Media Not Recognised In Canvas/Timeline?

So I went out to shoot an interview and I have captured the footage from my DV tapes and edited it all in to FCP 6.
I returned to it toda, and the timeline is not recognising the footage any longer! Although the Viewer plays the clips in their entirety, when you play through the timeline, sound comes through, but no picture. Even more confusing, the wireframes of the footage/images are displayed, but the actual image is just black. Not only that, when you drag a perfectly good piece of footage into the canvas, the picture again does not show up!
Anybody got any ideas what could be going wrong? This is the third project I have "lost" through these bizarre goings-on.

Hi,
Check that your canvas is set to show "image" and not just wireframe.
DM

Similar Messages

Iphone 5 media not recognised on fiat blue and me

iphone 5 media not recognised on fiat blue and me

if you connects an ios device over usb it only provide 3 features
1. sync with itunes (only on computers of cause)
2. act as a camera to copy out the photos (only on computers)
3. charge the ios device
nothing you connect by usb can play music on your ios device

Blackberry Z10 sharing Media not recognising the devices

Hi,
Media sharing is not working in my BlackBerry Z10, Devices are visible in "Devices for sharing Media" and I have selected the desired devices however, in "select a device to play on" none of device is visible to select.
I am trying to connect my Sony vaio PC which is DLNA certified.
Do I need to make any changes in my blackberry device or laptop. Both devices are using same WIFI network.
Thanks,
UPEN

upen_bb wrote:
Hi,
Media sharing is not working in my BlackBerry Z10, Devices are visible in "Devices for sharing Media" and I have selected the desired devices however, in "select a device to play on" none of device is visible to select.
I am trying to connect my Sony vaio PC which is DLNA certified.
Do I need to make any changes in my blackberry device or laptop. Both devices are using same WIFI network.
Thanks,
UPEN
While playing Video, select More then Play On, you should see HDMI (Not connected) and compatible devices (mine Shows WDTVLIVE), select Media Sharing at the bottom and activate all media. Select Devices at the bottom and check if device is listed, it should be there with stacks of other unkown devices and IP addresses.

My iphone is not recognised on either my computer (windows 7) or in the latest itunes that i downloaded. It was recognised for a short time but windows media player asked to open my pictures and i clicked ok. I also started downloading the newest software

My iphone 3gs is not recognised in either windows 7 or in the latest itunes. It was briefly but then Windows asked me if I wanted to open the camera with Windows media player and I clicked ok. I also tried to download the new software for the phone. Now nothing works. I also downloaded a programme which you supposedly need for iphone with windows 7
Any help please

The ONLY program you need for an iPhone on Windows 7 is iTunes. Remove whatever the other program is, then remove and re-install iTunes as diesel vdub recommends.

Adobe Media Encoder CC 2014 not recognising opacity/alpha values from After Effects

Hello, I'm importing AE compositions directly into Media Encoder to output as 'Match Source - Medium Bitrate H.264' files. However Media Encoder is not recognising the opacity values of the layers in AE and the background images are coming out as opaque rather than partially transparent.
How can I resolve this? If I render the movie from AE as a .mov then use Media Encoder it works fine, but that takes a lot more time.

Can you post screenshots of your comp in After Effects and the result you are getting from AME?
One issue you may be hitting is that AME is not aware of the composition background color. This is a limitation of Dynamic Link; because a primary use case of Dynamic Link is placing an After Effects composition, such as lower-thirds titles, into a Premiere Pro sequence, Dynamic Link ignores the background color of the composition and treats any the background pixels as alpha. In AME, since there is no compositing happening, black is used to fill in the alpha area.
To work around this limitation, place a solid at the bottom of your composition layer stack that is the color of your background.
You're welcome to submit this problem as a feature request: http://adobe.ly/feature_request

Audio recording on a flash. recommended to download vlc media player did this. tried to play messages says quicktime does not recognise this format. what to do pleaser

RECIEVED AN AUDIO RECORDING ON A FLASH. PLUGGED IT IN. DOWNLOADED VLC MEDIA PLAYER AS RECOMMEMDED. TRIED TO PLAY.
MESSAGE RECEIVED SAYING QUICKTIME DOES NOT RECOGNISE THIS FORMAT. WHAT TO DO PLEASE.

You could add Perian. It may help (...or not).
Wait, you received and audio recording and you are trying to use a video player (vlc) to play it? What kind of file is it? Does it have a filename extension? If it is .wmv then you might want to install Flip4Mac. Then you could play it with QuickTime.

HT1386 windows media player does not recognise my ipod nano

windows media player does not recognise my ipod nano

irishjohn1 wrote:
windows media player does not recognise my ipod nano
Use iTunes. It is designed to sync a Nano and other Apple devices.

Windows media player does not recognise to sync ipod 5th gen. ???

windows media player 11, does not recognise ipod 5th generation when trying to sync. will i have to use itunes file?

