MEDIA MANAGER ISSUE

I am having problems opening the media manager. When I select a sequence nothing happens. When I highlight the clips in the sequence I receive a general error. I am only able to open the manager when I select the captured clips in the browser one at a time or a few clips in a sequence. Is there a way to backup media for an entire project without having to do it a few clips at a time?

I figured it out. I continued to get a general error message when trying to use the media manager on several sequences and clips. When selecting "make sequence clips independant" I was able to use the manager. Go figure

Similar Messages

  • MEDIA MANAGER ISSUES?? PLEASE READ BEFORE POSTING

    We have created several Media Manager specific threads for your issues that are "stickied" at the top of this board.  These are :
    Media Manager Installation Issues
    Media Manager Design Issues
    Media Manager Audio Playback Issues
    Media Manager Video Playback Issues
    Media Manager General (Other) Issues
    Please post your Media Manager issues in the correct corresponding thread so that our FSC employees can identify and begin to resolve some of the problems being experienced by our Media Manager customers.
    Thank You!!
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

    I can understand your point of view and I respect it in regards to Small Basic being a learning language. None the less, let me make a suggestion that would be more ageeable, I think,  to different kinds of people. Why not make different versions
    of this new language: version 1 for beginners that I heard would be out by the end of this year,
    version 2 for intermediates and version 3 for more advanced programmers. All this would culminate to the Visual Basic language. These 3 versions would smoothe out the gap between SB and Visual Basic. Your new programmers would
    evolve at the same time your versions would come out and Microsoft would have a long term policy of loyal programmers. 

  • Vcast media manager issue

    I downloaded the Vcast media manager for my XP desktop and was able to get songs loaded. But now when I start the program it says there is an update but it fails to download it and then Vcast closes.
    I unloaded Vcast and downloaded the latest version but it still shows the same problem.
    Any one else see this or know the solution?

    I would call customer service and see if they can see an issue on their end...and at least make a note that you never received the download.

  • Premiere Pro CS6: Media Manager Issue

    I can´t use Premiere Pro CS6 media manager. It begin analyze project but then come couple error messages. All my graphics files are .psd, all my video files are 4K .r3d and all audio is .wav files. Does Adobe team trying to solve this problem already? Below are links to the screen capture images about issue.
    https://www.dropbox.com/s/qbnj7ctnzir21hn/premire_CS6_error.png
    Dropbox - premire_CS6_error#.png

    I would recommend doing all your file work with a proper file manager, like Finder.

  • IPad and Media Manager Issues

    I just installed the Verizon Media Manager App on my iPad and it will not pull anything from my pc.  It keeps telling me to register.  It lets me sign in with my id, lets me bookmark things, but I cannot pull media from my PC.  It is very frustrating.  Want to be able to view flex view stuff for the kids while on the road and cannot.  Also cannot find the fios on demand app in the App store.  Please help.  The other app that is not working at all is the MY VZ account app.  I cannot check bills, pay bills, check email or anything you should be able to do with it.  If the app's are buggy, pull them.  Please advise with any solutions.

    Here's the master page for all of Verizon's apps. Right now only the Media Manager app is available for iPad.
    In order to view your personal media, it must first be uploaded to your FlexView Library. This can be done using the Media Manager application on your PC or Mac.
    The Media Manager iPad app also allows you to stream Flex View movies and TV shows you have purchased from Verizon, whether you bought it on your set-top-box, PC or phone. In other words, it also serves as the FiOS On Demand app.

  • Media Manage Issues with Premiere CS6

    My Premiere CS6 seems to have trouble media managing entire 30 minute shows.  I have tried a number of different options.  I have made new sequences with individual segments that are smaller, new projects and reducing the size of photos in the sequence just to name a few.  Each one ends with the same error message and a Premiere CS6 crash.  Does anyone have any other solutions? 

