Media manager and windows media center

How do I set the Fios Media manager to stream content from the Windows media center to the TV? I was able to set up media manager on a Vista desktop. Would like to set it up on 64 bit new laptop that can be upgraded to windows 7. Please provide step by step instructions.

I do not think you can do this unless you can convert the Windows Media Center recording to a type of file which is supported by Verizon Media Manager. Media Center files have an extension of *.dvr-ms. Verizon Media Manager ONLY supports .avi, .wmv, .flv, 3gp/3g2, .mpg(non-mpeg 2 videos) and .mp4/m4v files. I have been meaning to try this as well, but have not yet.
Can anyone recommend a good and free video converter for this?
Blame MS for this... that is using a propriety video format...
Let us know if successful.
-oceanx

Similar Messages

VCAST Media Manager and ENV 3

OK, I always used the desktop Media manager to get my pictures off my phone, now I have a new computer and it doesn't work. I tried reinstalling it many times (yes I have the device drivers) and it no longer brings up my phone in order for me to transfer my photos. It shows FB, and all other options to transfer but note my phone which used to show up right away once I plugged it in. I am unsing windows 7 but I also tired doing it on my XP machine but still it does not recognize my phone after I connect it, help! I have all these pics on my phone that I can't get to my pc.

I always used the desktop Media manager to get my pictures off my phone, now I have a new computer and it doesn't work. I tried reinstalling it many times (yes I have the device drivers) and it no longer brings up my phone in order for me to transfer my photos. It shows FB, and all other options to transfer but note my phone which used to show up right away once I plugged it in. I am using windows 7 but I also tired doing it on my XP machine but still it does not recognize my phone after I connect it, help! I have all these pics on my phone that I can't get to my pc.
VCAST Media Manager and ENV 3
Options
06-22-2011 10:10 AM
Goldie11 wrote:
OK, I always used the desktop Media manager to get my pictures off my phone, now I have a new computer and it doesn't work. I tried reinstalling it many times (yes I have the device drivers) and it no longer brings up my phone in order for me to transfer my photos. It shows FB, and all other options to transfer but note my phone which used to show up right away once I plugged it in. I am unsing windows 7 but I also tired doing it on my XP machine but still it does not recognize my phone after I connect it, help! I have all these pics on my phone that I can't get to my pc.
Thank you Goldie11 for your reply. Adding to what was said, I wish to point out that you double posted on the same issue a minute of each other putting the word Ok at the start of your sentence as the only difference between the posts. The reason why this was pointed out is because one posting would be sufficient. Many postings of the same issue exact issue does not get more attention than a single posting where as a double posting can cause confusion. In stating you always have used a desktop Media manager to get my pictures off your phone, What Windows operating system were you using at that time it worked to get the pictures off your device? Please check to see if you enabled the menu for Mass Storage on your device.
The USB Mass Storage menu allows you to transfer content from your phone via Windows XP when your phone is connected to your computer using a Micro Sd card inserted in your phone and with a compatible USB cable. When you have the Micro Sd card inserted in your phone, use the steps below to enable the menu for Mass Storage. I am also providing a link to our website that can also provide additional troubleshooting steps. The link is: http://support.vzw.com/clc/devices/index.html
Using the Internal Keypad:
1. Open the flip and press[MENU].
2. Press Settings & Tools.
3. Press Tools.
4. Press USB Mass Storage. From there you can enable the Mass Storage to then transfer your pictures from the phone to your computer.
Please note: Do not insert or remove the Micro Sd card while playing,deleting or downloading Pictures/Videos/Music/Sounds.

CoreCentre and Windows Media Player 9

I have a problem with CoreCentre and Windows Media Player 9. When CoreCentre is running, the CD drive stops and starts when I am playing an audio CD with Media Player 9. If I use any other Cd audio player (eg Creative Mediasource Player) it does not happen. I like to use Windows Media Player 9 (I am probably one of the few) but do not wish to turn off CoreCentre.
Can you help me please. I have asked MSI support staff with no luck and also Microsoft Support (They suggested I go into Safe Mode and see if it still happens - of course it doesn't - I am in Safe Mode! - nothing works!!!).
I am running Windows XP Pro SP1 with 865Pe Neo2 board, 1GB DDR3200 RAM and Pentium 4 3.0 GHz.
Sheryl

Well first of all get out of "safe mode"...It's no fun in there ...No really, I can believe that you are not the only one that this happens to ...You have to understand that "CORE-CENTER" is a resource hog!!..As it has to be in order to give you that critical info in "real-time"..So I take it that this prob. only happens when you are running the CD or DVD programs?...Do you have your DRAM Voltage set to 2.7 Volts?..As this always seems to help on these MO-BO'S (i865-i875)...And if that does'nt work why not just close down "CORE-CENTER?..Until you are finnished with you CD'S ..Sean REILLY875

Which Code of avi can play in QT Pro and Window Media Player?

Which Code of avi also can play in QT Pro and Window Media Player?

