Media Extender Problem with WRT300N

I have the Linksys WRT300N wireless router.  I am having problems using the wireless connection with my Xbox 360 and my PS3.  The internet portions of the consoles works fine.  Im running into problems when I try and use either one as a media extender.  Both the PS3 and the Xbox 360 are using the wireless adapters.  Ive made sure that my computer is set up for media sharing and that my Windows Firewall is configured correctly.  Ive looked at the setting of the router but it seems pretty complex and I dont know what to change if anything to resolve the problem.  Could anyone tell me what the setting should be on the router to enable media sharing?

I dont think that there is some settings on the router .... but you can follow this settings ....
Access router setup page ....
Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2)   On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
   ip address :- 192.168.1.20
   subnet mask :- 255.255.255.0
   default gateway :- 192.168.1.1
Please assign the dns address on the xbox
  primary dns :- 4.2.2.2
  secondary dns :- 192.168.1.1
6) Please try to test your xbox live.

Similar Messages

  • Media center problem with Qosmio G35-650 - error message

    hello all
    I have a problem with media center on qosmio g35-650.
    When starting live tv , an error message appears and writes "application failure please restart your computer again. if problem persists again please contact with your hardware assistance"
    It was working yesterday and today something happened.
    Also it cant find any tv signal available. Is it a hardware problem?
    regards
    cem mete

    Hello
    Please dont be mad on me but in most cases is the user the problem and not the machine. I really dont know what is problem in your case but if the unit has well TV signal there should not be any problem.
    Your unit must be an US model. Those notebooks are not known to me but I presume that Qosmio player is preinstalled too. I have G20 and TV works perfect (WMCE and Qosmio player). What is with Qosmio player in your case? Does it work well?
    Be sure that TV tuner is listed properly in device manager and also TV antenna is connected properly.

  • WRE54G wireless extender problem with WRT600N wireless router

    My Vista laptops work fine with the WRT600N router but not with the WRE54G extender. On the other hand my XP laptop works fine with the wireless extender so I know that both router and extender are working. Linksys tech support told me that the WRE54G is not compatible with the WRT600N, which is simply not true. With my XP laptop the signal goes from poor (5-10 Mbps) without the extender to excellent (54 Mbps) with the extender. Also, the lower blue light on the extender blinks indicating data transmission. I can access the setup page of the extender only with the XP laptop and wired desktop computers but not the Vista laptops. I suspect there is a Vista network setting that is the problem. I've turned off the firewall but to no avail. I've also switched between mixed mode and G-only, which made no difference. Anybody have any suggestions?

    pfl wrote:
    I have a secure wireless network (WPA). Perhaps my 4-5 year old XP laptop is the only laptop on the planet that works with the WRE54G-WRT600N combination. But I can assure all the doubters that this laptop categorically works flawlessly when I would otherwise be out of range without an extender. Good luck to spalaw. Please let me know if you are get your WRT160n to work with the WRE54G, especially you're able to connect with a Vista laptop.
    Hi
    I am Afraid and wont be surprised if ya all people are nt able to use a N series Router with a G series Range Expander !
    the Reasons is simple - N series is not BackWard Compatible as u check out the sources around. (Back Ward Compatible means compatible with the previous versions for its wireless Band , e:g - G band and B band.)
    as far as my experience is concerned regarding the Range Expanders , me and my bud wasted a whole Week Configuring a WRT350N and WRE54G v3 , and it worked somehow on the seventh day  for an hour and Lost the connection again! Dayumm !
    and we tried setting up with the same expander with WRT54GS v7.2 , it worked like a charm.
    Conclusion : " WRE54G is a g series 2.4 Ghz expander which will work fine with all g series router though may not work with N Serious routers."
    and if you really wish to Use something which can actually Extend the range for ur N routers signals , Better go for WAP4400N !!!!!!
    And if someone still wish to run around , wanna try some tweaks (which i dont preferr )!
    for WRT600N , just enable 2.4ghz band . as Range expander doesnt support 5 Mhz.
    Use Only standard Channels . e.g : 1,9,3,11 .(No Wide and stuff.)
    Try using WEP encryption first . (cause thats how we made WRT350N worked for a while. sighs)
    At last , Wish u Luck.
    Pe@c3
    "What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

  • Encoding Problems with WRT300N V2

    Hello guys,
    i have following problem:
    I have a WRT300n Router and it seems to have problems with WPA2 encoding. I have 2 different deviceses (a SMC Ethernet Bridge and a PS3) trying to connect to my Linksys wireless router. No chance in WPA2 mode but when I try in WEP-Mode, both devicec can connect to it.
    Are there known encoding problems?
    Any idea what i can do?

