Media error encountered, but Auto_end_bkp is disabled in ORACLE cluster

Hello All
When cluster started,resouces are resuming then got suspended,giving the error mentioned in the subject line.
" Media error encountered, but Auto_end_bkp is disabled"
Thanks in advance!!!

http://docs.oracle.com/cd/E18728_01/html/821-2849/m8089.html
839881 Media error encountered, but Auto_end_bkp failed.Description: The HA-Oracle start method identified that one or more datafiles is in need of recovery. This was caused by the file(s) being left in hot backup mode. The Auto_end_bkp extension property is enabled, but failed to recover the database.
Solution: Examine the log files for the cause of the failure to recover the database.

Similar Messages

  • ERROR SPECIFYING ORACLE CLUSTER REGISTRY LOCATION

    Hi all,
    im implementing oracle RAC 10g on Linux version 4, now i've already prepaired the shared disks on my nodes my situiation is am facing a problem in installing the clusterware where in specifying Oracle Cluster Registry Location it gives me an ERROR saying "The Location entered for the Oracle Cluster Registry is not shared across all the nodes in the cluster. Specify a shared raw partition or cluster file system file that is visible by the same name on all nodes of the cluster".
    Thanks in advance!

    No wonder! How can node2 see the drive which is local to node1??? I am assuming this is for your home testing. You need to have some kind of shared storage to implement RAC - typical examples are FireWire or alternatively NFS shares/mounts. There is an article on OTN which talks about implementing RAC using Firewire in RAC. Or you check out my blog entry http://chandradba.blogspot.com/2007/08/oracle-11g-rac-install-on-red-hat-50.html which talks about implementing RAC using NFS shares.
    As I said, these configuration are not for other than your own testing....meaning non-production usage.
    HTH
    Thanks
    -Chandra Pabba

  • Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

    Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
    Sorry for the long title, first time poster here.

    This thread is pretty old, are you still having this issue?

  • Starz PLAY "Windows Media Player encountered a problem while playing this file" error!?!

    My laptop running Windows 7 is having the error, " Windows Media Player encountered a problem while playing the file." when trying to play downloaded movies whereas the "live Starz TV" works fine. My netbook is working properly though, anyone seen this before?

    -  if you're still having the issue, make sure you are running all the latest video/audio codec's for windows media player and win 7   and also take a moment to check this article from microsoft.
    http://www.microsoft.com/windows/windowsmedia/player/10/errors.aspx
     if you find an answer let us know what fixed it!
    buggin wrote:
    My laptop running Windows 7 is having the error, " Windows Media Player encountered a problem while playing the file." when trying to play downloaded movies whereas the "live Starz TV" works fine. My netbook is working properly though, anyone seen this before?

  • UPortal Error Sorry, but uPortal encountered an error that is preventing it from rendering. The error must be corrected by system administrators. Try again later.

    I get this error code when trying to sign into my college web site.
    I had a friend sign into hers from her computer and she did not have an issue.
    uPortal Error
    Sorry, but uPortal encountered an error that is preventing it from rendering. The error must be corrected by system administrators. Try again later.

    I get this error code when trying to sign into my college web site.
    I had a friend sign into hers from her computer and she did not have an issue.
    uPortal Error
    Sorry, but uPortal encountered an error that is preventing it from rendering. The error must be corrected by system administrators. Try again later.

  • Cannot play movie through Netflix. Error states InPrivate Browsing in on, but it is disabled

    i am attempting to play a movie through Netflix and i have an error message that states my InPrivate Browsing is on, but it is disabled. I contacted Netflix and they do not have an answer. Is there an embedded or default for InPrivate Browsing?

    A website can't see if private browsing is enabled.
    Make sure that you do not block cookies.<br />
    You can manage all permissions on the <b>about:permissions</b> page via the location bar.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Essbase Error 1013009 - Administrator Has Temporarily Disabled User Command

    Hi guys,
    I'm trying to load an outline from one server to another server. But during the restructuring process, I encountered the error "Essbase Error 1013009 - Administrator Has Temporarily Disabled User Commands". What does this error mean?
    How can I possibly resolve this error? I'm also researching on this error right now.
    Your reply is greatly appreciated.
    By the way I'm using Essbase 6.5
    Cheers!

    So what do you see in the application log? Essbase.log?
    Are other databases locked as well?
    But during the restructuring process,^^^ I'm a little confused by this -- what restructure? If I copy a .otl file from server A to server B, Essbase has to save onto server B, but there isn't a restructure, I think, unless the act of saving forces that?
    Regards,
    Cameron Lackpour

  • Windows Media Player encountered a problem while playing the file...