Nevermind ... not that simple apparently. I managed to get one of the avi's in the CS5 project created automatically when opening the original CS4 project to show the entire contents but can't replicate the behavior to another project using the same avi. Here are the media start, end, duration and video in, out duration values for the file. Viewing the avi in the source monitor I can see the full 16+ minutes. Odd disconnect between the 2 sets of values.
Any idea would be great!
Thanks,
Lee

Problems with Ipod and Windows Media Player PLEASE HELP

Ok i am not sure if this is the correct forum or not but i am having a problem. I have a Windows computer (Yes a windows computer please dont everyone yell at me) and i have a new ipod 30 gig video. Ok well when i put itunes on it changes all my music on my computer gets changed to AAC format and i cannot play music in windows media player. Ok well that is not my big issue. I make videos for church using windows movie maker and i cannot import music because nothing windows can recognize Itunes format which is AAC. well is there anyway so i can use itunes and still use WIndows Media Player and Windows Movie Maker... Any info will be greatly appreciated. THANKS ALL

I believe Quicktime Pro (which is available for Windoze) is capable of opening any WMP files and then you just export it as iPod format. That is how I get video onto the iPod. The Music and Videos all can be placed onto your iPod through iTunes.
So, if you are creating videos in your program, and want them on your iPod, then that is how you can do it.
Videos on your iPod have nothing to do with the formatting of your music. But, as the earlier post stated, change your prefs in iTunes to import as MP3. But, your videos HAVE to be in MP4 or M4V format to work on the iPod.
Good luck... and I'm a j3susfreak too

IPod and Windows Media Player

ok Im new to this iPod thing... i wanted to know if you can upload songs to your iPod with Windows Media Player?? without the iTunes.... PLEASE TELL ME =[
DELL Windows XP

Windows Media Player does not support syncing with any of the iPod line of players. You can read more on this page: iPod and Windows Media Player 10

Zen Vision M and Windows Media Player 11 SOLUT

Ok this is for all of you that have Windows Media Player (WMP ) and can't get your album art to be displayed.
Go here
Support (You will see this near the top of your screen in the orange bar)
2 Software AutoUpdate
3 Accept (this will only work I you player is connected tour computer)
4 You will now be told what device you have connected on your computer
5 Check Update (this may take a couple of minute even with broadband)
And Download this
[size="">5. Creative Media Explorer Update for Creative ZEN Vision:M? (4.49 MB)?? 29 Nov 06????? Download Now[/b]
[size="">This update resolves compatibility issues between Creative Media Explorer or Creative MediaSource? Player/Organizer, and Windows Media? Player (WMP). For more details, read the rest of this web release note.
This update has rectified the problem for me If these steps do not work for you try looking for the download direct by doing the following
Support (You will see this near the top of your screen in the orange bar)
2 Downloads (Follow the steps to select the product YOU have)
3 Select YOUR Language and YOUR Operating System, leave file types set to All
4 Click Go
5 Download Patch
I have the latest Firmware installed (found it easiest to do using the Software AutoUpdate section of the website) even installed with WMP on my pc.
Also I updated my creative media explorer, which allowed me to convert more video files from the same place. I found this really usefull.
I have?NOT had the problem of my player not being recognised when connected to my pc and unfortunately I do not know how to solve that problem, sorry, hope some one else can help you with that.

Well I figured it out. Turns out if you go to Sync(little down arrow)>DEVICE_NAME>Advanced Options>Quality if you leave it on automatic it will transfer wav files, but if you change it (I did without knowing) then the highest quality you're going to get is 92 WMA.

Desktop Manager and Roxio Media Manager Soooo Slow

Desktop Manager and Roxio Media Manager are so slow. Why? Just getting them to open takes five minutes or more.

I'm glad I found this thread.
I loaded the Desktop Manager and Roxio Media Manager 2 days ago. It completely crippled my laptop (running Vista, 4GB RAM etc), which previously ran very well.
I suspected it was Roxio when I watched it take 20 minutes to install.
Worringly, my laptop was crippled without the Desktop or Roxio software being used. The response rate was once every 5 minutes, and when eventually getting to the Task Manager and looking at the Processes and Applications (a 15 minute job!), there was nothing untoward.
Having uninstalled them and rebooted, the laptop is back to its former glory so quite what Roxio was doing in the background, I have no idea. I won't be touching it again.
Matt
Message Edited by mjsulliva on 04-03-2009 05:13 AM

Creative media centre and windows 7

Ive just had an upgrade to windows 7 and have reinstalled my creative zen. The installation was no problem but now when i click on the desktop icon then click browse media it opens windows media player instead of the creative media centre. The whole interface has changed and i cant find how to add media at all now, with the old creative centre it was simple you just clicked add media. Not being well up on this stuff i was wondering why i cant accsess the media centre i had with xp, any advice would be most welcome. Thanks very much.

