Media Pending and Pending and Pending

Hi,
I have a Premiere Project with a Sequence with several Clips that are connect via dynamic link with After Effects Projects.
After realoading I got a lot of Media Pendings. But nothing happends. Is there a bug? I have 16 GB RAM.
Is there a way to manually load them? Or at least is there a kind of progress bar? What happens heres? Why is the media pending?
It sucks. What shall I do? It doesnt load the media anymore.
Regards Thomas

On the slight chance you're using that awful, notoriously bug-laden plug-in Magic Bullet Looks, it's causing this same problem, and you are guaranteed that by disabling it, your problem is solved. It was a nightmare for me, because my whole project was color-corrected based upon that plug-in, so I had to downgrade to an earlier version from last year since Red Giant are totally stagnant in fixing its bugs.

Similar Messages

Conforming and Indexing Errors, Media Pending, Audio won't play in timeline

I'm working on a desktop PC which is running Windows 7 Professional 64-bit and Adobe Premiere Pro (version CS5.5). It's currently utilizing a second gen. 3.4Ghz i7 2600 processor, 16GB of 1600Mhz RAM, 64GB solid-state drive and a ASUS P8Z68-V Intel Z68 Motherboard with onboard audio (Realtek ALC892 chipset) and onboard video. My problem is this:
The conforming and indexing of all of my imported media never seems to finish regardless of how many times I reopen the project file and wait for it. On the lower right-hand portion of the screen, next to the conforming/indexing progress bar, is a little red "X". When clicked, it pops up with a list of errors that read: "An unexpected error occurred while performing a conform action on the following file...". As a result, my audio channels have no waveform and during playback there are no audible tones or levels. On some video clips there's just text that reads "Media Pending". This only appears to happen with project files that I saved on external hard drives, and I suspect it has something to do with the Media Cache Files folder and how Premiere Pro locates these conform/index files. I've also encountered this problem in CS3 and CS4.
I have a few questions:
1) How do I avoid error messages in regards to indexing and conforming
2) How do you know when indexing/conforming has completed itself? (there doesn't seem to be a progress log or a list of commands/executions)
3) Indexing and conforming appears to be an automatic process, but is there a way to do it manually?
4) What's the best way to setup your media cache files when you click EDIT > PREFERENCES > MEDIA?
5) If I have approximately 1 hour of footage, what's an average wait time for conforming/indexing? What about 5 hours of footage? 10?
6) Adobe recommends not editing until the conforming and indexing has completed itself-- how important is this?
7) Sometimes it appears as though the conforming and indexing has finished, but then I still have problems with playback. Do I have to reopen the project for it to continue with the conforming/indexing progress? I've already determined that the video file I'm working with is intact and free of any corruption.
I'm fine with having to wait for a project to conform and index, but it never seems to complete itself! Any help regarding this matter would be greatly appreciated.