    I am running WMP 11.0.5721.5280. I am running XP SP3 with every update that has come out. I have 4 GB RAM and my processor is a Pentium 4, 2.6GHz.
    I have a large collection of music file ripped from my CD collection. Almost every time I want to plat a music file I get a message; Windows Media Player encountered a problem while playing the file, For additional assistance, click Web Help. When this
    error box is displayed, a red 'X' placed next to the file in WMP.
    When I click the "Web Help" button, I am taken to a MS website (http://windows.microsoft.com/en-us/windows7/c00d11b1) which tells me that I should go to the sound device website and make certain I have the latest driver. All of the advice which
    is given does not apply to me. My sound device works fine! I can play CD, DVD (movies), and MP3 files. Even when I use RealPlayer, the same thing happens, but not as frequently.
    Can anyone offer a solution to this problem?

    They'll help you over here.
    Windows
    XP forums on Microsoft Answers
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Exchange 2013 LED=441 4.4.1 Error encountered when trying to communicate with primary IP address

    Hello,
    Im running Exchange 2013 on Server 2012R2, and all has been fine for a while until some users complained that ome of there external recipients are not receiving their mails. if I look in the mail que I indeed see the messages stuck with the comment:
    [{LRT=14-4-2015 14:36:14};{LED=441 4.4.1 Error encountered while communicating with primary target IP addre
    ss: "Failed to connect. Winsock error code: 10013, Win32 error code: 10013." Attempted failover to alternat
    e host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate
    hosts.
    Initially i thought it might had to do with the PTR but I checked and the reverse lookup is fine, also the mail server ip's are not blacklisted. I've tried every suggestion on all forums I could find from changing MTU sizes to disabling TLS but nothing seems
    to work the majority of the mail goes out just fine but to a couple of domains it doesn't any input would be greatly appreciated.
    I have only the internal DNS server configured on the NIC, only one NIC is available and OWA, Outlook and Activesync clients work just fine.

    http://public.wsu.edu/~brians/errors/their.html
    If this is happening when you try to send to several domains, then I suggest you might be blacklisted or otherwise being considered a spam source.
    Do you have an SPF record?  Is your IP address in a blacklisted range?
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • How can I export an iMove Project if the Event file was deleted?  (Missing Media error message)

    Deep iMovie question:
    I accidentally deleted various EVENT files from my iMove EVENTS folder.  Yes, they are really gone ... this is NOT a matter of restoring them from the trash.
    The projects are still there ... I can still watch the projects as long as I am in iMovie ... but if I try to export the Project I get the MISSING MEDIA error message.
    Logic tells me that if I can view the project ... the  file has to be SOMEWHERE inside my computer ... else I couldn't be watching it ... right?  I mean what am I watching if not some file somewhere which has moving pictures stored in it?
    So HOW do I get to something I can export?  What am I watching when I watch the project?
    I have iMove 08 on iMac with OS 10.6.8
    Normally works great for my simple needs ... except if you move or delete an event file ...
    Can anyone out there help? 
    thank you,
    Natasya

    If you don't have the original files then I'm afriad you don't have anything to work with.
    Regards
    TD

  • Error encountered while copying audio stream

    In Captivate 4, I attempt to capture screens. I hear the clicking as it captures, I click END when finished. Program attempts to save and then a dialog box displays with "error encountered while copying audio stream". I am not attempting to record any audio.
    I searched the web and found references to this error back two versions and two years - but no solution.
    Does anyone know of a solution? Thanks.

    Hi there,
    I have experienced this on Windows XP. In my case this was due to a dll (Dynamic Link Library) file not being corectly registered in the Windows XP Registry. If you are using XP then take a look at the following blog post.
    Adobe Captivate 4 Installation Issues on Microsoft Windows XP 
    If this doesn't solve the problem or you are using Windows Vista then please report this issue to the Adobe Captivate team using the web address I have included below.
    Adobe Captivate Feature Request/Bug Report Form 
    Best - Mark
    Visit the macrofireball blog

  • A Critical error encountered while loading webpage.

    Was running 2.1.51  and when browsing to the status link while logged in to the web gui I got a blank web page with the following text:
    A Critical error encountered while loading webpage.
    Reboot router - log back in - can go anywhere except the status page -- get same error page
    made the mistake of downloading and upgrading firmware to 2.1.71   = upgrade completed successfully = presented with the new login screen confirming that the box is running the new code -- now when I log in - I don't get in rather the previous error page - and cant get anywhere.
    A Critical error encountered while loading webpage.
    the url is https://192.168.75.1/scgi-bin/platform.cgi   but it doesn't load only displays the error.
    could someone share another valid management url for the box so I can at least try to get in somewhere before attempting to factory reset this POS ;-(
    thanks.

    Thanks for the response.   Based on the number of crickets that I heard after asking the question, I did indeed factory reset the box.  Luckily I had a backup of the config so it wasn't too painful to restore.
    I beleive the root cause co-incided with the expiration of the trend micro web protection gateway service.
    For whatever reason, I did not receive any notification that the service was to expire but the error experienced was noticed just two days after the subscription expired...  I had successfully logged in without issue and was able to view the status tab only a week earlier.
    be sure to pay the cisco tax on time or they'll lock you out of your box was the lesson learned...

