Media Manager SUCKS! Help

Ok so i've had my 8300 Curve for sometime now. I have a Windows xp 2gig ram and a P3 processer. I have a really decent computer that does pretty much everything.
HOWEVER! When i load up my Desktop Manager and click on Media Manager.... Media Manager runs EXTREMELY SLOW often freezing and i have to pull up task manager to exit it. Sometimes i get lucky and i'm able to throw some music or pictures on my phone before it goes retarded. I new as soon as i bought the phone and installed the software and saw the name Roxio i was in for it. I hate Roxio everything. 
Does anyone have any tips on improving performance with Media Manager?
Solved!
Go to Solution.

What version of the Desktop Manager are you using? If not using 4.6, uninstall of the version you have currently installed using this prodedure: http://www.blackberry.com/btsc/KB02206. Afterwards download 4.6 from here: https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
There's two options to choose from, with or without Media Manager. If you choose to try media manager again you may run into the same problem (can do a search on the boards for media manager to find out more infomation about that if you choose)
Regardless of which version of the Desktop Manager you choose it's recommended to buy a microSD card to store your media files on, so you don't run out of memory on your device.
Depending on what OS your BlackBerry is tells you what size microSD card you can buy. You can check under Options | About (will be listed as v4.xx.xxx). Look at the chart at the following link to see what size you can obtain - http://www.blackberry.com/btsc/KB05461
On the BlackBerry go into Options | Media Card. Recommended media settings are as follows:
Media Card support : ON
Encryption Mode : NONE
Mass Storage Support : ON
Auto Enable Mass Storage Mode When Connected : YES
Mass Storage mode allows your BlackBerry to act as an extra drive when connected to your PC. So it will show up as an extra drive letter in Windows Explorer. So you don't need the Desktop Manager media manager version if you choose to go with this method because you can just drag/drop media files onto your media card
Hope this helps
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Similar Messages

  • New V Cast Media Manager SUCKS!

    I was recently "forced" to update the older version of Media Manager to V1.1 build 11, which SUCKS!  I don't wnat nor need all the accessories like YouTube, Flicker or PhotoBucket!  I use to be able to just connect my phone to the USB cable and upload or sync pictures without going into Settings > Tools...  In fact, I use to be able to still use the LG Env3 phone while moving pictures around, I could text and even talk on the phone while connected via USB. 
    The new Media Manager makes you go into Settings > Tools in order to move pics from phone to PC or PC to phone.
    I want my old version back!!!  Or at least can anyone suggest another application that I can use to just move images back & forth without loosing the use of my phone?

    mgfranz wrote:
    Personally, I wouldn't take the chance of pulling the card out and putting it back in without powering off the phone, granted it's solid state, but would you remove your hard-drive from your computer without shutting it off? It's not quite the same - you don't shut off the computer to read the card, so why would you shut off the phone to do the same?  It's not storing the OS or system files, only things I've specifically placed on the card, so it's more like hot swapping an external hard drive rather than the internal.  But that's just ME...     But that's just me.
    I just want my old Media Manager back...  The new interface with all the web sites listed is junk.  And I don't have an answer for that one . . . sorry 

  • Roxio Media Manager - Remove It.

    I have the current version of Desktop Manager (V.5.0.0.11) installed on my Windows XP desktop.
    "Roxio Media Manager" slows down my computer, especially my Microsoft Office
    97 Word & Excel programs.
    How do I remove only the Roxio Media Manager component of the Desktop Manager.
    Thanks !! 

    Open Windows Control Panel then launch Add/Remove Programs. Double click "BlackBerry Desktop Software", the install wizard should open up. From there click Next, then Modify, then continue until you reach the Media Options screen. Deselect Media Manager and continue to the end. This should uninstall Media Manager.
    ...and I agree Roxio Media Manager sucks.

  • Simple ? Media manager - create ringtones ?

