Media Not Saved Error - Slide Duplication corruption suspected
I've recently upgraded to KN '06 and have run into a nasty. When saving changes to a 60 slide presentation I've started getting "failed to save" messages about picture and movie media associated with the slides. It finally occurred to me what was causing this.
If I duplicate a slide, KN'06 is either losing its connection to the media file on that slide or not actually creating a copy of the media that the duplicate slide expects to find in the package. (Would have researched but was up until 2am waiting for spotlight to come out of la-la land. I could be wrong but I don't think I have 31,845 files with the word "caterpillar" in the filename. I must be wrong because it finally listed them, my entire volume. Hey, it's good concept, just a few bugs is all.)
Need more testing to see if the same results come from "duplicate" and "copy/paste" - I used both techniques and perhaps one works where the other doesn't.
Unhappy mac-nab
I have the same problem; every time I open a keynote presentation I have to re-insert .mov files, and every time I close the presentation they are gone (that is, the thumb is there but the movie is not, and despite checking "copy audio and movies into the document".
HELP.
Similar Messages
-
"media not present" error when burning blu ray in PE12
I have two systems, both ground-up builds, identical Win 7 Home Premium and Premiere Elements 12 installs. Both systems have internal blu-ray burners. One burner is an ASUS BW-12B1AT and the other is a Pioneer burner (don't recall the model number).
System 1: Intel 4770k with Gigabyte MB
System 2: AMD 8-core with Gigabyte MB
System 1 gives "Media not present" error in PE12 when attempting to burn to blu ray discs using Verbatim discs. System is able to burn DVDs and CDs, and playback blu ray discs. System is also capable of burning blu rays using Nero.
System 2 works fine - blu ray media is recognized instantly by PE12 when in the drive and burns blu rays perfectly.
I swapped the blu ray drives and SATA cables from System 1 and System 2 with the same result - this eliminated the drive manufacturer and cables from being the problem, as both drives worked perfectly in System 2 and neither worked in System 1. I also tried different SATA ports and power supply taps on System 1 without any success.
Then, I noticed that on System 1, with the dialog box open and indicating the "media not present" error, if I ejected the blu ray disc and reinserted it, the burner LED would flash 18 times (approx. 1/sec) and then pulse briefly indicating a burst of activity for about 1 second, as if it was either reading the disc or writing to the SATA. If I pressed the "rescan" button during this brief burst of LED activity, then the disc was recognized and I could proceed to burn it. If I tried to press the rescan button at any time before this instant or after, the "media not present" error did not clear.
To me, this is an indication that something in the handshake timing of the SW and the burner is not correct, and that timing differences in the system HW are not provided for in the SW. I see that many others have had this issue and have had to buy work-around image burners to address this. I believe your burner drivers need to be reworked to eliminate this bug. This is evidenced by the fact that Nero works and your SW does not, and that different systems consistently exhibit this problem.
Please let me know when you will have a SW patch to address this or if you have any idea of system settings that can be adjusted (I don't know of any myself) that would eliminate this problem.pastrobes
This is not Adobe. Rather user to user. If you want to contact Adobe, your likely route is via Adobe Chat.
If you have a feature request or bug report, then consider filing a Adobe Feature Request Bug Report Forum with Adobe
Adobe - Feature Request/Bug Report Form
The likelihood of an Adobe engineer seeing your thread here is essentially slim to none.
Your results are very interesting but lots more variables to consider.
Do you have any version of Premiere Elements other than 12? It would be interesting to learn if a prior version's burn
dialog would present with the Media Not Preset issue for your burn to Blu-ray System 1. That is easy enough done with a tryout of
11 or 10 or 9 from the following web site. ProDesignTools: Adobe® Developments in Focus
On the other side of the coin, you could give the new version a look in this regard. A new version is expected at the
end of September 2014.
As an aside, have you updated 12 to 12.1 Update, using an opened project's Help Menu/Update. If not, I would encourage
you to do so. It does correct an Expert workspace text styles issue plus other matters undefined by Adobe.