  • Error encountered while signing: The Windows Cryptographic Service Provider reported an error: Access was denied because of a security violation. Error Code: 2148532330

    Last night when i tried to sign a document i received the mesage below and after that it says this document can't be signed what can i do to fix this problem.
    Error encountered while signing:
    The Windows Cryptographic Service Provider reported an error:
    Access was denied because of a security violation.
    Error Code: 2148532330

    I assume you are implying "biztax" application here, right?
    I have contacted their program lead, with no result at all.
    Past days I have been searching for a solution - reinstalls / new systems - no solution.
    This issue appeared a week or two ago only.
    I found http://forums.adobe.com/message/5338853 useful - but no positive results either.
    http://test.eid.belgium.be/faq/faq_nl.htm obviously didnt help either.
    If anyone finds a solution to this issue, please do let me know - any help is appreciated.
    Biztax tells to use the "signature", not the "authentication"  - but it is only Auth. that is showing up as option to sign (that works)
    ps, did you fiddle with the Adobe Reader XI security settings and import that PKI etc as well? I hoped that would be the breaktrough. Sadly i'm still crying in my chair.
    Oh, and dont forget: they claim nobody else got this issue. Maybe one or two people. (We got about 8 customers experiencing exactly the same symptoms at the same time )
    >  I noticed that when I try to open the pdf  document that is 'signed' by the government it is not showing the filename in the title bar, but only " - Adobe Reader".    every piece of info helps I guess.
    Obviously last version of Reader   11.0.03

  • Error "Encountered an error while exporting the data. View the lof file (DPR-10126)

    Hello,
    I would like to have sugestions and help to solve a problem in IS 4.2.
    I've created a view from two tables, joined together with the key from each one.
    Then i've binded the rule with the view (mentioned above) created and calculated score for it.
    The calculation is successful, however when i try to export all failed data i have the following error:
    "Encountered an error while exporting the data. View the lof file (DPR-10126)"
    When exporting failed data from calculations made directly to the datasources i do not encounter any problem, but when i try to export all data to CSV file (not only the 500 results limit) i have this kind of error.
    However, when i visualize the data from the view created, it is also possible to export to csv file.
    Resuming, the error occurs only when exporting all failed data from the view.
    Can anyone help with this issue?
    Thx
    Best Regards,

    Hello,
    Your information is correct.
    I've just confirmed it in the 4.2 SP3 Release Notes and they specifically refer to this issue.
    A user who has 'View objects' rights for the project and a failed rule connection cannot export the failed data. This issue has been fixed in this release.
    Thank you very much for your input.
    Best Regards,

  • Error encountered while polling the resource for the service endpoint

    Hello everyone
    I'm a newbie on OSB world. Yesterday, I've tried to test OSB with FTP transport and got some problems.
    As you see in the title, I've search this forum to get a solution already, but I couldn't find anything. So that I create a new thread.
    I created a new OSB project, create a new Proxy service to connect to my FTP server:
    - service type: messaging service
    - request message type: Text, response message type: None
    - FTP transport: external user (I used a Service account), Post read action: archive, transfer mode: ascii, some directories needed were created in /tmp directory
    - Message flow: Start node -> pipeline pairs
    in request pipeline of pipeline pairs node: i created a new stage: Assign action -> Log (to get file contents, error severity) -> Assign -> Log (get file name)
    The expected results are: file file content and file name (display in osb console) after I submit a text file to ftp server (using test console or ftp client)
    But, some error occur continuously after I submit a text file (I can get the file content because error raise and log catch it). The error message is show below:
    <Jun 6, 2011 10:04:59 AM EDT> <Error> <ALSB Logging> <BEA-000000> < [PipelinePairNode1, PipelinePairNode1_request, show_text_info, REQUEST] file contents: li
    ag
    a
    glakjgk
    >
    <Jun 6, 2011 10:05:30 AM EDT> <Error> <WliSbTransports> <BEA-381602> <Error encountered while polling the resource for the service endpoint ProxyService$FTPTestProject$ProxyServices$FTPTestPS: *javax.naming.NameNotFoundException:* While trying to lookup *'wlsb.internal.transport.task.queue.ftp'* *didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'*
    *javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'*
         at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
         at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
         at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
         at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
         at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
         Truncated. see log file for complete stacktrace
    >
    <Jun 6, 2011 10:06:30 AM EDT> <Error> <WliSbTransports> <BEA-381602> <Error encountered while polling the resource for the service endpoint ProxyService$FTPTestProject$ProxyServices$FTPTestPS: javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'
    javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'
         at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
         at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
         at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
         at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
         at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
         Truncated. see log file for complete stacktrace
    >
    ...There are many BEA-381602 errors that occur continuously.
    My question is how to solve this problem.
    Any suggestion is appreciated.
    Thank in advance.
    Regards, CuongPT
    Edited by: Doubt_Man on Jun 6, 2011 11:17 AM

    Thank atheek1, I remember that I didnt do any manual configuration on my domain :). I use that domain for testing so that I will create a new domain for comparison.

Maybe you are looking for