    That would work for saving all video but what about tranistions, color, audio filters?  Also media managing my projects saves a lot of space on my computer by eliminiting the video I dont use.  My stock video is saved to a back up drive.  I would like to be able to open up a media manage in the future if need be and make adjustments and re export.  Sometimes clients ask for small changes.  I have media managed every single one of my projects up to this point, this problem just recently came about.  So I know it can work and it does.  I just dont know why it doesnt work properly anymore.

  • Another media manager issue

    Has anyone used the recompress option to convert the project to H.264 or MPEG4??? What I found was that if you choose the DV codec, the OfflineRT, or any other presets in the pulldown list, it works. But if you choose custom and select a codec that is not listed in the presets such as MPEG4 and H.264, it reports a "general error". I can't seem to figure it out but I do need to send a rather large project to someone via DVD or DVDs. Any help is appreciated.

    I wouldn't do what you're trying to do.
    Are you trying to send them a completed show? Export to QuickTime then use Compressor to get to H.264 or MPEG4.
    But if you're simply sending someone else your PROJECT, as in the project file and the media it uses, then what you're doing (if it worked) will kill the media quality. Keep the codec the same as your media is now, media manage the sequence to a location then start copying the files in that location to DVD. Use Apple's Backup program for example.

  • Media Manager - Images tranferred - Displays a red X

    Have 8703e BB. Have Internet Services turned off directly by Sprint - don't need it and do not want to be charged for the non-communication Casual Data Usage (a slick illegal method cell phone companies charge when internet services are turned off - had to file federal charges before they took it off my bill). Can't download ringtones or pictures.
    Tried to transfer ringtones and images a while ago and Media Manager would not recognize my device. Finally found out that without an external card, the Media Manager would not recognize my device.
    However, just installed the new OS and Desktop Manager 4.2.2.14 with Media Manager and it recognizes my device! 
    I transferred a ringtone from my PC to my device and...YES...Viva La Vida plays!!!!
    BUT, two images I transferred show up with a generic image thumbnail and the picture displayed is just a small red X in the upper left hand corner. Yet, when I highlight the folder in the device in Media Manager, the pictures display very clearly.
    To also clarify, the pictures reside in MEDIA>PICTURES>DEVICE MEMORY
    Under properties for the folder, the file path is - /Device Memory/home/user/pictures
    The sizes of the pictures are 37KB and 65KB, hardly any different than the images in the Preloaded Pictures folder, which path is /Device Memory/samples/pictures
    Is this a BB issue or Media Manager issue? As I said, the ringtone transferred and works, the images transferred and are listed, but don't display. Anyone have a solution to this problem?
    I've reset the device by taking the battery out, etc. Nothing. Pictures still give me the red x.
    Thanks,
    Dan

    Ok, so this has been driving me nuts for such a long time. I did everything that anyone suggested and nothing worked. This included creating a new temp internet files folder, checking and unchecking all the appropriate boxes, creating a new profile, and
    most other things suggested. Then I cam across something on a forum (sorry I don't know the link) that made me think. I looked through the reg to the key HKCU>Software>Microsoft>Office>15.0
    (I use outlook 2013 but previous versions of office were there as well.)>Outlook>Security>OutlookSecureTempFolder. My setting was C:\Users\"USER"\AppData\Local\Microsoft\Windows\TIF\Temporary Internet Files\Content.Outlook\B5U77NH4\.
    NOTE: TIF is where I chose to create the new Temporary Internet Files folder. Ur most likely will be different or not there at all!!!
    What I realized was that the last folder in this setting was different that the actual folder on my harddrive. So I edited just the last folder B5U77NH4 to be the same as the folder on my HDD. WALA this worked and works great currently. All the other fixes
    sometimes worked for a short while but always reverted back.  I do have to say though that prior to doing this I went into Internet Options and deleted all the browsing history. EVERYTHING it sucked for freq visited websites but I wanted to start fresh.
    Then I physically selected every item that was still in my Temp Internet files folder, even B5U77NH4 and manually deleted every item. That way any folder that was created dynamically would be gone. What was left and would not delete was B5U77NH4 so that is
    the folder I chose to copy into the registry.
    ]This has been so frustrating but now it seems to work. I hope this helps.