Harm filled in pretty much all the salient details, but I'll do another pass here.
1) How do I avoid error messages in regards to indexing and conforming
Two parts here. One, conforming only happens for certain media files, ie the ones where performance is critical and we can't depend on extracting the audio fast enough for realtime playback. That's basically anything in an .mpeg wrapper, or AVCHD material. So if you edit XDCAM HD/EX or P2, or RED, or even AVIs or QT, those formats don't require audio conforming.
If you're stuck editing AVCHD or MPEG2, then it needs to conform. But, that being said, you shouldn't be getting errors in the first place. I think it's related to your external drives. More below...
2) How do you know when indexing/conforming has completed itself? (there doesn't seem to be a progress log or a list of commands/executions)
Nope, you have a progress status bar indicating which file it's working on. If there's an error, it shows up in the events panel.
3) Indexing and conforming appears to be an automatic process, but is there a way to do it manually?
No.
4) What's the best way to setup your media cache files when you click EDIT > PREFERENCES > MEDIA?
While some people like having the check box for having the conform files beside the media, I hate it. Yes, it means that if you move the project to a different system & reopen, it means that you potentially can avoid recreating CFA files, but I find the drive littering not worth it. I much prefer having setting the Media prefs to point to a specific media drive. Usually a raid, if available. Definitely not an external drive that you disconnect & walk away with. If you don't have a permanent raid on your system, then preferably a dedicated internal drive for media (think along the lines as your Photoshop 'scratch disk'). Failing that, leave it on your C: drive, although with a 64 Gig SSD, you probably don't have much room for transient temporaries.
5) If I have approximately 1 hour of footage, what's an average wait time for conforming/indexing? What about 5 hours of footage? 10?
Like Harm said. Totally dependant on the media container & the speed of your drive i/o. The conforming is iterating through the entire file & pulling audio data, so it's not CPU intensive, it's all i/o.
6) Adobe recommends not editing until the conforming and indexing has completed itself-- how important is this?
If you're trying to play/scrub while conforming, it's going to be pokey. Esp. if you're trying to access the file that's actively being conformd. As I just said, we're hitting the files for all the audio. The i/o is being saturated already, so unless you have a stellar raid, you don't have much headroom.
7) Sometimes it appears as though the conforming and indexing has finished, but then I still have problems with playback. Do I have to reopen the project for it to continue with the conforming/indexing progress? I've already determined that the video file I'm working with is intact and free of any corruption.
You should be good to go. Sounds like there's something else at play here.
Okay, back to what I think is wrong: you don't mention what kind of external drives you're using. You're making a bad assumption that blowing away conformed files & doing a reconform is buggy - I doubt it, as that's the same process that happened when you initially brought in the files. I've blown away my media cache folder multiple times and have never seen failures on reconform. So it's got to be one of two things: either a read error from the source when attempting to pull the audio, or a write error to the destination. Now I don't know where you currently are pointing the media cache directory, or what your source drive is, so I can only speculate.
My suggestion is to do some elimination. Copy one of the files that failed on you to your C drive, & target your media cache directory also to C:. Pick a new project, import your copied file, confirm that it conforms correctly & behaves. Then, try to use the same clip from your external drive, keeping the media cache to C:. If that's still good, then try targeting another (local/internal) drive as your media cache target; close/restart, then import the clip from C:, and then import the clip from your external drive. This troubleshooting should give us something.
PS, if you're trying to edit from external USB drives, good luck. I find it a major PITA that I avoid as much as possible. Firewire isn't much better. I know some people do it successfully, but I think it's a road fraught with peril. These devices are generally not designed for heavy duty I/O and a flaky connection or drive is nothing but pain.
Cheers

AVI's (10bit) made with Digital Rapids say 'Media Pending' and never play on PC

I am running all 3 versions of Premiere Pro on our work PC (CS6, CC, and CC2014). We use this system to edit AVI's made with
Digital Rapids Stream 3.7.47. Before, we could load any AVI and it would read 'Media Pending' for a few seconds then load right up.
Now, it sits on the yellow screen and never loads. I've tried 6 or 7 different AVI's and none worked in any of the 3 versions of Premiere. The only glimmer
of hope was one loaded on After Effects CC2014, but that's it.
So, I should also mention these are 10 bit AVI's. I HAVE been able to load 8 bit AVI's but the 10 bit are all problematic in Premiere.
Please help... Deadlines approaching...
Thanks!
Mark
[email protected]

DustinMedlam, I have the same exact problem. I started using my Iphone 4S for shooting video about 2 months ago and tranferred them to my Windows machine with Windows 7. I use the clips in Sony Vegas pro 11 and make short movies. I upgraded to ios 6 last week and every video that I shoot with my iphone 4S now is not usable in Quictime or Sony Vegas???? My old videos from before ios 6 play just fine and I can use them in Sony Vegas with no problems. The only way to play the files is with Windows media player. this does me no good as I just began making short films and now I can not use any of the video I have shot since ios 6. I also have a Samsung Galaxy S2 and I shoot video with it and use the clips in Sony Vegas with no issues!?? I can not believe this is not BLOWING up on the internet like the WIFI issue is..... What do we do? All my video gear is for my Iphone not my galaxy S2. This is very annoying. I also notice that no one from Apple response to these support forums. So why are they available?? What a JOKE!

HDV, "Media Pending" and previews reverting to unrendered.

