Media Key stop working after firmware update on 55...

The media key was working before the upgrade. After I upgraded the firmware, it stopped working.
My phone info:
5530
software version: v 11.0.054
customer version: 11.0.054.207.02
language set:25
Type: rm-504
latest update: 10/21/2009

"The media key was working before the upgrade. After I upgraded the firmware, it stopped working.
My phone info:
5530
software version: v 11.0.054
customer version: 11.0.054.207.02
language set:25
Type: rm-504
latest update: 10/21/2009"
Did you update using NSU? I have updated mine recently and I have v11.0.054 with custom version 11.0.054.C02.01, language set:22.. and my media key is still working. Am I missing some updates? Nokia Software Update checker says theres is no update yet.
Message Edited by RhomANZ2 on 30-Oct-2009 03:53 AM
Nokia 5530 Xpress Music
v11.0.054
"How We Respond Is Who We Are..."

Similar Messages

Satellite A105 Shift Keys stop working after BIOS update

I have a stack of laptop boards from the A105 series (Intel chipset) that I received with bad BIOS's. Two worked, and I updated the BIOS's on them to fix CPU compatibility issues. After that, the shift keys stopped working, and pressing Shift-A causes the power light to dim. Reverting to ANY previous version BIOS, whether through the Windows program, CD, or Crisis Recovery floppy (magic key is "F", not "B", "Esc", or "U"), does not fix the keyboard problem.
To make things more confusing, I did notice that the one single BIOS that seems to actually correct the problem is version 1.50, which I haven't seen available for any Tecra A7 or Satellite A100/A105, except a couple A100's, but the BIOS file is much too small and can't be loaded.
Does anyone have any idea why these Intel-based boards are doing this? Or does anyone know where I can get a usable version 1.50 BIOS?
For the sake of this post, please consider my skill level to be high. (In other words, I would be thankful for people trying to help with "Replace the keyboard", but I have about a dozen keyboards, all of which I have tried, and all of which work on other laptops. Additionally, if you have just a theoretical solution, I'm definitely open to hearing it. Also, if a Toshiba tech would like to reply, I would very much appreciate it!)

Hi, thank you for your help.
Some motherboards were not in chassis when I got them. Is there a place the PSAAxx model number would be written on the boards?
Four PSAA8U (Two A105-S4334 and Two A105-S4014) - Intel Chipset, fingerprint reader. Tried BIOS Versions 1.40, 1.70, 2.00, 5.10, 5.60, 5.90, and 6.00. Shift keys do not work on either one.
Two PSAA2U (A105-S2091 and A105-S2031) - ATi Chipset. BIOS versions 1.50, 1.80, and 2.30. Keyboard works.
Another PSAA8U (A105-S4184) - Intel Chipset, no fingerprint reader. BIOS version 6.00. Keyboard works.
I noticed that so far all of the models with fingerprint readers have the problem. All of the ATi Chipset boards are working fine, but they have significant processor limits. I am in the middle of updating the BIOS in another Intel one using a Crisis Rescue Disc, so after that finishes I will try disconnecting the fingerprint reader to see if it has an effect.
I don't think the keyboard controller is faulty, because these boards all failed on the same day. I have tried updating the BIOS using WinPhlash, Phlash16 in DOS, the install CD, and a Crisis Recovery Disk. I set the defaults in the BIOS almost every time, and I also have tried holding the power button for 60 seconds with the power cord unplugged and the battery removed (as some people have suggested.)
The shift keys don't work in DOS, Linux, Windows, or even in the BIOS. I test it in the BIOS by using Tab to cycle through the fields in time of day, then Shift-Tab to cycle backwards. This works with a USB keyboard, and it also works on the ATi chipset models and the Intel chipset models that are still working.
Thank you for your reply. (-:

N95 Map stop working after firmware update

I have the N95, just update the firmware with the latest (04/25/09), the map App stop working today… it work after the update… it will not load and when I try to reload the map to the phone via Map loader it sees the phone the says it can’t read the license information…
Need help please.

have u tried reinstalling the maps application?
u can get the latest maps application update from http://www.nokia.com/maps
download the application associated with ur n95 and install it using the pc suite application
if my post helped u out, please click the Star next to it to add some KUDOS to my name

Expantion module stopped working after firmware update to uc520

I have recently upgraded my UC520 to software pack 8.2, and since then, the expansion module(7916 24 key) connected to the Cisco IP phone 7965 has stopped working. It just has the Cisco logo and all buttons are lit orange. I have already tried to reflash the software(ensureing to select support for all phones and the expansion module), clearing all settings, deleteing the phone that its attached to in the CCA, rebooted phone several times, removed expansion copletly and reinstalled. Any idea what may of caused this or how to resolve the issue?

zap pram and do a reset of nvram and all in open firmware. Also reset the power manager.
if you don't know how to do it then do a search as Apple's Support site.

Media Keys stopped working after upgrading to Yosemite. Tried several things, what to do?

I have a Late 2013 Mac Book Pro. After upgrading to Yosemite, my media keys (F7-F12) seemed to be working funny. They worked sometimes but not during others. A simple web search seems to indicate that Chrome is the culprit which I believe is the case. However, the instructions to disable Chrome from messing with the media keys does not seem to work (as my version of Chrome does not seem to have preferences to allow me to turn off its access to the function keys). The make things weirder, when System Preferences > Keyboard has the "Function Keys" option turned on, the media keys do not work (in fact F11 clears the screen to show the desktop). And when the option is turned off, the media keys work normally as though they are turned on. Additionally, when F11 and F12 are pressed (to lower/raise the volume), it no longer plays "test sound clicks" to indicate the changed volume. I have tried a PRAM reset to no avail.
Any help is appriciated.