You might want to try posting your question in the iPod 5th gen connectivity to Windows forum here:
http://discussions.apple.com/forum.jspa?forumID=807
I use iTunes to sync with my iPod. I am not sure how or if you can do that with Windows Media player.

Zen Micro not recognised using zen micro media explo

Hi?get the error "device not connected" when I use the above facility,even though IT IS plugged in with the USB cable?Player is recognised in Windows Media Player. Any ideas ??Thanks??

The problem will be the same I would think because the issue is that the player is an older one, so WMP does not recognise it. Unless they change it in te full version, which is probably only a slim chance, you will still need to download the hotfix and the other update.
But if i were you i wait for the full version anyway, the Beta 2 is better but still far from perfect...

Zen Micro not recognised after installing Media Player 11 Bet

Can anyone help?
I've updated Windows Media Player 0 to version Beta 2 and now my Zen Micro (Firmware 2.2.02 Playforsure) isn't recognised anyway on my system.
I've tried to re-install the CD but this doesn't do anything. I've download all the updates I can find on Creative's website and that does nothing.
I can't even use the Zen Micro MTP exlorer as this has disappeared off my system.
I'm running Windows XP SP2.
HELP!

The problem will be the same I would think because the issue is that the player is an older one, so WMP does not recognise it. Unless they change it in te full version, which is probably only a slim chance, you will still need to download the hotfix and the other update.
But if i were you i wait for the full version anyway, the Beta 2 is better but still far from perfect...

Desktop software for MAc v2.4 not recognising internal media of BB 9900 running 7.1 Bundle 1149

Hi,
THis was working earlier. But since past month, when i connect the BB 9900 to my Mac running ML, the stoage is not recognised. The Desktoip software version is 2.4.0 (Build 16).
"Storage:Not installed" appears on the status when connected.
I am unable to sync my photos etc.
Please help me resolve this issue.
thanks,
Alex

Follow these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper (v 2.8). Earlier versions than the one released in 2012 require more extensive work to uninstall all its components.
The effects of having actually used MacKeeper to do anything are a completely different matter. The fastest way to take an exquisitely designed and painstakingly engineered Mac and make it run like a steaming pile of dung is to install and use such ill-conceived "cleaning" or "security" products. This is just one example of a broad category of time- and money-wasters capable of causing damage that can only be rectified by reinstalling OS X, restoring from a backup, or completely erasing your system and rebuilding it from the ground up. Never install such junk on a Mac.
If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
Quit the MacKeeper app if it is running.
Open your Applications folder: Using the Finder's Go menu, select Applications.
Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
You will be asked to authenticate (twice):
You do not need to provide a reason for uninstalling it:
Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.

Elements does not recognise prel file

I saved a project to DVD (photos with background music) Elements does not recognise "prel" file when trying to reload project. How do i open file in Premiere Elements 10

Chris (Herbie53)
There was no Premiere Elements 5 and 6. The version numbers went 1, 2, 3, 4, 7, 8, 9, 10, 11, 12 (latest) So you probably use Premiere Elements 4 or maybe 7 on probably Windows 32 bit XP or Vista.
Case 1. (Here we assume that you have the project.prel file (project) saved to a DVD disc as data disc.)
Even if you had saved that older Premiere Elements project file (project.prel) along with copies of the media that went into it, it is still questionable whether that old project.prel could be opened in Premiere Elements 12. But, assuming that the media was still connected to it (which it probably is not), you could try by right clicking the project.prel file and selecting Open With Premiere Elements 12. Have you gone that route, and the project would not open or you were greeted by "Where is the file...?" messages.
Case 2. (Here we assume that, when you were using the the older program, you took the project Timeline to DVD-VIDEO on DVD disc...this is not the project.prel file, but an export of it.)
In this situation, if you put your DVD disc in the burner tray and explored it, you would see two folders, one named OpenDVD and another named VIDEO_TS. This is your best case scenario. If this is the case.....
a. Put your DVD disc in the burner tray.
b. Open Premiere Elements 12 Expert workspace. Go to File Menu/New/Project and Change Settings.
In Change Settings, set the project preset for either NTSC DV Standard or NTSC DV Widescreen. For now, we will assume NTSC DV Standard. Then, before you exit that area, in the last dialog that you see (new project dialog), make sure you have a check mark next to "Force Selected Project Setting on This Project".
c. Next, back in the Premiere Elements 12 Expert workspace, use Add Media/DVD Camera or Computer Drive/Video Importer where you will select video files from the VIDEO_TS Folder to bring into the Premiere Elements 12 project. You will have to redo the menu in 12. The video files that you want from the VIDEO_TS Folder typically start with VTS_01_1.VOB and continue in series which can be detailed later.
Goal right now is to sort through the details so that we are in sync on what you have in order to enable us to be confident about the troubleshooting strategy.
We will be watching for your comments and results.
Thanks.
ATR
Add On.....The classical recommendation has always been to complete a project in the program in which it was created. But let us see what can be done here.

