Media in the timeline says it needs to be connected, but it plays fine.
Hey guys,
I'm using Final Cut 7 and today I had to disconnect my external drive that has the project I'm currently working with on it. When I reconnected the drive and opened up my project ,some of the clips in the timeline where there is usually a picture of the clip, now says the media needs to be reconnected. However, all of the media still plays fine in the viewer and the canvas. I even reconnected the media, but it still looks the same on the timeline. I was just wondering if this has happened to anyone else, and if they know the solution to it.
Thanks,
Jack
Trash your Thumbnail Cache, usually located in the Final Cut Pro Documents folder.
MtD
Similar Messages
-
I bought song with itunes card. The song won't play on my computer or devices. The messages says I need to authorize my computer to play the song. However, when I "authorize" my computer I get message that this computer is already authorized.
and, what is even more strange...
I actually bought 2 Billy Joel songs NY State of Mind from Essential Billly Joel and Italian Restaurant from Greatist Hits vol 1. Neither song would play.
I went back the Apple store and tried to re-download NYSOM. It let me do it for free. Before I checked I tried to re-dowload IR but inadvertantly selected same song but from The Stranger. I had to pay for this one. The re-downloaded NYSOM still didn't work but IR I bought from Stranger worked. So, I bought NYSOM from Greatest Hits vol 1. Didn't work!!! Tried again and bought from another album, Turnstiles, and that one worked. So, I bought 5 songs, only 2 of which will work.
So, now I ask - is there any way to get my money back? -
Iphone's itunes says it needs a wifi connection, but its connected.
I have all the latest updates on my iphone. My iphone does not seem to be able to use my home network, despite the fact that it says it is connected... itunes says i needs a connection while wifi settings says it has one. any ideas?
Hey samuel,
What IP address shows up on the iPhone? Goto Settings>Wi-Fi> the blue (>)
Also, try making the iPhone forget the network if have not already done so.
If the issue persists goto Settings>General>Reset>Reset Network Settings and attempt to connect again.
Jason -
hi, my daughter wrote wrong paswords in my ipod touch and it is blocked. It says it needs to be connected to itunes, but once its there it says the ipod is blocked with a passcode..the ipod is just blocked. what can I do?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I want to open a radio file that is .rm. I get a message that says I need additional Quicktime software, but I cannot locate what I need to download on the QT website. Anyone got ideas about how I can open this file?
Hi bert,
the ".rm" extension is created by 'Real Media' application.
The easiest way to use it is to install the 'Real Media' player:
1. RealPlayer BBC.app
2. RealPlayer 12.app
I have both installed & use them sometimes.
(The 'BBC' wersion doesn't have any adverts with-in the app.) -
Cannot get my tape based media to the timeline in Premiere Pro CC
Cannot get my tape based media to the timeline in Premiere Pro CC, I have eqrlier in my edit, but now I get the hand dragging it with the circle and slash on it . THis will not let the media download to the timeline anymore. What happened.... DId I hit a button and/or cause it to be locked out from loading media intot he timeline. My digital basde media loads fine.
Here is more information: I use Premiere PRo CC 7 and the taped based media in the bins are from a Canon HV30 taped based catured to PP directly in a MPEG format. I have already used some edits from this media as well as my captures from digital, which isnt causing any problems. When I mark the taped based media in the source window and attempt to drag it into the timeline the hand gets a circle and slash line on it and will not let me place it into the timeline. Yet I can still load my digital stuff into the timeline and edit normally. I need some footaghe from the tapes but cannot get it into the timeline from the source monitor even after updating, shutting down and reopening. No avail still when trying to drag the hand with the circle slash still exist not allowing it into the timeline. Previous footage on the timeline works no problem. This started yesterday.
-
I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!
I am so sorry I am frustrating you. This is the first time I have used this community and am leanring as I go. I am not able to see the entire post that you leave, unless I look at it on my phone (email)--I am so sorry. You have no idea how much i appreciate your help. Yes, I see that I can get the later version of OS software, but its not availabe for immediate download. My only options appear to be having it shipped, or going to the store to purchase. And if you know of another way that I can access all of my itunes library music on my new phone withouth using itunes, I would love to hear about it.--thanks and again i am so sorry for frustrating you.
