Media management with reel names and numbers

Hi There. Does anybody know of a way to manage the "reel' information on rushes. is there a way to change on reel without having to go to the original clip. is there a method of changing the meta-dta for example so the reel number of a link of rushes clips can be change by batch like in avid ( i know i can't expect FCP to act like avid ).
i have many clips in different projects that need to be updated.
Thanks.

is there a way to change on reel without having to go to the original clip.
How else would you do it? Find the clip in the Browser, change the reel number. How else can you change the information on a clip and source file without accessing that clip?
is there a method of changing the meta-dta for example so the reel number of a link of rushes clips can be change by batch like in avid
I'm an Avid man...how do you do this in an Avid without accessing the actual clips in the Avid?
i have many clips in different projects that need to be updated.
This is why Assistant editors exists...to help out with the grunt work...or to just DO the grunt work. I did that for 5 years...
Shane

Similar Messages

Hi all! What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

Buying more hard drive space is a very valid option, here. Editing takes up lots of room, you should never discount the idea of adding more when you need it.
Another possibility is exporting to MXF OP1a using the AVC-I codec. It's not lossless, but it is Master quality. Plus the file size is a LOT smaller, so it may suit your needs.

My contacts all got deleted from my phone, and was replaced with names and numbers of people I've never met before.

My phone was working as normal, then all of a sudden when I checked my text messages all the names of my contacts got replaced by their actual phone numbers. When I checked my contacts, it looks like everyone got deleted from my phone, and was replaced with names and numbers of people I've never met before. Even when I check my icloud for a backup it has the same issue. I don't know how this is possible and not certain as to how to rectify and get my contacts back.

Hi Also iPhone, need update to ios 8.1.2 do this over WiFi Use same Apple ID & Password. Cheers Brian

Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. When I open the contact, I can only see 3 contact names and the rest of 4000 contacts are not listed

Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. However, when I open the contact, I can only see 3 contact names and the rest of 4000 plus contacts are not listed, and it makes you difficult to call through contact

The iPhone remembers information about previous contacts.
Complelely independently, you have a Contacts app with a contacts list. It sounds like your contacts list has 3 names on it. You need to add a few names.

Disappearing reel name and timecode

Ok, here's one for you:
batch capture from a list that has proper reel names and media start and end timecodes. Capture complete and the reel name disappears to be replaced with a blank space, and the timecode is set to zeros. Hmmm, the clip is there, plays fine, etc. But I lost all my references. This is also happening if I create a brand new event to capture live on the system by marking in and out points and then capturing.
N.B. -This list was imported from an excel file using a tab-delimited format. These are additions to a project I'm working on to rebuild an older project for recutting. I've been recapturing using GVG EDLs without issue. Then here's this little hand made list and the reel names and TCs vanish on me. Weird.
source is HDcam being captured in ProRes via HDSDI through a Kona3 card.
-the same tapes captured fine a couple weeks ago
-no system changes/updates other than a Camera Raw update
-Preferences for FCP have been trashed
-8 core MacPro running 10.6.4

Here you go, I think this is a pretty good fit:
http://web.mac.com/piero.fiorani/iWeb/PieroF%20FCE%20Effect/FCE%20Timecode%20Dis play.html
It does work fine in FCP. Place it on one clip, copy the clip, select all the other clips, and paste attributes (filters).

Blackberry help! Can I access media manager with a mac?

I just bought my pretty new blackberry yesterday and I already hate it Is it possible to use Media Manager with a mac? I'm using PocketMac but it doesn't give me the option of Media Manager. I'd like to be able to add music and pictures to my Blackberry. Let me know if this is possible!
TIA for any help!

You may want to look at the Missing Sync for Blackberry rather than Pocket Blackberry
http://www.markspace.com/missingsync_blackberry.php

Srvrmgr syntax: how can I create Named Subsystem with both Name and Description values?

In looking through bookshelf, there is no syntax discussed that allows you to include both the Name value and the Description value for a Named Subsystem/Profile Configuration. In the screenshot, the circled values were created with the server manager command-line.
In contrast, you can create a component definition with a Name (full name) and Description.
For CompDef, this works:
create component definition CompDefTest1_enu for component type AppObjMgr component group Fins run mode Interactive full name "Test Comp Def Test 1" description "Test 1 Object Manager CompDef"
For Named Subsytem, this does NOT work:
create named subsystem Test5 for subsystem EAITransportDataHandlingSubsys full name "Test 5" description 'Test 5 Description'
Can anyone tell me if, for a Named Subsytem, there is a proper syntax to include both the Name and Description values in the command-line, or is the only way to manually create it in the UI?

Hi,
I have reviewed the help for create command in srvrmgr, it does not give the full name and description as parameters for subsystem creation. However, as you indicated these parameters are available for component definition creation:
srvrmgr> help create
create { component group | compgrp } <component group name>
       [ full name <descriptive name> ]
       [ { description | desc } <description of component group> ]
create { component definition | compdef } <component definition name>
       for { component type | comptype } <component type name>
           { component group | compgrp } <component group name>
       run mode { batch | interactive | background }
       [ full name <descriptive name> ]
       [ { description | desc } <description of component definition> ]
       [ with [param <param_name>=<value>[, <param_name>=<value>...]]
              [fixparam <fixed_param_name>=<fixed_value>[,...]]]
create named subsystem <named_subsystem_name> for
       subsystem <subsystem_name> with <param_name>=<param_value> [, ..]
Bookshelf also has an example of subsystem creation that does not include full name and description:
http://docs.oracle.com/cd/E14004_01/books/StoreFwdMsg/StoreFwdMsg_InstallConfig14.html#wp1351472
In this case I suggest you to create a ticket on My Oracle Support to confirm that srvrmgr does not support creating a new subsystem with full name and description parameters, and request an enhancement request for these parameters to be included in create statement for new subsystems when using srvrmgr.
Hope it helps,
WSiebel

What are pin names and numbers rotated?

