Media Go Installation/Upgrade Issues

A user of Media Go since day one, I was informed that there was an upgrade (version 1.7) and preceeded to install it... Unfortunately, The installation failed.
According to the Media Go installation (in a dialog box):
There was an error during the installation.
Could not access network location \\STORA\ FamilyLibrary\Desktop\.
Would you like to submit additional error information?
In the main installation window in the background, one can see:
There was an error during the installation.
Could not access network location \\STORA\FamilyLibrary\Desktop\.
There was an error during the installation.
Could not access network location \\STORA\FamilyLibrary\Desktop\.
One or more features could not be installed. The installation has been stopped.
Click Cancel to exit.
After a lot of mucking around, I un-installed Media Go and attempted to install both versions 1.5 and version 1.6, however I received the same error message both times.
For those that are aware of NETGEAR's Stora products, users must login to a Notification Area (system tray) application called "Stora Agent" , and also login to the network resource via Explorer - I have done this and the folders mentioned above (\\STORA\FamilyLibrary\Desktop\) are available to all applications... Further to this, Media Go was able to access this folder without issue prior to the update/re-installation.
Any ideas?

It seems that Media Go is not able to gain access to the folder.
What if the folder (drive) were not log in protected during install? Maybe that could be a possible solution. As I understand, there is no problem for you to install Media Go on a local drive?
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Another Media Processor 8100 Upgrade Issue

Hi,
A few days ago I posted here about a problem upgrading a Media Processor 8100 (from 6.2.1 to 6.2.4). I was able to solve my problem, but now I've encountered a different problem upgrading a second 8100 box.
After I ran the upgrade through the web gui, the webserver refused to display any page. So I RDP'd onto the desktop of the box, copied in the upgrade exe file, and ran it directly from the command line. This appeared to work OK (the logfile ended with 'Log Closed') but after reboot I'm getting the following error, when I try to access the web gui:
Compiler Error Message:
CS0103: The name 'InletPage' does not exist in the current context
Source Error:
Line 31:     {
Line 32:       // Code that runs when a new session is started
Line 33:       this.Session.Timeout = InletPage.PageTimeoutInterval;
Line 34:     }
Line 35:
I've rerun this procedure a few times, and there's been a few reboots, but no improvement. Logfile from latest upgrade attempt, is attached.
Thanks.
Eanna

Eanna,
Thank you for the logs, at this point I think we need to open a service request. Please see the below links and numbers.
http://www.cisco.com/cisco/web/support/index.html
The TAC CIN can be reached at:
USA North America +1 866 787 3866
USA Non-Domestic   +1 408 526 7209
Asia-Pacific                 +61 2 9935 4107
Australia                     +1 800 805 227
Europe                        +32 2 704 5555
UK                                +44 800 960 547
Regards,
Justin Lewis

Media Processor 8100 Upgrade Issue

Hi,
I'm attempting a firmware upgrade on a Media Processor 8100 (from 6.2.1 to 6.2.4). Unfortunately it seems to have failed. When I try to access the web gui (https://x.x.x.x/encadmin) it brings me straight into the recovery page, with a message "InletEncoder is not accessible. Restart Encoding Service 1." and the only thing I can do on this page is press the Reboot button. Several reboots have not improved the situation.
I can also RDP to the Windows desktop on the 8100. Anybody know if there's a way to recover this box? Can I copy the InletSpinnakerUpdate.exe directly to the desktop and run it locally?
Thanks.
ES

Hello Eanna,
The upgrade didn't complete successfully, there is a swupdate file in the
C:\inetpub\wwwroot\encadmin\updates directory that you can view with notepad. If you go to the end of that file and look for a log closed statement this will help confirm the upgrade. If you run it from the remote desktop this file will not generate. Please attempt to run the upgrade again from the remote desktop web gui first before running the .exe from the desktop to generate this log..
Thanks,
Rodney

Help me cure my installation upgrade issues -- itunes doesn't work!

After installing the update (6) of iTunes, all I was getting was the brief flash of the program that others described. I have read through the various postings and have tried...
the various cures, such as deleting files and deleting Norton (even though I have anti virus, not Internet security), checking the task manager, deleting the SC Info.sidb file, I tried installing Quick Time indepedent from iTunes, I tried installing an older version (4) of itunes after deleting qt and itunes, and now that doesn't work.
Any ideas would be most appreciated!