    It is able to use. But my router always drops the connection. WEP is no problem, but ... what about low security and Wirless N is not enabled ??

  • Media Browser Problem with iWok'05

    I have been encounting the same problem since yesterday: if I open the Media Browser in either Keynote or Pages, the application starts to in-respond. What do I gonna do? I tried reinstalling it, but it still doesn't work.
    Thank you very much!

    I've encountered this problem with iWork also. I don't know of a workaround with iWork '05, but I don't see this problem with iWork '06.

  • Problems with WRT300n & WPC300n

    Hi guys!
    I have a problem. I am reviewing the two Linksys-thingys WRT300n & WPC300n for a pc-mag, and for the last 4 hours I have been all over the internet trying to get a clue...
    First of all both items works (not well (low range/falls out once in a while), but there is a connection after all). My main prob is, that I cant get the WPC300n to go faster then 54 Mbps... In the Linksys-control it says Wide Channel: N/A... like this is just regular G-speed...?
    I have tried to turn on all the encryptionfacilities but it doesnt help. All the drivers and firmware are the newest...
    Any of you got a clue?

    I'm having the same problem with the same equipment. I hope there is someone that can help us. PLEASE

  • CS5.5 Extended - problem with importing audio .mov files

    I would like to import an audio file to my PS5.5 Extended. It supports .mov files, so I tried to File->Place a mov file exported from Audition CS5.5. But Photoshop says: "Could not place the document xxx.mov because the movie file could not be opened."
    The mov file doesn't open in Windows Media Player either and the message is that the codec is unknown. But it opens without problems in QuickTime, as audio.
    I am not sure if this is Audition or Photoshop problem, but the format, or codec which is used should be common to both programs, as they are from the same CS5.5 suite. By the way, I have all settings set to default in Audition. No idea what codec it is using.
    My purpose is to import sound, and because PS Ext does not support sound files as such, I found a workaround in the internet to import a mov file. But it does not work for me..

    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/
    Do you have Quicktime installed?

  • Media sync problem with BB LINK

    I've down every thing to make the BB LINK sync my media files(pictures,music,videos....) but it did not work.I've a mac and I instaled BB link several times, also I restore my BB z10 a few times then I instal BB LINK on my friends ps which runs WINDOWS 7 but no succses, even I swapped my BB z10 because I tought there is somting wrong with my phone and I got another brandnew phone but still I am not able to sync.can any one help me.

    Hello there
    Syncing from my device to computer and computer to my device is impossible. On my Mac when I try to sync (pictures,music,videos), "preparing to sync " appears takes more than 5 minutes, then "sync complete" pops up but nothing has been synced to my device although in my device tab on BB LINK software shows the synced file. Also on the device tab shows that my devise has "0 free space" but my device has 11.7 GB free storage space in fact I couldn't sync anything except my contacts which took so long to sync. I've never received any error  massages on my Mac at all. On PC almost every thing is the same as on my Mac except a few error massages like "connection error" or when I plug in my device some USB drivers could not be install also the device dose not appear on "my computer " on PC and on  Finder or iPhoto on my  Mac. I like to know if my device has a problem then I still have time to replace my device if not please help me to fix the issues.
    Thank you

  • MOVED: Media Live : Problem with graphics card with vista Ultimate

    This topic has been moved to Vista problems.
    https://forum-en.msi.com/index.php?topic=112530.0

    Thank you for replying. I had no idea I had a response. It is a Windows 7 Home Premium. The game is actually now a few different ones for my child, Baby Luv, Brave & Disney Princesses. None of them will work. I have an Intel Graphics Media Accelerator 3150 graphics card in this (Compaq Presario All-In-One Desktop PC) and I just posted another question in the forum about wanting to know if I can replace the grahics card with a HD card and if so how? I have looked online but can't find an answer. Is it possible to replace the card or with it being an all-in-one is it not possible? Thank you.

