Media errors - disk image

Cracked open a brand new package of dvds. tried to burn from dvd SP twice now, getting errors, basically trashed two dvds.
As I recall, you can burn a disk image to hard drive then burn that to dvd so tried dumping everything in a burn folder, Audio and Video TS folders and the disk image as well, tried burning that and got this error code 0x8002006E.
is there not some way to check the disk before burning and creating coasters? I forgot how to do that.
btw, the coaster disks are Verbatim DVD -R 16x

If you can save and play a good disk image, then iMovie and iDVD have done their job. The problem isn't there.
Burn errors can be cause by a number of things: not enough boot drive free disk space (should have about 20GB-25GB), poor disk media (many on this forum recommend Verbatim, HP, Maxell), too high burn speed (4x is about right), conflicting plug-ins, defective burner, etc. Sometimes if your menu buttons are outside the TV safe viewing zone, that can cause problems. Chapter markers less than 2 seconds away from the beginning or end of your movie, or within a transition, have been known to cause problems. Check also to make sure that your menu content does not exceed 15 minutes duration.
The easiest thing to start with would first be to make sure that you have sufficient disk space. Next would be to change disk brands and see if that solves it. Doesn't matter if your current brand worked once before. If that doesn't work, try burning a different project or a test project to rule out this being a project related issue, and also burner issues. I would try burning "the long way" as you say, and with disk utility. You could also open your project in a new user account, as sometimes that will work. Then check out some of the things that I mentioned at the outset of this response.
You might want to take a look at the following troubleshooting article and see if there is anything in there that helps:
http://support.apple.com/kb/HT1583?viewlocale=en_US

Similar Messages

Error disk image ilife 8 still hd6 imovie

Ok have a bug on iWeb 2.0 ilife 8 can't publish, now with my iMovie HD6
don't like ilife 8 no time line, now all the time error image disk ????
OK, i built a project iMovie HD 6 on version ilfe 6 work verry good image disk to, i install ilife 8 and return to correct somme little sound and open my iDVD told me a message say ok, look my project very good, burn image disk and before the end have a message 'error bla bla bla piffffff!
Another bugs there
michel
Michel

Any chance the first disk image was still mounted on your desktop when you put its .img file into the trash?
Thanks! I think you nailed it!
I had tried playing from the disk image with DVD player first and it played fine, but then I decided to do more edits so I trashed the .img file. I forgot that I had mounted it. When I tried to burn the second disk image, Disk Utility must have still used the first image, even though it had been trashed, because it was still mounted.
However, the icon showing when something is mounted was not there.....until after I had made the final image and then I could eject the mounted disk whose path on DU showed that the .img file was indeed in the trash.
Do you think that would have made its name change to 'disk 5' and would that have caused the burn to stop just 3min short of the end?

Getting error "disk image....pro.sparsebundle is in use.....try ejecting the disk

when trying to have my time machine backup my MAC harddrive I am getting an error message "disk image....pro.sparsebundle is in use. try ejecting the disk....I don't know where to find this disk image to eject it.

Try the following:
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in to the back of the Time Capsule
Wait a few minutes, then try another backup

Time Machine error: Disk image could not be mounted

I had two macs 1 and 2.
1 was stolen. I bought a new one (New 1) and it took the place of mac 2.
Mac 2 was reformated and restored from the TimeCapsule with the backup from the old 1.
The new 1 succeeded in continuing the back-up from 2.
But the mac 2 can't get used to backing up on another sparseimage on the Time Capsule. The result is, that both of the computers now makes back-up to the same sparseimage as if they were two users on the same computer. But the TimeCapsule doesn't accept that they can be using the sparseimage at the same time and claims that the backup is used by another.

I was encountering the same problem. I would navigate to my external drive and I would see the folder for the sparceimage and it would have a circled minus sign icon on the folder and it was not possible to mount it using DiskImageMounter. I would get a window stating the "operation not supported on socket". When I looked at the Time Machine preferences, the disk image was not available so I could confirm that it was chosen as the backup disk. However, when it became the scheduled time for Time Machine to do its scheduled backup according to the information in the Time Machine preferences pane, the disk image mounted and the backup seemed to commence. Similarly, when I went to Time Machine and asked it to "Backup Now", the disk image mounted, and the backup proceeded. However, the disk image then dismounted and again it was no longer available to Time Machine. When I ran Time Machine, I could not choose the disk image and restore files from it because it was no longer mounted.