'Hi... I too have a nice old X-Fi and a new PC with Win7Pro. I haven't tried to install the old software on it yet but I have my doubts. I tried to click on the link you posted for the other guy but it took me to a products page.
I already tried accessing Contact Us but it wanted the date I bought my player, etc., and I've had it for years and don't feel like spending time looking for the receipt, etc. I just want to add some new CDs to my music library and then my X-Fi. Thanks.

ATI Catalyst Install Manager and catalyst Control Center Help

I just run the Windows 7 Upgrade
advisor report and it said that I should uninstall the ATI Catalyst Install Manager and Catalyst Control Center then reinstall after upgrade..
Could someone direct me where I might t find these programs for Windows 7

You must not do this. Just continue upgrade installation.
On my Satellite I got the same message but I have simply continued with upgrade.
At the end everything went fine.

Fx5200-td128 no image in any media players (windvd - windows media player) on tv-out

i get a bunch of lines going upwards on my tv always but i still get a proper display...problem is when i play any sort of media (dvd-mpg-avi) in any media player (windvd-windows media player-ect) all the screens display shows up on the tv exept the movie sequence please help

i tried the latest drivers i tried all resolutions and still nothing....sometimes when i initiate the clone mode when the display appears on my tv it's only black and white...yet still no display in media players on my tv

Transfer Nokia Media file to Windows Media player

Hi, i am giving a lecture and the took the footage i need to show on my 6220, the problem is my system at work doen't support nokia media player and i am not able to load it. How can i transfer the nokia media file into something i can view on windows media player?

Windows Media Player doesn't support MP4 files at all.
You can buy a Codec pack to enable this support. Visit Windpows Media Player pages.
OR
You can covert the files to play them in Windows Media Player.
If you want to convert the files. There are thousands of encoders you can buy or that are free, I've stopped making recommendations because people think that I get money for making them.
So just google VIDEO encoder, and you will find a TON of them.
If you're interested in what I use visit the blog in my signature.
640K Should be enough for everybody
El_Loco Nokia Video Blog

RDS 2012 R2 - How do I lockdown access to Local Computer Management and Windows Backup via Group Policy

Greetings all,
I am needing assistance in how to lockdown access to Local Computer Management and Windows Backup via Group Policy for users that access RDS service. I have followed this awesome guide - h t t p://w w w.it.ltsoy.com/windows/lock-down-remote-desktop-services-server-2012/
- but it is missing two important resources that I would like to lock down.Currently, I have successfully locked down Control Panel for users via Group Policy, but I cannot find any group policy or guide on how to restrict user access
to Computer Management (different to Server Manager). When using Win-X shortcut to open the 'Administrator's shortcuts' near the windows icon, I have locked down everything except Computer Management. Computer Management gives direct access to Disk Management,
Shares etc, which are locked down for users. But Windows Server Backup is still accessible. Can someone please guide me on how to restrict access to both Computer Management and Windows Server Backup.
Thanks in advance.
Terry.

Prevent running of Windows Server Backup
Computer Configuration\Policies\Windows Settings\Security Settings\File System
Right click on File System - Add File - Drill down to \System32\wbadmin.msc
On the Database Security ACL that pops up - Remove Creator Owner, Remove Users and check Adminstrators have Full Access.
On the Object window - choose Propagate inheritable permissions to all... (Default)

Finding the explanation of all entries of the Windows Boot Manager and Windows Boot Loader sections

Hi
Where can I find the explanation of all entries of the Windows Boot Manager and Windows Boot Loader sections that appear when I write the /store /v options of bcdedit command?
Thanks
Bye
Balubeto

All the BCEDIT command line options are described here:
https://technet.microsoft.com/en-us/library/cc709667%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
Jerry
Actually, I wanted to find the explanation of all entries (as inherit or
device or osdevice) of the Windows Boot Manager and Windows Boot Loader sections
that appear when I write the /store /v options of bcdedit command?
Thanks
Bye
Balubeto

Integration between Soluiotn Manager and HP Quality Center

Hi Folks,
I am currently configuring the integration between Solution Manager and HP Quality Center, and during the set up of communication user, I get the following error:
User hpqc_comm is not authorized to access projects
Message no. QC_INTEGRATION016
Diagnosis
You want to access projects in the Quality Center with the communication user hpqc_comm. This causes an error because the user either does not exist in the Quality Center or is not assigned to any project.
Procedure
Check whether the user hpqc_comm is in the Quality Center, and whether it is assigned to at least one project. Ask the Quality Center administrator to create the user and assign it to projects, if necessary.
You can use another user for the communication
Well, I have created that user in HPQC and assigned it to projects.
Thanks for your help
Marco

the error is in Solution Manager. I am defining the communication parameters in SOLAR_PROJECT_ADMIN / <selected project> / edit / Connection to HP Quality Center. I choose the corresponding project in Quality Center, but when I validate the screen, I get the error I mentioned before, even though the communication user exists in HPQC and is assigned to that specific project.
Thanks for your reply.
Marco

Media manager and windows media center

Similar Messages

Maybe you are looking for