Media Go failed to install,,,reports VisualC++2005 Redistributable Error 1935

Hullo,
I have just done a fresh install of Windows 7 Professional 64-Bit and the MediaGo application will not install Version 2.7.0.357 on my machine. (it was on the machine and operational before?)
Have done some research and found nothing that is completely relevant. Mostly relates to Windows XP, Windows Visa at Microsoft support, or here it relates to older versions of the MediaGo program.
I have tried to install manually the Visual C++2005 Redistributable (32-Bit and 64-Bit), even tried a later version of Visual C++2008 to no avail?
In the error window it states that the application has failed to install and redirects me to Microsoft knowledge base http://support.microsoft.com/kb/556085/ja as I mentioned before Windows XP and Windows Visa???
I have found a list of downloads but which one or which ONES do I need to install?
e.g.Latest Supported Visual C++ Downloads or is there somewhere that I could get hold of the previous version and try that to see if it is only the Version 2.7.0.357 that cannot load. If that old version installs then try geting it to update using the PC Companion,,,could work??
Thanks for reading

I found discussion on another forum about this error when installing Visual C++ and where COMPONENTS was also missing. In that thread it was suggested that you load it (COMPONENTS) from the file menu in regedit and from the file C:\Windows\System32\config\COMPONENTS but i really think that you should wait for a response from Microsoft or your PC support.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Error 1935 and the VisualC++2005 Redistributable

Hullo,
This is my post from the answers.microsoft.com forum where it has received no replies
Updated: - have contacted Microsoft support four times, of those four chat sessions three have been "Remote Control" sessions.
Problem still exists
Today I copied a file from another computer that I could not find anywhere to download called *vcredist2_x86.exe. After I executed the file from the desktop the error was similar to the one below (in the cut and paste from the other MS support forum)
Today's error window
[Error 1935. An error occurred during the installation of assembly 'policy.9.0.Microsoft.VC90.CRT,version="9.0.30729.6161",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type"win32-policy"'.Please refer
to Help and Support for more information. HRESULT: 0x8007371B.]
When I close this error report the redistributable "rolls back" and I have another window with a link to g0_microsoft.com/fwlink/?LinkId=119537
Can anyone shed some light on these problems (I am only a hobbyist but have invested quite a bit of my personal time trying to solve this?)
Thank you for reading
Nb:-Edit had to break all the links contained (Applies to:=>Windows=>Windows 7=>Programs) at htt#://answers.microsoft.com/en-us
First error window (original error)
Error 1935 An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80CRT ,type="win32-policy" ,version ="8.0.50727.6195",publicKeyToken ="1fc8b3b9a1e18e3b",processorArchitechture ="x86",Please
refer to Help and Support for more information.
Then this second window after pressing okay radio button
The VisualC++2005 Redistributable has failed to install. Please consult Microsoft knowledge base at http://http://support.microsoft.com/kb/556085/ja
This site is a Japanese Microsoft site and it is from 2008 which means it is for Windows XP and Windows Vista machines and Keywords: kbpubmvp kbpubtypecca kbhowto KB556085
The link on the Sony site Frequently Asked Questions (FAQs) the very bottom one, under the heading Troubleshooting. Is it possible that this problem, resembles the "Windows Update error 8000FFFF" , which was for Vista and required a registry Fix-It?
Nb:- Another issue that I had reason to contact Microsoft help desk about today, but alas the other fault I was enjoying (KB 2970228) has not made the program install even though it has been resolved.(smiling)
Thanks for reading

Hi
look here as well, might help you:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/7eafbc81-a024-4767-ae40-8bddd6848c11/windows-7-x64-c-redestributables-error-1935?forum=vssetup
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil

SCOM 2012 R2 Agent Issue: Error 25211.Failed to install performance counters.. Error Code: -2147024809

Hi All,
I'm trying to deploy SCOM 2012 R2 agent onto a domain controller and I get the following error "Product: Microsoft Monitoring Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.)."
I've installed the agent successfully onto 4 other domain controllers with out any issues.</p><p>The domain controllers are all VM's running on VMWare and are Windows Server 2012 R2.
I've rebuilt the Perfmon Counters based on this article: https://support.microsoft.com/en-us/kb/2554336?a=wsignin1.0
I've also enabled verbose logging on the msi installation:
InstallHSPerfCounters: Custom Action Data. C:\Program Files\Microsoft Monitoring Agent\Agent\
InstallHSPerfCounters: Installing agent perf counters.
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft Monitoring Agent\Agent\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft Monitoring Agent\Agent\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
Any help on this would be great.