Disk images failed to mount - codec overrun

Hi,
So after searching through the related posts I have been unable to correct my probelm, which is:
I am unable to open some .dmg files. I have tried to open three different .dmg files from a variety of sources and they all return the same error:
disk images failed to mount - codec overrun
However, I was able to update my system to 10.4.7 using the updater. This did not solve the problem. I then tried load the combo version of 10.4.7 as suggested in a different post and while it didn't load (I accidentally grabbed the powerPC version) it was able to open the .dmg and look in them.
Disk Utility is unable to attach the three that won't open. The first two Disk Utility was unable to verify or repair. The last (a cars game demo) was successfully verified but still came up with the codec overrun error when I tried to attach it. Finally I have tried removing the following two files and then restarting, to no effect.
/System/Library/Extension.kextcache
/System/Library/Caches/com.apple.kernalcaches/
I'd appreciate any help offered. A search on codec overrun was of no use. I searched for "mount failed disk images" and variations of that to find what I have already tried.
Thanks
Pete

I am havin the same problems. codec overrun
I am trying to download stuffit from their site so I can open a program for school.
I tried to download the dmg file from the apple site but was given the same error. Codec overrun
Also I attempted to get the updates from the Apple site.......same error.
So far this computer will not download much of anything without some kind of an error. Essentially this Imac is a $2000 jukebox. It does play music wonderfully.
My roommate was able to downlad easily from the same internet connection with no problem the windows version of the program from te same site.
This is a brand new out of the box iMac. 20" 1 gig 250 GB machine. First Mac for me and it is turning into a real headache.
Any help with the codec overrun would be appreciated.

Disk Images Failing to Mount: Reason - Broken Pipe

Ever since the recent 10.4.9 patch, I have been unable to install .dmg files onto my MacBook. Everytime I try to execute a .dmg file, I get the following error:
Disk Images failed to mount:
Program: Messenger602.dmg
Reason: Broken Pipe
I have absolutely no clue as to what it means. I've used the Disk Utility in order to repair the disks and permissions without any luck. I've restarted my computer a couple of times and that failed. I've also checked the forums on the subject and there were some topics on the subject but none of them were able to fix my problem.
Any help would be greatly appreciated! Cheers

It turns out that the 10.4.9 patch didn't install fully and corrupted some system files which is why I was unable to open .dmg files.
I just ran and Archive and Install and everything works fine now!
Hope this helps to anyone who has the same problem

Even after resets get "The backup disk image "/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle" could not be created (error 22)."

HELP! "The backup disk image “/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle” could not be created (error 22)."
TC estimates over 750GB for full backup.
Late 2010 MBA is connected wirelessly to
802.11n (1st gen) TC that is connected via ethernet hub built into house to motorola router using charter.com for internet.
I have had same problem for over 150 days and multiple reboots, restarts in proper order, firmware updates, unplugs with 5min plus gaps, bypassing the tc and using external 500gb WD mybook via usb to time capsule, replacement of the WD mybook to new 2TB Free Agent GoFlex drive, etc, etc, etc! Note: I originally named my MBA hard drive MacBeth, but at some point months ago, it said backup already existed and system automatically created MacBeth (2), worked for a while, then stopped again, despite trying nearly daily.
I gave up and started using Carbon Copy Clone daily for just the 128gb on internal SSD of my late 2011 11" MacBook Air, but need to get past these time capsule errors to back up the external disk! Due to lack of space in MBA, I had long ago transferred both itunes and iphoto and all imovie/fcpx files to a 1tb external disk (WD Passport) that I keep in my bag with MBA. It is partitioned with 150gb for cloning the MBA, and over 750gb for media/itunes/iphoto/etc.
Also, I have endured months of "your hard drive is full" messages and system lockups, applying the solution given to me by genious bar (deleting all aol.com outboxes/recovered messages/spam/trash under library/mail/V2/Mailboxes folders, empty trash, restart....watch recovered hard drive space mysteriously shrink next couple days to zero.....repeat)
Due to lack of space, I had not been able to do javascript and other system updates. Yesterday, I noticed even safari bookmark bar had mysteriously emptied (not disappeared, I can hide and show the space where the bar used to be - it is just blank area with no data except for eyelass-book-topsites icons), so I transferred a few large quicktime movie files recorded with isight camera to the external disk, and freed up 20 gbs for the first time!
This got my hopes up yesterday because after I completed all system/software updates, suddenly the bookmark bar showed up and I was able to start the time capsule backup! It took overnight preparing for backup, but finally started and progressed to 12gb of the 100gb+ needed (i guess the update where it left off months ago for the estimated 750gb for the full backup?), then I put system to sleep and took it with me (thus leaving the wireless time capsule network as I do daily fully expecting it to continue when I returned home in the evening.) But alas, upon return, back to the "Time Machine could not complete backup, The backup disk image ".....sparsebundle" could not be created (error 22)" Ugh! More reboots, unplugs, 5min gaps....still Ugh!
So the problem continues...please help! Here are my settings:
About this mac:
Mac OS X V. 10.7.5
processor 1.6 ghz intel core 2 duo, memory 4 4g 1067 MHz DDR3
software up to date!
Airport Utility:
V 6.2 (620.33)
both internet globe and TC show green dots in graphic, however internet occasionally shows yellow then goes to green, but still gets error 22. Suddenly TC showed explanation mark and says lost connection and asked if I wanted to 'forget', gave same errors, then mysteriously went back to green, but still got error 22!.
Internet:
connection: connected, displays router address, 2 dns server, and domain name: charter.com
Time Capsule:
shows network, ip address, serial number, version 7.6.3, status: (green dot) Setup over WAN,
wireless clients: phones, macbooks (including this MBA), printers, wii
If you need other settings to help me, just ask! I have read a few of the other solutions in forums, but trying not to erase disks, especially since it worked for a minute yesterday!

