Media Encoder: where is the "range" box?

Hey there,
I was just tweaking some properties in the media encoder when I tried to switch to "only export a preselected range of my clip". In Premiere CS3 there was this box right below format called 'RANGE'. Where'd that go???
Thanks
FAZ

While the output range will default to the work area you can adjust the range using the triangles shown on the left hand lower portion of the export settings dialog box just below the preview screen.  Move the top indicator to the desired “in” timecode position and then press the left triangle next to the screen size pull down menu – repeat for the out point only use the right triangle.

Similar Messages

  • Media Encoder CC exporting the wrong resolution in custom preset h.264

    I have two custom presets in Media Encoder CC.  The original file is an mov Lossless 720x480 from After Effects.  One is h.264 mp4 720x480 and the other is h.264 640x480.  When I encode the resolutions are 872x480 and 581x480 respectively.  Not sure what I have going on here.  The presets worked with the same settings just fine in Media Encoder CS6 on another computer.  Any ideas?

    Bump

  • I have tried multiple times to download Media Encoder CC through the Creative Cloud without success. What can I do next?

    What do I have to do to fix this and get the Media Encoder downloaded. I clicked on the "Learn More" link in the Creative Cloud download utility and this is what is returned to me.
    Exit Code: 6
    Please see specific errors below for troubleshooting. For example,  ERROR:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} -----------
    ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
    ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at "C:\Users\TLUTTR~1\AppData\Local\Temp\{5CBDA4AA-FE6D-411F-8EF3-A4B3A625BC9D}\AdobeMediaEn coder_8_LS20\Adobe Media Encoder CC 2014\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com

    Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Why is the Adobe Media Encoder CS5 extending the duration of my video?

    Adobe Media Encoder CS5 takes my (7) second MPEG video and converts it into a (3) minute FLV file. Why does the encoder do this? Why can't I change the video duration?

    This forum for Flash Media Live Encoder.
    Forum path for Adobe Media Encoder:
    http://forums.adobe.com/community/ame
    btw check timeline where MPEG video placed, is this 7 sec. video and rest of timeline empty (As encoding area set to 3 min.) or video stretched?

  • I no longer get a dialog box when bookmarking a page. I am unable to title and save the bookmark in the folder of my choice. Where has the dialog box gone please.

    Whenever I have bookmarked a page, I got a dialog box where I could give the bookmark a title and choose the folder to save it in. Now when I click 'Bookmark this page, no box appears. The page is still saved in bookmarks but then I have to go into Organize bookmarks to put it where I want it. This is time I have not had to spend doing so in the past. I would like to know what has happened to the dialog box, why has it stopped appearing as normal? I really would like it back.

    It was Mcafee SiteAdvisor 3.3 of all things that caused the problem. Can anyone suggest a better/equivalent type of extension I could use?
    Thanks,

  • Using Premiere CC and Media Encoder CC at the same time

    Is this possible?  Doesn't seem to be.  Media Encoder bails on every job as soon as you try to render anything in Premiere.  I guess they don't play nice together, which is surprising.  I was hoping that Media Encoder would pause and wait for Premiere to finish a render.  Instead it dies on every render job, creating 0 size video files... while making a sheep bleating sound.
    Is this a GPU issue?  I have 2 nVidia cards, a 770GTX and 560GTX. (Windows 8.1, 16gb RAM, 3770k CPU)

    As soon as I initiate a render in Premiere, Media Encoder bleats, and all subsequent render jobs bleat and produce 0 size video output files... even if I quit the Premiere render before Media Encoder reaches some of those render jobs.
    I suspect this is a GPU sharing issue.... but can't be certain.
    What do you mean by new install?  Did I install it (AME or Premiere) recently? No.  I've had Creative Cloud on my machine for almost a year, and both Premiere and Media Encoder have been updated periodically.
    To my knowledge they have never worked together, but I only started using the queue feature within Premiere recently, so I haven't used AME until recently.

  • Where is the text 'box' to be able to write in the text?

    Dumb sounding question, I know, but when I try to create a standard text ... the Inspector doesn't have a text box in which to write the text.  Something's fishy.  Just wondering what click I may have missed.
    Here is what I see in my Inspector ... where the text box is supposed to be, there is none.

    Hi Tom, fox_m,
    Thank you kindly.  Duh.  Never thought to do that.  And I've done it before too.  Will not forget this time.
    Mucho appreciated, had to get this off to the client tomorrow morning.
    Ben

  • Adobe flash media encoder compatibility with the lion mac mini server

    Can anyone tell me if the adobe flash media encoder is compatible with the lion mac mini server?

    I am running adobe live flash encoder on a new mac-mini server with Lion and am able to stream video just fine - however I get a hum in the audio. I am not sure whether the hum is caused by the audio input, the camcorder, the adobe encoder, or the combination, but it seems to be the camcorder's fault.
    There is a manual about migrating or upgrading to lion server, but none about instituting a new capability from scratch

  • Where's the suggestion box?