  • Media Manager & Digital Desktop Display

    Hi,
    I've captured HDV footage to ProRes and all that is ok. I wanted to use Media Manager to recompress to a lower bit rate format for mobile editing. All that is fine, too.
    The problem I'm having is when I'm editing with the new (recompressed footage) and using the digital cinema desktop display:
    When I use preset formats from the media manager list, the digital cinema desktop function works fine. When I create a custom setting in the media manager (recompressing) the digital cinema desktop display function stays still on the first frame and only changes when I stop it (and it changes to the frame where I stopped).
    Any solution or ideas are welcome.
    Thanks,
    Matt

    Thanks for the answer.
    Well, after much experimenting with workflow (some time ago) I had decided upon always capturing to ProRes from the camera. My system seems to work smoother (therefore I work faster) with the ProRes than with the HDV.
    In any case, it was near identical.
    In this case, what I really need is to create two sets of media. I need something very small and portable for this edit, while keeping the ProRes (or original HDV) on my main computer for when I'm there.
    I just get better results (higher quality with a lower bit rate) when I do custom settings in Media Manager, but then the digital cinema desktop display stops working.
    Thanks for the input, but this media manager issue is my real problem.
    Cool,
    Matt

  • Media Manager won't display/transfer images from the Blackberry

    Recently two workstaions have had their media manager stop working. When the blackberry is hooked up to the PC and viewed in Media Manager, the images on the blackberry come up as gray with a tiny strip of image pixels at the very top. When the images are transfered to the PC they hold on to this. When the images are emailed from the blackberry to the PC the images come across just fine.
    We have reinstalled to no avail.
    Workstations are XP 2 with all service packs except SP 3. Blackberry desktop 4.3
    Message Edited by sinecure on 07-03-2008 04:42 PM
    Solved!
    Go to Solution.

    Had the same issues. We're in crackberry purgatory.  This is what I had to do and it works fine now.
    delete the current version of blackberry desktop manager from your computer (roxio is junk)
    go to blackberry website and go to downloads
    download desktop manager version 4.2.1 (last most reliabe version for folks with current media manager issues)
    From there I had to connect the blackberry via usb
    open my pictures and in another window go to my computer and open the blackberry
    drag and drop the pics you want from my pictures to the blackberry.
    Worked with no problems and it was super fast. Pics show up great.
    Hope it helps.

  • Problems with Media Manager

    Everytime I try so run Media Manager it immediately pops up an error message then shuts down...I have installed the program and reinstalled it but I still get the error message. In the beginning, I was able to use this program with no problems, now..Crash..Can someone send me in the rite direction to resolve this problem Please...Thx for any input.

    Sorry to hear about your Media Manager issues.
    Please go to https://www22.verizon.com/content/ContactUs/ and contact Verizon for support. The live chat option will be active after a few moments, as the page finishes loading. All other contact options are listed as well.
    Thanks.
    Doug

  • Media Manager - offline to online issue

    Hope someone can help with this issue.
    first for reference here is my work flow.
    I copy the timeline sent from my client into a new project. from there I media manage the timeline to create an offline so that I can conform the show in hd.
    The problem I am having is that on some reels for example there are 10 clips to capture but when I go to capture them fcp tells me that there are 20 clips to capture. This is adding time to my conform.
    Has anyone else had this issue? And is there something I'm doing wrong or could do to correct the issue?
    Regards;
    Rocky

    You'll need to give more information.
    What makes you think there are only 10 clips?
    Do you count the cideoclips only? Are there maybe cuts in the audio that you need to take in account?
    Did you check the Reelnumbers in the browser columns?: Are there clips of which you think they come from different reels, but in the browser thay accidently have the same reel name?
    Is it always 2 times the amount you expected. (You said 10 becomes 20. Is this always doubled, or is it sometimes 10 clips become 18? or 23?)
    If the former, then you might have your system settings set to capture Audio and Video to different files, which will double the amount of Captured clips from the masterclips
    Rienk