Upgraded now iphone not recognised by itunes

Iphone now not recognised by itunes upgrade failure, phone backup done? phone wiped clean, now not recognised by itunes. Iphone4 only shows symbol - connect to itunes. if rung goes straight to answer phone... can’t reinstall phone setting
Please Help!!!!
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Shuttle Inc SK22V10
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 0012AA2407E53CC0
Current user is an administrator.
The current local date and time is 2011-10-25 10:59:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 7900 GT/GTO
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {03B67EC8-2820-41F2-AEF0-217534063E15}
Description:          VIA Compatable Fast Ethernet Adapter - Packet Scheduler Miniport
IP Address:          192.168.1.8
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.1.1
DHCP Enabled:          Yes
DHCP Server:          192.168.1.1
Lease Obtained:          Tue Oct 25 10:33:36 2011
Lease Expires:          Wed Oct 26 10:33:36 2011
DNS Servers:          192.168.1.1
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-10-25 10:42:07.
**** CD/DVD Drive Tests ****
LowerFilters: Pfc (2.5.0.204), PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
E: PIONEER DVD-RW DVR-111D, Rev 1.23
Audio CD in drive.
Found 8 songs on CD, playing time 74:00 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:07:56
Track 3, start time 18:33:06
Track 4, start time 23:01:36
Track 5, start time 37:41:28
Track 6, start time 45:20:46
Track 7, start time 50:53:11
Track 8, start time 61:04:51
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   4 10 16 20 24 32 40 48.
The drive CDRW speeds are:   4.
The drive DVDR speeds are:   4.
The drive DVDRW speeds are:   4.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
VIA Rev 5 or later USB Universal Host Controller. Device is working properly.
VIA USB Enhanced Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPod classic running firmware version 1.1.2
Serial Number:          8K741QXJYMV
iPhone 4 (GSM) running firmware version 4.2.1
Serial Number:          83052PL1A4S
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Read here to troubleshoot your issue - http://support.apple.com/kb/TS1591

All firewire devices not recognised after upgrading to Leopard 10.5.4

Hello, yesterday I finally got around to upgrading one of my home computers (old Emac G4 powerpc from 2005) to Leopard. I have been using Leopard on my work computer (G5 also from 2005) with no problems for a year now (this Leopard update was installed professionally when. I work with a lot of files on external hd's, mostly Lacies, one Maxtor and yesterday got new G-Drive 1TB. Since the upgrade the Emac will not recognise any of the external hds when connected by Firewire. It will recognise them if I use the USB. However I'm sending too much media traffic (film editing) to just use usb all the time. I need my firewire connections!
This is clearly a Leopard issue, there are no problems with the drives or the firewire connections or the cables, they all work fine on the work computer and my other home computer (powerbook laptop G4) and as I said the upgraded emac will recognise them from usb. And since it's three different kinds of drives that all work on other computers but all stopped working on the single Leopard upgrade it's not a Lacie, Maxtor or G-drive problem.
I've seen a lot of threads on this and other support forums about firewire problems but some are a slightly different problem and many are quite old so I wonder if anyone has any recent experience/advice for me?
Many threads complain that Apple was not recognising the problem, maybe there is also some progress there?
thanks in advance for any help!

It's still possible that there is now a hardware issue, and if so it might respond to resetting the FireWire bus. This can often be done by just unplugging the power cord for a few minutes.
From
*What to do if your computer won't recognize a FireWire or USB device*
http://support.apple.com/kb/HT1317?viewlocale=en_US
# Shut down the computer.
# Disconnect all devices and all other cables, except the keyboard and mouse cable(s).
# Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
# Plug the computer back in and turn it on.
# Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.
--------------------------

Itunes not recognising my ipod and windows asks me to format

Itunes is not recognising my Ipod when I connect to my PC. I've been using it for 8 years so this is out of the blue. I get this flashing up:
"Microsoft Windows
You need to format the disc in Drive N before you can use it. Do you want to format it?"
Bottom right of my screen
Safely remove hardware and eject media gives me the option to "Eject Apple iPod USB device"
I did that and now find my iPod has wiped all my stored items and I've had to reset date etc. Is this a Windows or an Apple problem?

Retracts 28
Reallocations 0
Pending 2
Power on 754
Start/stop 273
Temp 25c
Min 4c
Max45c
I'm afraid I got so frustrated with the PC crashing that I threw in the towel and ordered an iPod touch this morning after tentatively syncing my mini iPad this first, with no problems, just in case it was the PC. Iv'e changed it to wifi syncing now as a further precaution.
If I can get the Classic to work again I can at least try to sell it as a functioning model.

Media Not Recognised In Canvas/Timeline?

Similar Messages

Maybe you are looking for