Media Encoder stops opening

I went to render out a video and media encoder opened, I set my file type to Microsoft DV, went to render and then seconds later my computer flashes to a blue screen saying that there was an error and it was dumping memory or something like that. I went ahead and shut down the computer and re-booted. Now when I try to open media encoder it says that media encoder has stopped working. What can I do to fix this? Why did my computer crash? I am rendering to a raid 0 setup, the same drive(s) that hold my media. My OS is on another drive. I am using intel core i7, P6T deluxe v2, 6 gigs ram, geforce 285.

If you need help quickly...Guideline for posting an effective question

Similar Messages

Media encoder stops opening up

adobe media encoder stops opening up last time i have forcely stopped the encoding queue from that point it stops opening up MY version is cs6 and os is windows 7

If you need help quickly...Guideline for posting an effective question

Media Encoder stopped working: Software is not even opening [CS6]

Hi!
I'm using the Student version of CS6 and for some reason Media Encoder stopped working.
Every time I open it up, e.g. by opening the Stand alone version or adding a project to the queue, the splash screen shows up but Windows (7) shows an error.
Windows is trying to fix the problem but can find a solution.
Surprisingly I have no problems on another user account.
I hope someone is able help me...
(And sorry for the bad English)

Please try holding Ctrl + Shift keys while you are launching AME CS6. This will clear the preferences info which may have been corrupted somehow.

Problem- Adobe Media Encoder Stopping Mid Queue

I was exporting my final movie, which was about 60 minutes. It was taking a long time to render when exporting to a quicktime file, which I expected, however, the Adobe Media Encoder stopped the rendering an hour later, only rendering half before shutting down. I am exporting it as a widescreen, NTCS DV Widescreen. Could have I screwed up the format and that is why it's failing to complete the exporting??? What can I do to solve this and have it complete the export. At the end of the report is says disk is full. But I know my hard drive could not be full.
- Source File: C:\DOCUME~1\Sully\LOCALS~1\Temp\Wilks shot put_4.prproj
- Output File: E:\Sequence 01.m2v
- Preset Used: NTSC 23.976p Widescreen High Quality
- Video: NTSC, 720x480, 23.976 [fps], Progressive, Quality 4.0
- Audio: 48 kHz, 16 bit, Stereo, PCM
- Bitrate: VBR, 1 Pass, Min 1.50, Target 4.00, Max 7.00 [Mbps]
- Encoding Time: 00:03:40
8/14/2009 7:13:45 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\DOCUME~1\Sully\LOCALS~1\Temp\Wilks shot put_5.prproj
- Output File: E:\Sequence 01.mov
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate: DV/DVCPRO - NTSC
- Encoding Time: 00:03:44
8/14/2009 7:26:22 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\DOCUME~1\Sully\LOCALS~1\Temp\Wilks shot put_9.prproj
- Output File: E:\Sequence 01.mov
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate: DV/DVCPRO - NTSC
- Encoding Time: 00:57:28
8/14/2009 8:28:28 PM : Encoding Failed
Error compiling movie.
Disk Full.
- Source File: C:\DOCUME~1\Sully\LOCALS~1\Temp\Wilks shot put_10.prproj
- Output File: E:\Sequence 01.mov
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate: DV/DVCPRO - NTSC
- Encoding Time: 00:59:32
8/17/2009 4:37:35 PM : Encoding Failed
Error compiling movie.
Disk Full.

FAT-32 is your problem. DO NOT FORMAT!!!!!
You want Convert. That is very, very different. Back in properties, look for the Volume Label of your drive. Copy down this label exactly like it appears. Capitalization is important. Get it right.
You will need to then use a CMD Prompt command to Convert.
To convert a volume to NTFS from the command prompt
Open the Command Prompt window.
In the command prompt window, typeconvert drive_letter: /fs:ntfs
For example, typing convert D: /fs:ntfs would format drive D: with the ntfs format.
Notes
To open a command prompt, click Start, point to All Programs, point to Accessories, and then click Command Prompt.
You can convert FAT or FAT32 volumes to NTFS with this command.
Again - DO NOT FORMAT!
Good luck,
Hunt

I have been using CS6 for two years without incident. Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help

I have been using CS6 for two years without incident. Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help?