Hi Stefan,
I've successfully installed the agent. The server needed a reboot after fixing the corrupt perfmon counters.
I know have a issue with the agent on the domain controller. It kkeeps on greying out and have used hslockdown to allow the local system access by using the following command.
HSLockdown.exe "ManagementGroupName" /A "NT AUTHORITY\Authenticated Users"
Further digging into the issue I see in the SCOM Management Server the following error "The entity servername is not heartbeating"
Written a SQL query to gather more information. SQL query I used is:
SELECT
ME.FullName,
HSO.StartDateTime AS OutageStartDateTime,
DATEDIFF (DD, hso.StartDateTime, GETDATE()) AS OutageDays,
HSO.ReasonCode,
DS.Name AS ReasonString
FROM vManagedEntity AS ME
INNER JOIN vHealthServiceOutage AS HSO ON HSO.ManagedEntityRowId = ME.ManagedEntityRowId
INNER JOIN vStringResource AS SR ON HSO.ReasonCode =
REPLACE(LEFT(SR.StringResourceSystemName, LEN(SR.StringResourceSystemName)
– CHARINDEX(‘.’, REVERSE(SR.StringResourceSystemName))), ‘System.Availability.StateData.Reasons.’, ”)
INNER JOIN vDisplayString AS DS ON DS.ElementGuid = SR.StringResourceGuid
WHERE (SR.StringResourceSystemName LIKE ‘System.Availability.StateData.Reasons.[0-9]%’)
AND DS.LanguageCode = ‘ENU’
AND ME.FullName like ‘%SERVER NAME%’ –Change name here or leave %% for ALL SERVERS
ORDER BY OutageStartDateTime
This gives me the following reason behind the failure : "The heartbeat from System Center Management Service is missing."
Have I missed anything? The agent is running fine, however SCOM is reporting that the heartbeat is missing.
Any help on this would be great.

Windows failed to install the following update with error 0x80070005

Hi,
We are using Win Server 2008 R2 std. Server and Win 7 Professional X64 clients. During the second batch of update we got an Error while updating on one client machine and the system restoring back automatically However other clients are updating and working
fine. Then i tried to install the updates one by one manually then successfully installed all the updates except one ie. KB2862330. It keeps failing then i found an article suggest to check the update with Admin Previlage, disable Antivirus and Scan the
computer for Malware (Using MS Security Scanner and Malwarebytes). I tried both but never works. After that i got 2 batch of updates, everything is updating and trying to update this (KB2862330) and failing till date. What is the issue and why its not updating
on one machine?
Installation Failure: Windows failed to install the following update with error 0x80070005: Security Update for Windows 7 for x64-based Systems (KB2862330).
KB Article Followed : http://support.microsoft.com/kb/968003/en-us

Okay, good. The SURT shows no errors.
So now we can blame the problem exclusively on the update itself.
And yes... there are still known, ongoing issues with KB2862330.
Truly, my suggestion is to just not install it at all. Unless you've identified a known risk via a USB vector on particular systems where the vulnerability would be considered a critical risk, I'd say that the risk caused by the vulnerability is significantly
less than the risk of additional headache caused by the update itself. I have still not deployed MS13-081 to any of my systems, and frankly, I don't plan to.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

Upgrade to SCOM 2012 Agent - 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameters is incorrect)

