Media files are published to blog with the wrong hostname

Hi there,
I've changed the hostname of my server and everything is working correctly with the wiki/blog server but when I submit a podcast producer job, although the job finishes without error, the media that's embedded on the page still has the old hostname as the url.
This works internally (as it's the computer name) but I can't see the poster frame or the video externally.
Is there a file somewhere I can tinker with to change this?
Where is the value for this set?
Many thanks!

Thanks,
There was nothing for it but to rebuild the server, though it was quicker and less painful than I remember it being before.

Similar Messages

I am totally frustrated by the fact that now i have gone to iCloud and after a few synchs, my contacts are all mixed up with the wrong information. For instance, my email and phone number comes up under someone else's name (a thousand contacts)

I am totally frustrated by the fact that now i have gone to iCloud and after a few synchs, my contacts are all mixed up with the wrong information. For instance, my email and phone number comes up under someone else's name (a thousand contacts). I dont know how to repair this. what a nightmare

An icloud account is designed to be used by just one user. If you have given your ID or set up your account on someone else's device, then their data will be mingled with your or worse.

Cannot install a .dmg file. It is associated with the wrong file

Cannot install a .dmg file. It is associated with the wrong file and I don't know which is the right file.
Can anyone help?

That is a Disk Utility image. You can find Disk Utility in the Utilities folder inside the Applications folder on your hard drive.

I have 60 000 songs on a hard drive. The songs are referenced to the media file and not stored in the media file. I have moved the songs to another external drive. The itunes library has lost the link to the media files. How can I restore the links?

I have all my songs (60 000) on a remote drive. The drive is wireless networked. I installed a new router and had to map the drive again. Once this was done itunes could no longer locate the music. My music is not sitting in my media file but is rather referenced to the location of the music. Now that the location has changed due to the remapped drive how can I link the itunes library to the songs (media)again.
I have read many help comments and forums but so far nothing specific about relinking once the songs have already been moved and are referenced songs.
A step by step procedure would be helpful.
Thank you
Graham

I've uploaded a newer version that might catch that error. For some background on the script look at this thread.
iTunes remembers the location of each file in the database. If you right-click on a missing file, click Get Info, cancel when it asks you to try to find it, then look on the summary tab it will show you the last known location in the form file://localhost/<some path>. If you put the files back where they are expected to be, close iTunes and reopen, then iTunes will find them again. If not my script can attempt the task. When the script asks for a media folder you should respond with Z:\ since that seems to be where the artist folders are located.
tt2

HT1766 How can I backup the iPad to the non-C drive of the computer that runs the itune? I have already setup the library at a NAS and seems only media file are stored int he library. iPad backup still need to take use my C: drive that is running out o

How can I backup the iPad to the non-C drive of the computer that runs the itune? I have already setup the library at a NAS and seems only media file are stored int he library. iPad backup still need to take use my C: drive that is running out of space

Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
 Cheers, Tom

Metagen is skipped sometimes complaining because all output files are up-to-date with respect to the input files

Hi,
In one of my dll (VS2010), the process Skipping target "MetaGen" because all output files are up-to-date with respect to the input files.
it is at random. I have checked the time stamps of the dll and metagen.write.1.tlog both having the time stamp on the failed build. But all files in release folder did not have the same time. They are one hour earlier than the dll
and the metagen.write.1.tlog.
On the good build it said the input file is is newer than output file ".\Release\\metagen.write.1.tlog" and allfiles in the release folder have same time stamp.
Any clue to solve this ?
Regards,

Hi,
Based on your post, I am not very clear about your issue. I feel your issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Could you please provide us more information so that we resolve your issue better?
What type of project are you working with? C++ MFC project?
How was the
metagen.write.1.tlog file generated in your project?
What error messages did you get?
What is the 'input file'?
If possible, please provide us a sample project to reproduce your issue.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT4914 Are the older "Protected AAC files" that I have replaced with the unprotected version when I re-download them using Itunes Match?

Are the older "Protected AAC files" that I have replaced with the unprotected version when I re-download them using Itunes Match?

Additionally, when trouble shooting, and you disable iTunes Match on an iOS device you cannot simply re-enable it immediately. You must launch the Music app and let the content clear out before re-enabling the service.

