Media hub - Standby mode?

Hi.
I am the unhappy owner of a Cisco media hub.
Have been looking everywhere for someone who can help with a standby mode for my media hub, but have not succeeded yet.
Can it really be true that there is no firmware with a simple standby for this model? all they cheaper model on the market have this feature.
Hope somebody could help with this problem. :-)
Kind regards
Kasper Kjaer

Hi,
I do agree with slickyworm. However if you're using an NMH4XX series, you have the option to adjust the backlight and screensaver through the LCD menu which will somehow reduce its power consumption. And as far as I know, the NMH operates at 13 watts which I guess very acceptable specification for a media storage device.

Similar Messages

Stop/start in PGW active/standby mode

Hi all
My VOIP Network has 2 PGW in active/standby mode. But when we add more telco, the state of ss7path is OOS. i must stop/start the PGW and ss7path is IS status.
Now PGW is running services. it processing many call with other telco.
i have question need to support.
When we stop/start PGW,has PGW disconnected all call or not?
Thank for supporting
PhaiLQ

If you restart the service on active pgw, calls are disconnected. If you don't want out of services you must pass the control to the standby server first.
From mml console of active server use the command:
rtrv-ne    to check the status, the output is:
    MGC-01 - Media Gateway Controller 2010-09-07 16:53:42.655 MEST
M RTRV
   "Type:MGC"
   "Hardware platform:sun4u sparc SUNW,Sun-Fire-V240"
   "Vendor:"Cisco Systems, Inc.""
   "Location:MGC-01 - Media Gateway Controller"
   "Version:"9.6(1)""
   "Platform State:ACTIVE"
sw-over::confirm to swich control to standby server
now restart the service
/etc/init.d/CiscoMGC stop
/etc/init.d/CiscoMGC start
P.S. If I remember the right way, the OOS (out of service) state of new ss7 path can be set in IS (in service) via mml command line without service restart.
set- your ss7 path ::IS   use tab for help
Regards.

Media Hub not available on windows network

I have a strange problem I've been trying to solve and really need some help. My media hub boots correctly and for a period of about 5-10 minutes, appears as normal over the windows network. I've mapped drives and can access the unit through those as well initially. After that 5-10 minutes, I get an error message when trying to access it through windows file network. The error message is usually about there not being enough system resources and occurs on any computer used to reach it. The media hub CAN BE REACHED by using the web portal or web interface. All the files are there. The web interface shows the hard disks have passed their health check as well. They are set in the Raid1 mode.
I am at a loss. What is happening to this thing to make it loose it's connection at the 5-10 minute mark???

hello there!
If your media hub was working fine before and just started acting up....perhaps this has something to do with the media hub's firmware.. since you can access it through the media browser you can check the configuration page and check if it's updated or not and update it if necessary. By the way, just make sure you are using a wired computer in updating the firmware.
+ leiram +

Satellite L775D-S7222 standby modes stalls the computer

sometimes trying to put the laptop in standby mode FN+F3 stalls the laptop. the screen goes blank and nothing else works, the only option is to hard reset . when this happens most lights stays on and even after removing the power cord the power on light stays lit.
update to the latest BIOS , still the same.

Satellite L775D-S7222
it is a month old laptop. I called them up, their response was to send the laptop back
It's usually suggested that you restore the hard disk to its original out-of-the-box contents using Toshiba recovery media.
That tells you if there's a software problem.
I believe this could be windows 7 issue. have a friend who has Dell and has similar problems .
Not much of a sample size.
On July 12, 2011, the sales figure was refined to over 400 million end-user licenses and business installations.
-Jerry

New Media Hub NMH405 - Transfer speeds

I have a brand new Media Hub with 2 Seagate 1.5 TB drives in RAID 0 (Linear 2), and the transfer and read speed are horrendous. The Media Hub has the latest software (2.17.13), and the drives are not the batch of drives that are affected by freezing/throughput issues. Maximum SMB transfers are aound 3 MB/s bidirectionally. Playback seems to be okay for the most part as long as I dont start more than one stream. The main networking device is a brand new Apple Airport Extreme which has 3 GBE and a dual band draft N accesspoint. Everything else seems to be in order, but the speeds are horribly slow.
I was going to put the device in single drive mode to see if the problem was the RAID, but I wanted to check first to see if anyone else had any ideas.
Message Edited by jedson328 on 01-24-2009 11:04 AM

I would like to get some info on your system that you are testing with - OS version, connection type (are you hardwired or wireless to your router), computer specs..etc.
How are you measuring the performance? Are you using a tool? We would love to make sure the Media hub is running at the best possible performance, and from all our testing internally and externally it is, so your issues are certainly a concern.

Mail is not sending after standby mode!

