Media in CD / DVD drive not writeable by Media Center

I have a Qosmio F20 laptop running Windows XP Media Center 2005 edition, when I try and record my recorded tv program onto a DVR+RW I get the following error message,
Media in the CD/DVD drive is not writeable by Media Center
I have update rollup 2 installed.
Rgds

Many thanks for the info above. Ive looked at those pages but was not able to find the solution.
I can record using the installed Sonic recording package onto all of my discs, CDR CDRW DVD+RW with no problem.
I just wanted to record via Media Center in the hope that it would play on my DVD player attached to my TV.
My CD drive model is UJ-840S so I hoped I woudnt have the problem. As the info from Microsoft says that its
the UJ-846S that may not work without installing Update Rollup 2 for Media Center.
I saw the following explanation on the Microsoft page http://support.microsoft.com/kb/909083
The computer is using a DVD-RAM drive that was not supported in the initial release of Windows XP Media Center Edition 2005. For example, the problem is known to occur when you use the Matsu****a DVD-RAM drive model UJ-846S. This drive was not supported in the initial release of Windows XP Media Center Edition 2005.
Update Rollup 2 for Windows XP Media Center Edition 2005 adds support for additional drives, including the Matsu****a DVD-RAM drive model UJ-846S. Without these updates installed, the UJ-846S drive will correctly recognize DVD-R, DVD-RW, and DVD-RAM discs. However, the drive will not recognize CD-R, CD-RW, and DVD+RW discs.
To determine the model of optical drive that is installed in the computer, follow these steps:
1. Click START click RUN type MSINFO32 and then click OK
2. In System Information expand COMPONENTS
3. Click CD-ROM The mode of the optical drive is displayed in the NAME section.
I will keep trying various Microsoft solutions and come back If I find the answer.
Thanks again.
Mike
Message was edited by: miketurner201

Similar Messages

IMac 24" .a valid DVD drive not found - 70012

I try to insert a DVD to play on my imc , but the disc eject out after the drive search for no disc . I click on DVD player, message as a valid DVD drive not found-70012

Sounds like a problem with the Optical Drive, I find them far too short lived in OSX anyway!???
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Disk Burning & report what it says, like ...
TSSTcorp CDDVDW SH-S222L:
Firmware Revision:          SB02
Interconnect:          ATAPI
Burn Support:          Yes (Unsupported)
Profile Path:          None
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -RAM, -RW, +R, +RW, +R DL
Burn Underrun Protection CD:          Yes
Burn Underrun Protection DVD:          Yes
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:
Media Type:          DVD-RW
Blank:          Yes
Erasable:          Yes
Overwritable:          Yes
Appendable:          Yes

Windows 7 install stops at "CD/DVD driver not found"

When trying to install Windows 7 with boot camp, all goes well until it stops and gives me the "CD/DVD driver not found". I have a mid 2010 Mac Pro with a 500 GB SSD drive. I have burned a DVD at 1X from a iso file.
Thanks

Can you verify the MD5/SHA1 of the DVD with the ISO using OS X 'openssl md5' or the M$ FCIV tool? The source of your ISO should be able to provide MD5/SHA1.
OS X Example
openssl md5 ~/Desktop/GRMCPRXVOL_EN_DVD.cdr
MD5(/Users/MyName/Desktop/GRMCPRXVOL_EN_DVD.cdr)= 977f4f0f1400be91855789213e07b031
Windows FCIV example
D:\>C:\"Program Files (x86)"\FCIV\fciv
// File Checksum Integrity Verifier version 2.05.
Usage: fciv.exe [Commands] <Options>
Commands: ( Default -add )
        -add    <file | dir> : Compute hash and send to output (default screen).
                dir options:
                -r       : recursive.
                -type    : ex: -type *.exe.
                -exc file: list of directories that should not be computed.
                -wp      : Without full path name. ( Default store full path)
                -bp      : specify base path to remove from full path name
        -list            : List entries in the database.
        -v               : Verify hashes.
                         : Option: -bp basepath.
        -? -h -help      : Extended Help.
Options:
        -md5 | -sha1 | -both    : Specify hashtype, default md5.
        -xml db                 : Specify database format and name.
To display the MD5 hash of a file, type fciv.exe filename
D:\>C:\"Program Files (x86)"\FCIV\fciv -add Windows8.1-64bit.cdr
// File Checksum Integrity Verifier version 2.05.
f104b78019e86e74b149ae5e510f7be9 windows8.1-64bit.cdr

Cd dvd drive not detecting to cd or dvd.

cd dvd drive not detecting to cd or dvd. properties of same shows ok by device maneger. rotation of disck could not observed.