    I've read a lot of these posts and other discussions on line about ATV. Initially, lots of people thought ATV should have a DVD player or a larger disk drive or whatever.
    After using the box since the day after it became available, I humbly offer the following:
    1. Many have complained about the lack of categorization, playlists, etc. I agree with all that. The current design does not properly anticipate large collections of either Movies, TV Shows, or Music. I appreciate the rapid scrolling, but there needs to be some approach to sub-categories. It's not so bad in music because there are artist, album, composer, etc. breakdowns. That still leaves a lot of scrolling....so.....
    2. There needs to be some version of a Spotlight-type search in this box. That should be usable using an onscreen approach (like entering your WPA password), but
    3. Ideally, there would be Bluetooth capability so that a wireless Apple keyboard could be used to enter information in addition to the on-board (slow) method.
    4. Finally, I'm having a heqq of a time getting TV shows to display properly. I record and process them to m4v files with EyeTV. I can fill out all the "Get Info" stuff manually just as it would be with some of the episodes I have downloaded (from iTunes). But in the TV Show section the header says "Shows" and what it really shows me is "Artist". If I'm searching for episodes of NCIS, I don't want to see Mark Harmon, I want to see NCIS. NCIS appears in the "Show" box on the Video panel.
    I have no interest in a bigger hard disk (since I view this as basically a streaming device); I don't want a DVD player. I just want it to do what its supposed to do about 10% better than it does now.
    Basically, this has been a marvelous addition to my system. I have been "setting up" for this for three years and now the missing link is here. Now just a couple of refinements (mostly firmware), please.
    iMac G5, iBook G4, Mac Mini, Mac Mini Core Duo, 2XMacBook Pro, AppleTV   Mac OS X (10.3.9)   All five Macs are networked with two Airport Express units and use AirTunes

    Use the general feedback page to submit your suggestions:
    http://www.apple.com/macosx/feedback/
    Don't choose the iTunes Feedback. That is a music request page nowadays.
    M

  • Ios 7 phone application, where is the number box above keyboard?

    am i missing something. the number box at the top of the keypad of the phone application is gone.
    why?????????? do they now assume that you either dial the number or it is in contacts.
    what about a number which is not in contacts and which you want to copy and paste.......????
    are they nuts????? or am i missing something?

    thanks. though this is still awkward. you have to press and hold to get the 'paste'
    to appear.

  • Where are the check boxes to select/deselct tracks for import or play?

    I just downloaded iTunes 10 on Windows 7, and I don't see the check boxes on the left that allow me to decide what to import or play. Am I missing something? I see them fine on my iMac.

    This box can be shown or hidden.
    iTunes prefs > General.
    Tick *Show list checkboxes*.

  • Adobe Media Encoder where is it?

    I saw the media coder in a lynda.com tutorial and it was presented as if it were a stand alone app and it shows up on the adobe site as part of the CC, but it's not listed under the apps on the creative cloud. Where can I find it?
    Thanks

    It is actually standalone, but not linked in the start menu (if you're on Windows). I'm not 100% sure, but I think if you start the *.exe and drag 'n drop files onto the window, you can encode them to some output formats.

  • Printing images from CS6. Where is the Output box?

    I have been successfully printing images from CS3 on an Epson 3880. Now that I have had to upgrade to CS6, I have a big problem. In CS3 When I went Print-> Photoshop Manages Colors to choose an ICC color profile, there would be a companion Output box, where I could drag the Transfer slider down to brighten the image. I can't find Output in CS6! Since choosing Photoshop Manages Colors turns off the printer's color etc controls, I'm stuck with dark prints and no way to control brightness. Any help HUGELY appreciated.

    Print-> Photoshop Manages Colors to choose an ICC color profile, there would be a companion Output box, where I could drag the Transfer slider
    "Photoshop Manages Colors" disables the printer sliders under CS6 Photoshop
    a proper Source-to-Print conversion should 'match' your monitor
    just for grins try reviewing the updates/troubleshooting/workflow here: printing CS6
    also recommend using a known good file like the PDI WhackedRGB reference file available on my link...

  • Where is the Part Box located?

    I'm trying to print charts from Logic 8, but cannot find the elusive "part box" in order to type in chord symbols, etc. Where is that little bugger?

    Select the staff. Look on the left. There are three sections: display parameters, event parameters ("insert defaults"), and part box (at bottom). If you only see the words "part box" and no symbols, click the disclosure triangle in front of "part box".
    If you don't see it at all then maybe you have the Inspector switched off?

  • Where is the Bounding Box?

    When I select items they do not have a bounding box around them, so it is a pain to resize them.

    CMD+SHIFT+B brought it back... wonder why it went away in the first place.

Maybe you are looking for