Hello.
My problem is that mail after reactivation from the standby mode is not sending emails anymore,
to send emails again i need to deactivate and activate again the internet connection ore restart the mac.
I had the same problem already with my old mac with lion. Is there a fix for this problem?
iMac Retina 5K with OSX Yosemite 10.10.2

I had the same problem with a satellite A100. I did the following:
1. Go to control panel
2. In classic view select system
3. go to tab Hardware
4. Select device manager
5. Open the "universal serial bus controllers" (via )
6. Double click USB Root Hub
7. select tab: "Power management"
8. unselect allow the computer to turn off this device to save power
9. My computer has several USB Root Hub. I repeated 6 till 8 for all
10. I restarted the computer, but don't know if this is necessary.
After this the problem was gone. Enjoy

Hardware sleep, hibernation and standby mode tracking

Is there a way to find out that the hardware user is on is about to go into sleep, hibernation or standby mode? I need to be able to save data to the server before the hardware temporarily shuts down. I can't seem to find anything online that addresses this issue. I want to create a code similar to the Windows Media Player that kicks in a warning before changing modes. Thanks.

Hello avwood:
You might have add on running on your Google Crome Browser . Just dissable all your Google Crome add ons. See if that does trick. If no add ons are enabled then just un install it and down load a new copy. Then see if your computer goes to to sleep. If neither one these methods work. Then most likely it is being run by U.S.A. government spy crape back ground hiden program. I wouldn't recommend using it in the first place. frrw

Does the 405 have Standby mode?

Hi, I bought an NMH405, the installation went well and I have all the media in.
The problem is that it is always ON and the fan is running all the time and the back light is also blinking all the time.
The computers on the network are all off and not one is using the HD.
Does the 405 have an standby mode or a setting that I can set to make it go sleep till some one try to access it?
thanks

The NMH4XX series have power saving features that can be enabled using the LCD Menu. From there, you can adjust the backlight and screensaver. The fan on the device though has a bit complex function.
Read number 18 of the NMH FAQ's.

Lenovo T61 won't stay in Standby mode

Im running windows xp. my computer wont stay in stanby mode when i close the lid or click start, shut down, and then choose the standby option. When i click shut down the computer wont stay shut down. It just restarts. Basically my computer wont stay in standby mode or shutdown.
what could be the problem? and solution...?

Check your system logs in your Console application for clues to what is triggering it to come back on. USB hubs or something connection to the computer via USB or Firewire often cause this issue. Try disconnecting any external devices.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG

Mac Mini as a Media Hub

This thread answered a lot of my questions, http://discussions.apple.com/thread.jspa?threadID=2217399, but I would like to be completely sure my idea is viable before spending the time and money on the set up.
I have the following Samsung, http://reviews.cnet.com/flat-panel-tvs/samsung-fp-t6374x/4507-6482_7-32552703.ht ml?tag=psum. I would like to use a Mac Mini(the $800 one) as a media hub, in conjunction with a 1TB Time Capsule. The Mini would not be hard wired to the Time Capsule. I also have a MacBook Pro that would also be connected wirelessly. I'm hoping to be able to download movies from the internet, whether it's from a place like megaupload or a torrent site to my MacBook, then transfer to the Mini in order to watch the movies.
Should the above set up accomplish what I'm hoping? And will I be able to find the proper codecs to use with Snow Leopard in order to format the movies properly? I'm new to the whole operation of downloading movies in order to view. I'm open to any suggestions.

Since what you are talking about is basically piracy of movies, generally you'll be on your own when it comes to what it will take to view them. Part of the value of actually purchasing movies is the reliability of function it includes - piracy has no warranty.
If you would like to download movies in a fairly affordable and legal fashion, you should consider Netflix. They have been very good at working with different media player software makers to allow for safe, functional access to your subscribed content.
Otherwise your setup sounds good. The Samsung has the Just Scan setting you'll probably need to use to make the desktop fit properly. I recommend using a DVI to HDMI cable. If you don't have a surround sound, the 3.5mm stereo plug to RCA connections as advised in your TV's manual is what you'll need for audio input to the TV. For surround sound you should use an optical (Toslink) connection.

How do I set a guest password on my media hub?

Page 43 of the NMH405 media hub manual indicates that you can set a guest password on users. It is supposed to be under settings\system and although I see all the other settings under system, that one isn’t there. Maybe they cut the feature at the last minute. I'm running 3.18.15 of the firmware.
My ultimate goal is to have one account that I can use to write new content to the server and one that is read only for my family. I'm worried right now that they will delete the content (which they have done).
Any advice or workarounds to achieve this would be appreciated.
Thanks,
Peter
Th

Guest access can only be used if you'll be accessing the media hub remotely. Network Media Hub also lacks multiple user access.
You may refer to these articles about your Network Media Hub:
- Article ID: 19717: Accessing the Media Hub Remotely as a Guest
- Article ID: 19714: Creating a Guest Password for Remote Access to the Media Hub
- Article ID: 17571: Media Hub Lacks Multiple Users
If everyone needs to believe in something, I believe I'll have another beer..