I have seen this behavior on multiple servers. I receive this error when upgrading from a 2007 Agent to SCOM 2012.
Event ID: 10005
Product: System Center 2012 - Operations Manager Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.).
Event ID: 1008
The Open Procedure for service "HealthService" in DLL "C:\Program Files\System Center Operations Manager 2007\HealthServicePerformance.dll" failed. Performance data for this service will not be available. The Status code returned is the
first DWORD in the attached data.
Any idea why I receive this error?
Thanks
Mike

Hi,
Please refer to this article:
SCOM 2012 – Unable to upgrade agent after upgrade from SCOM 2007
http://www.phits.nl/wordpress/2013/02/01/scom-2012-unable-to-update-agent-after-upgrade-from-scom-2007/
Alex Zhao
TechNet Community Support

When I try to install PSE11, I keep getting error 1935, does anyone have a solution for this problem

When I try to install PSE11, I keep getting error 1935, does anyone have a solution for
this problem?

This thread from the Premiere Elements forum may help:
http://forums.adobe.com/thread/1286807?tstart=0

Desktop Manager 5.0 / Roxio Media Manager Fail to Install

I am getting error 1904 module when trying to install Desktop Manager 5.0 (see errors below). I am the administrator on this laptop (hpdv8130us).
I have tried the solution where you create a reset.cmd via notepad. Result was the same.
Also, I tried a clean installation and still receive the same errors.
If I hit okay to the errors the next step is that it tries to install Roxio Media Manager and that hangs after the progress bar is complete (I let it sit for 4 hours). When I go to cancel Roxio Media Manger, it also hangs there as well. The only to get past this screen was to enter task manager and end the "dumprep.exe" process. While this gets me past the hangs/freezes, when I start DM5 it works but when I go to start Media Manager, it opens but doesn't load, the computer still runs albeit slowly because Roxio is now using 85-95% of system resources.
Running Windows XP with the latest service pack.
These are the errors I receive when trying to install Desktop Manager 5.0
error 1904.module C:\program files\research in motion\blackberry\is71connectors\isgroupwise6.5.x\gw.dll failed to register. hresult -2147220473. contact your support personnel.
error 1904.module C:\program files\research in motion\blackberry\is71connectors\isgroupwise6.5.x\gwapi.dll failed to register. hresult -2147220473. contact your support personnel.
error 1904.module C:\program files\research in motion\blackberry\is71connectors\isgroupwise6.5.x\desktopsetup_pd.dll failed to register. hresult -2147220473. contact your support personnel.
error 1904.module C:\program files\research in motion\blackberry\is71connectors\isgroupwise6.5.x\syncae_pb.dll failed to register. hresult -2147220473.
contact your support personnel.
Message Edited by qwick on 07-27-2009 05:21 AM
Message Edited by qwick on 07-27-2009 07:22 AM

Hello qwick and welcome to the forums!
It sounds to me like the installer is having trouble registering some required dlls. This article might help you out with this issue.
Also, do you know if you already have any Roxio Media Managers installed on your computer? Did you have a previous version of BlackBerry Desktop Manager installed and if so, did you uninstall it before installing this new one or install the new one without uninstalling the previous version?
hope to hear from you soon
-tg
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Fail in installing Visual Studio 2005 Professional Edition in Windows 7

Hi,
I'm new in here. I've just got my Notebook Installed with WIndows 7 Enterprise 32 bit and I would like to install Visual Studio 2005 professional Edition(I've got the installer CD from the MSDN which is purchased in our Company) in my
notebook. There is an issue which often occured, it says:
A problem has been encountered while loading the setup components. Canceling Setup.
I've look up for the solution try lot of things to resolve the issue but no luck until now.
Any idea or experience to help me?
Thanks in advance for the help.