ATR -
What causes Media not present error, even with disc inserted
I have a 2 hr video project that I would like to place on a DVD in NTSC format. I get an error msg "Media not present" even with DVD inserted in burner. I have checked "Fit content to available space". Is the 2 hr project too long to compress onto the DVD, or are there other possible causes? I did a 1 1/2 hr project with no problems. I have plenty of hard drive space.
download orders
What version of Premiere Elements and on what computer operating system is it running?
The problem is the disc in the burner tray not being recognized by Premiere Elements. Another frequent related issue is Burner Location: in burn dialog being empty when the Premiere Elements does not recognize the burner.
In the problem that you have,
a. Have you tried other brands/types of DVD discs?
b. If you start a new project and take the new Timeline content to DVD-VIDEO on DVD disc, does the problem remain the same?
B. Have you tried program uninstall/free ccleaner run through/reinstall with antivirus and firewall(s) disabled?
If you are in a time crunch, you should consider burning the Timeline content to folder and then taking the VIDEO_TS Folder from that
saved folder into a program like ImgBurn for the DVD-VIDEO on DVD production.
Please review and consider and then we will supply you with how to details. Looking forward to your results.
Thank you.
ATR -
BPC 4.2 Dimension not saved
Hello dear friends,
I 'm encoutering a prroblem when trying to process a dimension in bpc version 4.2
when i click on the process button i have this message
CANNOT SAVE THIS WORKBOOK
ERROR: DIMENSION.XLS EXCEL FILE WAS NOT SAVED
ERROR: DOCUMENT NOT SAVED
i tried to go to manage dimensions screen and save my dimension again
i saved the application using this dimension again
i saved on my desktop the xls file and tried to save it manually on the server but can't save it
please can you help me regarding this issue, how can i solve it without creating a new dimension etc...
thanks in advance
best regards
C.LThe member sheet itself might be corrupted. Rename the suspect sheet to dimension_old.xls and then copy and paste its contents into a new workbook. Don't forget to rename the worksheet tabs.
Also, this is old OutlookSoft KB article:
Please check the following:
Make sure the AdminApp directory is not set to read-only. If it is and cannot be changed you can recreate the directory and move everything over to the new folder.
Delete the files under the AdminApp/LogFiles folder.
Try validating and processing again.
This can also be caused by load balancing software running. We have an issue with load balancing that is under investigation right now. If you have two or more webservers with load balancing you will get these messages periodically. At this time, we recommend using only 1 web server.
Another Osoft KB:
Please try the following on the Everest Server to resolve this issue.</p>
Turn off "enable authoring" on the default web site in IIS on the Everest Server, this forces Everest to use WEBDAV instead of FrontPage Server Extensions which we have found to be more stable. NOTE: IF YOU ARE USING WINDOWS 2003 SERVER YOU WILL FIND THIS UNDER "WEB SERVICE EXTENSTIONS."
Delete all vticnf folders on the Everest Server and in IIS. These folders are a result of using Frontpage Server Extensions rather than WEBDAV.
Enable Content Expiration in IIS:
Under the Default Web Site folder, navigate to the Application Set folder.
Expand the AppSet then right click on the Adminapp folder and select Properties.
On the HTTP Headers tab select the Enable Content Expiration check box and select the Expire Immediately radio button.
Click Apply then click OK.
Repeat for all Application Sets under the Default Web Site.
Run the server diagnostic utility on the Everest Server and check results. It is possible that some of the directories in IIS are not set for "WRITE" access. -
Hi All
We are currently in the process of upgrading all PC's on our WAN to windows 7 across multiple locations
I know this has been asked numerous times but nothing is working for me.
We are experiencing the dreaded 'Document not saved' error at only some locations (5 or 6 out of 200 for all users, these sites generally have slow network connections) when trying to save to a network share back at our HQ. it creates a .tmp file and leaves
the original document intact but without the changes, changing the name of the document in save as doesn't work. saving locally and copying to the share works. We can save locally and to other onsite network shares. It constantly happens so the document can
never be saved to that network share.