Iphone 6 randomly shutdown in standby mode

My Iphone 6 16gb randomly shutdown in standby mode, i only can turn it on by hold POWER + HOME. here is the log :
{"name":"Reset count","bug_type":"115","os_version":"iPhone OS 8.1 (12B411)"}
Incident Identifier: F0B79DBE-0BE1-431A-813E-70E7E2C17942
CrashReporter Key: 7305c452a84bf7ce3738c4bedf794c8e76fc4c58
Date: 2014-11-24 09:17:58 +0700
Reset count: 1
Boot failure count: 2
Boot faults: wdog btn_rst
Boot stage: 32
Boot app: 2681261667
Is this a hardware issue or software issue? thanks

Hi hnguyen1982,
If you are having an issue with your iPhone shutting down unexpectedly, I would suggest that you troubleshoot using the steps in this article -
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

7.3.2.6 crashes when coming out of standby mode

Has anyone else seen this problem with iTunes 7.3.2.6?
It crashes when coming out of standby mode. There is an error report I can send to Microsoft, but since it's an Apple program, I never send it.
Using standby was OK with iTunes 7.2.

Okay. Let's try getting a fresh one through to Roy.
If the log has been "live" for a while, info about every crash of any description will have been being added to it (with my Morrowind crashing on a daily basis, i once found a DrWatson log on belladonna that was over a GB in size). So it'll be easier for him to work through a log with just one crash on it.
Will run through my standard instructions just so i don't forget anything. (Sorry, I know you're up to speed on this sort of thing, no offense meant.)
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and send it as an attachment to this email address: [email protected]
In the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

IPhone 5 battery draining after iOS 6.0.2 update even on standby mode without wifi/ 3G at all.

My newly bought iPhone 5 was on iOS 6.0.1
everything worked fine and i had no wifi nor battery issues at all until I upgraded it to iOS 6.0.
i noticed some battery drainage even when i'm not using my phone at all it still drains 1-2% on standby mode with no wifi nor 3G at all in an hour,
If i use wifi it'll drain 4-5% in a few minutes time, more serious case when i use 3G, it's literally draining in EVERY SINGLE MINUTE.

ckuan wrote:
Jonathan wrote:
So my iPhone 5 always had the problem of disconnecting from the wifi signal I was on whenever the iPhone is locked.
Per designed, Wi-Fi will disconnect in sleep mode to save battery.
If you want Wi-Fi to stay connected even in sleep mode, plugin to a wall power socket.
No it's not "per design". It's not supposed to disconnect when locked/in sleep mode. The whole concept of having live notifications to work when your phone is locked is the standard for smartphones. Having this feature only accessable when pluging/charging the phone is rediculous and counter-productive. But it's good to know that I'm not the only one who has this issue. I hope all our issues are solved swiftly, good luck to you all

What's Happening With This Media Hub?

I have the NMH410 version 3.18.15 purchased over 1 month ago. I'm using this hub as a storage device for my converted VHS video tapes. Some strange things are happening:
Files Listed and Not Listed:
I've used the Media Importer to load my converted VHS files onto the Media Hub and in some instances I see those files on the File Browser. However, I do not see some of those same files when I go to select them from the Video icon on the Homepage. Nor, do I find those files when I use the search tool.
Conversely, I see some video files from the Homepage icon that do not appear on the File Browser list. Yet, I know I uploaded those files at an earlier date.
I've used the "Scan" and "Refresh" buttons to no avail. What could be causing these two file problems?
What do the following messages mean?
Transferring data from "Media Hub name"?
Waiting for "Media Hub name"?
These two messages reside on the lower left side of my task bar. My cursor also appears to cycle through some sort of purge process.
Finally, is there a User Guide that can help me with many of the questions I still have concerning this product? Or, are we left to submitting these questions and hoping someone has a timely answer that is easily and rationally understood
Thanks
dutch184.

Thanks Mared1784 for taking the time to share your experience with me. But there is no way that I can "backup" almost 290GB of files to reformat the Media Hub drives. Plus, there is no guarantee that these same conditions will not happen again.
I have noticed that this condition (files listed on the file browser, but not accessible from the homepage or search engine), began with files loaded after November 12th. It seems to me that if the files are on the Media Hub (file browser) then I should be able to see and access them from anywhere within the Media Hub.
This tells me there is either a development or programming glitch that needs to have a fix made available through another firmware update. No one should have to go through the gymnastics you went through in order to correct the problem.
I appreciate you sharing your experience and suggestions with me.
Thanks
dutch184

Media hub - Standby mode?

Similar Messages

Maybe you are looking for