    Excuse me if this is obvious, I've only have my blackberry curve a month or so, and finding that the doc - included and online isn't always accurate  :{
    anyway, finally getting enough basics figured out that I wanted to create some ring tones:
    In media manager the help says all you need to do is right click on an audio file and then select "edit with quick sound editor"
    only there is no option to that effect - so what do I do now ?
    Also with thousands of songs already on my pc (windows xp if that is an issue) there seems to be some selections that send media manager off the deep end trying to index all the songs or such - cpu usage jumps up to 50+ percent and stays there - literally for hours
    (I left it during diner) before I just killed it in task manger.
    any advice or recomendations would be appreciated.
    Thanks
    -Gus

    Hi ans welcome to the forums,
    Media manager is not a very stable program, Most users down't use it
    Are you usig iTunes? They are DRM protected and will not work in the media manager of blackberry.
    There are programs you can google to strip that protection. Also, there are apps that will allow you to
    cut your songs to ringtomes for free.
    If you need more information, please ask!
    If not, please resolve the post using the options by the kudos’ star
    Just check the post that had your answer!
    Thanks 
    Message Edited by Bifocals on 10-18-2008 01:14 PM
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • HELP WITH FASCINATE AND MEDIA MANAGER

    TRYING TO RUN VZ MEDIA MANAGER WITH FASCINATE TO TRANSFER PICTURES FROM PHONE TO PC BUT THE MEDIA MANAGER SAYS IT MUST SHUT DOWN BUT I CAN STILL USE PROGRAM WITH ERROR MESSAGE UP. WENT THROUGH ALL THE TRANSFER STEPS SAYS PICS WERE TRANSFERRED BUT NOTHING IS THERE ANY IDEAS

    Don't use vz mm. It sucks. Make sure you mount your phone/card right. Connect usb cable to phone and the other to a usb port on your cp. Pull down notification bar from the top of the phone screen, select to transfer, mount phone. Then just drag and drop or copy and paste. I ended up deleting the mm because it's slow, doesn't really work and imo is just an attempt towards win mp. Hope this helps!

  • Media Manager help!!

    I want to create independent media files from subclips in my FCP project with Media Manager.
    Since I did not understand this process in the beginning I have logged and filed all the subclips in a variety of bins regardless of there master clip origins. I then cleared any subclips that I knew that I wasn’t going to use at all.
    Is the only way to do this Media Manager process now to delete all the master clips at once and then choose all the subclips at once and ask Media Manager to create new media files for each subclip thus deleting any subclip material that I cleared?
    Is there a way to do this one master clip at a time? I have about 30 hours of total material and am nervous about doing this all at once. Plus I am almost out of room and need to capture more video.
    Thank you for any help in this matter.

    Media Manager is a sleazy non-feature. It works but it's indecipherable
    Try this:
    Create a new project. Capture two or three clips in the same way you did the originals and use MM on those till you get the hang of it.
    You will be able to do what you want to do. The MM section in the manual is quite long, I can't possibly make it any shorter.
    There's a section on Media Manager at kenstone.net, too.
    You can do it. However, I strongly urge you to borrow or steal an external FW drive.
    bogiesan

  • Blackberry help! Can I access media manager with a mac?

    I just bought my pretty new blackberry yesterday and I already hate it Is it possible to use Media Manager with a mac? I'm using PocketMac but it doesn't give me the option of Media Manager. I'd like to be able to add music and pictures to my Blackberry. Let me know if this is possible!
    TIA for any help!

    You may want to look at the Missing Sync for Blackberry rather than Pocket Blackberry
    http://www.markspace.com/missingsync_blackberry.php

  • Emergency help needed re media manager

    Hi all,
    Hopefully somebody can help me with this.
    I am due to start an audio mix on a project for a client tomorrow. He currently has the FCP project on his Mac Pro but due to recording to a tascam portable recorder on set all his audio files are called audio1, audio2 etc. He has a folders on his drive with each days recordings so there are many folders which all contain files called audio1 etc.
    I asked him to put his picture lock sequence onto an external drive using media manager but it doesn't seem to able to handle the audio files since there are so many with the same name from different folders so the external now has only one file with each name where on the picture lock sequence there are many audio clips called audio1 for example.
    I hope this makes sense.
    Please post here if you can help me.
    Thanks in advance
    Michael