Thanks for your suggestions, but somehow I fixed it. After all of the failures to successfully install it, and deleting all prior and current versions, and deleting Norton Anti Virus, and checking the task manager, and looking at the msconfig... I then downloaded version 6 with explore, instead of netscape, and instead of saving it to the hard drive, I just elected to open the program. And... it worked! I have no idea if this is going to work for anyone else, but after 3 days of tinkering, this is the only thing that worked for me.

CCM 3.3.3 media for an Upgrade to 4.1

Need CCM 3.3.3 media for an Upgrade to 4.1 from which ftp site I can find these old media.

Thanks. I found Release Notes, failure is due to bug id:CSCee81635 it is failing on 3.3.5 and 4.1 as well. I will use the
Cisco Password utility to correct the problem.
Upgrade of Callmanager from 3.3(3) to 3.3(4) fails when using ~, %, or @ in
Directory Manager password. Error is "Failure occured during the Cisco
Directory
installation. Please look at the Cisco CallManager installation log files for
details.
Aborting Cisco CallManager install."
The integratedsetup.trc file contains the following
Error : Execution of "C:\dcdsrvr\perl\scripts\avvid_upgrade.pl". Refer
C:\dcdsrvr\log\avvid_upgrade.error.
[18:22:50] Completed
Populate ciscoatUserProfileString
- Done; skipped
Setting the environment variable PERLLIB..
IntegratedInstall aborted due to failure in configuration of Directory.
Install is aborted/cancelled...
Workaround
Change the Directory Manager password so that it does not include special
characters.

Frustrating Phone Upgrade issue

We need help with phone upgrade issue we encounter when BestBuy associate process our upgrade. Associate is saying we are not eligible but we have not done any phone upgrade since Jan 2011. Our ATT mobile service was established with BB in 2009 and we only upgraded 2 phones in Jan 2011 thru BB. The only recent change in January 2013 was a change of responsibility between my spouse and me since my company has a better employer discount thru ATT. No change and per ATT, no contract and we should be able to upgrade in any retail store. But BB keeps telling us we have issue with ATT and can do our upgrade only with ATT Corporate Store. Our mobile account is a regular family plan account as originally established with BB and just like any BB customer, have employer's discount attached. I don't understand how BB system communicates with ATT system so it is hard for me to explain to ATT what "error message" BB associate is receiving. It has become so frustrating with BestBuy telling us to check with ATT and then for ATT to tell us that there is no issue at their end. We have been a loyal BB customer with all major appliances bought from them including protection plan. The least they can do is work with their ATT representative to figure out between themselves what the issue is. Here we are willing to give both companies our business with new phones and new contracts and no one can help us out.

LTGee -
I am very sorry to hear about this. I am going to send you a Private Message to collect some information from you to see if we can get to the bottom of this. To check your private messages, ensure you are logged into the forum and click on the envelope on the upper right hand side of the forum.
Thanks!
Jesus|Senior Social Media Specialist | Best Buy® Corporate
Private Message

AW: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

Hallo
Sehen Sie in der Anlage.
Alles ist original.
Ich möchte jetzt eine kostenlose Fehlerbeseitigung.
Oder geben Sie mir eine kostenloses Update.
Ich habe ein Anrecht darauf.
Beste Grüße
Werner Göbel
Mobil: +41 (0) 79 559 83 21
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Bill@VT
Gesendet: Mittwoch, 27. August 2014 16:16
An: Werner Göbel
Betreff: Update von Acrobat 8.0 auf 8.3
Update von Acrobat 8.0 auf 8.3
created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6678331#6678331>
How did you purchase? AA8 has not been available for almost 8 yrs or so. The only current version available from Adobe is 11 and you can not upgrade from 7 to 11, but have to buy the full product.
Updates also require the use of the S/N of the qualifying product (AA7 in your case) to be able to use the newer product. So at this point, it is unclear what you actually have.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6678331#6678331
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