I also add you the log from dd_vserror80.txt :
[09/19/11,17:19:17] MSITOSIT: [2] CRootComponent::SetManager() - MsiGetActiveDatabase returned an invalid handle
[09/19/11,17:19:17] MSITOSIT: [2] ERROR processed; exception was thrown for retail build
Developer Comment: MsiGetActiveDatabase returned an invalid handle
Build Time: Thu Dec 11 15:04:18 2003
DWORD: 0
[09/19/11,17:19:17] setup.exe: [2] ISetupModule::SetManager() failed in ISetupManager::LoadSetupObjectGuid() : vs_setup.dll
[09/19/11,17:19:18] setup.exe: [2] CSetupManager::LoadSetupObjectname() - Failed in call to LoadSetupObjectGuid() for strName: in file: vs_setup.dll
[09/19/11,17:19:18] setup.exe: [0] LoadComponent(), LoadSetupObjectName failure: vs_setup.dll
[09/19/11,17:19:18] setup.exe: [0] LoadComponent failed in ISetupManager::LoadComponentsFromDBObject(): vs_setup.dll
[09/19/11,17:19:18] setup.exe: [2] CSetupManager::LoadDatabaseValues() - Failed in call to LoadComponentsFroMDBObjects()
[09/19/11,17:19:18] setup.exe: [2] CSetupManager::RunIntro() - Failed to Load Database Values
[09/19/11,17:19:50] setup.exe: [2] CSetupManager::RunLoadSetup() - Failed to Run the Intro
the log from dd_vsinstall80.txt :
[09/19/11,17:19:06] Setup.exe:
[09/19/11,17:19:06] Setup.exe: ========== Logging started ==========
[09/19/11,17:19:06] Setup.exe: =====================================
[09/19/11,17:19:06] Setup.exe: GetGlobalCustomProperty({481CEF9F-033A-11D3-ACE2-00C04F8EEBA1})
[09/19/11,17:19:06] Setup.exe: GetGlobalCustomProperty(B51015E7-26A5-4c8f-B871-26ABA9BEFB65)
[09/19/11,17:19:06] Setup.exe: Command line parameters: /LAUNCHER="C:\Users\M162601\AppData\Local\Temp\" /HWND="2821506" /NoExclude
[09/19/11,17:19:06] Setup.exe: entering ISetupManager::RunIntro()
[09/19/11,17:19:06] Setup.exe: LoadSetupDatabase()
[09/19/11,17:19:06] Setup.exe: CSetupManager::LoadSetupDatabase() - set InstalledFrom property to D:\setup
[09/19/11,17:19:06] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:06] Setup.exe: CSetupManager::LoadSuiteInfo() - we are in SP mode - no suiteinfo.dll is supported
[09/19/11,17:19:06] Setup.exe: Product Name:Microsoft Visual Studio 2005
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : LoadSuiteRequirements
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : CheckSuiteBlocks
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : LoadCommandLineMgr
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::LoadCommandLineMgr() completed
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : LoadSetupLog
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::LoadSetupLog() completed
[09/19/11,17:19:06] UTILS::RunNGENAction: Started
[09/19/11,17:19:06] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue pause"
[09/19/11,17:19:07] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:07] Setup.exe: ISetupManager::RunIntro() : LoadManagers
[09/19/11,17:19:07] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:07] Setup.exe: inside ISetupManager::LoadUIManager()
[09/19/11,17:19:07] vs70uimgr: Entering InitializeModule() method.
[09/19/11,17:19:07] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:07] Setup.exe: CSetupManager::CopyTempFiles() - Installing setup files...
[09/19/11,17:19:07] Setup.exe: CSetupManager::InstallSetupFiles() starting
[09/19/11,17:19:07] Setup.exe: GetGlobalCustomProperty({39E467CB-8962-4AD8-99F9-864AFF183FD4})
[09/19/11,17:19:07] vs70uimgr: Entering ShowSmallProgress() method.
[09/19/11,17:19:13] Setup.exe: CSetupManager::CopyTempFiles() - Successfuly copied files to temp; rerunning Setup...
[09/19/11,17:19:14] Setup.exe: CSetupManager::CopyTempFiles() - Finished Rerunning Setup...
[09/19/11,17:19:14] Setup.exe: UnloadSuiteComponents()
[09/19/11,17:19:14] UTILS::RunNGENAction: Started
[09/19/11,17:19:14] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue continue"
[09/19/11,17:19:14] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty(AA4EEF91-FB37-4135-9B73-484B75DDAA42)
[09/19/11,17:19:14] Setup.exe:
[09/19/11,17:19:14] Setup.exe: ========== Logging started ==========
[09/19/11,17:19:14] Setup.exe: =====================================
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty({481CEF9F-033A-11D3-ACE2-00C04F8EEBA1})
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty(B51015E7-26A5-4c8f-B871-26ABA9BEFB65)
[09/19/11,17:19:14] Setup.exe: Command line parameters: /LAUNCHER="C:\Users\M162601\AppData\Local\Temp\" /HWND="2821506" /NoExclude /CreatedTemp /NoExclude /InstalledFrom D:\setup
[09/19/11,17:19:14] Setup.exe: entering ISetupManager::RunIntro()
[09/19/11,17:19:14] Setup.exe: LoadSetupDatabase()
[09/19/11,17:19:14] Setup.exe: CSetupManager::LoadSetupDatabase() - set InstalledFrom property to C:\Users\M162601\AppData\Local\Temp\SIT41797.tmp
[09/19/11,17:19:14] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:14] Setup.exe: CSetupManager::LoadSuiteInfo() - we are in SP mode - no suiteinfo.dll is supported
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty({1B3F6DC3-205F-11D3-A824-00C04FB1799F})
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty({383F0141-C682-4665-A69B-756E719C968D})