Always worked on XP SP3 with Office 2010.
the files in question are around 4mb. smaller excel files with no contenct do work.
I have tried literally everything listed on all forums and nothing seems to resolve it...I've tried
- the hotfix - doesn't apply to my enviroment and the offending KB aren't installed.
- the network resiliency, pivot table network resiliency and Enable simply copy for UNC registry keys
- disabling offline folders, windows search and indexing
- disabling SMB2 on the client
- turning off QOS on the IP4 settings.
- trusted documents.
event log gives
Log Name: OAlerts
Source: Microsoft Office 14 Alerts
Date: 28/03/2014 18:47:23
Event ID: 300
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Description:
Microsoft Excel
Document not saved.
P1: 100490
P2: 14.0.7015.1000
P3: xsmh
P4: 0x80070040
and numerous other things.
My guess is me the issue points to Excel loosing connection to the network share when saving and then the .tmp becoming corrupt.
Does any one have any ideas? Is there a way to sure the connection when saving? is there a way to force it to stay connected?
any help highly appreciated.
ThanksHello, We've been having this same issue, and I think we have a work-around.
If we change HKLM\System\CurrentControlSet\services\LanmanWorkstation\Parameters\RequireSecuritySignature from "0" to "1" we still get the error message but the tmp file is NOT created. If the user tries to save again, it is then successful. -
Error 1335: file corrupted Media.cab (CS3 Web Premium)
ING
Hello,
I have Adobe Creative Suite 3 Web Premium and am having trouble reinstalling the applications.
I had to remove them from my switch and when I reinstall the error 1335 appears corrupted file, in case Media.cab, I saw my media and is a risk with it, but do not know whether this risk is due. I wonder if someone had the same problem, it failed to respond or if you can put the Media.cab of CS3 Web Premium for me to download.
Have I contacted the media in Brazil, but the clerk informed me that they do not give more support for this product and that I should contact the forum to try to solve.
(Note: Sorry my English, translated on the Web)
PT_BR
Olá,
Tenho o Adobe Creative Suite 3 Web Premium e estou tendo problemas em reinstalar os aplicativos.
Tive que remover eles do meu comutador e quando fui reinstalar aparece o Erro 1335 de arquivo corrompido, no caso Media.cab, estive vendo minha mídia e está com um risco nela, porém não sei se é decorrente deste risco. Gostaria de saber se alguém teve o mesmo problema, se conseguiu responder ou se consegue colocar o Media.cab do CS3 Web Premium para eu baixar.
Já entrei em contato com o suporte no Brasil, porém a atendente me informou que não dão mais suporte a este produto e que eu deveria entrar em contato pelo fórum para tentar resolver.I am installing a brand new MacPro with OS X 10.5.2. It is a machine upgrade for the user so all of her previous user files were also transferred during the setup. Two days ago we got our new CS3 site license upgrade discs and I was using it to install a fresh copy of CS3 Standard. We had a 5 user license disc that we were using to test before deploying CS3 to the users so we know that we can install from that disc, unfortunately it is a CS3 Premium disc and a different serial number.
Also of note, once the setup.app crashes (actually it never really launches) other apps, like Safari also will no longer launch. I have repaired disk permissions and the next thing I will try is installing as another user, but it looks like you guys have already tried that.
Any help would be wonderful, this user returns from vacation on Monday!
Thanks,
Laura -
Adobe media encoder export error "writer not found"
When trying to export to wmv using adobe media encoder I get an export error of "writer not found". I did a search and found others having the same issue with no fix as far as I can see. Just wondering if anyone has any more iformation on this. I'm using Vista Ultimate and Premiere CS3.
ThanksI registered the WMEncoderHelper.exe file with regserv, but I still get
the "writer not found error". I wish I knew what codec it is trying to find and use. -
I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)? I edit the presentation depending on the audience to which I am presenting.
If you add a new slide with just a text box (therefore a very small amount of data), to an existing presentation then save, Keynote will only save the new content to the file, it wont save pre-existing content as its already included in the file.