OK, I've researched this topic in various threads, and while many report the same as what I've experienced, the GREAT dissappointment is that this problem appears to have been totally neglected in the 4.1 patch. What a shame.
To revisit: When editing in HDV certain portions of sequences containing effects or transitions playback the Yellow "Media Pending" graphic even though source files play just fine AND all FX are "rendered." No changes to sources file names (i.e. - not an .xmp file link issue). No reason for this to occur at all, really. And there seems to be no apparent rhyme or reason as to when and where this ocurrs.
I can't find anyone reporting this work around: The problem goes away when you nest the sequence segment in question, but you have to re-render and re-apply FX and transitions.
Sure, restarting PPro helps, but we've been frustrated by rendered portions of the timeline mysteriously becoming unrendered.
ANYONE have a solution (other than nexting the segments in question)?
All this (post 4.1) crap still makes me want to flush PPro CS4 down the toilet. Saving up for FCP!

Removing the /3GB switch while troubleshooting has long been one of the Quick Tips in this troubleshooting page.
There are other tips than seem like no brainers, but sometimes people change a seemingly inocuous setting for some reason or other, then they forget they did it and it starts causing a problem down the line. The troubleshooting page is designed to have people check everything to ensure settings are set correctly.
Glad you found the cause of your problems and thanks for posting your success.
Cheers
Eddie

Files connect and then disconnect, give me Media Pending sign indefinitely.

Operating system: OS 10.10.1
When opening my project file, the files connect and I achieve playback for maximum 1-2 minutes.
Then the files disconnect and I get an indefinite "Media Pending" window that does not go away.
I've tried exporting an XML of my sequence and opening it in a new project. When I do this and try to import the footage, I get an error message that says "files not supported."
However, the files (RED files) are fine as I can view them in Rec Cine.
Why would my software stop recognizing files I've been editing for 2 months? What to do next?

Removing the /3GB switch while troubleshooting has long been one of the Quick Tips in this troubleshooting page.
There are other tips than seem like no brainers, but sometimes people change a seemingly inocuous setting for some reason or other, then they forget they did it and it starts causing a problem down the line. The troubleshooting page is designed to have people check everything to ensure settings are set correctly.
Glad you found the cause of your problems and thanks for posting your success.
Cheers
Eddie

Error Message for "Media Pending" or "Media Offline"

This is INCREDIBLY frustrating.
It is my job at a church to produce broadcast-quality segments for our local tv stations for 28 minute slots. I am working with HD-quality videos, bumpers, audio files, etc. It takes my PC about 30 minutes to render each segment and I work with about 4 segments a week. Add that up, and it takes me two straight hours to render each finished product (not counting any edit work), all which have to be done in a day because we broadcast most of the stuff that happens on Sunday the following Tuesday.
That said, I render the final product, after everything has been through quality-control, through encoder because of the FTP option. When I leave every Monday afternoon, I start the queue for the four segments, which, in turn, will spit out the product and FTP it to our server at the tv stations.
But when I come in Tuesday morning and find that AME has rendered four USELESS videos because, instead of informing me when I started the queue there was something wrong with fetching the video files, it decided to render some stupid stock frame of either, "Media Pending" or "Media Offline" - which makes ABSOLUTLY NO sense, for when I open premiere or after effects, it renders quite fine through AME. You can't sit here and tell me that the rendering software requires the project to be open in Premiere or AE. That would be counter productive and impossible for anyone batch-rendering.
Here is what I need: Just a simple, "Hello, there was something wrong with fetching all of the media files in your project (blank, blank, blank) - please check your project file."
Thanks!

Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Premiere Pro CC 2014 gets stuck on Media Pending.

Hi there,
I've been having a bit of trouble with PPCC 2014 opening projects then getting stuck with all my footage and assets and after effects comps just displaying with 'Media Pending'. The program still works, opens, and I can save and click around so it's not crashing but nothing loads unless I force it to relink which obviously isn't great when I'm having to edit multiple large projects. These projects still open just fine on regular old Premiere Pro CC so I will continue using that for the time being.
Media Encoder is also having an issue with After Effects comps that are in Premiere Pro timelines and only display as 'Media Pending'.
Fortunately all these issues go away if I reboot my machine and try again straight away, but having to reboot my mac just to open a project or do a export isn't exactly preferable.
I have a Mac Pro (late 2013) with 10.9.4 with 16gb Ram and a AMD D500 3GB card.
I'm just wondering if anyone has been suffering with the same issues and has come across any fixes.
Thanks in advance.

