2013. I apologize but we will be unable to do another exception for you.
Customer [5:06 p.m.]:
that down load did include the new books of the bible that I had.
Customer [5:07 p.m.]:
that down load did not have the new testament books of the bible that I had
Advisor [5:07 p.m.]:
While reviewing the notes, this was issued to add all available audiobooks bought on your account. I again apologize but I will be unable to issue another exception to you. As the previous advisor did inform you to make sure to back up your files.
Customer [5:08 p.m.]:
the other advisor did not down load the new testament books. The advisor did not restore all of the books that I had originally brought.
Advisor [5:10 p.m.]:
While looking closer, the books that you are missing are no longer available to be re-downloaded. This is the reason why they were not added back to your download queue when he issued them. Unfortunately, as we do not handle the content on the iTunes store you will need to get in contact with the publisher of the content as they were the ones two remove or modify these books on the iTunes store. If you would like I can provide a link to their support site.
Customer [5:11 p.m.]:
yes they are I saw them.
Advisor [5:11 p.m.]:
They may have been modified by the content owner. This will be the reason why they were not added. As Apple does not control 3rd party content on the iTunes store. You will need to get in contact with them as we are unable to re-add this content back to your download queue.
Customer [5:12 p.m.]:
it is I just looked at it in the itunes store
Customer [5:13 p.m.]:
the material is still the same. The store does have it.
Advisor [5:13 p.m.]:
Machelle, if the items have been modified since you bought them, they will be unavailable for us to issue them back to you. You will need to get in contact with the providers for these books as they are the content owners and we do not have access to issue these back to you.
Customer [5:14 p.m.]:
the are still the same bible books that I purchased at the store.
Customer [5:14 p.m.]:
The audio books are the same. When I buy it again nothing will be different.
Advisor [5:14 p.m.]:
Machelle, I understand this. This is what our records are showing. When the previous advisor tried to re-issue them to you they were unable to as they have been modified on the iTunes store.
Advisor [5:15 p.m.]:
In order to receive further support for this issue you will need to get in contact with Media Group as they are the content providers for these audiobooks.
Customer [5:15 p.m.]:
I will buy them from another source. Don't say they have changed. The books are the same books I brought. They are at the store.
Advisor [5:16 p.m.]:
Machelle, Apple does not handle the content for 3rd party publishers on the iTune

MoonSwan wrote:I've never heard of a validating editor but I was recently wondering what exists that could help me. Aside from emacs, what should I search for to find one of these validating editors?
You can use whatever tool you prefer - for someone already using emacs, emacs is a natural choice. Simple, easy to use online tools exist e.g. http://schneegans.de/sv/
Just upload the file in question ('Validate by file upload' option) and click 'Validate':
The '=' character cannot be included in a name. (723:10)
<Terminal="Terminal">
^
Googling 'xml validation' should give you some more tools / services if this one is not good enough.

Media encoder stops encoding at the end of the video (Premiere CC 2014)

Similar Messages

Maybe you are looking for