To step sideways.. why not just use CCC to backup the 750GB of the hard disk to the TC.
You need to understand this is going to be a super slow process and each time you stop it.. it is going to give issues. CCC will at least do a more reliable job of it than TM.
I would also say.. this is going to be tough without ethernet. You need to understand the backup speed over wireless can be 10GB per hour.. that makes 75hrs to backup the disk. The air needs to run non-stop doing that.. without you touching it.
I would get another external drive.. plug that into the MBA and if you really want to use TM.. make a backup one to the other.. but CCC will again do a better job and work faster. It will be much faster than over wireless.
I am trying to think of ways around the issue of just speed.. but plainly you have lots of other issues.. being the simple unreliablity of the TM to identify the TC.
If you want to make this work.. give yourself a weekend.
Load 5.6 utility into the MBA..
http://support.apple.com/kb/DL1482
Take the TC back to 7.5.2 firmware. It is a really old version and latest firmware does it no good at all.
Wipe its hard disk using erase and start over.. give it new names for everything.
So call it TC
Set the wireless to 5ghz and name it TC5ghz
Use WPA2 Personal security. Use a 10 character passkey non dictionary.
At 5ghz you should get 2x the speed as at 2.4ghz but the air will need to be right next to the TC..
(alternatively buy the USB to ethernet cord apple have available.. it is $30 in the apple store and do it over pseudoethernet. http://store.apple.com/au/product/MC704ZM/A/apple-usb-ethernet-adapter That is the wrong store but you get the idea. )
WIth a fully clean system.. now do a full reset of TM.
See A4 http://pondini.org/TM/Troubleshooting.html
Direct the TM to back to the TC.. and make sure the external hard disk is not excluded.
Of course the TC has to be 1TB version to fit that much data.. goes without saying right.
Even over pseudo - ethernet this will take many hours.. and you basically have to leave it to work.. do not touch it.. make sure the MBA cannot sleep though.. turn off sleep.. beforehand.

There was an error creating your disk image.

FCPX v 10.1 In exporting a completed project to a disk image, the following error message came up: There was an error creating your disk image. VIDEO_INPUT_READ_ERR
It only has occurred on one project (so far).
Has anyone encountered this type of error and found a suitable work around?

If it only happened with that one project, a reasonable guess is that the problem is in the media – either an original clip or a render file. Deleting the render files from the File menu for both project and events would be a good place to start. Turn off BG Rendring and without rendering, see whether a short selection will export as a master file. If it does, try the img again.
Russ

I am having issues with Time Machine. Error message "The backup disk image could not be created.

Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end.
TM sees it and it is mounted but cannot go any further. HELP?!!!!
Thanks
-A

How should it be connected? It has a usb port and ethernet. The USB on the ExHD looks like the port on the back of my computer, so I would need one wth the same ends? Do they make those?
I can usually fix most my comp problems myself, but this new ExHD has stumped me.
Thanks for your help.
-A

I'm having trouble backing up my second macbook to a new time capsule. continue to get an error message -- "Time Machine Error. The backup disk image could not be created." Is there something I need to change in my time capsule or time machine?

I just set up a new time capsule. it worked fine on my first macbook. But now I cannot backup my second macbook. Getting "Time Machine Error" "The backup disk image could not be created." Do I need to change settings on my time capsule to allow the second computer, or do I need to change something on the computer to allow time machine to work right?