Here is my post from another thread concerning the same issue:
I got through Adobe to connect to me remotely to solve this problem twice. They cleaned the cache and preferences and renamed my Adobe folder under applications (don't exactly know how thy did it.) The problem disappeared only to come back after a little while. No video playback, unresponsive buttons - but playable audio, and media pending for all clips. I told them to report this to tech support. This was about a month ago but no updates still..I know I hadn't had this issue neither with CS6 nor with CC.
I am currently rendering my project after changing the sequence's editing mode to Quicktime ProRes Proxy to see if it will help. Preview is still preview but as you said maybe the issue is to be with preview settings set to i-frame mpeg. I have read about the mpeg importer plugin to be an issue in previous versions of premiere pro concerning issues with media pending but i might be wrong.
After changing the sequence settings to Prores Proxy (or if you don't have these codecs installed you may try another codec or google "Prores codec install" and have them installed) the problem cleared away. I have looped the timeline and played it over and over for a couple of hours without the issue surfacing.
For Adobe support and for others to know here is a wiki concerning the issue in CS5. FAQ:Why does my clip show as "media pending"? - Adobe Premiere Pro

Media pending with Encore CS6

Hello,
I have a very large project built with Premiere Pro CC.
The project has 5 "sequences" which are "rendered" before export to Media Encoder CC.
The "transcode" (max quality) runs very well but is very slow (Media Encoder does not use GPU even the "Playback Mercury Engine" is activated), this is worst without Playback Mercury Engine.
The transcoded files are imported within Encore CS6 (no dynamic link between Encore CS6 ane PP CC and no Encore CC version, Adobe decided this but with very bad reasons).
The Encore project has 5 "montages" and one "diffusion list", the menu has "animated" buttons and need to be rendered before creating the final disk (blu-ray).
But when I try the menus before creating the blu-ray disk I obtain :
- media pending message : the audio track is there but the video track appears lated and is not smooth,
- the animated button of menus are very curious : some are correct but others flash in red or green.
- the software Encore freeze with a white screen, then the job may be resume,
- the "complete title" begins normally then the video disappears but not the audio, after 10 seconds the video appears but seems to be frozen.
I checked the links of chapters and buttons, all works normally. The project checking give no error.
I never encountered this with Premiere Pro CS6 and Encore CS6 (dynamic link works).
How can I fix this strange situation without discarding PP CC and migrate to FCPX ?

Hello,
Many thanks for your very long reply and your interest in my problems.
I shall try to answer you :
- 1) OS : Windows 7 64 bits Pro SP1, french,
                 Version : 6.1.7601.18247 (Win7RTM)
                 Framework.NET : 4.0.30319.18408 built by : FX451RTMGREL)
                 DirectX : 11.0,
                 OpenGL : 6.1.7600.16385 (Win7_rtm.090713-1255).
- 2) Yes the media pending goes away but after a couple of minutes (one
year ago I was using PP CS6 and Encore CS6, I never had this problem
even with very long files),
- 3) Yes my GPU driver is updated (Nvidia GeForce 332.21 dated 12/19/2014).
I never had thiese problems with PP CS6 + Encore CS6 and my projects
built with these PP ans Encore version were with the same structure and
length (in PP CS6 : sequences up to 45 minutes, in Encore CS6 chapters
up to the same time).
The difference between are in my hardware :
- the RAM was upgraded from 12 GB to 24 GB,
- the CPU was overclocked from 3,2 GHz (default) to 3,88 GHz).
- 4) I shall try up to the disk burn to check if the problem is just due
to display of "animated buttons".
I hope my answer will be usefull for you.
Regards,
Jacques Gourier.
Le 11/02/2014 19:53, Stan Jones a écrit :
>
      Re: Media pending with Encore CS6
created by Stan Jones <http://forums.adobe.com/people/Stan+Jones> in
/Encore/ - View the full discussion
<http://forums.adobe.com/message/6110278#6110278

Media pending with adjustement layer CC 2014

Hi,
I have so many problem with adobe premiere pro CC 2014
- Media pending with adjustment layer track and some Red giant effects on it. Impossible to rendering ! Please, what the problem ?
- I loose sound sometimes during playback, I can not hear anything.
- Sound make a big noise sometimes, like a 1khz but not exactly. It appears when I go up the volume after adding gain or push up the volume in effect control.
Have you got solutions please ?
Thank you

