Media Files Sorted/Copied into new folder

I have a huge project and thousands of files I need to find all the media(quicktimes) of specific shots with the same shot/take lable and copy those files into a new folder so i can send them to someone else to edit with.

Highlight all the clips in the BROWSWER that you want to transfer and use the MEDIA MANAGER and the COPY option.
Shane

Similar Messages

  • FIle scenario error - file not copied to destination folder

    Hi,
    I am workin on sample file to file scenario.I am using transport protocol as FTP. I had made one system as ftp and placed 2 folders in it, sender and receiver ,wat i am tryin to do is,pick xi_inputfile.xml from sender folder and place it in destination folder.
    after completing the settings in IR and ID, whn i am looking in RWB message monitoring, its showing msg status as successful but in the interface it is showing exception.and file is nt copied into receiver folder
    I want to know how can I see what is that exception.
    Other thing is when I am going in detail of msg , in message content tab it is showing
    com.sap.aii.af.ra.ms.api.DeliveryException=Message failed by admin.
    Thanks.

    Reactivate the channel from ID.
    Refresh Adapter Engine cache (mode=full) then test by sending new message.
    For full CPACache refresh
    http://<hostname>:<port>/CPACache/refresh?mode=full
    hostname = where xi is installed
    port = 5<instance no.>00
    Check IR mapping is correct and Ur is having authorization with Basis Team. Unless , resend the message by basis id.

  • HT204022 How will i delete photos I have copied into a folder from my PC to my iphone that are not part of My Photo Stream?

    Good evening everyone I need your help. How will i remove photos in an album i have copied into a folder from my PC to my iphone that are not part of My Photo Stream? tnx
    cutebraveheart

    See  >  To delete photos from your device

  • How to copy contents of folder into new folder with Automator?

    What is the simplest, fastest Automator workflow to copy the contents of a folder into a new folder? And without using 3rd party actions.
    I have a template folder structure called .ProjectFolder (to keep it invisible) so I need to copy the contents of this folder into a new folder, preferably with the ability to name the new folder on the fly. I don't want to use 3rd party actions because this is something I then need to maintain. Thanks.

    957911 wrote:
    Oracle guru,
    I am looking for a before or after trigger statement that will copy existing values inserted in the previous row into columns A & B. Then insert those values in a new row into column A & B if null? Same table. Hopefully my question is clear enough.
    -Oracle 10g express
    -I have an existing " before insert trigger" that insert id and timestamps when a new row is created.
    -Table is composed of column like id,timestamps,A,B and more.
    Thanks in advance
    PierreI will call it a very Wrong design.
    It is a wrong Table Design. You are duplicating the data in table and not complying with the Database Normalization rules.
    How about Verifying if Column A & B are NULL before inserting and inserting another row and avoiding it in Triggers?
    If you are bent to achieve this, below code might be helpful. However, I would never go with this approach. If you would care about explaining the reason for going ahead with such a data model, people could suggest better alternative that might conform with Normalization rules.
    create or replace trigger trg_test_table
    after insert on test_table
    for each row
    declare
      pragma autonomous_transaction;
    begin
      if :new.col_a is null and :new.col_b is null then
        insert into test_table
        select 2, systimestamp, col_a, col_b
          from test_table
         where pk_col = (select max(pk_col) from test_table b where b.pk_col < :new.pk_col);
      end if;
      commit;
    end trg_test_table;Read SQL and PL/SQL FAQ and post the mentioned details.
    Do not forget to mention output from
    select * from v$version;

  • LOOOOOONG pauses in Windows Explorer with file copy, rename, new folder, etc.

    I am using Windows 7 64-bit pro and I am experiencing horribly long pauses in Windows Explorer on very simple file operations, such as renaming a file, copying a file, creating a new folder, etc. Here is an example:
    1. Open a folder in windows explorer, e.g. My Documents
    2. Select a file
    3. Hit F2 and enter a new name for the file, then hit ENTER to save the name
    4. Windows Explorer now shows the wait cursor and becomes completely unresponsive, sometimes for MINUTES.
    This is crazy. I read somewhere it may be due to shell extensions -- another post specifically called out MagicDisc, but I uninstalled that and still have the problem. After a fresh reboot the problem usually is not there immediately, but always comes back eventually.
    Anyone have any ideas?