Hi Mylenium,
Thanks for your response.
Here is the error information showing up:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Media Encoder.exe
Application Version: 6.0.0.382
Application Timestamp: 4f62fcf1
Fault Module Name: WatchFolder.dll
Fault Module Version: 6.0.0.382
Fault Module Timestamp: 4f62f37f
Exception Code: c0000005
Exception Offset: 0000000000007899
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105
Additional Information 1: 9a62
Additional Information 2: 9a620826d8ae4a2fa8b984b39290a503
Additional Information 3: 1fb3
Additional Information 4: 1fb304eee594288faeefbf1271b70d37
I am using a PC Windows 7

Adobe Media Encoder stopped working in this project, works in others

Adobe Media Encoder just stopped working in my current project (in PPRO CS3). I'd output several MPEG2-DVD and Windows Media Files. Then I went to make one more MPEG2-DVD file, and when I clicked OK in AME, nothing happened. It should open a window to select where I want to put the file, and a few more options. No crash, no freeze, no error messages..and no output.
None of the AME formats work (WMF, Quicktime, etc). But other exports do work. I made my MPEG2-DVD file using Export to Encore.
I opened another project I'm working on, and AME does work in that project.
Back to my current project, and it still doesn't work.
I've rebooted, and uninstalled-reinstalled PP CS3.
Anyone fixed this? Thanks!

After some more playing, I discovered that the other sequences in this project do still export using AME. So I made a new sequence, copied all the media from the problem sequence into the new one, and it exports OK. I lose fairly extensive Encore chapter marking, but that's a minor problem. No way to "cut and paste" chapter markers, I don't suppose?
For curiosity value, if I make a duplicate of the problem sequence, all the media in the duplicate sequence has a red bar (unrendered) except for the parts that have already been rendered, which have a green bar. This is straight transferred DVCam media and shouldn't need rendering. If I add some new video to the sequence, it gets a red bar too. Bizarre. Oh, and it won't export.
I tried a few other tricks with the original problem sequence: delete all media, and replace with one new short clip; delete the chapter markers; shorten the work area bar to just a few seconds and try to export "work area only"; turn off tracks; deselect either audio or video in AME... nothing worked to make this sequence export.
I also tried making a whole new project, and importing this one into it. Nothing changes - the problem sequence still wont' export, a copy of it leaves all media "unrendered..." exact same trouble as the original project. But it was while playing with this new project that I discovered that my other sequences did export, leading me back to the original project. That should have been the first or second thing I checked. Brain-dead Sunday.
Conclusion: something corrupt in the sequence, but darned if I can figure out what. Not the media. Not the chapter markers. There's code in the sequence itself, and I guess that must be it.
Enough time wated on this project. Thanks, all!
Gary

Adobe Media Encoder stops responding

I have Adobe CS4 master collection installed here and I've run into a serious problem trying to get it Adobe Media Encoder to do what it's meant to do...encode.
I export the project and in the initial export options window I can set everything up. I proceeed to Adobe media Encoder to finish the job and it opens and shows my video in the que, however, when I click to change the preset, or even click to start rendering, Adobe Media Encoder will simply hang forever. It just stops responding. It never used to do this.
I'm running an intel core2quad q8400 @2.66gHz
on fully updated windows 7 professional, 32 bit.
Nvidia geForce 8400 GS,
3.25 Gig useable RAM
It's not project-specific because i've tried it with another project and it does the same thing. Tried restarting, tried to reinstall Premiere pro and adobe media encoder, tried to reinstall the entire creative suite, tried the premiere-shortcut-in-the-dynamic-link-folder thing...I'm at wits end and I nearing deadline.
Anybody out there who might have conquered this problem under similiar circumstances? Please help...