Hi Virendrasingh,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Notebook and CD/DVD not working correctly. I would perform a hardware test. Where did the CD come from? Were you having issues with the CD ROM before? I would be happy to assist if needed as there are many models of HP Notebook, I would need the model number. How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Dvd drive not worked properly

i have hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action till now .why u people do like this .i want explation and just change my dvd drive that's all.

tcrite,
Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

My dvd drive not recognized in device manager,getting the yellow explanation mark.

my dvd drive not recognized in device manager,getting the yellow explanation mark. Tried uninstallingdevice drive and scanning for new hardware. scanned for updates, etc. I getting no results. The laptop is a Pavilion DV5. Thanks

Hi,
It could be that the drive has a Hardware issue, but try the following.
From the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, open Device Manager, right click the DVD drive and select Uninstall. When this has completed, restart the notebook and let Windows rediscover the device and check.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HT5639 after The Boot Camp for Windows 8? DVD Drive Not Recognized or Reading CD/DVD

after i made The Boot Camp Setup for running Microsoft Windows 8? DVD Drive Not Recognized or Reading CD/DVD

thanks for the response
1. Yeah I thought that's a mandatory thing because i need to be able to control the brightness with my keyboard, updated graphics card, boot camp control panel, etc
2. No there's no enable for this because Windows 8 recognizes it as a "disconnected device" and asks me to reconnect the dvd drive to the machine (which it obviously already is).
3. Ive tried those before, also even editing the registry but it didnt work.
It's weird because it never happened before on Snow Leopard » Lion bootcamp driver updates. Just in Mountain Lion

My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no error

My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no errors.
I tried to reinstall driver.
I downloaded new codec
I tried Microsoft FIX IT
Nothing worked.
Need some help.
Thank you!!
Paul

Hi Albos, This is a known problem. These superdrives die after a while. See the various threads on this site and the internet. I have the same problem with my Imac 20" 2.16 ghz. Just wants to burn and read cd's. Its has to do with the laser. For DVD an CD are two different laser and the one for DVD's has probably died in yours (as it did in mine). I bought an external LG burner and problem solved. (And a lot cheaper than replacing the superdrive)
Hope this helps you.
Robert

EMac External LACIE DVD Drive not reading.

eMac External LACIE DVD Drive not reading.
eMac 700 MHz running OS X 4.4
Came without DVD or modem internal
Has 256mb memory
Bought a used Lacie 1394 Firewire DVR External.
Was able to burn DVD’s and CD’s with Toast 6 Light.
Cannot find the “DVD Player” on the hard drive.
It will read data DVD.
eMac will not read any movies burnt or bought.
I was told I probably need more memory?
Thought running IDVD would fix the problem.
No Soap.
This machine was giving external modem problems before Tiger was installed.
Before we spend more money or just get ride of the eMac.
What is the DVD problem?
This same Lacie burner reads and writes DVD and CD fine with our iMac 450 DV 320mb memory. Running 9.2 and X.3

OS X 10.3.x / 10.4.x natively support data burning to external DVD drives but video payback requires software such as iDVD which isn't installed by default on models without an internal DVD drive (the installer sees no internal drive and thinks it's unnecessary). Try downloading VLC Player and see if that will let you play movies.

Can I watch a DVD which I am playing on my computer's DVD drive (not streaming through iTunes or Netflix) on my TV set with Apple TV?

Can I watch a DVD which I am playing on my computer's DVD drive (not streaming through iTunes or Netflix) on my TV set with Apple TV?

I have a macbook pro and a Imac with these I can use the air play option to send the video to the apple tv, i use all the time, not sure how to do it if you are using a pc thow.