    Hi Lex3001,
    I would like to confirm what are the results in Safe Mode and Clean Boot?
    I also would like to suggest you run ShellExView again and disable some shell extensions to check the issue.
    Run ShellExView
    =================
    1. Launch ShellExView again and scan the computer.
    2. Press "Ctrl" on the keyboard and click all items which are marked in pink in the list.
    3. Choose "File" then "Disable Selected Items".
    4. Quit and restart the computer to check the Windows Explorer issue again.
    Does it work?
    In addition, I also would like to suggest you create a new user account to check the result
    Regards,
    Arthur Li - MSFT

  • Preview Icons vanishing when dragged into new folder.

    When dragging an image file (with a preview icon showing the small representation of that image) is dragged from it's original folder to a new one, the preview disappears and is replaced with a generic "EPS" or "Jpeg" grey icon. Futher, if I get information about the file, the preview picture of the image also shows just a generic file type icon, even though I can see clearly the preview icon. This is so frustrating, as I must then batch process images in photoshop to have a new preview image show up.
    To make things even more annoying, the process is inconsistent. If I drag the a eps file from the original folder with the image preview into a new folder, the preview may be missing. If I drag and drag, creating multiple copies of the file in a new folder "hnuewf.eps 1, .2, .3 etc...) almost always one of these attempts will copy correctly, with the preview intact. What the heck is going on!

    Partilly solved by rebuilding permissions....

  • Searching for multiple files to put into same folder

    Hello,
    I have a group of folders each containing low resolution images. I would like to create a group of new folders with the exact folder organization with the exact files in each folder but the folders should contain the high resolution images. Currently the high resolution files are all mixed together in a few folders on my external hard drive.
    I'd like to simply open the low-resolution folders, do a select-All, and somehow use those file names in a mass search of the high res folders, but I'm not sure if it's possible or how to do it.
    I am using OS 10.4.11
    Any help would be appreciated.
    Message was edited by: ccumminskc

    O.K. I think i figured out a backdoor way to do this. I'm open to easier methods.
    This is 500 or so files I'm trying to organize so doing each one by one was not going to be good for my sanity.
    In the Finder I selected all the files in that low res image folder who's organization and contents I wanted to mimic in the new high res folder. I control clicked and did the "Copy All" item on the dialog.
    From there, I opened TextEdit, pasted the file names to a new text document. The list is a descending list with each file name separated by a line break (or "carriage return" they used to call them.) I carefully moused to the beginning of one file name and selected the space before the first letter of the file name and selected the empty space until the last letter of the previous file name. It should be nothing but blank space selected. I copied that, clicked "Find" on the TextEdit menu. I selected the Find space, put my cursor in there and pasted into the space. In the "Replace" space I type " or " and clicked "Replace All."
    This prepared a lengthy text section featuring all of the file names ready to be entered into a Boolean search. I used EasyFind from www.devon-technologies.com to do a boolean search of the high-resolution folders and Bingo, there they are ready to be put into their new home.
    Whew.... if anyone cares.... or has an easier method I am all ears.

  • Mail messages missing after copying to new folder

    I am recovering some email messages and have imported the mbox into a new folder. It contains 8860 messages.
    When I copy these messages to the inbox, about 750 messages do not copy over. There is no warning that the file copy is incomplete.
    Also If I try to export the mailbox, not all of the mail message are exported.
    It seems very difficult to find out what is causing the problem.
    I had already rebuilt the mailbox before attempting to copy it to the inbox folder.
    Anyone have any experience with mail messages going missing files after copying them to a new folder within mail?

    I am recovering some email messages and have imported the mbox into a new folder. It contains 8860 messages.
    When I copy these messages to the inbox, about 750 messages do not copy over. There is no warning that the file copy is incomplete.
    Also If I try to export the mailbox, not all of the mail message are exported.
    It seems very difficult to find out what is causing the problem.
    I had already rebuilt the mailbox before attempting to copy it to the inbox folder.
    Anyone have any experience with mail messages going missing files after copying them to a new folder within mail?

  • IPhoto 2011. Created an album from different cameras (different filenames), placed pics in order in album but want to export into new folder on desktop in same order. Can I number the pics within iPhoto to reflect that order, or simply export in order?

    iPhoto 2011. I have created an album from different cameras (different filenames), and placed pics in order in the iphoto album but want to export into a new folder on the desktop in that same order. Can I number the pics within iPhoto to reflect that order, or simply export in order? 
    Thanks!

    File -> Export, and note the options under File Name
    Another way:
    Here's one (of several) way(s) to do what you want:
    Make an Album of the photos, then drag the pics into your preferred order.
    Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
    Then File -> Export and in the Export dialogue set the Filename to "Use Title"
    Sort on Filename in the FInder and you end up with a folder full of images in the same order as the Album in iPhoto.