When I was having this problem, I ended up having to search the entire
sequence for the problem area, a video or image that was causing the encoder
to fail. After narrowing it down to a certain section of the timeline, I
worked through elimination to find the problem video, removing one video,
image or image sequence at a time and encoding the problem area again....on
the two occasions I've had to do this, I found one corrupt video and one
large sequence of images that, which for some reason the encoder didn't
like...re-encoding the problem video and putting it back into the project
solved it for me.

Media encoder STOPS ENCODING!! help!

I am encoding my premier pro project in Media encoder, but it stops encoding every time. It happends on different locations, its not in the same spot every time. I had sooo much problem with permiere cc.
Any one knows a solution to this???
I am exporting H.264 HD 1080p 25
I really need to get my project done

Peferling... I have a positive update! I went to the area that typically made things die. I noticed it was at the tail end of where I inserted a sequence into another sequence. I also noticed I had three tracks in that section with graphics. So I copied all the tracks from the inserted sequence... then removed the inserted sequence and re-inserted the actual tracks. At this point I no longer had an inserted sequence. I then simplified the three tracks of graphics into one. Re-applied my transitions and did last tweaking. I once again tried exporting as H.264 HD... et voila! It worked! Something must have been breaking it.
For now I'm okay and have been able to export into other formats. I want to thank you so much for your input. Regards, Nelson

Media encoder stops encoding at the end of the video (Premiere CC 2014)

I've finished editing a video (just under 4 minutes). When I try to export it to a windows media file (HD 1080p) it always stops encoding at around the 50% mark.
I have tried exporting to a shared network drive as well as the local hard drive with the same results.
I have it set to: Mercury Playback Engine Software Only
I have tried to export directly from Premiere and from Media Encoder.
I looked at where it stops when exporting from Encoder through the preview window. It seems to reach the end of the video and stops right where I fade out to white and the music ends. The interesting part it that the timer shows 50% left to complete
It doesn't crash... it just sits there with the timer increasing and never continues
I'm not using any plugins.
At the point where it stops, I have a "Dip to White" transition on the one video clip and no audio transitions applied to the soundtrack since it ends nicely with the video.
Please let me know if there's anything else I can/should explain to get some help. Thank you so much for your help.
System details:
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: HP Z230 Tower Workstation
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (8 CPUs), ~3.6GHz
Memory: 16384MB RAM
Available OS Memory: 16070MB RAM
Card name: Intel(R) HD Graphics 4600
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Display Memory: 1696 MB
Dedicated Memory: 64 MB
Shared Memory: 1632 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)

Peferling... I have a positive update! I went to the area that typically made things die. I noticed it was at the tail end of where I inserted a sequence into another sequence. I also noticed I had three tracks in that section with graphics. So I copied all the tracks from the inserted sequence... then removed the inserted sequence and re-inserted the actual tracks. At this point I no longer had an inserted sequence. I then simplified the three tracks of graphics into one. Re-applied my transitions and did last tweaking. I once again tried exporting as H.264 HD... et voila! It worked! Something must have been breaking it.
For now I'm okay and have been able to export into other formats. I want to thank you so much for your input. Regards, Nelson

Media Encoder stops encoding but doesn't stop running!

What I mean by this is,
I set up a bunch of files to begin encoding into various different forms, carefully check the settings and hit the go/run/play button and things kick off nicely.
Using the Dynamic Link option to encode right out of Premiere Pro CC project sequences.
Trouble is that occasionally I will return to the machine to see that the current file is still encoding and it's taking way longer than expected. On closer look though, the thumbnail is not moving and the remaing time is just slowly going up and up.
AME shows that all is well and it seems to be working but actually nothing is happening and I have to stop the process, reload the files and start all over again!
Time is precious right now and I can't trust AME to do the job!
Anyone else had this experience?
Formats I am encoding into: H.264 for BluRay; H.264 for Web; Mpeg2 for DVD. Use a mix of VBR 2-pass for the physical discs and CBR for the web (as this is what Vimeo recommend). Shorter files of about 15-20mins or less seem to have more luck than any file over 30mins.
Any help greatlly appreciated.