[09/19/11,17:19:14] Setup.exe: Product Name:Microsoft Visual Studio 2005
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Initializing Progress Dialog Thread
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Waiting for Initialization event...
[09/19/11,17:19:14] Setup.exe: CCoreEngine-Proc() - Setting loading init Event...
[09/19/11,17:19:14] Setup.exe: CCoreEngine-Proc() - Finished Setting loading init Event
[09/19/11,17:19:14] Setup.exe: CCoreEngine-Proc() - Entering Main Message Loop...
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Finished Waiting for Initialization event
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Initializing Progress Bar
[09/19/11,17:19:14] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : LoadSuiteRequirements
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : CheckSuiteBlocks
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : LoadCommandLineMgr
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::LoadCommandLineMgr() completed
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : LoadSetupLog
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::LoadSetupLog() completed
[09/19/11,17:19:14] UTILS::RunNGENAction: Started
[09/19/11,17:19:14] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue pause"
[09/19/11,17:19:15] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:15] Setup.exe: ISetupManager::RunIntro() : LoadManagers
[09/19/11,17:19:15] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadDependencyMgr()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadCDInfoMgr()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadDiskInfoMgr()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadUIManager()
[09/19/11,17:19:15] vs70uimgr: Entering InitializeModule() method.
[09/19/11,17:19:15] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:15] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:15] Setup.exe: ISetupManager::RunIntro() : LoadDatabaseValues
[09/19/11,17:19:15] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({2C320A80-183E-4F7E-8832-66A0F5756221})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({8297A38B-6431-4F1D-9F6E-C3D371CEA383})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({B8A13F14-4BDE-4EC4-A53C-8E51FBB8261F})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({AA62DF98-3F2C-11D3-887B-00C04F8ECDD6})
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({8297A38B-6431-4F1D-9F6E-C3D371CEA383})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({E0875D42-A33D-4C64-81C9-167795F29CA4})
[09/19/11,17:19:15] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] MSITOSIT: ***ERRORLOG EVENT*** : CRootComponent::SetManager() - MsiGetActiveDatabase returned an invalid handle
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] MSITOSIT: ***ERRORLOG EVENT*** : ERROR processed; exception was thrown for retail build
Developer Comment: MsiGetActiveDatabase returned an invalid handle
Build Time: Thu Dec 11 15:04:18 2003
DWORD: 0
[09/19/11,17:19:17] Setup.exe: GetCustomProperties()
[09/19/11,17:19:17] Setup.exe: get_CustomProperties()
[09/19/11,17:19:17] Setup.exe: GetGlobalCustomProperty({8297A38B-6431-4F1D-9F6E-C3D371CEA383})
[09/19/11,17:19:17] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] setup.exe: ***ERRORLOG EVENT*** : ISetupModule::SetManager() failed in ISetupManager::LoadSetupObjectGuid() : vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::LoadSetupObjectname() - Failed in call to LoadSetupObjectGuid() for strName: in file: vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : LoadComponent(), LoadSetupObjectName failure: vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : LoadComponent failed in ISetupManager::LoadComponentsFromDBObject(): vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::LoadDatabaseValues() - Failed in call to LoadComponentsFroMDBObjects()
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::RunIntro() - Failed to Load Database Values
[09/19/11,17:19:18] vs70uimgr: Entering DisplayMessage() method.
[09/19/11,17:19:18] vs70uimgr: DisplayMessage_START:A problem has been encountered while loading the setup components. Canceling setup.
[09/19/11,17:19:18] Setup.exe: CCoreEngine-Proc() - Finished Main Message Loop
[09/19/11,17:19:50] vs70uimgr: DisplayMessage_END:A problem has been encountered while loading the setup components. Canceling setup.
[09/19/11,17:19:50] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:50] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::RunLoadSetup() - Failed to Run the Intro
[09/19/11,17:19:50] Setup.exe: UnloadSuiteComponents()
[09/19/11,17:19:50] UTILS::RunNGENAction: Started
[09/19/11,17:19:50] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue continue"
[09/19/11,17:19:51] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:51] Setup.exe: GetGlobalCustomProperty(AA4EEF91-FB37-4135-9B73-484B75DDAA42)
Kindly to help me. I've done many things including the advice which is refer to:
http://social.msdn.microsoft.com/Forums/en/vssetup/thread/ebe334d3-c1ab-44ce-a449-b65940dac589
No luck at all..