The time taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again. -
Error while configuring GCM: The push settings were not saved. Error 400
Hi,
While configuring push settings for google cloud messaging in azure mobile services, i entered the server key received from google developer console.
When i try to save the entry, i get the message The push settings were not saved <mobile-serversices-site>: Error 400
I have regenerated the key multiple times but of no use.
Am I missing something? I am a paid subscriber of Azure
Thanks, Laks.Sorry for the late reply. Sometimes there are transient errors in the portal that affect whether or not the settings can be saved. Also, you should make sure that you have an associated notification hub (which will show up in your push settings). If there
is no associated hub, you will always get errors when trying to configure. -
Datatype : 25 not supported error while saving Logical Query in BIP Dataset
Hi All,
I have created a nested logical Query in OBIEE Publisher Datamodel using parameters.
Here is the simple query :
Select name, revenue, date from
select "SubjectAreaName"."TableName"."Name" name,
case when :Date > date '2012-01-01' then "SubjectAreaName"."TableName"."Revenue" else NULL end Revenue,
date date
from
"SubjectAreaName"
where
date = :Date
) T1
Note - :Date is the parameter. When I try saving this dataset as-is, it throws me Datatype : 25 not supported error. But, when i replace the parameter :Date with actual date, then the query works. Also, the inner query works with or without parameters. The issue arises when I use the outer query and the parameters.
Please let me know if you have come across such a problem ?
Any help on this regard would be highly appreciated.
Thanks
Swarnaya i can understand we wont do the sql logic at the data model part as some time performance issue may come when comparaed to sql run in package and sql running in data model . so i have mostly done using package and i will just do select * from table in the data set of data model so i didn't face any issue's like this .
once check this tutorial may be you already
i use to create parameters like this i didn't face any issue
SELECT * from TEST where ID=:p_id
http://st-curriculum.oracle.com/obe/fmw/bi/bip/bip11g/gettingstarted/gettingstarted.htm -
Hi,
Re: "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed"
I have a client who is getting the above error when attempting to change delegate permissions in Outlook 2010.
She is also getting this error when she tries to remove a delegate.
I have tried recreating her mail profile.
I have also tried kb2593557. The auto fix didn't work at all and the registry fix only removes the error message and not the problem. This client would like to be able to edit her delegate permissions.
She is on Exchange 2010
Any assistance would be appreciated.The article you provided is not related to the error message that the user is getting it.
Can you please provide better solution? I know this answer and this post is old but I am having same issue.
The error message is only (The Delegates settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed) I was not able to attach screen shot. -
Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?
I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan -
Error"Update was terminated' while doing picking and data was not saved
hi experts,
I have created a sales order. for that i created a deliery.then i created shipment .and i have put pick qty and batch.
it gives a message Express document " Updated was terminated "received from author XXXX.
and picking is not saved and i'm not able to do PGI.
Please help me.....
Thanks in advance,
riaHai,
Analyse this error in ST22 - ABAP runtime error or in SM13 - update request.The system will show the error update records in red color. Click the error & see the problem in funciton module.THis may be because of no ranges problem or any changes in print out program. Also if u have any BADI activation for the sale order & any changes in this program also leads to this error. -
BMP question : got javax.ejb.EJBException error Object state not saved
Could anybody please help me? I could not figure out what i did wrong.
I got the javax.ejb.EJBException error: Object state not saved
when i test the getname() method for findByPrimaryKey() and findAll() methods.