-
My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?
Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS -
My iTunes won't let me connect my iPhone because it says I need an updated iTunes, but when I try to download the new iTunes, it says that my Mac software (10.5.8) is too old. However, there are no software updates available. What can I do?
It depends on what iPhone you have.
If it's an iPhone 4S or earlier, click here.
If it's an iPhone 5, you need to buy a Mac OS X 10.6 DVD, and that requires an Intel Mac with at least 1GB RAM.
(73384) -
my iphone 3gs keeps showing the screen with the connect to itunes display, and I've restored it multiple times on different computers, but everytime it finishes restoring, it shows the display again and the computer says it needs to be restored. can anybody help me with this?
it was saying error code 1, i tried the things it said but none of it worked. now it is not showing an error code at all, it just keeps saying it needs to be restored.
-
my ipod & itunes are fully up-to-date with 4.2.1 for ipod and the itunes 11.0.1 and every app (ex facebook & ice cream jump says i need 4.3 version but when i click all updates say its all up to date. I have tryed restoring it 4 times to factory as well. Please help I have set-up over 10 ipods and differents generations and have never had this issue like this, I even have all ratings ristriction unchecked and payment info in itunes so i need help please
but i could download on others ipods in same gen, facebook and ice cream tower, everything i look up and try install always says that for apps so your saying that i can not ever download any apps to this ipod ever againÉ
-
I downloaded news Keynote version but when I try to open it the compute says I need to update it. Any ideas what could be going on?
Delete Keynote then download.
-
apps store said that the game is free but why the bill says it needs money?
please reply me soon!!!!
chan family
<Email Edited By Host>Did you add or change your credit card details when downloading the app ? If so then you've probably received a temporary store holding charge, which should disappear within a few days : holding charges. Or have you made any in-app purchases within the app (what app is it) ? If you log into your account on your computer's iTunes (Store > View My Account), what shows under your purchase history ?
As these are user-to-user forums, you are not talking to Apple here, I've asked the hosts to remove your email address from the post's title. -
Keynote: need to install keynote in my MacBook Pro; the AppStore says I need to have OS X 10.7.4 but it also replies that my OS X 10.6.8. is already updated. What can I do?
You need to either upgrade your OS or buy install an iWork 09 DVD. If you're using a Core 2 Duo or better Mac with at least 2GB of RAM, it's cheaper to buy 10.7 or 10.8 unless you'll also need to upgrade any other software such as Microsoft Office 2004; neither OS supports PowerPC applications. If you're using a Core Duo Mac, you must buy the iWork 09 DVD.
(74749) -
I can not get my email to send through my iPad email. The email works for all other options. The error says I need to enter a password in setting, but I have entered the password numerous times to no avail. Any ideas?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Cheers, Tom
Maybe you are looking for
-
Read Unicode string entry out of MS-Access though Java
I'm making a small Finnish Dictionary programme use Java,so i first need to test if I can display those Unicoded Finnish words from Access to Java. Those words reads well from my FFF.mdb by Java,but when print out on the screen,some Unicode character
-
Migrating from ACS 4.2.0 to 4.2.1
Team, we are running acs 4.2.0.124.16 on cisco appliance 1113.We need to uprade it to 4.2.1.15 which is the latest release.and need to know the dependencies whether any license required ...??? Need quick help and would be appreciated.
-
Interesting Feature/Bug?
Try this: Play a song in iPod, and if you have a Internet connection, hit that as well. In the top right corner, you'll see a small blue play button. Scroll down the page a bit, then hit that button. It does nothing in iPod, but zings you back to the
-
Is it possible to make a receiver step return immediately?
Hi everyone, I am implementing a model with a loop to handle multiple messages. if there is a message meets requirement, the loop exits. but there MIGHT be other messages parked and I need to notify the sender of the message not being processed. so i
-
Phase shift, frequency of 2 analog signals, Diadem 9.0 or 9.1
I have to acquire 2 signals: FORCE (N) and VELOCITY (m/s) for many frequencies parameter in Diadem 9.0 (5 to 150 Hz). This frequency parameter is a analog voltage output signal which is converted in frequency by a frequency vibrator instrument. The m