>What to do?
Start by asking in a forum that is specific to your program... what program are you talking about?
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Slow/unresponsive video playback, media pending, after CC'14 October update

Encountering a strange issue after the October update. It's a project carried over from the previous CC'14 version, nothing crazy, about an 18 minute timeline of video/.mov clips straight off a JVC GY-HM600U with simple RGB curves/masks on some clips, some Prores422 clips of graphics exported out of After Effects, a couple nested sequences featuring simple text w/ cross dissolves, and a lower 3rd Quicktime with RGB+Alpha. There are some linked AE comps in the project but not in the sequence. Ran fine before update. Here's my system, obviously no CUDA so Mercury Playback is software only:
Upon opening the project everything is fine, playback is smooth, scrubbing from beginning to end no problem. After a period of time, 10-15 minutes? Suddenly video playback hangs up, with audio continuing to play after . Opening a clip in the Source window displays the Media Pending thumbnail, after 15 seconds it seems to find the media but again it's only a still frame with video hanging up. Then audio seems to hang up and I can't do anything. I can still manipulate the UI but scrubbing through the timeline is completely unresponsive, pressing play does nothing.
Quitting the program seems to freeze it, the window closes but it stays lit up in my dock and shows Application Not Responding, causing me to force quit.
A system reboot yesterday seemed to clear the issue up for the remainder of the work day but it's back today. Not sure where the issue is coming from, but seems like some kind of memory leak or something similar since it seems to be a gradual degradation in performance. I'll have to roll back to a previous version to finish up this project until things are fixed.

Hello,
Many thanks for your very long reply and your interest in my problems.
I shall try to answer you :
- 1) OS : Windows 7 64 bits Pro SP1, french,
                 Version : 6.1.7601.18247 (Win7RTM)
                 Framework.NET : 4.0.30319.18408 built by : FX451RTMGREL)
                 DirectX : 11.0,
                 OpenGL : 6.1.7600.16385 (Win7_rtm.090713-1255).
- 2) Yes the media pending goes away but after a couple of minutes (one
year ago I was using PP CS6 and Encore CS6, I never had this problem
even with very long files),
- 3) Yes my GPU driver is updated (Nvidia GeForce 332.21 dated 12/19/2014).
I never had thiese problems with PP CS6 + Encore CS6 and my projects
built with these PP ans Encore version were with the same structure and
length (in PP CS6 : sequences up to 45 minutes, in Encore CS6 chapters
up to the same time).
The difference between are in my hardware :
- the RAM was upgraded from 12 GB to 24 GB,
- the CPU was overclocked from 3,2 GHz (default) to 3,88 GHz).
- 4) I shall try up to the disk burn to check if the problem is just due
to display of "animated buttons".
I hope my answer will be usefull for you.
Regards,
Jacques Gourier.
Le 11/02/2014 19:53, Stan Jones a écrit :
>
      Re: Media pending with Encore CS6
created by Stan Jones <http://forums.adobe.com/people/Stan+Jones> in
/Encore/ - View the full discussion
<http://forums.adobe.com/message/6110278#6110278

Premiere CC 2014 'Media Pending' & constant hanging/crashing

I have a Macbook Pro retina, using Canon 5D mk3 footage.
I am working on a few projects and keep experiencing a problem where the program monitor will just 'hang' on a certain frame during playback, other times (less often) will display 'media pending'. In either case, once that happens, there is no going back. I can still save the project, close and open the program monitor, playback works for audio .. but no playback of video. Sometimes it crashes completely.
Most of the time I have to save and then quit, and then load up Premiere again. Although it sometimes hangs after about 1 minute of use. I think I have restarted about 20 times in the last 2 hours - its ridiculous.
- I have tried emptying cache / media cache etc
- I have tried copying the sequence and pasting into a totally new project only to find the same problems come up eventually
- This is a new install of premiere on a new install of Yosemite (no preferences applied yet)
- It seems worse when there are multiple video tracks
- Can I get a refund for this month of CC? My videos have taken twice as long as they should have because of the bugs in this program.
- I'm serious

You're not the only one having these issues. There are couple of threads under adobe forums regarding this issue. Couple of users solved their problem by unchecking the labels regarding XMP under preferences-media.
I'm on latest mountain lion and also deleted the cache manually under the common folders. Have multiple layers and haven't had issues prior using PR CC 2014 on the same project.
Same problem as yours, no video only audio playback, unresponsive behaviour and eventually a crash on quit which I have to force quit.