Here is my code:
package org.school.idxc;
import javax.sql.*;
import javax.naming.*;
import javax.ejb.*;
import javax.sql.*;
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
import java.util.ArrayList;
import java.util.Collection;
import java.util.Enumeration;
import java.util.Vector;
* Bean implementation class for Enterprise Bean: status
public class statusBean implements javax.ejb.EntityBean {
private javax.ejb.EntityContext myEntityCtx;
private int id;
private String name;
private DataSource ds;
private String dbname = "jdbc/idxc";
private Connection con;
* ejbActivate
public void ejbActivate() {
* ejbLoad
public void ejbLoad() {
System.out.println("Entering EJBLoad");
try
Integer primaryKey = (Integer) myEntityCtx.getPrimaryKey();
String sqlstmt = "select id, name from from status where id =?";
con = ds.getConnection();
PreparedStatement stmt = con.prepareStatement(sqlstmt);
stmt.setInt (1,primaryKey.intValue());
ResultSet rs = stmt.executeQuery();
if (rs.next())
this.id = rs.getInt(1);
this.name = rs.getString (2).trim();
stmt.close();
} // if
else
stmt.close();
throw new NoSuchEntityException ("Invalid id " + id);
}// else
} // try
catch (SQLException e)
System.out.println("EJBLOad : " + e.getMessage());
} // catch
finally
try
if (con != null)
con.close();
}// try
catch (SQLException e)
System.out.println("EJBLOad finally" + e.getMessage());
} // catch
}// finally
* ejbPassivate
public void ejbPassivate() {
* ejbRemove
public void ejbRemove() throws javax.ejb.RemoveException {
System.out.println ("Entering ejb Removed");
try
String sqlstmt = "delete from status where id=" + id;
con = ds.getConnection();
Statement stmt = con.createStatement();
stmt.executeUpdate(sqlstmt);
stmt.close();
}// try
catch (SQLException e)
System.out.println("Ejb Remove" + e.getMessage());
} // catch
finally
try
if (con!=null)
con.close();
}// try
catch (SQLException e)
System.out.println ("EJBRemoved " + e.getMessage());
} // catch
} // finally
* ejbStore
public void ejbStore() {
System.out.println("Entering the ejbStore");
try
String sqlstmt = "update status set id=" + id + ",name='" + name + "' where id=" + id;
con = ds.getConnection();
Statement stmt = con.createStatement();
if (stmt.executeUpdate(sqlstmt) != 1)
throw new EJBException ("Object state not saved");
stmt.close();
} // try
catch (SQLException e)
System.out.println ("EJBStore : " + e.getMessage());
}// catch
finally
try
if (con != null)
con.close();
} // try
catch(SQLException e)
System.out.println ("EJBStore finally " + e.getMessage());
} // catch
} // finally
* getEntityContext
public javax.ejb.EntityContext getEntityContext() {
return myEntityCtx;
* setEntityContext
public void setEntityContext(javax.ejb.EntityContext ctx) {
myEntityCtx = ctx;
try
InitialContext initial = new InitialContext();
ds = (DataSource)initial.lookup(dbname);
} // try
catch (NamingException e)
throw new EJBException ("set Entity context : Invalid database");
}// catch
* unsetEntityContext
public void unsetEntityContext() {
myEntityCtx = null;
* ejbCreate
public Integer ejbCreate(Integer key, String name) throws javax.ejb.CreateException {
this.id = key.intValue();
this.name = name;
System.out.println ("Entering ejbCreated!!!");
try
String sqlstmt = "insert into status(id,name) values (" + id + ",'" + (name == null ? "" : name) + "')";
con = ds.getConnection();
Statement stmt = con.createStatement();
stmt.executeUpdate(sqlstmt);
stmt.close();
}// try
catch (SQLException e)
System.out.println("EJBCreate : SQLEXception ");
}// catch
finally
try
if (con!=null)
con.close();
}// try
catch (SQLException e)
System.out.println ("EJB Created Finally : SQLException");
e.getMessage();
} // catch
}// finally
this.id = key.intValue();
this.name = name;
return key ;
* ejbPostCreate
public void ejbPostCreate(Integer id, String name) throws javax.ejb.CreateException {
* ejbFindByPrimaryKey
public Integer ejbFindByPrimaryKey(
Integer key) throws javax.ejb.FinderException {
try
String sqlstmt = "select id from status where id=" + key.intValue();
con = ds.getConnection();
Statement stmt = con.createStatement();
ResultSet rs = stmt.executeQuery(sqlstmt);
if (!rs.next())
throw new ObjectNotFoundException();
} // if
rs.close();
stmt.close();
} // try
catch (SQLException e)
System.out.println ("EJBFindBYPrimaryKey " + e.getMessage());
} // catch
finally
try
if (con!=null)
con.close();
}// try
catch (SQLException e)
System.out.println ("EJB Find by primary key" + e.getMessage());
}// catch
}// finally
return key;
* @return Returns the name.