Following Media Files Are Not Optimized For Final Cut Pro

I'm sure you've seen this before and I've tried to search for a thread on it here and fell asleep, so sorry if this is a repeat.
I have edited projects in Premiere Pro (on my PC) and I have tried to transfer them in FCP. It worked with the exception of two things:
1. the error message, "Following Media Files Are Not Optimized For Final Cut Pro"
2. the quality *****! watching it on the playback in FCP it looks great, but then when I burn it to Disc it's pixelated in spots and generally has a lower quality picture.
I know that it's Standard Def. and can't expect the best, but I've done it before (once or twice) and it didn't seem this bad.
Can someone suggest anything to help the quality? Should I run my AVIs through MPEG Steamclip to make it a QT file and if so what is the best format in that since there are many to choose from and most I'm not familiar with?
Thank you,
Crayton

I did compress them to DV NTSC then burned it to DVD and the result was no bueno.
I thought what I would do is try compressing them again before I send them on over to DVDSPRO. Here is a simplified break down of the situation:
- I have edited the raw footage in Premiere Pro on my PC. They were recorded and captured as SD.
- I rendered them in Premiere, then transfered the rendered AVI file to FCP.
- When went to place the files in FCP, I received the warning message; "Following Media Files Are Not Optimized For Final Cut Pro" but I went forward anyways and it allowed me to do so.
- Originally I went ahead and compressed them from FCP to QT Movie as a DV NTSC, which ended up poorly.
- Therefore my question is, should I compress them using another file type (other then DV NTSC)? Which leads me to another program that I have called MPEG Streamclip, which offers tons of file types of which I am unfamiliar with most. I want the best quality of course but don't know what file type is the highest going from AVI to a format that can be accepted by FCP and ultimately DVDSPRO. Keeping in mind that I only have FCP5 and do not have Prores.
Did that make sense?
Thank you again,
Crayton

Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?

Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?

wmv is a Windows Media format. I don't know why Realplayer is coming into it since that deals primarily with Real format files and maybe a few generic formats.
You need
Free Flip4mac QuickTime player components - http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
After installation a new Flip4Mac pane will appear in System Preferences. Make sure you set the boxes to ensure that it will play WMV files in Quicktime.
or play the files with VLC
VLC media player - http://www.videolan.org/vlc/ - general media player that plays just about anything.
While you're at it you might install:
Perian codecs for Quicktime - http://www.perian.org - plugins to add functionality to Quicktime for playing additional audio and video formats
Quicktime audio problems, Perian, VLC - http://discussions.apple.com/message.jspa?messageID=9013669 - read note about uninstalling prior DIVX support before installing Perian.
Perian doen't do WMV but it's handy to get many things to play in Quicktime.
Note, if these are protected WMV, nothing on a Mac will play those (unless you also have Windows installed).

Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users.

VSS Error: "An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly re-synchronized with the original volumes."

Hi all,
at a customer’s site I’ve a problem with a fresh installation of Backup Exec 2014. Every backup (full or incremental) always reports the following
error: “An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly re-synchronized with the original volumes.”.
It’s not a Backup Exec problem itself, also backups using “Windows Server Backup” failing with the same error.
On this site I have three servers; the error is only generated for one of them. Here’s a short overview:
Server1: Windows Server 2012 R2, latest patchlevel, physical machine, Domain Controller and Fileserver. Backup Exec is installed on this machine,
backup is written directly to SAS tape loader. There error is generated on this server.
Server2: Windows Server 2008 R2, latest patchlevel, virtual machine, running on Citrix Xen Server 6.2. Used for remote desktop services, no errors
on this server.
Server3: Windows Server 2012 R2, latest patchlevel, virtual machine, database server with some SQL Instances, no errors on this server.
As I said, error is reported only on server1, no matter if it is a full or an incremental backup. During the backup I found the following errors
is the event log (translated from a german system):
Event ID: 12293
Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider. "{89300202-3cec-4981-9171-19f59559e0f2}" an error occured. Routinedetails Error calling Query(). [0x80042302] [hr = 0x80042302, unexpected component error of
the Volume Shadow Copy Service.
Process:
Volume Shadow Copy polling
Volume Shadow Copy delete
Context:
   Executioncontext: Coordinator
   Executionkontext: Coordinator
And
Event ID: 8193
Volume Shadow Copy Service error: Unexpected error calling Routine "IVssCoordinator::Query" hr = 0x8004230f, Unexpected error Volume Shadow Copy Service Provider
Process:
Volume Shadow Copy delete
Context:
   Executioncontext: Coordinator
There are some articles about this error in the knowledge base or web which does not help or do not apply to my environment for example:
http://www.symantec.com/business/support/index?page=content&id=TECH38338&actp=search&viewlocale=en_US&searchid=1423724381707
What I already have tried:
Disabled Antivirus during the whole backup
Installed latest Service Pack for Backup Exec
Rebooted the server
vssadmin list writers do not show any errors
consult eventid.net for other possible solutions
no limits set for vaa
Anymore ideas from you guys?
Best regards,