Hi Thomas,
Thanks for your reply.
It doesn't appear to be the problem though. The encode I have running at the moment has been going for the last 13 hours and in the last two hasn't once got any further along!
Current elapsed time for a 30 minute film going to MPG2 is 13 hours and 18 minutes! Seems a touch excessive for just muxing!
Any other ideas? Would be really grateful for any advice as Adobe Media Encoder is becoming very unreliable and I have tonnes of encoding to do!
Many thanks

Media Encoder stop working

My Media Encoder 4.0.0.0 stop working and the details about this interruption are below.
Please, what I have to do to fix it?
Thanks
Wanderly
Assinatura do problema:
Nome do Evento de Problema: APPCRASH (Event)
Nome do Aplicativo: Adobe Media Encoder.exe
Versão do Aplicativo: 4.0.0.0
Carimbo de Data/Hora do Aplicativo: 48b3250d (Stamp and date)
Nome do Módulo de Falhas: WatchFolder.dll (Module)
Versão do Módulo de Falhas: 0.0.0.0
Carimbo de Data/Hora do Módulo de Falhas: 48b32139 (Stamp and date)
Código de Exceção: c0000005 (Exception code)
Deslocamento de Exceção: 00008a83 Exception range)
Versão do sistema operacional: 6.1.7601.2.1.0.256.48 (Operational System)
Identificação da Localidade: 1046 (Local identification)
Informações Adicionais 1: 0a9e ( Additional data)
Informações Adicionais 2: 0a9e372d3b4ad19135b953a78882e789   ( Additional data)
Informações Adicionais 3: 0a9e   ( Additional data)
Informações Adicionais 4: 0a9e372d3b4ad19135b953a78882e789   ( Additional data)

What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Do you have dual graphics adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Adobe Media Encoder cannot open, cannot export any video.

I'll keep it short, Adobe Media Encoder crashes every single time I open it.
http://img9.imageshack.us/img9/6617/entrypointnotfound.png
Tried reinstalling it, no success.
Any idea how to fix this? Because reinstalling does just squat.
Adobe Premiere Pro also crashes if I try to open the Export dialogue.
I wish they kept the exporting method of CS3, adding another program to the exporting process just complicates things...

Remarkable...
Oddly enough, the solution was to run Adobe Updater and, well, update!
Sorry for wasting your time.

CS6 media Encoder stop responding

Hi,
I'am a frequent user of the adobe Premium suite and uses the media encoder a lot.
Suddenly it tclose up and i'am not able to use it further more.
After starting it up it comes with the message "Adobe Media Encoder has stopped working and needs to close".
Nothing as a cause is given.
I have completely unistalled the adobe suite and installed it again with the same result.
Help,
Ad

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
Such as Windows or Mac, among other things

Adobe media encoder no open

hello' i have problem i bought premiere pro cc and that i want to open the encoder cc to export its no open. what i can to do?

Hi roey206666666,
Welcome to the Forums.
Please try to launch the Adobe Media Encoder and check are you able to launch it successfully. Also, please provide more information regarding the Operating System on which you are working on.
Regards,
Vinay

Why has Media Encoder stopped working?

Hi,
I've been using media encoder to output files. It was working fine but it's suddenly stopped. All I get are 24 kb files. Has anyone had any experience with this issue? Any insight would be greatly appreciated. Thank You !
Johnny

http://forums.adobe.com/community/ame is probably a better place to ask
If you go to the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the Adobe product(s) you use

Media Encoder stops opening

Similar Messages

Maybe you are looking for