"valid dvd driver not found"

I have a Powerbook G4 12"--has always worked without problem.
However, this am tried to play DVD--got the error message "valid DVD drive not found". No driver seen in system profiler.
There is no CD or DVD stuck.
Have gone through the workarounds suggested in discussions--open firmware ejects etc...
Has anyone found a solution other than paying $500 to replace the drive?
Many thanks

First see if the issue is user or system related. Go to Apple menu -> System Preferences -> Accounts and add an administrator account, and log into it after logging out from the Apple menu.
If that doesn't work, try locating a preference in the System/Library or Hard Drive -> Library for com.apple.dvdplayer and removing it. Same for cache files.
If it still doesn't work, try VideoLan Client:
http://www.videolan.org/vlc/

Why does my dvd drive not load

why does my dvd drive not load

It might be broken. Take your machine to your local Apple Store or an AASP for a free diagnosis and estimate for repair.
Clinton

Windows 7 ultimate install on Hp Media center pc m7170n now cd/dvd drives not detected

My computer crashed so I went ahead and had windows 7 installed. Now my cd/dvd drives are not being detected. Any solutions out there?
Anthony

Ascottbag, welcome to the forum.
Here is a guide that may help you solve your problem. Please let us know if it helps or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

External DVD Drive not working with osx 10.8.5

Hi, I'm having issues with my MacBook Pro 15" 9,1 working with an external DVD drive. I am running OSX 10.8.5 and have been troubleshooting this issue for a few weeks. The optical drive itself is the original drive that came with the computer, but I have put it in an external enclosure to free up space inside the body of the MacBook Pro. The drive seems to function fine with CDs (playing and ripping - haven't tried burning yet) but is extremely inconsistent/barely functional with DVD playback. Only one DVD in my collection properly works - others bring up error messages in multiple programs (VLC, Wondershare, the native DVD application, etc.) and another continuously loops back to the main menu each time "Play Feature" is selected. These are a variety of DVDs that range from obscure to commercial and old to new (the oldest and most obscure is the only one that works). After deciding that it is not the programs, I replaced the enclosure. I still had the same exact issues. I reset PRAM - no solution there. I created a new user on my computer, installed the same media players and had the same luck. I then used the same external drive on my old MacBook Pro 15" (5,4 running OSX 10.6.8) to see if it would work there. It worked perfectly (with the native DVD application). What is going on here and how can I get my new computer to recognize the external DVDs reliably and consistently?

older superdrives were Hitachi mfg, new ones are Panasonic. Since yours is new and panasonic, indications are it wont work thru the enclosure on your NEW macbook, rather as you state on your older Mac.
until you said it worked fine on the old machine, the logical conclusion is a dirty lens on the laser since it reads CDs fine but most DVD not, since the track is much smaller.
Considering a new superdrive is only $48 on ebay ,or $78 for a new superdrive, your frustration might be too much, and just grab a new superdrive.
Your detailed information indicates a firmware incompatibility of the panasonic superdrive thru an enclosure
This is the new superdrive, made by panasonic as you have in your enclosure:
http://www.ebay.com/itm/like/221280580133?lpid=82
of course thats a lot of trouble buying that AND an enclosure, easier still is just getting a Mac superdrive inside its working enclosure designed for use as such:
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive

External DVD drive not working with Lombard G3 333

I have an external DVD drive that worked when I had 10.4, but had to reformat HD and now only have 10.3.9, and now the DVD drive does not work with DVDs, it will work with CDs and CDR media, but not with DVD media. My Lombard did not come with DVD originally and I am using a PC Card (Macintosh PowerBook DVD-Video PC Card For PowerBook G3 Series) and it worked before with 10.4, but not with 10.3, any ideas? Also have tried with 9.x, no go either. Any help would be appreciated.
Also, would it be difficult to add a DVD logic board to my Lombard?
Joey

xamdu,
I am reading and replying to this post after first replying to your other post, so a few of my previous comments are redundant.
Regarding the FireWire(?) USB 2.0(?) DVD drive: It is possible Tiger supported your DVD drive but Panther does not. I would give PatchBurn for Panther a try:
http://patchburn.de/download.html
If the above is unsuccessful, take a look at this workaround:
http://www.macosxhints.com/article.php?story=20040330171655882
You can swap logic boards but it does require a lot of disassembly.
Since no version of OSX supports Apple DVD Player, I am assuming you have a third-party player like VLC installed to watch movies. If this is the case, the DVD Decoder PC card is not necessary. If booted to 9.x, you of course will need the decoder PC card but I did not know 9.x's Apple DVD Player supported external drives.

Media in CD / DVD drive not writeable by Media Center

Similar Messages

Maybe you are looking for