Try #C9 in Pondini's Time Machine Troublshooting
http://pondini.org/TM/Troubleshooting.html

How to fix this error message The backup disk image "/Volumes/AirPort Disk/FARES DEL VALLE's iMac.sparsebundle" could not be accessed (error -1).

how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).

The troubleshooting C17 is the specific article.
http://pondini.org/TM/Troubleshooting.html
This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
So download the real utility. Run it instead of v6 toy version.
http://support.apple.com/kb/DL1482
Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them.

Source Material error when burning disk image

Well, I've been haunting these forums for 10 days, finding answers to every darn problem under the sun I've encountered! (thanks folks, I've been near hysteria) Now I have yet another problem, and I cannot find an answer in the forums (sorry if it's there.)
I have built my movie in iMovie, imported to iDVD, created my disk image, played my disk image (worked perfectly), connected my brand new LaCie external burner, loaded Toast 6 Lite, dragged my mounted disk image icon into the window, popped in my Verbatim DVD+R and let 'er rip.
And, poo, I'm informed that 4 files are in an unsupported format and cannot be imported. EH? I thought the disk image kept all self-contained? I press onward, and hit burn. Churning, churning... and then this message:
"Could not record disc because there is a problem with the source material. Result code= -18774"
Trying to burn via Disk Utility doesn't work either. My mounted disk shows up, but when highlighted the burn button is grayed out. Only when I click on the .img file is the burn option lit.
Am I supposed to drag the .img file rather than the mounted little disc icon? PLEASE HELP. These movies were SUPPOSED to be Xmas presents... now I'm praying for Michaelmas gifts!
TIA

ohmygosh. Lightbulb! I've been trying to burn the file_name one and not the file_name.img one. I assumed the point of mounting the file was to burn it, but it's only to preview it, yes?? So, I did that via Disk Utility, and it worked!! Only thing I can't figure is how to set the burn speed. I know slower is better, but can't find the place to tell it the speed. It never asks.
Toast still gives me the source material error. I do have the 'video' tab selected, and I've done the drag-n-drop method AND the 'add' method ('copy' is only for transferring data from one CD/DVD to another in my version, evidently). Toast doesn't allow me to grab the .img file, so I'm assuming IT wants the mounted file_name one? I'd still like to be able to use Toast to burn, so a solution to this would be appreciated. I'm using Toast 6 Lite, BTW.

Disk image Restore returns "Could not validate source - error 254"

I had backed up an older G4 with a disk image of the boot disk. I was having severe problems so I reformatted the boot drive and started a restore (using disk utility from startup disk). The restore started fine and ran a while but then "stalled." The "progress" bar stopped and the system just kept "hitting" the Utility DVD install disk non-stop (as shown by disk access light).
Now when I try again, I immediately get a "Restore Failure - Could not validate source - error 254"
The disk image being restored is on a hard drive. I copied it to another drive and tried again with the same result.
This is being done on an old G4 Tower, dual 1 GHz PPC under 10.5.8
Comments?
(This won't kill me as all my data files are also on my MBP, I just don't want to have to reinstall all my apps, setups, etc.)

Yes, for my "real" machine (my Intel MBP) I have images, clones, and Time Machine Backups not to mention my data files written to DVD. I've got at least triplicate backup. This was a old machine I was setting up for a specific purpose. I'm not losing any data but I just didn't want to have to reload apps and such. But guess I have no alternative. Thanks for the tip. I had never used the "scan for restore option" before so I learned something. Usually I just trust my multiple backup method so if one source is bad, no big deal. Thanks baltwo!

Error message from Time Machine : "Disk Image ... is already used"

Time Machine was working well till today. I receive an error message saying that the disk image «Volumes/Time Capsule/ ... sparsebundle» is already used.

It just means Mountain Lion is so stupid it cannot remember its own name.. let alone the TC or when it last connected..
Reboot the network to give it a swift kick.. restart in correct order.. modem .. router/TC... clients.. 2min gap.
See C12
http://pondini.org/TM/Troubleshooting.html

Error code -36 on Time Capsule w/ disk image

I am getting this error:
"The Finder cannot complete the operation because some of the data in "_Insert file or folder here_" could not be read or written." (Error code -36)
I have set up a 1gb Time Capsule with a 650gb disk image (for general disk use) & 300gb for Time Machine. The Time Machine back-ups are working fine. I cannot copy anything to this newly-made disk image, though. Any ideas?

Time machine no longer working: Apple Support Communities
Time Capsule Error code -6584: Apple Support Communities

Media errors - disk image

Similar Messages

Maybe you are looking for