  • Windows 8.1 Pro with Media Center - Problems with Activation

    Hello.
    I was one of those who tried Windows 8 early and got a Windows Media Center key for free.
    Today through Dreamspark Premium I got a Windows 8.1 key.
    I normally used my new Windows 8.1 key and Windows 8.1 were activated successfully and because I remembered I had a Windows Media Center into my e-mail archive folder I used it in "Add features to Windows 8".
    Windows accepted the key, added Windows Media Center and rebooted.
    After the reboot, Windows 8.1 got deactivated and it won't accept my genuine Windows 8.1 Pro key.
    I do not wish to format my pc or re-install everything . I just want to activate my Windows 8.1.
    I do not care about Windows Media Center, I just want to activate them with my genuine key.

    Hi,
    Based on the current situation, I would like to suggest you to contact Microsoft Product Activation Center by telephone to verify the product key and activate your system.
    To start the Product Activation Wizard, follow these steps:
    1. At the Start screen, swipe in from the right side, or hover your mouse in the upper-right corner of the screen to display the charms menu.
    2. Tap or click the Settings charm.
    3. Tap or click Change PC Settings.
    4. If your PC is not activated, PC Settings will provide instructions that are customized to your activation error. If telephone support can provide help for your error, tap or click the appropriate link, which may resemble one of the
    following:
    a. Activate
    b. Activate by phone
    c. Contact customer support for help
    For the detail information, refer to the following link:
    How to contact a Microsoft Product Activation Center by telephone:
    http://support.microsoft.com/kb/950929
    Additionally, if the issue still persists, I suggest you contact Dream spark support for help.
    https://www.dreamspark.com/Student/Support.aspx
    Regards,
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Creative Media Source problem with removable hardd

    Hi,
    I have my mp3 files stored on a external harddisk, using the following folder structure:
    f:\mein musik\artist\ album\*.mp3. The problem I have is that the Creative Media Source program keeps forgetting that my "mein musik" folder contains the mp3 files that I'd imported before in my "PC Music Library". Just for info: I "told" Media Source to keep the PC Library in folder f:\mein musik.
    Every time I restart my PC, the PC Music Library shows no mp3 tracks at all, even though my external harddisk is connected. This is of course extremely annoying because it takes many minutes before my +/- 3000 mp3 tracks are imported again.
    What could be he cause of this problem and how could I overcome this? Would I need to use for my PC Library a folder that is located on my "normal" internal harddisk?
    Many thanks in advance for your help,
    Tom

    I believe the Media Sniffer feature of your MediaSource is enabled to sniff your external hard disk folders. Try disabling the sniffing of your external hard disk.

  • Blackberry link media sync problem with BB Z10 latest software

    I've just upgraded my BB Z10 software to 10.3.1.1565 and had problem when trying to sync photo. I used USB cable as my PC has no internet connection. It was working perfectly before upgrading software to this version. Other media (ie. Music & others) seems ok. When I selected Picture in sync media, it shows loading sync media relationship and kept on spinning forever. Is there any other way to sync or transfer pictures from my device? I dont have laptop.

    You can transfer pics from Device to Computer using BB Device Manager which is found in Programs and when clicked moves to Notification Tray, open it from there and right click the Volume you want Internal=Device, External=SD Card, then click Explore, it should then open to the folders, you can create folders in your Documents then transfer files back and forth.

  • Printing problem with Photoshop CS 6 extended and HP printer

    Hi all, long time browser, first time poster.
    This is a weird issue, it should be noted from the first that I only have weird computer issues. I work at a technical High School where we have the whole Adobe CS6 Extended suite installed. We are running it under a fully patched version of Windows 7 and all the CS6 updates have been applied on 25 machines that all have the same issue. The problem is that when the students go to print to our HP Color Laser jet CP6015DN, the job can been seen loading into the queue, it races up to about 45MB, then sort of strolls to load the rest of the document, usually about 59 to 75 MB's in size. Then I watch the message go to processing, the front panel of the printer says processing, then the print job disappears from the printer queue and the printer and there is no print out. I printed out the usage job log and it shows none of the failed attempts to print and I check the event log page which does not show the errors either.
    Looks like a bad printer driver, right? So I download the new HP Universal printer driver, I normally do not do the Universal driver route as so many of my older printers have problems with it, but the CP6015DN seems to have trouble accessing the extended tray 5 with the specific drivers, but I have the same printing issue with the new Universal driver and the PS driver. So I wander through the HP manual and it suggests using profiles to print to the printer and move the color handling from Printer Manages Colors to Photoshop manages colors and I track down the ICC profiles for the printer on the HP site as the link in the book is dead, so try the CP6015srgb_d50.icc, CP6015_cmyk_d50.icc and CP6015.icc, I try all of these profiles with the newest PS printer driver and the same error, goes to the printer and into the bit bucket. Still no printout or error message.
    Strange thing is that if I do a test print, it prints fine, if I open a tif file in Photoshop, it prints fine, now the teacher says if they print to the Xeorx 7760 in the next room, it also prints out fine. It should be noted that we had so many issues with configuring the Xerox and adjusting controls it was the reason we purchased a HP proofing printer in the first place. But the next door lab is all Apple, which doesn't seem to have this issue. So I open the test document and save it as a PDF file instead the native Photoshop format, and it prints fine, which from what I've been reading on the internet may be the preferred way of printing proofs, I don't know, I've never really used Photoshop, but the teacher says this isn't an acceptable fix and the students should be expected to manage a number of revisions saved to PDF format, me I just go up a number at the end of the file name for every correction when editing documents.
    Any suggestions you have would be appreciated.
    Windows 7 X64
    Photoshop version 13.0.1 x64
    HP Color Laserjet CP6015 DN model number Q3932A
    Dell Optiplex 980 i5-650,  3.2Ghz, 8 GB RAM.