< This thread has been answered a duplicate of Update von Acrobat 8.0 auf 8.3 >

WG: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

Hallo
Ich bin ein korrekter Mensch.
Sie sehen in der Anlage, dieser Mail, das ich das Produkt ehrlich gekauft habe.
Ich verwende nur original Software.
Die Acrobat Version 8.0, war immer sehr gut für mich.
Diese Version reichte für mich vollkommen aus.
Ich hatte einen Computerabsturz und musste Acrobat auch neu installieren.
Die Acrobat Version 8.0, ohne Update, stürzt immer ab.
Das können Sie auch im Internet lesen.
Jeder weiß das, dass Acrobat Version 8.0, ohne Update abstürzt.
Es gibt aber dies Update nicht mehr zum Download.
Ich erwarte jetzt von Adobe, kostenlose Abhilfe.
Ich möchte jetzt eine kostenlose Fehlerbeseitigung.
Oder geben Sie mir ein kostenloses Update auf die neue Version.
Ich habe ein Anrecht darauf, dass Sie mir kostenlosen Ersatz liefern.
Beste Grüße
Werner Göbel
Mobil: +41 (0) 79 559 83 21
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Bill@VT
Gesendet: Mittwoch, 27. August 2014 16:16
An: Werner Göbel
Betreff: Update von Acrobat 8.0 auf 8.3
Update von Acrobat 8.0 auf 8.3
created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6678331#6678331>
How did you purchase? AA8 has not been available for almost 8 yrs or so. The only current version available from Adobe is 11 and you can not upgrade from 7 to 11, but have to buy the full product.
Updates also require the use of the S/N of the qualifying product (AA7 in your case) to be able to use the newer product. So at this point, it is unclear what you actually have.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6678331#6678331
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I was not trying to imply that you improperly purchased the product, but that the source may have been a rip off and that could be the problem. From what I can see, it appears that you were able to install Acrobat, but can not do the updates. In that case, try the updates from the ftp site. I will have to come back with the address that I do not have on this machine. The html updates are no longer available for some reason, but the ftp site contains all the updates. You do have to install the updates in order in general, though you only have to reboot after the last update. I will change computers and find the ftp link to provide you.
The ftp site is: ftp://ftp.adobe.com/pub/adobe/acrobat/.

Upgrade issues OBIEE 10g to 11g along with OBIA upgrade

Hi,
I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
1. OBIEE 10g to 11g upgrade issues??
2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
3. Informatica 8.6.1 to 9.0.1 upgrade issues??
4. DAC upgrade issues??
any response for my questions is appreciated.
Thanks
Jay.
Edited by: Jay on Apr 11, 2012 9:11 AM

HI Jay,
We cannot explained thread list here, If you get any errors plz post me,will try to help out.
This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
Award points it is useful.
Thanks,
satya

Report generation toolkit upgrade issues

I have created multiple vi's in that utilize the previous report generation toolkits specifically using the Generate Report Get Data to Modify.vi and the Generate Report Set Modified Data.vi. Obviously the report reference has now changed in 8.6's version of the report generation toolkit and these vi's do not exist in the 8.6 library anymore. What vi's do I need to replace these functions with to make this code work. Can anyone tell me what the work around is to solving this problem. This is a picture of the code.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor
Attachments:
code.JPG ‏92 KB

Hi BJD1613,
The Report Generation VIs on the LabVIEW Palettes mutate properly. However, you may run into upgrade issues if VIs distributed with LabVIEW, but not available in the Palettes are used in the code. Hence, I would caution against using them for the same reason.
In this case, the specific references do exist in the report generation classes; however, since they are private, they cannot be accessed by VIs outside the respective classes. A temporary workaround for now is mentioned in the following KB 4OOCSJ4M Getting References in Report Generation Toolkit 1.1.3 with LabVIEW 8.6.
This was reported to R&D (CAR# 123064) for further investigation

EHP Upgrade Issue - Java Stack

Hi,
Our Source System at NW 7.0 SP13 and we are upgrading the system to EHP1 SP03.
Upgrade failed at Downtime > DEPLOY_ONLINE_DEPL phase.
Error log:
Sep 9, 2009 10:11:51 PM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Sep 9, 2009 10:11:51 PM [Error]:             com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Deployment of queue sapjup-queue completed with error
JSPM version is 7.01.3.0.15. Current JSPM log directory is /usr/sap/XPD/JC00/j2ee/JSPM/log/log_2009_09_09_16_09_42.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:698) [Thread[main,5,main]]: The deployment of the queue failed.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.deploy.SAPJupJSPMDeployer.deployList(SAPJupJSPMDeployer.java:68) [Thread[main,5,main]]: Could not execute deployment of stack file /usr/sap/trans/EPS/in/XPD.xml.
Sep 9, 2009 10:11:51 PM [Error]:      com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.execute(PhaseTypeDeploymentManager.java:519) [Thread[main,5,main]]: Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been completed.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2009/09/09 22:09:42.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2009/09/09 22:11:51.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:02:08.248.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
I went through the following link , proceeded with option 2, But still getting same error.
Portal Upgrade Issue
Please advise the resolution for the issue I have.
Thanks in advance
Regards
Srinivas
Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM
Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM

Issue resolved

Upgrade issues list needed

Hi,
We're currently on 4.6b and going to upgrade to ECC6 with unicode I'm trying to compile a list point taken care converting to unicode from ABAP technical point of view. Does anyone have such a list?
Some points i shortlisted are :
1) Use GUI_UPLOAD and GUI_DOWNLOAD rather than WS_UPLOAD and WS_DOWNLOAD.
2) Structures or table headers that contain non-character data need to be identical when moving, comparing, selecting into, updating from, etc.
3) OPEN DATASET filename IN TEXT MODE FOR INPUT ENCODING DEFAULT.
I know there are others. Any help would be appreciated.
aRs

Check the below links
http://www.sapfans.com/forums/viewtopic.php?t=268386&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=263434&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=261051&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=253316&highlight=upgrade+issues

Errors in Forte 3.5 -Upgrade issue

hello ,
We are having a frequent disruption in the communication SO which has an
externalConnection Class. Did anything change in 3.5? We did not have
these errors in 3L!
After these erros, we have a mutex locking problem which leaves our
application hanging.
Any help will be greatly appreciated!
thanks
suma
Here is an Excerpt of the log file
Task 9: extConn4030a808.Write: 194 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
Task 9: extConn4030a808.Write: 233 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:47
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:47
regards,
Suma Venkatesh

-----Original Message-----
From: Venkatesh, Suma
Sent: Thursday, May 24, 2001 2:39 PM
To: '[email protected]'
Subject: Errors in Forte 3.5 -Upgrade issue
hello ,
We are having a frequent disruption in the communication SO which has an
externalConnection Class. Did anything change in 3.5? We did not have
these errors in 3L!
After these erros, we have a mutex locking problem which leaves our
application hanging.
Any help will be greatly appreciated!
thanks
suma
Here is an Excerpt of the log file
Task 9: extConn4030a808.Write: 194 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
Task 9: extConn4030a808.Write: 233 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:47
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:47
regards,
Suma Venkatesh

R12 upgrade issue:Not able to login using forms:Please help****urgent

We have recently upgraded our instance from 11.5.9 to 12.0.4 in Windows 2003 server.
We are unable to login to forms after upgrade, however we are able access self service responsibilities without any issues.
We are getting APP-FND-01496 when we access any forms responsibility. We have tried all possible metalink notes with no luck.
Any help to resolve this issue will be appreciated.

Duplicate thread ...
R12 upgrade issue:Not able to login to forms**please help
Re: R12 upgrade issue:Not able to login to forms**please help

ECC 6.0 EHP-4 upgrade Issue in phase MAIN SHDRUN/ALTNTAB FILL were negative

Hi Basis Expert,
while doing ECC 6.0 EHP-4 Upgrade in MAIN_SHDRUN/ALTNTAB_FILL phase we are getting the following issue please help us.
Checks after phase MAIN_SHDRUN/ALTNTAB_FILL were negative!
Last error code set: BATCH JOB RDDNT2MT FAILED: Error(s) found in the log(s), accumulated in "ALTNTFI.ELG".
We check the shadow instance is up and we can log in to the system. Check ST22 and SM21 notice no error.
Check the JOB RDDNT2MT (SM37) successfully running and all the job finish without any error.
Hope anybody can share a bit your experience on this issue. we try search the note and find the forum but no luck.
Thanks

Hi,
> 2EETG011 "No shadow system""(environment parameter)""auth_shadow_upgrade"
> 2EETG011 "No shadow system""DB-connect not against shadow tables !"
>
It looks from your log that shadow system is not able to connect to database. Please check your shadow system. Check below link as well:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/ecc-6-upgrade-issue-in-phase-altntab_fill-1556272
Thanks
Sunny
Edited by: Sunny Pahuja on Oct 15, 2010 1:27 PM

Media Go Installation/Upgrade Issues

Similar Messages

Maybe you are looking for