  • Procedure to move highlighted files en masse to new folder

    This procedure should be quite simple, but it escapes me!
    How can I move an entire group of highlighted files into a new folder?

    nkh wrote:
    Hi bd,
    This is the procedure I tried before pleading for help. Although the whole group of files is highlighted, the drag-drop routine only transfers the single file for the icon I drag. The others remain highlighted, but do not move as a group!
    Mouse control.
    Typically an inadvertent 2x click on the file name "deselects" the group and re-selects just the file you are pointing at when you click.
    But you know what you want to do, so your hand is already performing the drag/drop before your head registers that only one file is now selected.
    Happens to me on a semi-regular basis.
    After you have selected the group of files, (assuming list view) try pointing at the date/or time area, click and drag from there instead of the filename.

  • Automatically open files when dropped into a folder

    I have a folder which has a constant stream of images being dropped into it. Is it possible for Photoshop to automatically open recently added images of a certain folder, then save (as .psd) and close to a different location?
    It would be nice for Photoshop to do this overnight as new images are being dropped into the folder.

    As a start you could read this thread.
    http://www.ps-scripts.com/bb/viewtopic.php?t=1735&postdays=0&postorder=asc&start=0

  • Every time I save a file it creates a new folder

    Hi,
    weird problem, never occurred on other Macs. I have a preso and every time I save it I see an Expander application running which creates a new folder file. Let's say I have a preso called Effects.key, when I save it or in auto-save it creates Effects.key folder,   Effects.key folder 1,  Effects.key folder 2,  Effects.key folder 3......an on and on and on....
    What's happening ?
    Thanks in advance

    try this:
    right click on one of the original Keynote files, select;   get info
    in the Open With dropdown option; (if Keynote is not the listed), select other,
         then navigate to Keynote in the Applications folder
    select; always open with
    click add

  • Issues importing file with "copy into document option".

    I am running Framemaker 7.1.  I need to import a .jpg image into my document.  I selected File-Import-File and then selected the file and the "copy into document" option.  This placed the .jpg image into my document.  I saved the document and then closed it.  Then I moved the .jpg image file which I imported into the document to another location.  I then re-opened the document and I get the following message:
    "Missing File - Looking for ../xx.jpg".  I select the "Skip This File" option and then "Continue".  When I scroll down through the document to where I had previously imported the .jpg image and when I get to that page, I get the following message popup, "Cannot display some imported graphics.  The images will appear as gray boxes."  Once I select "OK" on the popup message, the image is displayed as normal.
    Could someone help explain to me how I can actually copy the image into the document without any reference to the original file pathname.
    Thanks.

    I was able to activate the hypertext.  When I click on the hypertext for the imported picture reference, the original document opens up but I don't see anything to indicate the imported reference.  The bottom line is that I want to delete the imported references since I don't want the references in the document. 
    Somewhere buried in the framemaker document are these two imported references and I want to remove them.  How do I do this?
    Keep in mind that when I click on the hypertext imported reference, it switches to the original document, but I don't see anything that indicates an imported reference so there is nothing for me to delete.
    Thank you.

  • Unable to move message into new folder in Mail 3.1

    Hi
    I just added a new folder in Mail, but cannot move a message from my inbox (IMAP) into it. I can move messages into other, older folders, but not into any folders I created today. This is happening with both local and IMAP folders created today.
    Any suggestions?
    Thanks!
    D

    Okay, here's what I find:
    My home directory: drwxr-xr-x+ owner=me
    ~/Library: drwx------+ owner=me
    ~/Library/Mail: drwx------ owner=me
    Continue to the local mailboxes:
    ~/Library/Mail/Mailboxes: drwx------ owner=me
    ~/Library/Mail/Mailboxes/(top-most level): drwx------ owner=me
    ~/Library/Mail/Mailboxes/(top-most)/(next level): drwx------ owner=me
    That gets us to the info I gave previously, which I already fixed using chown.
    If we continue to the +remote (IMAP)+ mailbox:
    ~/Library/Mail/(imap account): drwx------ owner=me
    ~/Library/Mail/(imap account)/INBOX: drwx------ owner=me
    And that again brings us to the level where the original problem was (and the individual directory that I have corrected using chown.)
    So I can fix each directory individually using chown, but I'd like to fix the cause.
    Thanks!

  • Rules are sorting all into one folder

    I was sorting mail into mailboxes (not smart mailboxes)
    hit select all and apply rules while in the inbox. Now all mail goes to one particular folder.
    How do I stop it doing that?
    TIA

    How do I stop it doing that?
    By disabling your rules or modifying them so that incoming mail isn’t moved to that folder.

Maybe you are looking for