1 second media pending, random occur

CS5 on Win7 64Bit, 6.4GB RAM reserved for CS5, Quadcore 2.4, all data on internal HDD, all Cachefiles and other Data in Projectfolders.
1440x1080 (1.3333) Project, 25 fps, PAL, 48000Hz, 1.5hours duration, 69 different Objects, biggest 9.2GB, mpeg, m2ts, mp3, wav
I exported the movie with CS5 Mediaencoder in PAL, 1280x720, 25 fps, Quality 4.0, MPEG, 384Kbit/s, 48kHz, 16 Bit, Stereo, VBR, 1-Pass, Min. 4.00, Goal 10.00, Max 18.50 MBit/s
Random "Media Pending" screen appears for one second in the exported file which is flawless apart from that. They don't appear in the premiere editor though. The preview never has the media pending screens.
I did found out though, that they appear mostly whenever it jumps from a little object to the big objects. I used 4 cameras of which one was on a tripod recording line in sound and the stage from above. so if I use one of the other cameras to cover the part where "Media Pending" occurs, then it gets only shifted to the point where I stopped covering it, but again only for one second, eventhough its the same object just a bit later.
solutions anyone?
Philipp

Welcome to the forum.
Media Pending means just that - the program is processing some aspect of the media in use. There could be several reasons for this. The program could be Indexing the material. This happens with MPEG material most often. This ARTICLE will give you a bit more background.
It could also be that some other program, like Windows Indexing is locking the material, and PrPro cannot access it at that moment. This ARTICLE will give you a bit of background on that.
There are probably a few other causes, and maybe others will chime in with some of those.
Good luck,
Hunt

Delay on playback when switching between Sequences (Media Pending)

Hello guys,
I'm growing quite frustrated with Premiere CC lately.
So I am running CC on a Desktop PC. Core elements are : Asus X-79 Deluxe, Intel i7 4930K, 32gb ram, Geforce Titan.
OS (Win 8.1) and CC are running on a SSD. Footage is on internal 7200rpm HHDs.
All other softwares (mostly Davinci and Red Cine) are working perfectly, fast, no crash what-so-ever. So I thought the system was working fine. But Premiere is a nightmare and I'm trying to figure out where it can come from.
Some issues appeared recently, on the latest version, and I did not have in the previous ones.
First, I was facing a huge problem when simply opening clips from the Project window into the Source player. I usually had a 30-second "Media Pending" every time. When working with 1000+ files, it was simply impossible to work. Weirdly enough, I found a trick : when opening the first clip, I would have this Media Pending issue, but (that's where it gets funny), if I did not play the clip, just stay on the first frame, and opened a second one right away, then the second one wouldn't have the Media Pending issue. As long as I stayed on Frame 1 of each clip, I could open the next one without any issue. Then, once I navigate in those "pre-opened" clip, they'd play fine, without delay. But again, if I went a bit further and opened a new clip (not previously pre-opened) I'd have to go through 30 seconds of Media Pending again. F*** annoying. But whatever, I just had to open all clips before starting editing and then it would work.
But now, I have a very similar issue when I edit further on. Especially if I have several sequences, every time I move from one sequence to the next, it would take several seconds before the video (on the Program Player) would appear. Most of the time, the player just stays black, but a couple of times, I got the Media Pending screen again.
Then, once this is passed, the playback is all over the place. The most common problem is that the video plays, but if I press stop, the cursor stops on the timeline (the UI reacts to what I do) but the video keeps playing.... and I can press stop like a maniac, it stops playing like 20 seconds later... The UI still reacts, I can navigate menus etc... but the video just keeps playing. I have to wait several seconds before being able to work again.
I've tried a lot of things : changing the footage to a different disk, updating Video drivers. I suspect it is related to a fairly new function cause I never had these problems on the previous Premieres (the pre 2014.2 version). But right now, I just missed the deadline of a client today because the program was being so slow. You can imagine I feel a bit stressed.
Let me know if you have experienced stuff like this before, or if you had any idea where it can come from, I would really appreciate your help!
Thanks a lot!
Cédric