    If you have a media card in your BlackBerry then the easier way to transfer items to it is to just click on the My Computer icon and drag and drop them to the appropriate folder. Music to the \blackberry\music folder and so on. As for the problem with the Media manager, it should be remedied by installing the OS for your device to your computer.
    Message Edited by tschweitzer on 10-21-2008 11:21 AM
    Message Edited by tschweitzer on 10-21-2008 11:22 AM

  • Media Manager slide show timing help

    Hi,
    Not sure which forum this belongs but I have built multiple slideshows on my vista 32 machine using media manager.  I added music in the back.  When shown on my pc the slide show takes the timing settings I gave and runs perfect.  However when I go to the tv, the timing is fixed at 5 sec.  What can I do to adjust the timing?  Also, is there a means to play in a loop?  I have a music file with slide show I want to use on my large video wall during a party and want it to set to loop (100+ slides).  Thanks for any help!

    Open your project. Hover your mouse over the music track in the timeline and when it changes to a hand symbol, click once to highlight the track you want to remove. Then hit delete.
     

  • Media Manager not working with new Verizon Curve, Please Help...

    Close to returning my new Curve. The Roxio Media Manager will not recognize my Curve at all. I have tried everything, read every post and still nothing. Using version 4.3 of Desktop Manager with Vista Home Premium. Someone please help...
                                                            Thanks for any help

    Same issue here.  Contacted Verizon tech support, they had me reinstall media manager -- which did nothing.  They had me try disabling mass media support and the media card support.  Neither which worked.  After 90minutes on the phone, the tech was contacting their "advanced support department" to get more info.  I got fed up and hung up.  Maybe they will call me back -- who knows.
    The tech said that they might have to contact RIM to get it fixed.  I am thinking verizon inadvertantly blocked media transferring -- like they do on all of their other phones.  However, VCAST is not available on Blackberry phones for Verizon, so it is a stupid idea if they did it. 

  • Help needed with Media Manager

    I recently purchased the Blackberry Curve, 8310 and downloaded the most updated version of Media Manager.  While connected to my PC with the USB cable, the desktop manager fires up, updates my email accounts, etc. and seems to be able to communicate with the Blackberry.  However, when I then open up Media Manager to transfer photos, it does not recognize the phone connection.  Any help in defining what I'm missing here would be appreciated.

    If you have a media card in your BlackBerry then the easier way to transfer items to it is to just click on the My Computer icon and drag and drop them to the appropriate folder. Music to the \blackberry\music folder and so on. As for the problem with the Media manager, it should be remedied by installing the OS for your device to your computer.
    Message Edited by tschweitzer on 10-21-2008 11:21 AM
    Message Edited by tschweitzer on 10-21-2008 11:22 AM

  • Help! Do I need to use Media Manager to re-encode my AVI's so that the image is not so terrible?

    I hired someone to take 16mm film and digitize it for me. He gave me AVI files, though I asked for MOV files. When I brought the AVI files into FCP, it said "use media manager to optimize this footage for FCP use." I (foolishly) didn't because I haven't had great success with Media Manager before, and the assets looked fine in FCP despite the warning. In truth, I am kindof intimidated by Media Manager... it's just not something I have ever had the opportunity to learn until now.
    I have now edited the footage, exported from FCP in Quicktime MOV, imported into DVD Studio Pro, and burned a disk. PROBLEM: The image quality is terrible. I know it must have something to do with the warning I ignored. So now I'm looking at Media Manager and wondering how to proceed. I'm sure the warning told me what to do, but now that I can't see it again, I don't really know what I'm supposed to do with Media Manager... re-encode? After seeing poor quality images, re-encoding doesn't feel right... but maybe?
    It's also possible that the problem isn't with the AVI's at all, but somewhere else. The DVD quality is poorer than the video playback in FCP, so somewhere along the line there was decay, and I'm assuming it was when FCP exported. I'm kindof freaking out. Any help would be great.
    Also, my Compressor doesn't work anymore, so I'm screwed for using that.
    Thanks,
    RH