Hi Shaon,
vssadmin list providers gave the following output:
vssadmin list providers
vssadmin 1.1 - Verwaltungsbefehlszeilenprogramm des Volumeschattenkopie-Dienstes
(C) Copyright 2001-2013 Microsoft Corp.
Anbietername: "Microsoft File Share Shadow Copy provider"
   Anbietertyp: Dateifreigabe
   Anbieterkennung: {89300202-3cec-4981-9171-19f59559e0f2}
   Version: 1.0.0.1
Anbietername: "Microsoft Software Shadow Copy provider 1.0"
   Anbietertyp: System
   Anbieterkennung: {b5946137-7b9f-4925-af80-51abd60b20d5}
   Version: 1.0.0.7
Unfortunately theres not Symantec VSS Provider listed.
Best regards,
Christoph

Png files are over each other in the iphoto import window

When i connect my iphone to the mac to import photos in iphoto, the png files are over each other in the iphoto import window. Jpegs are also showing up in the iphoto grid with new photos but each box contains 1 photo, which is normal. With png pictures, iphoto puts up to 3 pictures on top of each other in each box.
Anybody has seen this before?
Kind regards,
Jeff Dehaes

oops, sorry, re-installed iphoto and it works again, they weren't even png's just jpegs...
Problem solved.

Firefox downloads a file with the wrong file extension. How can I fix this?

The title says it all. When I download files, it comes out with the wrong extension, not sure what extension it comes out as.
It actually just comes out as "file."
How can I fix this? Is there something in about:config I can tweak to eliminate this error?

Hi dartz!
This type of problems are not related with the browser you are using, in this case, Firefox. This issues are the consequence of the way that the website "packed" the file.
What you should do is download the file, locate the file, give right click on the file and select "Rename". Now, don't change the name!!! Just add "." and then the extension that you wanted. Example, you download the file "norwegianwood", after renaming it, it should read "norwegianwood.srt".
Hope this works for you, take care!

"Clip's Media Files are Not Currently Available" Alert Message

I am making an video project for school and so I put the video clips (JPEG) into my iPhoto Library and I put them together as a project. A few days later I went back to work on the project and I'm getting an alert symbol on the video clips that says "This clips media files are not currently available" when I hover over it. Does anyone know why?
Also, I need to export the project as an AVI or MPEG file and when I click 'Export Using Quicktime' an error message pops up that says "Missing Media... The following Event used in this project is not currently available: iPhoto Videos - English Video Poetry Project - The portions of the project which reference this Event will show black frames." Is this because of the alert that says my media files are not available?
Thank you!

This happens if you either delete your original films or rename the event in iPhoto. If you deleted the original film, you're stuck. If you just renamed it in iPhoto, the fix is simple: quit iMovie, rename the album in iPhoto back to whatever it was (whatever it says in the error message - in your case "English Video Poetry Project") then open iMovie. It should now be ok, and while iMovie is open, you can rename your album (in iPhoto) to whatever you like.
Note: if you rename your album, iMovie will cope but won't automatically save the change, so it will break next time you load it. To fix that, make some small change to the movie. Exporting it might work, haven't tried.

Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

Media files are published to blog with the wrong hostname

Similar Messages

Maybe you are looking for