Yes of course, I know it's mostly the frustration talking, but unfortunately the issues with the software are important enough to affect my job a lot.
And they are still here, I'm really trying different solutions, especially since they appeared recently, they must be linked to a new feature somewhere in Premiere. Any idea what it could be? It working absolutely fine on Premiere pre-2014.2.
Now I open my almost finished sequence, and when I drag the cursor across the sequence, every time it's on a new clip, it freezes for a while. A few seconds. Then that clip plays fine. I move to another shot and it's the same, the video freezes for a while (UI still reacts normally). If I try to just press play, it plays the shots that i already when over, but if there is a new one, the video freezes, sound continues, and I can press stop as many times as I want, it keeps playing.
Once I have finally gone once over every shot, then the video plays absolutely fine. So I guess it has to do with a cache option. But tried cleaning the cache, moving the scratch disk to a different disk (now it's on a internal ssd, should be fast!) but to no avail..
At this point, I feel the last 3 options I have is :
- finish my current projects, and try an entire new workflow for the following ones, and use something else than the MXF container
- or, finish my current projects then move to Avid
- rebuild my entire system to see if that changes anything

Importing MPG files - media pending?

Hi Guys,
Have only just started using PE11 and have editted some footage from my Gopro ( mp4 files ) and my Intova ( mov files ) with ease. I just tried to edit some of my older footage take around two years ago from a digital video camera which have mpg files and are unable to import them into premier elements.
They appear in the timeline showing the correct file duration but the media display shows 'Media Pending' in several different languages. There also isn't any audio. I have tried waiting 30 minutes without any change. My computer was able to load the previous file types which were considerably larger instantly.
I have the mpg files in my docs same as the other files. I'm able to play the mpg videos with media player on my computer without any problems. Is there anyway of being able to import these into premier elements 11. I have quite alot of this footage I want to edit which was I bought this program in the first place? A solution to this would be very much appreciated. Thanks.

Pointy1
Your mention of two copies of each file caught my curiosity.
Is the .mpg of the two that same exact footage as the one with the .tod file extension?
What are the properties of each?
Is the MediaInfo properties readout the same for both?
http://mediainfo.sourceforge.net/en
Congratulations on moving forward with your project. Good work.
ATR

Freezing Playback, Media Pending, No Saved Prvw Files -on Pr 6 Cloud.

Freezing Playback, Media Pending, No Saved Prvw Files -on Pr 6 Cloud.
My Creative Cloud Pr 6 is freezing video on the timeline and it's driving me crazy. Can't work all day. I've checked all my system settings and all seem to be okay. Running Creative Cloud on Win 7. 16GB RAM with 12GB dedicated for Pr, Ae, Ps etc. 138GB free on C Drive and 1TB free on project drive. I'm working with HDV video from Panasonic HMC150 1080/60i and 1080/30p. What's wrong and what can I do? I just found out there are no "Saved Preview Files" in the Pr Preview folder. "Media Pending" constantly showing when attempting to playback from timeline, even with 1/4 or 1/2 playback resolution. Timeline video display head showing thumbnail of a completely different video clip. My video card (EVGA GTX 580) is getting hot excessively. It's inbuilt fan is ok. All system fans are ok. I had to put extra fans on it. Product update issue or what? Thank you. I need help.

Hello Jim.
Thanks again for the link. I thought that would help but I started another project and the timelinve video was freezing on a 10 minute AVCHD clip.
It even freezes on a 2 minute clip, so spanning is not the cause of the problem. My system is running on only 6Gb of my 16Gb RAM, so memory is not the issue.
What else can be the problem?
Meanwhile, my C Drive is filling up real fast with Pr cache files. I deleted the ccache file in it's folder and cleaned up cache files through Pr. Could that be the problem?
Most of the clips I'm working with were imported before the cache cleanup/delete. Even at that, the cache folder has grown about 80GB after the cleanup?
I mostly use Pr, Ps and En, Ae once in a while.
Thanks

Media Pending and Pending and Pending

Similar Messages

Maybe you are looking for