    Much like the ubiquitous "QuickTime Movie" (.mov) file type, the AVI file type is merely a container.  The audio and video streams within that container could be made from a number of different codecs.
    Most AVI codecs don't work in FCP natively, which means you will have to render more often than if you had converted the footage first to a FCP friendly codec.
    If the video looked good in FCP, but bad on a finished DVD, chances are the quality loss was during the encoding process.  I assume you used DVD Studio Pro for encoding, since you say that Compressor doesn't work for you.  I'd look into getting that problem solved and then use Compressor to handle the encoding and just use DVD Studio Pro for authoring and burning.
    Have you tried this?: http://www.digitalrebellion.com/compressorrepair/
    -DH

  • Media Manager Problems in FCP--Need Help Quick!

    I'm trying to package my short film to send to a color corrector. He wants it packed by "Media Manager," but whenever I try it, it keeps saying "Error, the specified file is locked." Help?

    He probably just wants the sequence media managed, creating a new fcp project with just this sequence included.  Media manager usually requires all sources to have reel names assigned to them.  If you brought any material in digitally (graphic files, quicktimes, etc), you will need to add reel names for these files in the browser.  Once that's done, make sure the sequence is selected in the browser and go to file:  Media Manager.  Choose Copy Delete unused media from duplicated items and Duplicate selected items and place into a new project.  Questions?  You could post back or perhaps read the appropriate sections of the manual - or talk to your colorist.

  • Problems with Media Manager on Blackberry Desktop, any help?

    I installed both cds that came with the phone.  When I goto the Blackberry Desktop Manager and select Media Manager, the Roxio for Blackberry Screen comes up but then does nothing, program doesn't run.
    I also tried using the BlackberryMedia Sync, when I select start a screen pops-up saying, "The Blackberry Media Sync installation failed to initialize. Please run the BlackBerry Desktop Manager with adminstrative privledges and try again."
    The first time this happened I uninstalled the Desktop Manager, then reinstalled it.... but that didn't work.
    I'm new to using a Blackberry so I'm not sure how to solve this problem.
    Any help on the subject would be greatly appreciated! Thanks!

    You have to download Media Sync separately. 
    http://na.blackberry.com/eng/services/media/mediasync.jsp
    After you have installed it, start your Desktop Manager and then start Media Sync and off you go!

  • Media Manager Error 13- Can someone help me out?

    When copying a project in FCP 6 from one drive to another using media manager I got an error message 13 ? Anyone know what that means?.

    The log says the ports are not open.
    Specifically port 5060 as there is no detail in the log.
    10:02 PM Friday; November 2, 2007

Maybe you are looking for

  • Looking for help to improve Airport performance over LAN (WAN is fine)

    Ok, I've read through several threads on this forum that address problems people are having with slow performance with Airport. I've also checked out all of the Apple KBs that address Airport, recommended settings. Unfortunately my issue isn't addres

  • Reg transfer of data from excel to internal table

    hi i need to upload datas from Excel sheet to Internal Table.For this i use d FM ALSM_EXCEL_TO_INTERNAL_TABLE.but the problem is if a particular field has no value in excel sheet,then its not  uploaded into internal table.then next field value has co

  • BAPI_QUOTATION_CREATEFROMDATA issue

    Hi SDN friends, In the BAPI_QUOTATION_CREATEFROMDATA i want to use the EXPORTING parameter  WITHOUT_COMMIT  . Purpose: If iam using this BAPI, i want the quote should not be created by using WITHOUT_COMMIT  . What is the value need to be passed to re

  • How to access  j2ee servlet directly?

    Hi All, I have a question about Doc 333862.1 My customer wants to follow test case in the CAUSE section. He wants to call SimpleServlet with bellow URL. http://hostname:port/j2ee/servlet/SimpleServlet When I execute it in our test instance, I can't a

  • There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty.

    Hi While trying to perform the operation 'Annul All Below' in DRM 11.1.2.1, I received the following error: There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty. Has anyone seen this