  • Media Manager Back Up Issue

    Hi,
    I have nearly finished project: a 30 minute documentary and 4 short variants (DV PAL) that I want to create a full media back up on a 1TB Lacie firewire drive to take off site in case of the worst possible scenario over Christmas and New Year and our offices flood/have a fire (hope I'm not tempting fate here...)
    I created a new sequence and edited all four sequences into this one new sequence. I did this, because some of the short films use most of the same media as used in the main film, and I didn't want to duplicate the media unnecessarily by using the MM to copy each sequence separately. I have given the duplicated items 1:00:00 handles.
    My first question is, is my strategy the best way of doing this? I don't have room to duplicate all the media, which is sitting on several different drives (70 one hour DV tapes were digitised to create this project). I don't have any other digital media back up at present - only the original tapes - although I back up the .fcp files each day on top of autosaves on different drives.
    Whilst the sequence was copying through the MM, a drive became disconnected and FCP locked up. I had to force quit and wonder (assuming the above strategy is OK) whether I have to start the whole process again ditching what I've already copied, even though half the back up MM project is already there on my 1TB drive. I can't think of a way I can export using the media manager from 'where I left off'.
    Any help gratefully received.
    Cheers,
    Ant

    I've tried all the available options, including archive and install and then erase and install, however, when I tried to erase got the following message:
    'volume erase failed: could not unmount disk'
    I have tried unmounting in disk utility to no avail. Does anybody have any suggestions or should I visit the apple store ( I have no protection plan)?
    Is the hard drive shot, even though I was able to access it in target mode to drag and drop my user folders on to an external hd?

  • Media Manager does not work

    I have an 8700C.  I installed Blackberry Desktop Manager V4.6.0.12 and I have V4.2.1.96 (Platform 2.3.0.79) OS installed on my device.  When I go into the Media icon in Desktop Manager I have a split screen with Media Manager on the left and Blackberry Media Sync on the right.  The Start button for Media Manager is grayed out.  I installed Media Sync, was told to install iTunes, and then told my device is not supported for Media Sync.  I have not been able to get Media manager to work since Desktop Manager version 4.1 or 4.2. 

    Hi and welcome to the forums,
    I would recommend doing a clean uninstall of the DN v.6 with Media Manager,using the following:
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...
     Reboot the PC, and download and install  DM 4.6 without the media manager. If you search the forums you will see that media manager is not very stable. Personally I use the drag and drop method through Windows (must have media card installed,) very quick and efficient.
    Media sync is compatible with your phone and can be downloaded as a separate program here:
    http://na.blackberry.com/eng/devices/features/media/mediasync.jsp
    Media sync does work well with your music management. However, Itunes with DRM are not able to be transferred to the Blackberry.
    Please let me know if you need any assistance!
    Thanks
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Where is the Media Manager in Desktop 6.0.0.40 ??????

    Last night the BlackBerry Desktop Manager wanted to do an update.  I've done these updates in the past so I thought it would be safe.
    This new version - 6.0.0.40 (Released August 3, 2010 Bundle 42) does not have the Roxio Media manager.  I have to be able to copy files between the BlackBerry file system and my PC.  Not just from the music, pictures and video directories.  I have files in other locations of the file system for my application.
      Paul

      I too had the same problem not being able to access any of my files in device memory after upgrading to DM6. Mass storage device is turned on.  I posted this issue on Aug 12 with no reply from RIM/BB with a fix.  I therefore was forced to reinstall DM5 with Roxio Media Manager and can once again access all my files on my device and move them around.  Now I have two DM'S running on my desktop.  As I stated in my post, I'm not impressed with DM6 at all!  Why release something that doesn't work? In my opinion it's a downgrade! 

Maybe you are looking for