    Yes, Photoshop is up to date at Version 13.0.6.  I have even gone so far as to uninstall CS 6 and put CS 5 back on and still the same thing.  This is really frustrating, the people at Canon try to be helpful but wind up saying it's an Adobe problem and of course you can't talk to real people anymore about CS 6.  My research on the Internet has turned up nothing so I'm stuck.

  • Problem with Fios TV Central and my Home Media DVR...

    I have had Fios for some time and I'm upgraded to the new 1.6 img. I can see and my vz media center works with the home dvr and the other  stb's can view dvr recordings from the dvr.
    My problem is after logging into the Fios TV Central site it never finds my dvr.....it scans for some time then says there is a problem and to try later. I have done everything (I think) that was required to activate this on my dvr and the tv central site. I've rebooted the actiontec, unplugged and plugged in the dvr stb and the other stb's one at a time with no change.
    Any suggestions?
    Called tech support but haven't heard anything from them.
    Cwmson

    O.k.
    Here's what the tech that came out to the house did.
    We first went through the simple stuff and he called his tech guys which didn't really know what could be the problem since this is BETA.
    Finally he had to leave but came back the next evening to replace the MI424WR router and the DVR.
    He did the router but there system to register was down Friday evening so he had to put the old DVR back and come back the next week.
    He finally came back on Tuesday morning and installed the new DVR and it registered ok.
    Then you have to wait for the Fios TV Central and the DVR to update.....takes a couple of hours usually.
    I finally was able to set up FTVC and it's working both from my computer and from my cell phone.
    IT WORKS!!!!!!!!! Yes!
    I think it was the DVR personally because that was the last piece of equipment we replaced and it started working.
    Cwmson

  • Problem with iTunes and not transferring media.

    This is differnt since the media it won't transfer has already been on the iPod once before. My iTunes won't tranfer some of my songs (that it did before) and some of my TV shows (that it did before as well) for some reaon or another. I have them set for autosync, no manual transfer, they are the latest episodes of the show, they are checked, and I have tried syncing it about eight times using different methods to get it to sync up. The songs a like every other song and not a problem with them.
    Any ideas?

    Everything corrected.

Maybe you are looking for

  • Structure or field where serial number is stored, while saving delivery

    Hi All When user will create an OB delivery ...he will enter the Serial Number of the Materials and then user will hit PGI..... before the document get saved i want all the serial numbers that user has entered....and i want to process them....those s

  • Proxy adapter (XI Adapter)

    Hi masters. I have a doubt about communication with Abap Proxys. Abap proxys attack directly to Integration Engine. My doubt is, this message that arrives to Integration Engine needs to be adapted? There's an adapter in Integration Engine that conver

  • Error during Business Content Installation of a query

    Hi, I was trying to install the Standard query(0IC_C03_Q0019) only its query elements and not infocube from Business content and after install(Simulation mode) it went into an error showing Bex transport request is not available or suitable and Error

  • Loop an MP4 with the movie controller

    It seems there should be an option to loop an MP4 movie in the FLV Playback but I don't see it any where. So what to do if I want a movie clip to loop indefinitely?

  • What's new in Acrobat Professional 8.1.2?

    Where can I read what's new in 8.1.2? It was automatically downloaded and installed yesterday, but I can't seem to find info about what was changed. Lena, Sweden