For my hard drive that doesn't show up at all, the problem is not Yosemite per se. It's the USB3 driver incompatibility. Try using a USB2 cable (micro USB just like an android charger cable that plugs in half of the slot on your hard drive) and it will work. Or try connecting it to an older computer that has USB2 ports on it (with the original USB3 cable) and it will work BOTH on Yosemite and Mavericks. Of course it will transfer data at USB2 speeds. Apple screwed up the drivers again so we have to wait for them to 1. receive thousands of complaints 2. wait for eternity to acknowledge there's an issue. 3. take their sweet time fixing the USB3 drivers. Until then you can get by with USB2 cables. I hope this helps!

MG5550 printer stopped working after firmware update!!!

My MG5550 is only a couple of weeks old and has been working perfectly up until now.   I got a couple of reminders to up date the firmware to the latest version.
I followed the instructions and the down load completed and I got a message saying update successful but when I tried to print a document in my useual way it refused to print.   No error message was shown on the printer. I rebooted both printer and laptop a couple of times but to no avail.
Got couple of messages on laptop saying 'printer busy' and 'no communication with printer'.
I'm useing Win 7, connection is via WIFI, printer firmware is now 3.080
Help please I urgently need to print some docs.

It seem to have sorted itself out.    When it I could not get it to work I eventually gave up in disgussed.   To my surprise when I switched it on a couple of days later, it printed the page I was attepting to print and since then it has been OK.   No sure what happened to fix it may have been something to do with a reboot.
I dont think this printer is as good as my previous Canon 4300 but having the scanner/copier on board is really useful.   Find the paper feed is not very reliable where as the 4300 never ever missed a sheet.

My "9-o-l-." keys stop working after startup, and spreading! ahh help?

My "9-O-L-." keys stop working after startup and my arrow keys too.
Sometimes when I start up the keys will work for a bit then one by one stop functioning and then randomly work every so often, then it seems to "spread" to the right shift key, and sometimes the "8-I-K-," keys.
Around the same time when this all began my Battery completely stopped working too, does this have anything to do with it? I've reset my PRAM and no luck.
I'm planning on replacing the keyboard, will that fix the problem? or is it something deeper?
Thanks in advance!
-Andrew

I assume you've rebooted? Can you control the computer well enough to make a new account and log into it? Doubt this will fix it but maybe. The keyboard may need replacing but it might also be that the cable has worked loose so that some of the wires have disconnected but not all. Sounds like a trip or call to Apple is in order.

Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
Test media player at www.vdat.com/techsupport/windowstest.asp

My wifi stopped working after a update last year and I have updated since, can this be fixe

MMy wi fi stopped working after a update early last year and I have just made do since then by using i pad at home. I was going to upgrade my phone but need to clarify if it was the upgrade that broke my wifi and can it be fixed? I have heaed of Apple replacing phones affected by this problem. Please help

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If those solutions don't work your iPhone 4s has developed a hardware problem. The permanent solution is to get it replaced. I have not heard of Apple replacing long out of warranty iPhones.
You can search the internet for heating and freezing solutions that might work (at least for a while).
For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A

BoardMaker plus 6 stopped working after OS update

My Boardmaker Plus stopped working after I update my system to OSi Yosemite. The disk just spins and spins and the program does not come up? Is anyone else having this problem? How can I fix it. I need to use the program for work.

I was worried about this, I still haven't upgraded. But while doing research I saw that there is now an online version, I wonder if it's the same ...

I have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

i have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

Connect it to iTunes on your computer and Restore it. See: http://support.apple.com/kb/HT1808

Delete key stopped working after update

The delete key stopped working last night after updating both safari and itubnes.

No one has any ideas?

My Ipod touch email stopped working after installing Update

my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

Hi, jewlssch.
Thank you for visiting Apple Support Communities.
If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail. If the issue persists, process a reinstall of Mavericks.
Reinstall OS X
http://support.apple.com/kb/PH10763
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason

HT4650 My keyboard has stopped working after an update of Flash Player. Help! What can I do?

Why has my keyboard stopped working after Flash Player update?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do things work in Safe Mode?

Boot keys stopped working after Leopard install

I have seen others having this problem in another thread but no answers, so thought I'd give it a go.
After reading these threads finally got Leopard to install and run okay. Many thanks all. But, along the way, my boot keys stopped working. It doesn't matter what I hold down, whether 'c' or 'cmd-opt-p-r' or 'shift' or any other key combination the machine just boots straight into Leopard.
I have tried resetting the PMU (or whatever it is these days) via the internal button in desperation but still no luck.
Anyone with any ideas?

Same problem here, so I'll pull this post up. No key works.
I always have to go to the Start Drive (or whatever it's called in english) in Preferences Panes and choose the partition I wish to start directly in OSX or Windows for booting back to OSX. This is very annoying. Alt key won't show up any possible boot disk although their both internal drives.
If someone would kindly post any ideas how to change that, would be great. I've done a fresh install, with a Time Machine recovery, but this didn't seem to help.
EDIT:
I found another subjet here from november '07:
http://discussions.apple.com/thread.jspa?threadID=1224639
it seems the new Apple Keyboard is the origin of the Problem on iMac Core Duo. Apple techs said that a new firmeware should be coming before the end of 2007 (but it's february 2008 now ?!?). Any other ideas how to get this work ? I'll write on Aplpe feedback page for sure. Maybe the other boot keys aren't working because of this keyboard too.
Message was edited by: Nordlaser

Media Key stop working after firmware update on 55...

Similar Messages

Maybe you are looking for