public String getName() {
return this.name;
* @return Returns id
public int getId() {
return this.id;
* @param name The name to set.
public void setName(String xname) {
this.name = xname;
* ejbFindByLastnameContaining
public Enumeration ejbFindAllNamne () throws javax.ejb.FinderException
try
String sqlstmt = "select id from status order by id";
con = ds.getConnection();
Statement s = con.createStatement();
ResultSet rs = s.executeQuery(sqlstmt);
Vector keys = new Vector();
while (rs.next())
keys.add(new Integer(rs.getInt(1)));
}// while
rs.close();
s.close();
con.close();
return keys.elements();
} // try
catch (SQLException e)
throw new FinderException (e.toString());
} // catch
}Hi,
if you look at your error message you will see the problem. In your code you've missed to implement
public void ejbPassivate {}
so your code looks like this
import java.lang.Object;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import java.rmi.RemoteException;
import java.lang.Math;
import java.util.Random;
import java.io.*;
/** * Title: * Description: * Copyright: Copyright (c) 2001 * Company: * @author * @version 1.0 */
public class DiceEJB implements SessionBean, Serializable
public int[] Roll()
Random rng = new Random();
int[] diceArray = new int[5];
for(int i =0; i < diceArray.length;i++)
diceArray[i] = (Math.abs (rng.nextInt()) % 6) +1;
return diceArray;
public DiceEJB(){}
public void ejbCreate() {}
public void ejbRemove() {}
public void ejbActivate() {}
public void ejbPassivate() {}
public void setSessionContext (SessionContext sc)
private void writeObject(ObjectOutputStream oos) throws IOException
oos.defaultWriteObject();
private void readObject(ObjectInputStream ois) throws ClassNotFoundException, IOException
ois.defaultReadObject();
bye -
"upadte was terminated " is the error while doing picking and its not saved
hi experts,
I have created a sales order. for that i created a deliery.then i created shipment .and i have put pick qty and batch.
it gives a message Express document " Updated was terminated "received from author XXXX.
and picking is not saved and i'm not able to do PGI.
Please help me.....
Thanks in advance,
riaHi Ria,
Go to SM13 then select your error and double click it, it will show the error description. with the help of this you can trace the source of the error.
Mostly the update error occurs due to the parameter not being passed.
Regards,
Karthik.
Maybe you are looking for
-
I just got my new iPhone 6 and restored my 4s to it. All the apps loaded up, but only Kenny Loggins songs will play. When I push the play button from the quick menu that pops up from the bottom of the screen, there is no response for about 17 seconds
-
Run info package - urgent please
Hi, I have to run infopackage for date selection oct 2007 in production now. Everyday it runs in the night. For now, I created 1 infopackage and scheduled start immediately. I checked the monitor. It's showing 0 records. but the request is still
-
PDFmaker update Lotus notes 8.5.2
Information for anyone using PDFMAKER and lotus notes we use corp version of lotus 6.5 and then 8.0 recently converted to 8.5.2. I have always used pdfmaker to conver email to pdf for years and when we upgraded it broke. Two key things to get it to w
-
How do I add a Recent Objects direct link group to the navigation bar?
Hi I've noticed in some of the tutorials in the eLearning section there is a Recent Objects direct link group. I presume this is a dynamic collection of recent activities the user has created similar to the My Recent Documents folder you see in the S
-
Contact Apple Support Welcome back. Do you need help with the same topic?
Hello I've got a problem in the security questions I do not know whether there are alternative email how to restore security questions and alternate email. Thank you <E-mail Edited by Host>