I copied an existing schematic symbol into my user data base, changed the part number and saved it. Then I placed the component into the schematic and the pin names and numbers were totally screwed up. All vertical names and numbers were rotated horizontal.
See the attached picture. On the left is the image shown in the "Select a Component" dialog. On the right is what I get when I place the component.
WYSINWYG!
How do I correct this, and is this going to happen every time I place a component with vertical labels?
Phil
Solved!
Go to Solution.
Attachments:
screwed up symbol.jpg ‏235 KB

The original component a FT 232DM, but this is no longer manufactured. The FT232BL is a pin for pin replacement. All I wanted to do was change the component name.
I copied the FT232DM from the schematic sheet into my User Database. Then I opened the component in the Symbol Editor, changed the name to FT232BL, and saved it into my User Database. What you see in the image posted earlier are the symbol as it appears in the Symbol Editor (left) and as it appears after I placed the FT232BL into the schematic.
I have solved the problem - I can't wait days and days for a Tech Support answer on a job with a short deadline.
I edited the component in Symbol Editor and changed pin rotation from Auto to horizontal or vertical as appropriate. Then when the part was placed in the schematic the vertical pin names and numbers appeared as they should.
It is very peculiar that the program displays the symbol one way in the Symbol Editor and then places it in the schematic with a different configuration. The way the user designs the part in the Symbol Editor is the way the part should be placed in the schematic.
Phil

HT1296 I am facing a problem with my iPhone 4. I applied the first syncing with outlook 2007 by choosing the "merge" option. At the end of the process, some contacts are correctly sync, but most are only sync with the names. Numbers are lost. Any suggesti

I am facing a problem with my iPhone 4. I applied the first syncing with outlook 2007 by choosing the "merge" option. At the end of the process, some contacts are correctly sync, but most are only sync with the names. Numbers are lost. Any suggestion?

I would love to do this as well. All I need is my calendar appts from outlook. Right now I am using google calendar sync, but I would like to move to the cloud and away from google. I find it hard to believe there isn't an option to do this.

I am trying to use siri. It was working earlier. Now when I ask it to call name and number it say, Siri keeps saying( SORRY SOMETHINGS GONE WRONG CAN YOU TRY AGAIN) I HAVE TRIED SEVERAL NAMES AND NUMBERS IN MY CONTACTS. What am I doing wrong or how can

I am trying to use siri, Siri keeps saying( SORRY SOMETHINGS GONE WRONG CAN YOU TRY AGAIN)
I HAVE TRIED SEVERAL NAMES AND NUMBERS IN MY CONTACTS.
What am I doing wrong or how can I correct it.

Siri Fix
Turn OFF Siri
Reset Network Settings
Turn ON Siri
Done
Steps:
Tap Settings App>General>Siri>Turn OFF
General>Reset, near bottom>Reset Network Settings
Tap Settings App>General>Siri>Turn ON
Done

How to read the data from a file in another computer with user name and password login

How to read read the data from a file in anohter computer which need to login with user name and password?

duplicate post: http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2061478
duplicate post: http://forums.ni.com/t5/LabVIEW/do-need-to-enter-the-user-name-and-password-when-TCP-ip/m-p/2061612
duplicate post http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2060682

Get the pc name with domain name and add it to my properties file using commands

i want to get the pc name with domain name and add it to my properties file using powershell .
sid

function Get-Environment{
[environment]|Get-Member -Static -MemberType Properties |
ForEach-Object{
if($_.Name -ne 'StackTrace'){
$v=[scriptblock]::Create("[environment]::$($_.Name)").Invoke()
New-Object PsCustomObject -Property ([ordered]@{Name=$_.Name;Value=$v[0]})
Get-Environment
Get-Environment | Out-String | Out-File environment.txt
¯\_(ツ)_/¯

Is it possible to enter events into a specific iCal calendar, then print a list of those events with the name and date on a single sheet?

Is it possible to enter events into a specific iCal calendar, then print a list of those events with the name and date on a single sheet? I don't need the calendar grid. I just want a list of events on a particular calendar, and their dates. Is that possible?

Not easily. Two possibilities:
1) If all the events have some common feature (eg you have included "XXX" in all the summaries), search for that feature then select and copy the found items at the bottom of the window. You can then paste them into TextEdit or a spreadsheet for printing
2) You could write an Applescript to locate the events and write them into a text file for printing.
The first one will probably give you what you want.

"File with specified name and version number already exists. Result code= -48." ...????

Recently I have been getting this error message when I try to record an audio track in Logic... "File with specified name and version number already exists. Result code = -48." WHAT IS THE PROBLEM?????? It's making me furious!

Hi
As the message says, there is a file at the recording directory that has the same name:
http://support.apple.com/kb/ht1618
Try changing the name of the track (this sets the filename in later versions of Logic 9
CCT

No event method with matching name and signature found on EventSet

Dear,
I have this error in the Problems view in Workshop (I'm using the Weblogic 9.2.1) :
No event method with matching name and signature found on EventSet: com.bea.control.TaskControl.Callback.
This error occurs sometimes when I put an event on a task in a process definition. Example, I have a process : Application.java, when I put the onReceptionCompleted control (receive) in my process, the error appears!
Thanks for your help,
Regards,
Mathieu

It is a problem with the drap & drop in Workshop (from the taskControl to the Process). Workshop automatically inserts a wrong eventSet instead of the good one from the generated task control !
See you,
Mathieu

Media management with reel names and numbers

Similar Messages

Maybe you are looking for