Photoshop, Illustrator, Premiere Pro, Media Encoder - Failed to install/update

They all failed to install or update to 2014 versions.
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at "C:\Users\DANIEL~1\AppDat
I just joined the Cloud today and really want to get started today as well, but they are failing and i need help to fix them.

MoarDan it appears your Visual C++ 2012 Redistributable package needs to be reinstalled. You may want to reinstall this necessary component of your Windows operating system at Latest Supported Visual C++ Downloads.

Microsoft Visual C++ 2005 Redistributable Error during install

I am trying to upgrade a Office 2000 installation to Office 2007. The install keeps failing with an error 1704 saying that the installation of the Microsoft Visual C++ 2005 Redistributable has been suspended and that I have to rollback the changes.
How do I do this?
Any thoughts would be helpful.
Thank you,

I've got the same problem.

Installing Premiere 12 and received ERROR 1935

Install of Preimere 12 on Windows 8 failed with ERROR 1935 .Tried ADOBE suggested fix deleting 2 pda..... files from COMMON FILES.
Fix did not work. Received the same error when trying to install Pinnacle Atudio.
Community, please help me. thanks
Frank.

start here, http://support.microsoft.com/kb/970652

Installing Lightroom 4.1 updates - Error 1935

Installing the latest lightroom 4.1 64-bit update and getting:
Error 1935. An error occured during the installation of assemply component... blah.
Any ideas?

I would recommend trying the steps listed in Error 1935 | Assembly component Microsoft.VC80.CRT | Install | CS4, CS5, CS5.5 products | Windows - http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html. Please feel free to respond to this thread if you have any questions regarding the steps listed within the document.

Cannot install acrobat standard, i get error 1935

I am trying to download acrobat. I have windows. And when it gets to about 75%, an error 1935 comes up and it will not finish? Can someone help

Hi carak2746519
Please refer this Link (Error 1935 | Install | Acrobat, Reader | Windows ) , follow the detailed procedure, and let me know if it works for you.
Regards,
Rahul

Media Go failed to install,,,reports VisualC++2005 Redistributable Error 1935

Similar Messages

Maybe you are looking for